4.7 Article

Cigarette butt-assisted combustion synthesis of dolomite-derived sorbents with enhanced cyclic CO2 capturing capability for direct solar-driven calcium looping

Related references

Note: Only part of the references are listed.
Review Energy & Fuels

Functional Biochar Synergistic Solid/Liquid-Phase CO2 Capture: A Review

Yu Zhang et al.

Summary: This article reviews the existing post-combustion CO2 capture solutions, with a focus on liquid-phase and solid-phase CO2 capture technologies. The author proposes the concept of biochar-functionalized crosslinking synergistic ammonia CO2 capture technology, which has practical significance for the utilization of biomass waste and reduction of CO2 emissions.

ENERGY & FUELS (2022)

Article Energy & Fuels

Supercritical CO2 coupled with mechanical force to enhance carbonation of fly ash and heavy metal solidification

Qixin Yuan et al.

Summary: The study found that coupling supercritical CO2 with mechanical force can enhance the carbonation efficiency of fly ash and effectively immobilize heavy metals. Carbon sequestration and efficiency under supercritical CO2 conditions were significantly higher than under low-pressure conditions, while mechanical ball milling modification also improved the carbonation efficiency.
Article Energy & Fuels

Multi-doping strategy modified calcium-based materials for improving the performance of direct solar-driven calcium looping thermochemical energy storage

Yun Da et al.

Summary: This study investigates the improved optical absorption and cyclic stability of the direct solar-driven calcium-looping process for thermochemical energy storage using modified calcium-based materials. The results show that multi-doping strategy enhances the performance of calcium-looping thermochemical energy storage by synergistically improving optical absorption, carbonization kinetics, and cyclic stability.

SOLAR ENERGY MATERIALS AND SOLAR CELLS (2022)

Article Chemistry, Physical

Evaluation of Thermochemical Energy Storage Performance of Fe-/Mn-Doped, Zr-Stabilized, CaO-Based Composites under Different Thermal Energy Storage Modes

Jian Sun et al.

Summary: This study improves the cyclic thermal energy storage/release performance of CaCO3/CaO materials by conducting binary ion doping of Fe/Mn and Zr-based stabilizer incorporation. The synthetic CaO-based composites doped with binary ions of Fe/Mn show greatly increased spectral absorbance compared to pure CaO due to the generation of black Ca2Fe2O s and Ca4Mn3O10. The Zr-doped CaO-based composites exhibit superior cycling stability, especially under CSP-CO2 mode, due to the generation of inert CaZrO3 with desirable antisintering ability. The CaO-based composite with a molar ratio of Ca:Zr=100:6.7 exhibits a remarkably stable energy release density of 1.02 MJ/kg under CSP-CO2 mode, retaining 88.9% of its initial energy release density after 50 cycles.

ACS APPLIED ENERGY MATERIALS (2022)

Article Engineering, Environmental

Decomposition kinetics of Al- and Fe-doped calcium carbonate particles with improved solar absorbance and cycle stability

Chao Song et al.

Summary: This study successfully enhanced solar absorptance, cycle stability, and decreased decomposition temperature simultaneously by doping CaCO3 particles, paving the way for the design of high-performance calcium-based materials for next-generation high temperature thermal energy storage systems.

CHEMICAL ENGINEERING JOURNAL (2021)

Article Chemistry, Applied

Catalytic mechanism of Na on coal pyrolysis-derived carbon black formation: Experiment and DFT simulation

Dongdong Feng et al.

Summary: Coal-derived carbon black, the main component of PM2.5, is widely used in the rubber industry and energy storage. The study reveals that Na affects the formation mechanism of carbon black, influencing its molecular length, curvature, and spacing, as well as enhancing its electrochemical performance.

FUEL PROCESSING TECHNOLOGY (2021)

Article Chemistry, Multidisciplinary

CO2 capture activity of a novel CaO adsorbent stabilized with (ZrO2+Al2O3+CeO2)-based additive under mild and realistic calcium looping conditions

Mohammad Heidari et al.

Summary: The study focused on developing a novel synthetic adsorbent using the sol-gel autocombustion method, incorporating ZrO2, Al2O3, and CeO2 during the development of CaO adsorbent. The research found that the adsorbent with a molar ratio of 20/1 of calcium precursor to promoters showed the best performance, with the highest sorption capacity and CaO conversion rate. Additionally, the cyclic performance of modified adsorbents was found to be directly proportional to their morphological properties, with CN/20 demonstrating the best overall performance in capturing CO2.

JOURNAL OF CO2 UTILIZATION (2021)

Article Energy & Fuels

Structurally improved, TiO2-incorporated, CaO-based pellets for thermochemical energy storage in concentrated solar power plants

Shengbin Bai et al.

Summary: In this study, structurally improved, TiO2-incorporated, CaO-based pellets were successfully prepared by adding cellulose as a pore-forming template and adopting TiO2 incorporation method. These pellets exhibited high conversion rate and energy density in cyclic heat energy storage/release. The evenly distributed CaTiO3 grains provided structural stability and enhanced anti-sintering ability of the pellets, leading to improved cyclic energy storage/release performance.

SOLAR ENERGY MATERIALS AND SOLAR CELLS (2021)

Article Engineering, Environmental

Calcium-based composites for direct solar-thermal conversion and thermochemical energy storage

Yun Da et al.

CHEMICAL ENGINEERING JOURNAL (2020)

Article Chemistry, Physical

Modified Ca-Looping materials for directly capturing solar energy and high-temperature storage

Liang Teng et al.

ENERGY STORAGE MATERIALS (2020)

Article Engineering, Environmental

Preparation of a morph-genetic CaO-based sorbent using paper fibre as a biotemplate for enhanced CO2 capture

Xiaotong Ma et al.

CHEMICAL ENGINEERING JOURNAL (2019)

Article Engineering, Environmental

Introduction of chemically bonded zirconium oxide in CaO-based high-temperature CO2 sorbents for enhanced cyclic sorption

Hyung Jin Yoon et al.

CHEMICAL ENGINEERING JOURNAL (2019)

Article Chemistry, Physical

Synthesis of highly effective stabilized CaO sorbents via a sacrificial N-doped carbon nanosheet template

Ke Wang et al.

JOURNAL OF MATERIALS CHEMISTRY A (2019)

Article Engineering, Environmental

In-depth evaluation of a ZrO2 promoted CaO-based CO2 sorbent in fluidized bed reactor tests

Andy N. Antzara et al.

CHEMICAL ENGINEERING JOURNAL (2018)

Article Chemistry, Applied

Study on the interaction between CaO-based sorbents and coal ash in calcium looping process

Donglin He et al.

FUEL PROCESSING TECHNOLOGY (2017)

Article Energy & Fuels

Calcium looping sorbents for CO2 capture

Maria Erans et al.

APPLIED ENERGY (2016)

Article Engineering, Environmental

Investigation of novel naturally occurring manganocalcite for CO2 capture under oxy-fuel calcination

Yingchao Hu et al.

CHEMICAL ENGINEERING JOURNAL (2016)

Article Engineering, Environmental

A highly efficient CaO-based CO2 sorbent prepared by a citrate-assisted sol-gel technique

Hamid R. Radfarnia et al.

CHEMICAL ENGINEERING JOURNAL (2015)

Article Engineering, Environmental

Synthesis of Highly Efficient CaO-Based, Self-Stabilizing CO2 Sorbents via Structure-Reforming of Steel Slag

Sicong Tian et al.

ENVIRONMENTAL SCIENCE & TECHNOLOGY (2015)

Article Engineering, Environmental

Development of synthetic CaO sorbents via CTAB-assisted sol-gel method for CO2 capture at high temperature

Akarat Akgsornpeak et al.

CHEMICAL ENGINEERING JOURNAL (2014)

Article Energy & Fuels

Sol-gel-derived, CaO-based, ZrO2-stabilized CO2 sorbents

Marcin Broda et al.

Article Chemistry, Multidisciplinary

Synthesis of Highly Efficient, Ca-Based, Al2O3-Stabilized, Carbon Gel-Templated CO2 Sorbents

Marcin Broda et al.

ADVANCED MATERIALS (2012)

Article Chemistry, Physical

Sol-gel derived Li-Mg co-doped ZnO films: Preparation and characterization via XRD, XPS, FESEM

Seval Aksoy et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2012)

Review Thermodynamics

Comparative assessment of CO2 capture technologies for carbon-intensive industrial processes

Takeshi Kuramochi et al.

PROGRESS IN ENERGY AND COMBUSTION SCIENCE (2012)

Article Engineering, Environmental

Synthesis of Sintering-Resistant Sorbents for CO2 Capture

Wenqiang Liu et al.

ENVIRONMENTAL SCIENCE & TECHNOLOGY (2010)

Article Engineering, Chemical

Behavior of CaTiO3/Nano-CaO as a CO2 Reactive Adsorbent

S. F. Wu et al.

INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2010)

Review Thermodynamics

The calcium looping cycle for large-scale CO2 capture

J. Blamey et al.

PROGRESS IN ENERGY AND COMBUSTION SCIENCE (2010)

Article Chemistry, Applied

Cyclic calcination/carbonation looping of dolomite modified with acetic acid for CO2 capture

Ying-jie Li et al.

FUEL PROCESSING TECHNOLOGY (2008)

Article Materials Science, Multidisciplinary

Novel Approaches to Solution-Combustion Synthesis of Nanomaterials

A. S. Mukasyan et al.

INTERNATIONAL JOURNAL OF SELF-PROPAGATING HIGH-TEMPERATURE SYNTHESIS (2007)