☆ 4.7 Article

Sustainable removal of fluorine ions using ZrO2-MgO@C composite

SEPARATION AND PURIFICATION TECHNOLOGY (2023)

Related references

Note: Only part of the references are listed.

Article Engineering, Environmental

3D porous Ca-modified Mg-Zr mixed metal oxide for fluoride adsorption

Xinyuan Wang et al.

Summary: This study successfully utilized Ca-Modified Mg-Zr Mixed Metal Oxides (CCMZ) prepared by a green hydrothermal process and high-temperature calcination for fluoride adsorption. The 3D porous structure of CCMZ significantly enhanced fluoride migration and diffusion, showing good selectivity and reusability. The fluoride adsorption mechanism of CCMZ involved electrostatic attraction and ion exchange mechanism, providing a rational design and a simple preparation method for a new class of fluoride adsorbents.

CHEMICAL ENGINEERING JOURNAL (2022)

Add to Collection

Article Environmental Sciences

Facile preparation of UiO-66@PPy nanostructures for rapid and efficient adsorption of fluoride: Adsorption characteristics and mechanisms

Dongxue Liu et al.

Summary: The nanocomposite UiO-66@PPy was successfully synthesized and showed great fluoride removal performance with a maximum adsorption capacity of 290.7 mg/g. The introduction of conducting polymers opened new paths for the development of adsorbent materials.

CHEMOSPHERE (2022)

Add to Collection

Article Chemistry, Physical

Polyethyleneimine modified heterostructure porous polymer microspheres for efficient adsorption of acteoside

Helin Xu et al.

Summary: Acteoside (ACT) is a bioactive component with potential applications in various fields. The study proposed a novel strategy to synthesize polymer microspheres modified with polyethyleneimine (PEI) for efficient adsorption of ACT, showing increased adsorption capacity and selectivity through PEI introduction.

JOURNAL OF MOLECULAR LIQUIDS (2022)

Add to Collection

Article Chemistry, Physical

Nickel ions abatement from aqueous solutions and shipbuilding industry wastewater using ZIF-8-chicken beak hydroxyapatite

Rauf Foroutan et al.

Summary: A novel adsorbent HApB/ZIF-8 was successfully prepared by modifying the biocompatible material HApB from chicken beak with the compound ZIF-8, and it was utilized for the removal of Ni2+ from aqueous solutions. The HApB/ZIF-8 adsorbent exhibited high adsorption capacity and purification efficiency under specific conditions, indicating its potential application in shipbuilding industry wastewater treatment.

JOURNAL OF MOLECULAR LIQUIDS (2022)

Add to Collection

Review Chemistry, Physical

Nanoscale layered double hydroxide modified hybrid nanomaterials for wastewater treatment: A review

Ravindra Kumar Gautam et al.

Summary: This review examines the progress made in the development of nanoscale layered double hydroxide (LDH) based hybrid nanomaterials for the treatment of various environmental pollutants in wastewater. The synthesis of LDH nanomaterials and their modification by different materials are analyzed, as well as the characterization tools used. The applications of LDH based hybrid nanomaterials for the remediation of heavy metals, dyes, antibiotics, phosphates, pharmaceuticals, and other organic compounds in wastewater are discussed, along with the operating parameters and remediation mechanisms.

JOURNAL OF MOLECULAR LIQUIDS (2022)

Add to Collection

Article Chemistry, Inorganic & Nuclear

The simple synthesis of metal organic frameworks with high fluoride adsorption performance from water

Liwei Zhu et al.

Summary: Metal organic frameworks (MOFs) are proven to be a safe, effective, and environmentally friendly method for removing excess fluoride from water. The synthesis of zirconium-based MOFs and their successful application in real water samples showed significant adsorption performance over a wide range of pH. This approach has great potential for fluoride removal in water treatment.

JOURNAL OF SOLID STATE CHEMISTRY (2022)

Add to Collection

Review Chemistry, Applied

Versatility, Cost Analysis, and Scale-up in Fluoride and Arsenic Removal Using Metal-organic Framework-based Adsorbents

Linisha Biswal et al.

Summary: Metal-organic frameworks (MOFs) are a novel approach for fluoride and arsenic removal, with high surface area, versatile building blocks and numerous active sites. Despite the lower yield compared to conventional adsorbents, MOFs' high adsorption capacity, tailored chemical structure, and ionic uptake of fluoride and arsenic make them a more favorable option than many other adsorbents. The cost of different MOFs usually varies between 0.1 and 5 US$/g depending on the synthesis routes.

SEPARATION AND PURIFICATION REVIEWS (2022)

Add to Collection

Article Biotechnology & Applied Microbiology

Reuse of secondary aluminum ash: Study on removal of fluoride from industrial wastewater by mesoporous alumina modified with citric acid

Yuan Li et al.

Summary: Loading citric acid as a modifier onto the surface of mesoporous alumina synthesized from industrial solid waste secondary aluminum ash can produce highly efficient fluoride removing adsorbents. The modified adsorbent demonstrates stable adsorption properties under acidic conditions, reaching equilibrium quickly and maintaining good cycling performance. Ion exchange between -OH and fluoride is the main process of fluoride adsorption, and the introduction of citric acid increases the amount of -OH in the adsorbent. Coexisting anions, particularly PO43- and CO32-, have a significant influence on fluoride adsorption.

ENVIRONMENTAL TECHNOLOGY & INNOVATION (2022)

Add to Collection

Article

A critical review on graphene oxide nanostructured material: Properties, Synthesis, characterization and application in water and wastewater treatment

O.J. Ajala et al.

Environmental Nanotechnology, Monitoring and Management (2022)

Add to Collection

Article Engineering, Chemical

Micro/nanostructured MgO hollow spheres with selective adsorption performance and their application for fluoride monitoring in water

Renwu Zhu et al.

Summary: The search for suitable adsorbents for fluoride removal and accurate measurement are important issues in water research. This study prepared micro/nanostructured porous MgO hollow spheres and demonstrated their enhanced adsorption performance towards fluoride ions. The study also found that this MgO is suitable for measuring trace fluoride ions in water bodies using DGT.

SEPARATION AND PURIFICATION TECHNOLOGY (2022)

Add to Collection

Article Engineering, Environmental

Flocculation-to-adsorption transition of novel salt-responsive polyelectrolyte for recycling of highly polluted saline textile effluents

Kaixiang Wang et al.

Summary: A new salt-responsive starch flocculant was developed by starch etherification, which exhibited reversible switch from dissolution to precipitation in response to salt stimuli. The residual polymer in water solution and phase separation could be precisely modulated by changing salt concentration and counter ions. The salt-driven switchable solubility of polymer from water-soluble flocculants to solid-state adsorbents offers a possibility to overcome the limitations of industrial flocculation processes.

CHEMICAL ENGINEERING JOURNAL (2021)

Add to Collection

Article Environmental Sciences

Decoration of Citrus limon wood carbon with Fe3O4 to enhanced Cd2+ removal: A reclaimable and magnetic nanocomposite

Seyed Jamaleddin Peighambardoust et al.

Summary: The study found that the ACL/Fe3O4 magnetic composite effectively removed Cd2+ from aqueous solutions, with Fe3O4 nanoparticles improving the active surface area of ACL. The Langmuir and Freundlich isotherm models were used to describe the adsorption process using ACL and ACL/Fe3O4, with the latter showing a higher adsorption capacity.

CHEMOSPHERE (2021)

Add to Collection

Article Chemistry, Physical

Preparation of MgO porous nanoplates modified pumice and its adsorption performance on fluoride removal

Yong Zhang et al.

Summary: A novel low-cost adsorbent MgO@Pumice was developed for fluoride removal in water, showing enhanced performance with increasing growth cycles and exhibiting the best adsorption capacity at neutral pH. The adsorbent also demonstrated high fluoride removal ability across a wide pH range, making it a promising option for water treatment.

JOURNAL OF ALLOYS AND COMPOUNDS (2021)

Add to Collection

Article Chemistry, Physical

Evaluation and DFT analysis of 3D porous rhombohedral Fe-modified MgO for removing fluoride efficiently

Xinyuan Wang et al.

Summary: A three-dimensional porous Fe-modified MgO mixed metal oxide adsorbent, CMF, was successfully prepared using a one-step hydrothermal method, showing high adsorption capacity and good reusability for long-term fluoride absorption.

APPLIED SURFACE SCIENCE (2021)

Add to Collection

Article Polymer Science

A Mo-based metal-organic framework toward improving flame retardancy and smoke suppression of epoxy resin

Feng Zhang et al.

Summary: The Mo-based metal-organic framework (Mo-MOF) used as a flame retardant for epoxy resin (EP) showed excellent dispersion and compatibility, leading to improved flame retardancy and smoke suppression. Introduction of Mo-MOF reduced peak heat release rate, peak smoke production rate, and increased LOI and UL-94 rating for the composites. Detection and analysis of combustion products revealed possible flame retardant and smoke suppression mechanisms.

POLYMERS FOR ADVANCED TECHNOLOGIES (2021)

Add to Collection

Article Agricultural Engineering

A series of novel carbohydrate-based carbon adsorbents were synthesized by self-propagating combustion for tetracycline removal

Wei Wang et al.

Summary: Novel adsorbents Zn-Cs derived from glucose, maltose, and starch zinc oxide were synthesized through a self-propagating combustion synthesis method. The experimental results show that Zn-Cs exhibited excellent adsorption performance towards tetracycline, with a high adsorption capacity throughout a wide pH range and resistant to the presence of various ions and humic acid. The adsorption mechanism involved H-bonding, complexation, and conjugation effects.

BIORESOURCE TECHNOLOGY (2021)

Add to Collection

Article Chemistry, Physical

Room-temperature synthesis of MIL-100(Fe) and its adsorption performance for fluoride removal from water

Weifeng Li et al.

Summary: A novel strategy for room-temperature synthesis of MIL-100(Fe) using an organic amine as a deprotonating agent was proposed, and the resulting solid product, R-MIL-100(Fe), was characterized through various methods. The study found that R-MIL-100(Fe) had a high fluoride adsorption capacity, with the adsorption process belonging to surface adsorption and intraparticle diffusion. Additionally, R-MIL-100(Fe) exhibited excellent fluoride adsorption performance in a pH range of 4-10.

COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS (2021)

Add to Collection

Article Chemistry, Inorganic & Nuclear

Hydroxylation and fluorination on γ-Al2O3(110) surfaces: First-principles and transition state calculations

Jingkun Wang et al.

Summary: The study reveals different chemical adsorption forms and mechanisms of HF and H2O on γ-Al2O3 and hydroxylated surfaces under specific conditions, with coverage changes affecting the adsorption effect.

JOURNAL OF FLUORINE CHEMISTRY (2021)

Add to Collection

Article Engineering, Chemical

Water-stable zirconium and iron-based metal-organic frameworks (MOFs) as fluoride scavengers in aqueous medium

Mohammad Hossien Saghi et al.

Summary: Different water-stable classes of metal-organic frameworks were prepared hydrothermally and studied for fluoride capture, with MIL-53 (Fe) showing the highest removal rate. The mixing time was identified as the most significant operational variable for F- removal. Optimal operational conditions for maximizing F- capture were determined as pH 4, mixing time of 60 min, and MIL-53 (Fe) dosage of 0.25 g/L.

SEPARATION AND PURIFICATION TECHNOLOGY (2021)

Add to Collection

Article Engineering, Environmental

Carbon nanotubes/β-cyclodextrin/MnFe2O4 as a magnetic nanocomposite powder for tetracycline antibiotic decontamination from different aqueous environments

Rauf Foroutan et al.

Summary: In this study, magnetic composites (CNT/MnFe2O4 and CNT/beta-CD/MnFe2O4) were successfully synthesized using carbon nanotubes (CNT) and beta-cyclodextrin (CD) for the removal of tetracycline (TC) antibiotics from water. The synthesized magnetic composites exhibited higher specific active surface area and showed effective removal of TC from various aqueous solutions, following different adsorption isotherm models. The research indicates promising potential of CNT-based magnetic composites as adsorbents for TC removal processes in water treatment.

JOURNAL OF ENVIRONMENTAL CHEMICAL ENGINEERING (2021)

Add to Collection

Article Engineering, Environmental

Design and synthesis of amine functionalized graphene oxide for enhanced fluoride removal

Antonysamy Jeyaseelan et al.

Summary: The study developed amine functionalized graphene oxide (AGO) with high defluoridation capacity for fluoride removal. Through optimization of parameters and investigation of adsorption isotherms, kinetics and thermodynamics, the fluoride removal mechanism of AGO was found to be electrostatic attraction.

JOURNAL OF ENVIRONMENTAL CHEMICAL ENGINEERING (2021)

Add to Collection

Article Chemistry, Physical

Highly efficient adsorption and recycle of phosphate from wastewater using flower-like layered double oxides and their potential as synergistic flame retardants

Xingzhi Zhang et al.

JOURNAL OF COLLOID AND INTERFACE SCIENCE (2020)

Add to Collection

Article Engineering, Environmental

Efficient removal of fluoride from aqueous solutions using 3D flower-like hierarchical zinc-magnesium-aluminum ternary oxide microspheres

Ming Gao et al.

CHEMICAL ENGINEERING JOURNAL (2020)

Add to Collection

Article Environmental Sciences

Adsorption of tetracycline in aqueous solution by biochar derived from waste Auricularia auricula dregs

Yingjie Dai et al.

CHEMOSPHERE (2020)

Add to Collection

Review Engineering, Environmental

Selective Phosphate Removal from Water and Wastewater using Sorption: Process Fundamentals and Removal Mechanisms

Baile Wu et al.

ENVIRONMENTAL SCIENCE & TECHNOLOGY (2020)

Add to Collection

Article Chemistry, Physical

Density Functional Theory and Molecular Dynamics insights into the site-dependent adsorption of hydrogen fluoride on kaolinite

Bibek Dash et al.

JOURNAL OF MOLECULAR LIQUIDS (2020)

Add to Collection

Review Biochemistry & Molecular Biology

Preparation, characterization, physicochemical property and potential application of porous starch: A review

Jiahui Chen et al.

INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES (2020)

Add to Collection

Article Environmental Sciences

Recovery of fluoride from water through adsorption using orange-waste gel, followed by desorption using saturated lime water

Hari Paudyal et al.

JOURNAL OF MATERIAL CYCLES AND WASTE MANAGEMENT (2020)

Add to Collection

Article Chemistry, Physical

Boosting CO2 hydrogenation via size-dependent metal-support interactions in cobalt/ceria-based catalysts

Alexander Parastaev et al.

NATURE CATALYSIS (2020)

Add to Collection

Article Engineering, Environmental

Adsorption mechanism for removing different species of fluoride by designing of core-shell boehmite

Lei Huang et al.

JOURNAL OF HAZARDOUS MATERIALS (2020)

Add to Collection

Article Agricultural Engineering

Effects of modification and magnetization of rice straw derived biochar on adsorption of tetracycline from water

Jiawei Dai et al.

BIORESOURCE TECHNOLOGY (2020)

Add to Collection

Article Environmental Sciences

Hierarchical hollow manganese-magnesium-aluminum ternary metal oxide for fluoride elimination

Ming Gao et al.

ENVIRONMENTAL RESEARCH (2020)

Add to Collection

Article Chemistry, Physical

Theoretical study of oxygen adsorption energy on supported metal cluster using d-band center theory and HSAB concept

Kazuya Miura et al.

SURFACE SCIENCE (2020)

Add to Collection

Review Engineering, Environmental

Review of fluoride removal from water environment by adsorption

Junyong He et al.

JOURNAL OF ENVIRONMENTAL CHEMICAL ENGINEERING (2020)

Add to Collection

Article Chemistry, Physical

Constructing hydrangea-like hierarchical zinc-zirconium oxide microspheres for accelerating fluoride elimination

Ming Gao et al.

JOURNAL OF MOLECULAR LIQUIDS (2020)

Add to Collection

Article Environmental Sciences

Carbon-based materials as adsorbent for antibiotics removal: Mechanisms and influencing factors

Yujia Xiang et al.

JOURNAL OF ENVIRONMENTAL MANAGEMENT (2019)

Add to Collection

Article Acoustics

Ultrasound assisted synthesis of Mg-Mn-Zr impregnated activated carbon for effective fluoride adsorption from water

Aditi Mullick et al.

ULTRASONICS SONOCHEMISTRY (2019)

Add to Collection

Article Engineering, Environmental

Surfactant-modified serpentine for fluoride and Cr(VI) adsorption in single and binary systems: Experimental studies and theoretical modeling

Mohamed Mobarak et al.

CHEMICAL ENGINEERING JOURNAL (2019)

Add to Collection

Article Energy & Fuels

Zr-Induced Thermostable Polymeric Nanospheres with Double-Cross-Linked Architectures for Oil Recovery

Zhiyong Wang et al.

ENERGY & FUELS (2019)

Add to Collection

Article Engineering, Environmental

A new adsorption model based on generalized van der Waals partition function for the description of all types of adsorption isotherms

Lingli Kong et al.

CHEMICAL ENGINEERING JOURNAL (2019)

Add to Collection

Article Environmental Sciences

The adsorption characteristics of fluoride on commercial activated carbon treated with quaternary ammonium salts (Quats)

Ching-Lung Chen et al.

SCIENCE OF THE TOTAL ENVIRONMENT (2019)

Add to Collection

Article Environmental Sciences

Coating magnetic biochar with humic acid for high efficient removal of fluoroquinolone antibiotics in water

Jing Zhao et al.

SCIENCE OF THE TOTAL ENVIRONMENT (2019)

Add to Collection

Article Chemistry, Applied

Design of amphoteric chitosan flocculants for phosphate and turbidity removal in wastewater

Henry K. Agbovi et al.

CARBOHYDRATE POLYMERS (2018)

Add to Collection

Article Chemistry, Physical

Simultaneous and efficient removal of fluoride and phosphate by Fe-La composite: Adsorption kinetics and mechanism

Jia Wang et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2018)

Add to Collection

Article Engineering, Chemical

The adsorption mechanism of calcium ion on quartz (101) surface: A DFT study

Xinyang Wang et al.

POWDER TECHNOLOGY (2018)

Add to Collection

Article Multidisciplinary Sciences

A cocoon silk chemistry strategy to ultrathin N-doped carbon nanosheet with metal single-site catalysts

Youqi Zhu et al.

NATURE COMMUNICATIONS (2018)

Add to Collection

Article Chemistry, Multidisciplinary

Carbide-Supported Au Catalysts for Water-Gas Shift Reactions: A New Territory for the Strong Metal-Support Interaction Effect

Jinhu Dong et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2018)

Add to Collection

Article Green & Sustainable Science & Technology

Equilibrium, kinetic, and thermodynamic studies of lead ion and zinc ion adsorption from aqueous solution onto activated carbon prepared from palm oil mill effluent

Ganiyu Abimbola Adebisi et al.

JOURNAL OF CLEANER PRODUCTION (2017)

Add to Collection

Article Engineering, Environmental

Silane-modified halloysite/Fe3O4 nanocomposites: Simultaneous removal of Cr(VI) and Sb(V) and positive effects of Cr(VI) on Sb(V) adsorption

Kecheng Zhu et al.

CHEMICAL ENGINEERING JOURNAL (2017)

Add to Collection

Article Chemistry, Physical

Removal of Norfloxacin from aqueous solution by clay-biochar composite prepared from potato stem and natural attapulgite

Yan Li et al.

COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS (2017)

Add to Collection

Article Engineering, Environmental

Adsorption of fluoride by Fe-Mg-La triple-metal composite: Adsorbent preparation, illustration of performance and study of mechanisms

Yang Yu et al.

CHEMICAL ENGINEERING JOURNAL (2015)

Add to Collection

Review Chemistry, Physical

Molecular-based design and emerging applications of nanoporous carbon spheres

Jian Liu et al.

NATURE MATERIALS (2015)

Add to Collection

Article Chemistry, Multidisciplinary

Physisorption of gases, with special reference to the evaluation of surface area and pore size distribution (IUPAC Technical Report)

Matthias Thommes et al.

PURE AND APPLIED CHEMISTRY (2015)

Add to Collection

Review Engineering, Environmental

Aqueous mercury adsorption by activated carbons

Pejman Hadi et al.

WATER RESEARCH (2015)

Add to Collection

Article Engineering, Environmental

Synthesis and characterization of cotton-like Ca-Al-La composite as an adsorbent for fluoride removal

Wei Xiang et al.

CHEMICAL ENGINEERING JOURNAL (2014)

Add to Collection

Article Environmental Sciences

Drinking water standards in South American countries: convergences and divergences

Vivian Gemiliano Pinto et al.

JOURNAL OF WATER AND HEALTH (2012)

Add to Collection

Article Biochemistry & Molecular Biology

Hydrothermal synthesis, characterization, and KOH activation of carbon spheres from glucose

Min Li et al.

CARBOHYDRATE RESEARCH (2011)

Add to Collection

Article Chemistry, Physical

Effects of La2O3 on the Mixed Higher Alcohols Synthesis from Syngas over Co Catalysts: A Combined Theoretical and Experimental Study

Vanessa M. Lebarbier et al.

JOURNAL OF PHYSICAL CHEMISTRY C (2011)

Add to Collection

Article Chemistry, Inorganic & Nuclear

FT-IR and Raman spectroscopic studies on B2O3-PbO-Ag2O glasses dopped with manganese ions

Raluca Ciceo Lucacel et al.

SOLID STATE SCIENCES (2007)

Add to Collection

Article Chemistry, Physical

Equilibrium, kinetics, mechanism, and process design for the sorption of methylene blue onto rice husk

V Vadivelan et al.

JOURNAL OF COLLOID AND INTERFACE SCIENCE (2005)

Add to Collection

Article Chemistry, Physical

Structure and surface chemistry of manganese-doped copper-based mixed metal oxides derived from layered double hydroxides

F Li et al.

COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS (2004)

Add to Collection

Article Chemistry, Physical

On the accuracy of DFT for describing hydrogen bonds: Dependence on the bond directionality

J Ireta et al.

JOURNAL OF PHYSICAL CHEMISTRY A (2004)

Add to Collection

Review Chemistry, Applied

Physisorption hysteresis loops and the characterization of nanoporous materials

KSW Sing et al.

ADSORPTION SCIENCE & TECHNOLOGY (2004)

Add to Collection

© Peeref 2019-2024. All rights reserved.