☆ 4.7 Article

Intrinsically lighting absorptive PANI/MXene aerogel encapsulated PEG to construct PCMs with efficient photothermal energy storage and stable reusability

SOLAR ENERGY MATERIALS AND SOLAR CELLS (2023)

Related references

Note: Only part of the references are listed.

Article Materials Science, Multidisciplinary

Hierarchical Ni-plated melamine sponge and MXene film synergistically supported phase change materials towards integrated shape stability, thermal management and electromagnetic interference shielding

Ziling Cheng et al.

Summary: In this study, shape-stabilized composite phase change materials (PCMs) were successfully fabricated using MXene, nickel-platted melamine sponge, regenerated cellulose, graphene nanoplate, and polyethylene glycol. The composite PCMs exhibited excellent shape stability, high thermal conductivity, and effective electromagnetic interference shielding performance, making them promising for applications in electronic packaging and advanced energy.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2023)

Add to Collection

Article Chemistry, Physical

Experimental design of composite films with thermal management and electromagnetic shielding properties based on polyethylene glycol and MXene

Dengji Xu et al.

Summary: In this study, a novel composite material was developed by using MXene as the skeleton, filling phase change material polyethylene glycol (PEG), and adding flame retardant Mg(OH)(2). The composite material exhibited excellent EMI SE performance and flame retardancy. It had high thermal conductivity, certain mechanical properties, and good shape stability due to the capillary function of MXene.

CARBON (2023)

Add to Collection

Article Engineering, Environmental

Ni@rGO into nickel foam for composite polyethylene glycol and erythritol phase change materials

Ruiying Yang et al.

Summary: In this study, shape-stabilized composite phase change materials (CPCMs) with high solar-thermal conversion efficiency and thermal storage capacity were developed. The use of Ni@rGO nanosheets filled into nickel foam skeletons as the carrier for loading PEG and ET improved the shape stability, thermal storage density, and thermal conductivity of CPCMs. The decorated Ni nanoparticles on the rGO support further improved the thermal conductivity and conversion efficiency of CPCMs. The optimized CPCMs showed promising potential for solar energy utilization and thermal management.

CHEMICAL ENGINEERING JOURNAL (2023)

Add to Collection

Article Thermodynamics

Cellulose nanofibrous/MXene aerogel encapsulated phase change composites with excellent thermal energy conversion and storage capacity

Bingqing Quan et al.

Summary: By utilizing cellulose nanofibers, MXene, PEG, and Fe3O4, a series of phase change composites (PCCs) with excellent solar/magnetothermal conversion properties were successfully prepared using simple freeze-drying and vacuum impregnation techniques. These PCCs exhibited high conversion efficiencies, thermal stability, and practical application value.

ENERGY (2023)

Add to Collection

Article Nanoscience & Nanotechnology

Multifunctional Phase Change Composites Based on Elastic MXene/Silver Nanowire Sponges for Excellent Thermal/Solar/Electric Energy Storage, Shape Memory, and Adjustable Electromagnetic Interference Shielding Functions

Ying-jie He et al.

Summary: The study developed multifunctional PCM composites with excellent performance in heat energy storage, shape memory, and electromagnetic interference (EMI) shielding. The composites exhibit high latent heat storage, light-actuated shape memory, and adjustable EMI shielding effectiveness, making them suitable for military and aerospace applications.

ACS APPLIED MATERIALS & INTERFACES (2022)

Add to Collection

Article Chemistry, Physical

Plasmonic Metal Nanoparticle Loading to Enhance the Photothermal Conversion of Carbon Fibers

Muwei Ji et al.

Summary: This study reports the combination of carbon fibers (CFs) and metal nanoparticles (NPs) with a localized surface plasma resonance (LSPR) effect to enhance the efficiency of photothermal conversion. The heat localization and LSPR effect of metal nanoparticles are considered the main reasons for the improved photothermal conversion.

JOURNAL OF PHYSICAL CHEMISTRY C (2022)

Add to Collection

Article Energy & Fuels

Form-stable phase change nanocapsules with photo and electric dual responses for multipurpose applications in energy storage and conversion

Liqing Cheng et al.

Summary: The study presents the design and construction of photo-thermal and electro-thermal dual-responsive nanocapsules, IPW@CLPS@PPy, which exhibit good shape stability, ideal phase change enthalpy, excellent thermal stability, and cyclability. The PPy functional outlayer provides the nanocapsules with excellent solar light absorption capacity and electrical conductivity, resulting in ideal photo-thermal and electro-thermal conversion efficiency.

SOLAR ENERGY MATERIALS AND SOLAR CELLS (2022)

Add to Collection

Article Chemistry, Multidisciplinary

Functional Unit Construction for Heat Storage by Using Biomass-Based Composite

Jingtao Su et al.

Summary: This study focuses on the design and construction of a functional unit for heat storage by using sugarcane-based shape stabilized phase change materials (SSPCMs). The SSPCMs demonstrate excellent thermal properties, including high melting enthalpy and thermal conductivity, making them suitable for thermal energy storage applications.

FRONTIERS IN CHEMISTRY (2022)

Add to Collection

Article Thermodynamics

Polyimide/phosphorene hybrid aerogel-based composite phase change materials for high-efficient solar energy capture and photothermal conversion

Zhiheng Zheng et al.

Summary: This study developed a novel phase-change composite material based on polyimide/phosphorene hybrid aerogel and polyethylene glycol, which showed enhanced solar light absorption, high photothermal conversion efficiency, and good thermal stability. It provides a promising strategy for the design of high-performance composite PCM materials for efficient utilization of solar energy.

APPLIED THERMAL ENGINEERING (2022)

Add to Collection

Article Engineering, Manufacturing

In situ preparation of light-driven cellulose-Mxene aerogels based composite phase change materials with simultaneously enhanced light-to-heat conversion, heat transfer and heat storage

Heng Wang et al.

Summary: In this study, polyethylene glycol/MXene-cellulose aerogels fs-CPCMs with enhanced light-to-heat conversion, heat transfer, and storage were prepared using freezing casting and in situ encapsulation. The light-to-heat conversion efficiency of PMC fs-CPCMs reached 91.6% due to the presence of MXene. Dispersed MXene improved the heat transfer, and in situ encapsulation prevented reduction in latent heat.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2022)

Add to Collection

Article Engineering, Multidisciplinary

Enzymolysis-treated wood-derived hierarchical porous carbon for fluorescence-functionalized phase change materials

Yaqiong Li et al.

Summary: The current obstacles hindering the development and industrial application of phase change materials (PCMs) include low thermal conductivity, high cost, leakage, and poor mechanical performance. This study aims to enhance the thermal conductivity and power capacity of PCMs by using abundant biomass-derived carbon as supports. Cellulase is used to hydrolyze cellulose in wood and create micropores, which leads to effective construction of adsorption sites during the subsequent pyrolysis process. The resulting hierarchical porous carbon infiltrates polyethylene glycol (PEG) and enhances crystallization. This strategy combines good mechanical performance, high energy storage capacity, anisotropic thermal conductivity, and improved thermal stability. Furthermore, the composite PCMs loaded with carbon quantum dots (CQDs) integrate fluorescent function and thermal energy storage, providing potential applications in specific equipment.

COMPOSITES PART B-ENGINEERING (2022)

Add to Collection

Article Thermodynamics

Effective use of geothermal energy for hydrogen production: A comprehensive application

G. Kubilay Karayel et al.

Summary: This study investigates the geothermal energy potential for green hydrogen production in Turkey. The geothermal energy potential varies based on the location and underground resources of each city. Alkaline electrolysers are used for water splitting and hydrogen production. The estimated total hydrogen production potential for Turkey using geothermal resources is 559.76 kilotons, with Aydin, Manisa, and Denizli having the largest potentials. The study highlights the role of geothermal energy in making Turkey a leader in this field and provides a base for planning and developing new energy policies.

ENERGY (2022)

Add to Collection

Review Polymer Science

A review of etching methods of MXene and applications of MXene conductive hydrogels

Can Zhou et al.

Summary: This paper reviews the etching methods, synthesis strategies and applications of MXene, and provides an outlook on its future development.

EUROPEAN POLYMER JOURNAL (2022)

Add to Collection

Article Energy & Fuels

3D zirconium phosphate/polyvinyl alcohol composite aerogels for form-stable phase change materials with brilliant thermal energy storage capability

Weijie Li et al.

Summary: Leakage seriously limits the practical application of phase change materials, but by preparing e-ZrP@PVA aerogel, leakage can be prevented and the thermal energy storage property of CPCMs can be improved, showing promising application potential.

SOLAR ENERGY MATERIALS AND SOLAR CELLS (2022)

Add to Collection

Article Energy & Fuels

Biomass porous potatoes/MXene encapsulated PEG-based PCMs with improved photo-to-thermal conversion capability

Yu Fang et al.

Summary: Encapsulated phase-change materials (PCMs) have been widely studied in solar thermal energy storage. This study successfully synthesized a series of potatoes phase-change materials (PPMs) through vacuum impregnation method and introduced MXene nanosheets. The results showed improved photo-to-thermal conversion efficiency and PEG adsorption rate in the PPMs.

SOLAR ENERGY MATERIALS AND SOLAR CELLS (2022)

Add to Collection

Article Energy & Fuels

Facile preparation of reversible thermochromic phase change materials towards temperature-controlled information storage and self-reporting

Hualiang Xu et al.

Summary: Phase change materials (PCMs) are widely used for thermal energy management due to their high latent heat and efficient energy utilization. However, current studies mainly focus on the single function of thermal storage, limiting their advanced applications. In this study, we developed novel reversible thermochromic phase change materials (TCFPs) that can achieve multiple functions, including temperature-controlled information storage and self-reporting.

JOURNAL OF ENERGY STORAGE (2022)

Add to Collection

Article Nanoscience & Nanotechnology

Constructing nickel chain/MXene networks in melamine foam towards phase change materials for thermal energy management and absorption-dominated electromagnetic interference shielding

Haoran Cheng et al.

Summary: Phase change materials (PCMs) are ideal for thermal management in miniaturized and integrated electronic devices. However, developing PCMs with efficient thermal management and electromagnetic interference (EMI) shielding has remained a challenge. In this study, a continuous thermal/conductive network was built on a melamine foam template using magnetized nickel (Ni)/MXene (NiM) through dip-coating, and then polyethylene glycol (PEG) was encapsulated into porous NiM/MF hybrid sponge via vacuum impregnation method. The resulting NiM/PCM exhibited suitable thermal conductivity, high electrical conductivity, excellent EMI shielding effectiveness, as well as outstanding thermal stability and high latent heat storage capabilities.

ADVANCED COMPOSITES AND HYBRID MATERIALS (2022)

Add to Collection

Article Energy & Fuels

High enthalpy efficiency lignin-polyimide porous hybrid aerogel composite phase change material with flame retardancy for superior solar-to-thermal energy conversion and storage

Jintao Huang et al.

Summary: In this study, PCMs (ZrP-PI@PEG) with excellent thermal energy storage, solar-to-thermal conversion, and flame retardancy were successfully fabricated. The results showed that ZrP-PI@PEG exhibits high adsorption ratio, outstanding latent heat, and reduced flame retardant index. Furthermore, it demonstrated good thermal stability and reliability in leakage experiment and thermal cycling test.

SOLAR ENERGY MATERIALS AND SOLAR CELLS (2022)

Add to Collection

Article Energy & Fuels

Anisotropic reed-stem-derived hierarchical porous biochars supported paraffin wax for efficient solar-thermal energy conversion and storage

Shu Tian et al.

Summary: Developing and utilizing cheap and widely available biowaste for high-value phase change energy storage is valuable. In this study, reed stems were processed to connect macropore channels through carbonization and enriched micropores. By impregnating with paraffin wax, shape-stable composite phase change materials (CPCMs) with a three-dimensional multi-level pore structure were obtained. The CPCMs exhibited high loading rate, energy storage capacity, and good heat transfer performance. Furthermore, this work contributes to energy saving and carbon emission reduction.

JOURNAL OF ENERGY STORAGE (2022)

Add to Collection

Article Energy & Fuels

One-step construction of novel phase change composites supported by a biomass/MXene gel network for efficient thermal energy storage

Yan Cao et al.

Summary: A one-step strategy to construct shape-stable biomass/MXene phase change composites (SMPCCs) with excellent solar thermal conversion capability and thermal reliability is reported. The SMPCCs show high temperature elevation and efficient solar energy storage. They also exhibit negligible decline in thermal energy storage property even after multiple cooling-heating and light-thermal cycles. This work provides a simple and effective approach for fabricating biomass-based phase change composites with great potential for solar thermal energy storage applications.

SOLAR ENERGY MATERIALS AND SOLAR CELLS (2022)

Add to Collection

Article Energy & Fuels

Preparation of porous titanium dioxide foam impregnated with polyethylene glycol as shape-stable composite phase change materials

Siyi Zhao et al.

Summary: A novel shape-stabilized composite phase change material was prepared using PTF as the carrier material and PEG as the phase change material. The study investigated the heat storage performance, non-isothermal crystallization process, and the effect of the 3D fully interconnected pore structure of PTF on PEG's phase change behavior and thermal conductivity. The results showed that the composite material had good chemical compatibility, thermal reliability, and thermal stability.

JOURNAL OF ENERGY STORAGE (2022)

Add to Collection

Article Nanoscience & Nanotechnology

Flame-retardant and leakage-proof phase change composites based on MXene/polyimide aerogels toward solar thermal energy harvesting

Yan Cao et al.

Summary: In this study, innovative leakage-proof phase change composites (PCCs) with excellent solar thermal conversion capability and superior flame retardancy were successfully developed. The PCCs showed high PEG loading capacity and enthalpy, and exhibited outstanding flame retardant properties.

ADVANCED COMPOSITES AND HYBRID MATERIALS (2022)

Add to Collection

Article Energy & Fuels

The spatial and temporal mismatch phenomenon in solar space heating applications: status and solutions

Datong Gao et al.

Summary: This paper focuses on the spatial and temporal mismatch between solar energy resources and heating load in solar space heating applications, examines possible solutions, and presents policy outlook. It is suggested to address this issue from both the supplement and demand sides.

APPLIED ENERGY (2022)

Add to Collection

Article Energy & Fuels

An innovative phase change composite with high thermal conductivity and sensitive light response rate for thermal energy storage

Jintao Huang et al.

Summary: Paraffin-based organic phase change materials have been widely used in thermal-energy storage systems due to their high latent thermal capacity. However, their use in the storage of solar thermal energy has been limited due to the risk of leaks, low thermal conductivity, and low light-to-thermal conversion capacity. To address these issues, a novel bio-based shape-stable organic phase change composite (SSOPCC) was developed by encapsulating paraffin C22 with a double-supporting component and improving the thermal conductivity and light response rate. The SSOPCCs exhibited improved thermal conductivity and enhanced light-to-thermal conversion ability, making them suitable for solar energy storage and conversion applications.

SOLAR ENERGY MATERIALS AND SOLAR CELLS (2022)

Add to Collection

Review Energy & Fuels

Recent advances and impact of phase change materials on solar energy: A comprehensive review

Surajudeen Sikiru et al.

Summary: This study provides a cutting-edge review of recent literature on thermal energy storage systems for solar thermal management. It also gives an in-depth overview of solar thermal storage mechanisms and reviews the application of phase change materials (PCM) and photovoltaic performance indicator variables. The study summarizes the research trend and research gap in PCM adoption to photovoltaic energy harnessing.

JOURNAL OF ENERGY STORAGE (2022)

Add to Collection

Article Engineering, Manufacturing

Biomass-based carbon aerogel/Fe3O4@PEG phase change composites with satisfactory electromagnetic interference shielding and multi-source driven thermal management in thermal energy storage

Rongbiao Shen et al.

Summary: By using biomass-based carbon aerogels as porous supporting materials, magnetic Fe3O4@polyethylene glycol was encapsulated to obtain shape-stable composites with excellent thermal storage capability and EMI shielding effectiveness. The addition of Fe3O4 achieved satisfactory EMI shielding effectiveness, and the composites exhibited outstanding performance in multi-source driven thermal management.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2022)

Add to Collection

Proceedings Paper Materials Science, Multidisciplinary

A review on tidal energy technologies

Chirag Shetty et al.

Summary: Renewable energy sources, particularly tidal energy, have gained significant popularity due to the increasing demand for cleaner and more sustainable energy. Despite not being widely utilized at present, with further research and development, tidal energy has the potential to serve as a viable alternative to meet our energy needs.

MATERIALS TODAY-PROCEEDINGS (2022)

Add to Collection

Article Nanoscience & Nanotechnology

Improving thermal conductivity of ethylene propylene diene monomer/paraffin/expanded graphite shape-stabilized phase change materials with great thermal management potential via green steam explosion

Xinpeng Hu et al.

Summary: The EPDM/PW/EG SSPCMs fabricated via steam explosion method show enhanced thermal conductivity, allowing faster heat absorption and dissipation for improved thermal management properties. Additionally, these materials exhibit excellent shape recovery properties and adaptability.

ADVANCED COMPOSITES AND HYBRID MATERIALS (2021)

Add to Collection

Article Engineering, Multidisciplinary

Biomass-based shape-stabilized phase change materials from artificially cultured ship-shaped diatom frustules with high enthalpy for thermal energy storage

Bangyao Wu et al.

Summary: The study focused on preparing ship-shaped diatom frustule-based composite ss-PCMs with high PEG absorption capacity for thermal energy storage. The research found that diatom frustules calcined at 400 degrees Celsius had a suitable specific surface area for PEG support.

COMPOSITES PART B-ENGINEERING (2021)

Add to Collection

Article Engineering, Manufacturing

Novel flexible polyurethane/MXene composites with sensitive solar thermal energy storage behavior

Shang Gong et al.

Summary: The study developed flexible polyurethane/MXene solid-solid phase change materials with improved solar-to-thermal conversion efficiency and mechanical strength. The materials exhibited leakage-proof properties and excellent stability after thermal and light cycling tests, suggesting potential applications in solar thermal energy storage.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2021)

Add to Collection

Article Energy & Fuels

Improving the thermal energy storage capability of diatom-based biomass/polyethylene glycol composites phase change materials by artificial culture methods

Jintao Huang et al.

Summary: A novel shape-stabilized phase change material (SSPCM) made from polyethylene glycol (PEG) and diatom-based biomass was reported. The SSPCM showed good phase change performance and thermal stability, making it suitable for waste heat recovery and temperature regulation applications.

SOLAR ENERGY MATERIALS AND SOLAR CELLS (2021)

Add to Collection

Article Materials Science, Composites

Light-actuated shape memory and self-healing phase change composites supported by MXene/waterborne polyurethane aerogel for superior solar-thermal energy storage

Wen-wen Hu et al.

Summary: A flexible water-borne polyurethane (WPU)/MXene aerogel was utilized as a supporting scaffold to confine polyethylene glycol (PEG) for the fabrication of photo-driven and flexible phase change material (PCM) composites. The resulting PCM composites showed excellent solar-thermal energy conversion and storage capability, as well as light-actuated shape memory and self-healing functions, due to the unique structure and properties of the materials used.

COMPOSITES COMMUNICATIONS (2021)

Add to Collection

Article Engineering, Environmental

Anisotropy-functionalized cellulose-based phase change materials with reinforced solar-thermal energy conversion and storage capacity

Yaqiong Li et al.

Summary: By utilizing porous cellulose nanofibril (CNF)/silver nanowire (AgNW) hybrid supporting materials and directional freeze-drying, as well as encapsulating phase change materials through vacuum impregnation, this study successfully improved the thermal conductivity of composite PCMs and obtained thermally stable materials for solar energy harvesting.

CHEMICAL ENGINEERING JOURNAL (2021)

Add to Collection

Article Materials Science, Composites

MXene confined in shape-stabilized phase change material combining enhanced electromagnetic interference shielding and thermal management capability

Houbao Liu et al.

Summary: New high-performance phase change composites have been developed, with MXene confined in shape-stabilized phase change material (PCM) to achieve high EMI shielding effectiveness and efficient thermal management simultaneously. MXene shields electromagnetic radiation effectively by converting it into heat consumption, while PCM enables efficient heat absorption through a phase change process and MXene enhances the thermal conductivity of the composite for heat dissipation.

COMPOSITES SCIENCE AND TECHNOLOGY (2021)

Add to Collection

Article Energy & Fuels

Random copolymer of poly(polyethylene glycol methyl ether)methacrylate as tunable transition temperature solid-solid phase change material for thermal energy storage

Piyachai Khomein et al.

Summary: This study successfully developed solid to solid phase transition polymeric PCM with tunable transition temperature ranged from 18°C to 35°C, suitable for building envelop applications. The copolymerization strategy was utilized to adjust Tt with minimum impact on energy density, providing new insights into the relationship between crystal structure and Tt of different copolymer compositions.

SOLAR ENERGY MATERIALS AND SOLAR CELLS (2021)

Add to Collection

Article Energy & Fuels

Lignin-assisted construction of well-defined 3D graphene aerogel/PEG form-stable phase change composites towards efficient solar thermal energy storage

Dan Wei et al.

Summary: By using lignin as a modifier, the absorption and thermal efficiency of graphene aerogel were significantly improved, and a three-dimensional porous structure with homogeneous distribution of lignin was constructed, showing great potential in energy storage and thermal management applications.

SOLAR ENERGY MATERIALS AND SOLAR CELLS (2021)

Add to Collection

Article Energy & Fuels

MXene aerogel-based phase change materials toward solar energy conversion

Pengcheng Lin et al.

SOLAR ENERGY MATERIALS AND SOLAR CELLS (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Ti3C2Tx@PDA-Integrated Polyurethane Phase Change Composites with Superior Solar-Thermal Conversion Efficiency and Improved Thermal Conductivity

Xiaosheng Du et al.

ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2020)

Add to Collection

Article Energy & Fuels

A novel polyaniline (PANI)/paraffin wax nano composite phase change material: Superior transition heat storage capacity, thermal conductivity and thermal reliability

Mathew George et al.

SOLAR ENERGY (2020)

Add to Collection

Article Energy & Fuels

Three-dimensional rGO@sponge framework/paraffin wax composite shape-stabilized phase change materials for solar-thermal energy conversion and storage

Zhang Tao et al.

SOLAR ENERGY MATERIALS AND SOLAR CELLS (2020)

Add to Collection

Article Energy & Fuels

Long-term thermophysical behavior of paraffin wax and paraffin wax/polyaniline (PANI) composite phase change materials

Mathew George et al.

JOURNAL OF ENERGY STORAGE (2020)

Add to Collection

Review Green & Sustainable Science & Technology

The past, present and potential of hydrogen as a multifunctional storage application for wind power

Dimitrios Apostolou et al.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2019)

Add to Collection

Article Energy & Fuels

Preparation and thermal energy storage properties of erythritol/polyaniline form-stable phase change material

Yu-Hang Chen et al.

SOLAR ENERGY MATERIALS AND SOLAR CELLS (2019)

Add to Collection

Article Engineering, Multidisciplinary

Novel light-driven and electro-driven polyethylene glycol/two-dimensional MXene form-stable phase change material with enhanced thermal conductivity and electrical conductivity for thermal energy storage

Xiang Lu et al.

COMPOSITES PART B-ENGINEERING (2019)

Add to Collection

Article Green & Sustainable Science & Technology

Preparation and characterization of GO/PEG photo-thermal conversion form-stable composite phase change materials

Min Li et al.

RENEWABLE ENERGY (2019)

Add to Collection

Article Energy & Fuels

Bacterial cellulose/MXene hybrid aerogels for photodriven shape-stabilized composite phase change materials

Lisheng Tang et al.

SOLAR ENERGY MATERIALS AND SOLAR CELLS (2019)

Add to Collection

Article Chemistry, Physical

MXene Ti3C2Tx for phase change composite with superior photothermal storage capability

Xiaoqiao Fan et al.

JOURNAL OF MATERIALS CHEMISTRY A (2019)

Add to Collection

Article Energy & Fuels

Optimization on the photo-thermal conversion performance of graphite nanoplatelets decorated phase change material emulsions

Fangxian Wang et al.

SOLAR ENERGY MATERIALS AND SOLAR CELLS (2018)

Add to Collection

Article Engineering, Multidisciplinary

Phytic acid assisted fabrication of graphene/polyaniline composite hydrogels for high-capacitance supercapacitors

Jiawen Ji et al.

COMPOSITES PART B-ENGINEERING (2018)

Add to Collection

Review Thermodynamics

Review on thermal performances and applications of thermal energy storage systems with inorganic phase change materials

Yaxue Lin et al.

ENERGY (2018)

Add to Collection

Article Energy & Fuels

A novel process for preparing molten salt/expanded graphite composite phase change blocks with good uniformity and small volume expansion

Junwan Liu et al.

SOLAR ENERGY MATERIALS AND SOLAR CELLS (2017)

Add to Collection

Review Nanoscience & Nanotechnology

2D metal carbides and nitrides (MXenes) for energy storage

Babak Anasori et al.

NATURE REVIEWS MATERIALS (2017)

Add to Collection

Article Chemistry, Physical

Fabrication of polyaniline hydrogel: Synthesis, characterization and adsorption of methylene blue

Bo Yan et al.

APPLIED SURFACE SCIENCE (2015)

Add to Collection

Article Thermodynamics

Fabrication and characterization of stearic acid/polyaniline composite with electrical conductivity as phase change materials for thermal energy storage

Yi Wang et al.

ENERGY CONVERSION AND MANAGEMENT (2015)

Add to Collection

Review Green & Sustainable Science & Technology

A review of microencapsulation methods of phase change materials (PCMs) as a thermal energy storage (TES) medium

A. Jamekhorshid et al.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2014)

Add to Collection

Article Economics

The impact of growth, energy and financial development on the environment in China: A cointegration analysis

Abdul Jalil et al.

ENERGY ECONOMICS (2011)

Add to Collection

© Peeref 2019-2024. All rights reserved.