☆ 4.4 Article

Mathematical model of using CVD technology

SEPARATION SCIENCE AND TECHNOLOGY (2023)

Related references

Note: Only part of the references are listed.

Article Chemistry, Multidisciplinary

Methodology for applying control theory in modeling the processes of centrifugal enrichment of mineral raw materials

A. E. Burdonov et al.

Summary: This article presents an approach to applying automatic control theory in the mineral raw materials enrichment process. By representing the process of centrifugal concentration as a transfer function and finding its parameters, the article proposes a modeling method for centrifugal concentrators. The proposed mechanism for determining the transfer function parameters and their calculation based on experimental data was validated using MatLAB software and the Simulink package, resulting in satisfactory results.

SEPARATION SCIENCE AND TECHNOLOGY (2023)

Add to Collection

Article Metallurgy & Metallurgical Engineering

The Effects of Pulp Rheology on Gravity Gold Recovery in Free Milling Gold Ore of the Tarkwaian Systems of Ghana

Eric Aminartey Agorhom et al.

Summary: The study on gravity gold characterization is of significant economic importance for gold ores with a high amount of coarse gold particles. In this study, the effect of pulp rheology on gravity recoverable gold (GRG) was investigated, and the elemental and mineralogical composition of the gold ore was characterized. The results showed that the addition of clay material decreased gold recovery, while subsequent conditioning of the slurry with NaOH improved it. The addition of CaO, on the other hand, decreased gold recovery due to an increase in slurry viscosity.

MINERAL PROCESSING AND EXTRACTIVE METALLURGY REVIEW (2022)

Add to Collection

Review Chemistry, Multidisciplinary

Gravity separation by falcon concentrator- an over review

S. Farajzadeh et al.

Summary: Gravity separation, particularly using Falcon concentrators, has become increasingly important for processing fine mineral separation. This review analyzes the literature on the application and process mechanisms of Falcon separators, highlighting the factors that affect their metallurgical responses. Understanding these factors is crucial for optimizing industrial plant operation and laboratory-scale investigation.

SEPARATION SCIENCE AND TECHNOLOGY (2022)

Add to Collection

Article Engineering, Chemical

Modelling of continuous centrifugal gravity concentrators using a hybrid optimization approach based on gold metallurgical data

Givemore Sakuhuni et al.

Summary: This paper presents a new optimization method for Continuous Centrifugal Gravity Concentrators (CCGCs) based on gold metallurgical data. The method aims to achieve optimal grade and recovery objectives by using a non-dominated multi-objective optimization approach and artificial neural network simulation. The results demonstrate the robustness of the approach in predicting and optimizing CCGC performance.

MINERALS ENGINEERING (2022)

Add to Collection

Article Engineering, Chemical

Rotating flow characteristics in centrifugal high gradient magnetic separation and its effect on particle capture behavior

Fan Yi et al.

Summary: This study investigates the effects of rotating flow on the performance of a centrifugal high gradient magnetic separation (CHGMS) separator. The simulation results show that the rotation of the matrix generates a rotating flow in the separating area, which affects the collision probability of the matrix to particles. The experiments confirm that the increased matrix rotation speed has a more significant effect on the capture behavior than the feed velocity. These findings provide important insights for the development and application of CHGMS technology.

MINERALS ENGINEERING (2022)

Add to Collection

Article Green & Sustainable Science & Technology

Potential Uses of Artisanal Gold Mine Tailings, with an Emphasis on the Role of Centrifugal Separation Technique

Jeanne Pauline Munganyinka et al.

Summary: This study conducted mineralogical characterizations of artisanal gold mine tailings in Rwanda and found that they contain significant amounts of gold. The centrifugal separation technique was shown to be more efficient in gold recovery compared to the traditional panning approach.

SUSTAINABILITY (2022)

Add to Collection

Article Metallurgy & Metallurgical Engineering

Investigation of the effects of particle size on the performance of classical gravity concentration equipment

Damla Izerdem et al.

Summary: The use of gravity concentrators presents challenges such as determining liberation sizes, selecting appropriate particle sizes, and optimizing fine beneficiation. This study investigates the effects of liberated and non-liberated particles on different gravity concentration equipment, focusing on particle size and its impact on recoveries, separation efficiencies, and product grades. The test results show a certain trend in separation efficiency based on particle size, with increasing efficiency initially before decreasing. The study provides valuable data on particle concentration behavior and the relationship between particle size and separation efficiency, particularly in spiral concentrators.

MINERAL PROCESSING AND EXTRACTIVE METALLURGY REVIEW (2022)

Add to Collection

Article Energy & Fuels

Numerical Studies of Separation Performance of Knelson Concentrator for Beneficiation of Fine Coal

Licheng Ma et al.

Summary: The study investigated the separation of fine coal in a laboratory Knelson concentrator through experimental and numerical simulation, finding that the flow field favored particle layering and separation processes in the riffle part. Additionally, it was observed that centrifugal force and fluidizing water rates influenced the separation performance, with results from the simulation aligning with experimental findings. The CFE-DEM model was deemed effective and reliable for this study.

INTERNATIONAL JOURNAL OF COAL PREPARATION AND UTILIZATION (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Experimental investigation on the separation capabilities and limitation of Falcon semi-batch concentrator

Ranjeet Kumar Singh et al.

Summary: The experimental results suggest that the separation efficiency of the Falcon Semi-batch concentrator is higher for lower feed grades and poor below a concentration ratio of 3. By increasing the concentration ratio from 2.4 to 3, the separation efficiency of the Falcon concentrator was significantly enhanced from 15.3% to 66.1%.

SEPARATION SCIENCE AND TECHNOLOGY (2021)

Add to Collection

Article Mining & Mineral Processing

Model of baddeleyite recovery from dump products of an apatite-baddeleyite processing plant using a CVD6 concentrator

Vladislav V. Pelikh et al.

Summary: This paper focuses on developing a model for extracting baddeleyite from dump products of an apatite-baddeleyite processing plant using centrifugal concentrators, specifically exploring the optimization of technological parameters using Knelson CVD technology. The study utilizes statistical methods to build models of dependencies between concentrate and tailings yields and adjustable parameters, establishing relationships between concentrate yield and valve opening time, as well as between tailings yield and the G-force of the installation.

JOURNAL OF MINING INSTITUTE (2021)

Add to Collection

Article Engineering, Chemical

Effect of operational conditions on Falcon concentrator performance with different particle size fractions

Namik Atakan Aydogan et al.

PARTICULATE SCIENCE AND TECHNOLOGY (2020)

Add to Collection

Article Engineering, Chemical

Ring-by-ring analysis and models of retained mass of quartz in a laboratory Knelson Concentrator

Qiao Chen et al.

MINERALS ENGINEERING (2020)

Add to Collection

Article Engineering, Chemical

Performance evaluation of processing clay-containing ore in Knelson concentrator

Lahiru Basnayaka et al.

MINERALS ENGINEERING (2020)

Add to Collection

Review Engineering, Chemical

Research and application of a Knelson concentrator: A review

Qiao Chen et al.

MINERALS ENGINEERING (2020)

Add to Collection

Article Chemistry, Physical

Cassiterite recovery from a sulfide ore flotation tailing by combined gravity and flotation separations

Limin Zhang et al.

PHYSICOCHEMICAL PROBLEMS OF MINERAL PROCESSING (2020)

Add to Collection

Article Engineering, Chemical

Analysis of the operating mechanism of a Knelson concentrator

Qiao Chen et al.

MINERALS ENGINEERING (2020)

Add to Collection

Article Engineering, Geological

ESTABLISHMENT OF TECHNOLOGICAL DEPENDENCE OF KC-CVD6 CONCENTRATOR OPERATION BY MEANS OF THE ARGUMENT GROUP ACCOUNTING METHOD

Vladislav V. Pelikh et al.

BULLETIN OF THE TOMSK POLYTECHNIC UNIVERSITY-GEO ASSETS ENGINEERING (2020)

Add to Collection

Article Metallurgy & Metallurgical Engineering

Estimation of the Fluid Velocity Profile in the Stratification Zone of a Falcon Concentrator

Ranjeet Singh et al.

MINING METALLURGY & EXPLORATION (2020)

Add to Collection

Article Engineering, Chemical

A design of experiments investigation into the processing of fine low specific gravity minerals using a laboratory Knelson Concentrator

C. Marion et al.

MINERALS ENGINEERING (2019)

Add to Collection

Article Metallurgy & Metallurgical Engineering

Computational modelling of water flow inside laboratory Knelson concentrator bowl

M. R. Fatahi et al.

CANADIAN METALLURGICAL QUARTERLY (2019)

Add to Collection

Article Engineering, Chemical

An investigation on laboratory Knelson Concentrator separation performance: Part 3: Multi-component feed separation modelling

Ali Ghaffari et al.

MINERALS ENGINEERING (2018)

Add to Collection

Proceedings Paper Materials Science, Multidisciplinary

Optimization of Gold Ore Sumbawa Separation Using Gravity Method: Shaking Table

Achmad Dhaefi Ferdana et al.

PROCEEDINGS OF THE 3RD INTERNATIONAL CONFERENCE ON MATERIALS AND METALLURGICAL ENGINEERING AND TECHNOLOGY (ICOMMET 2017): ADVANCING INNOVATION IN MATERIALS SCIENCE, TECHNOLOGY AND APPLICATIONS FOR SUSTAINABLE FUTURE (2018)

Add to Collection

Article Engineering, Multidisciplinary

Centrifugal separation experimentation and optimum predictive model development for copper recovery from waste copper smelter dust

Daniel Okanigbe et al.

COGENT ENGINEERING (2018)

Add to Collection

Article Engineering, Chemical

An investigation on laboratory Knelson Concentrator separation performance: Part 2: Two-component feed separation modelling

Ali Ghaffari et al.

MINERALS ENGINEERING (2017)

Add to Collection

Article Engineering, Chemical

An investigation on laboratory Knelson Concentrator separation performance: Part 1: Retained mass modelling

Ali Ghaffari et al.

MINERALS ENGINEERING (2017)

Add to Collection

Article Engineering, Chemical

A mechanistic approach to modelling Knelson concentrators

T Coulter et al.

MINERALS ENGINEERING (2005)

Add to Collection

© Peeref 2019-2024. All rights reserved.