☆ 4.7 Article

Unraveling the steric hindrance roles of the phenolic hydroxyl position on the selective Ge(IV) recovery from zinc residue leachate

SEPARATION AND PURIFICATION TECHNOLOGY (2023)

Related references

Note: Only part of the references are listed.

Article Biochemistry & Molecular Biology

Design of AgNPs doped chitosan/sodium lignin sulfonate/polypyrrole films with antibacterial and endotoxin adsorption functions

Tingting Xu et al.

Summary: In this study, a one-step electrodeposition method was used to prepare chitosan/Ag/polypyrrole films, and layer-by-layer self-assembly was used to introduce lignin sulphonate (LS) to obtain chitosan/Ag/polypyrrole/LS films. The antibacterial effects against E. coli and S. aureus were demonstrated, and the addition of self-assembled LS further improved the efficacy. The films also showed rapid and efficient endotoxin adsorption, with the electrostatic interactions between chitosan and endotoxin molecules playing a major role.

INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES (2023)

Add to Collection

Article Engineering, Chemical

Ionic liquid-modified chitosan fibers for Au(I) recovery from waste printed circuit boards bioleachate: Preparation, adsorption mechanism, and application

Xiaoyu Lin et al.

Summary: The purpose of this study is to develop an eco-friendly adsorbent based on ionic liquid (IL) to selectively recover Au (I) from bioleachate and to understand its adsorption mechanism. IL-modified chitosan fibers (ILCFs) were prepared as a fast and highly efficient adsorbent for Au(I) recovery under alkaline conditions. The ILCFs exhibited a uniform cross-sectional diameter of 31.2 +/- 1.1 μm. Characterization using SEM, FT-IR, and XPS revealed the adsorption mechanism of Au(I) on ILCFs. The maximum Au(I) adsorption capacity of the ILCFs was found to be 357.0 +/- 13.2 mg/g based on the Langmuir model. An adsorption equilibrium was reached within 7 minutes, with rate constants of pseudo-1st-order and pseudo-2nd-order being 0.8912 +/- 0.0569 1/min and 0.0049 +/- 0.0002 g/mg min, respectively. Furthermore, the ILCFs exhibited high selectivity for Au(I) in waste printed circuit board bioleachate. The developed ILCFs are effective in selectively adsorbing Au(I) and have potential in recovering it from urban mining bioleachates.

SEPARATION AND PURIFICATION TECHNOLOGY (2023)

Add to Collection

Article Engineering, Environmental

Fluorescent carbon dots crosslinked cellulose Nanofibril/Chitosan interpenetrating hydrogel system for sensitive detection and efficient adsorption of Cu (II) and Cr (VI)

Xueqi Chen et al.

Summary: A novel hydrogel material, NCDs-CNF/CSgel, was developed for the simultaneous detection and adsorption of Cu(II) and Cr(VI) in water, showing superior fluorescence response for Cr(VI) and high adsorption capacities for both heavy metal ions.

CHEMICAL ENGINEERING JOURNAL (2022)

Add to Collection

Article Engineering, Environmental

Non-toxic chitosan-based hydrogel with strong adsorption and sensitive detection abilities for tetracycline

Qiuyan Luo et al.

Summary: In this study, a non-toxic chitosan-based hydrogel was developed with strong sorption and sensitive detection abilities for tetracycline. Cellulose nanocrystals improved the adsorption ability, while carbon dots served as fluorescent probes for detecting tetracycline with high selectivity and sensitivity.

CHEMICAL ENGINEERING JOURNAL (2022)

Add to Collection

Article Engineering, Chemical

Diameter dependent thermodynamics of adsorption on nanowires: A theoretical and experimental study

Zixiang Cui et al.

Summary: This study investigated the adsorption thermodynamic properties of CeO2 nanowires with different diameters on various dyes. The results showed that as the diameter decreases, the adsorption capacity and equilibrium constant increase, while the thermodynamic properties decrease and are linearly related to the reciprocal of diameter. The experimental results are in agreement with the thermodynamic theory of nanowire adsorption.

CHEMICAL ENGINEERING SCIENCE (2022)

Add to Collection

Article Engineering, Environmental

Enhanced selective adsorption of lead(II) from complex wastewater by DTPA functionalized chitosan-coated magnetic silica nanoparticles based on anion-synergism

Yaoyao Huang et al.

Summary: A novel magnetic adsorbent, DTPA-modified chitosan-coated magnetic silica nanoparticle (FFO@Sil@Chi-DTPA), was successfully prepared to enhance Pb(II) selective adsorption from multi-metal wastewater based on anion-synergism. The presence of MB in the system was found to enhance the adsorption effect of Pb(II) while also increasing MB adsorption, indicating a synergistic effect between Pb(II) and MB.

JOURNAL OF HAZARDOUS MATERIALS (2022)

Add to Collection

Article Engineering, Environmental

Adsorption-desorption behavior of heavy metals in aquatic environments: Influence of sediment, water and metal ionic properties

Lorena S. Miranda et al.

Summary: Limited knowledge of the combined effects of water and sediment properties and metal ionic characteristics on the solid-liquid partitioning of heavy metals constrains the effective management of urban waterways. The study revealed that high salinity can increase the solubility of weakly-bound metals, while dissolved organic matter does not favor metal solubility.

JOURNAL OF HAZARDOUS MATERIALS (2022)

Add to Collection

Article Engineering, Environmental

Fabrication and investigation of novel monochloroacetic acid fortified, tripolyphosphate-crosslinked chitosan for highly efficient adsorption of uranyl ions from radioactive effluents

Meng Xia et al.

Summary: Chitosan crosslinked with potassium tripolyphosphate (CTPP) and monochlomacetic-acid-modified chitosan crosslinked with potassium tripolyphosphate (MCTPP) were synthesized for efficient removal of UO22+ from acidic radioactive effluents. The adsorption process was influenced by factors such as pH and adsorbent dose, and the adsorption mechanism was found to be an endothermic single-layer process. The synthesized composites showed high adsorption capacities for UO22+ and were minimally affected by common metal ions.

JOURNAL OF HAZARDOUS MATERIALS (2022)

Add to Collection

Article Engineering, Environmental

Mechanistic insight into selective adsorption and easy regeneration of carboxyl-functionalized MOFs towards heavy metals

Chenghan Ji et al.

Summary: MIL-121, a carboxyl adsorbent, demonstrates high adsorption selectivity for heavy metals and easy regeneration, showing potential for efficient and effective treatment of heavy metal wastewater.

JOURNAL OF HAZARDOUS MATERIALS (2022)

Add to Collection

Article Engineering, Chemical

A strategy of synergistically using ether oxygen and phenolic hydroxyl groups for Ultra-High selective and fast Cs+ isolation

Zihao Xu et al.

Summary: Hypercrosslinked polymers (HCPs) with synergistic effect of ether oxygen and phenolic hydroxyl groups were designed and fabricated for Cs+ isolation in the salt lake system. The content of the ether oxygen group in the frameworks was regulated to significantly increase the separation factors (S.F.)(Cs+/K+) of the adsorbents. PO-HCPs-6 showed nearly 5 times higher separation factor than other Cs+ adsorbents, with an ultra-high value of 57. The mild polymerization process resulted in an extremely fast kinetic adsorption rate, where PO-HCPs-6 reached 90% of the equilibrium adsorption capacity in just 1 minute. After 5 times adsorption-desorption experiments, PO-HCPs-6 demonstrated remarkable elution rate (> 92%) and reusability adsorption capacity (> 91%), indicating its inspiring application potential for Cs+ isolation in the salt lake brine system.

SEPARATION AND PURIFICATION TECHNOLOGY (2022)

Add to Collection

Article Engineering, Environmental

Microporous carbon derived from hydroxyl functionalized organic network for efficient adsorption of flumequine: Adsorption mechanism and application potentials

Zhe Zhao et al.

Summary: A microporous carbon derived from a hydroxyl functionalized organic network was prepared and investigated for its adsorption of FLU, showing high adsorption capacity, regeneration capability, and wide application potentials. The study provides insights into the development of new synthesis strategies and the extensive application of pollutant removals by this carbon material in environmental science.

CHEMICAL ENGINEERING JOURNAL (2022)

Add to Collection

Article Engineering, Environmental

Efficient removal of Cu(II) from an aqueous solution using a novel chitosan assisted EDTA-intercalated hydrotalcite-like compound composite: Preparation, characterization, and adsorption mechanism

Yan Li et al.

Summary: Adsorption is a promising method for removing heavy metals from contaminated water. In this study, a highly efficient composite absorbent was synthesized using chitosan and ethylenediaminetetraacetate-intercalated Mg-Al hydrotalcite-like compound. The adsorbent had a high specific surface area and various functional groups, allowing for strong complexation with Cu(II). The adsorption capacity was investigated under different conditions, and it was found that the equilibrium was reached within 120 min. The adsorption kinetics and isotherms were well described by mathematical models. The results suggest that this absorbent has potential applications in treating Cu(II) contaminated wastewater.

CHEMICAL ENGINEERING JOURNAL (2022)

Add to Collection

Article Environmental Sciences

Adsorption behavior of Cu(II) and Cr(VI) on aged microplastics in antibiotics-heavy metals coexisting system

Ziqing Zhou et al.

Summary: Antibiotics have complex impacts on the adsorption behavior of heavy metals on aged microplastics, showing opposite effects on Cu(II) and Cr(VI) adsorption. The presence of antibiotics seemed to have no significant effect on the type of adsorption isotherm and kinetic model in most Cu(II) adsorption systems.

CHEMOSPHERE (2022)

Add to Collection

Article Engineering, Environmental

Sulfur-modified chitosan derived N,S-co-doped carbon as a bifunctional material for adsorption and catalytic degradation sulfamethoxazole by persulfate

Kangfeng Pang et al.

Summary: N,S-co-doped carbons synthesized as persulfate activators for SMX remediation showed excellent removal and mineralization efficiency. The synergy of N and S contributed to enhanced removal efficiency, with adsorption and oxidation performance highly dependent on S/N atomic ratio.

JOURNAL OF HAZARDOUS MATERIALS (2022)

Add to Collection

Article Chemistry, Physical

Zeta potential in dispersions of titania nanoparticles in moderately polar solvents stabilized with anionic surfactants

Marek Kosmulski et al.

Summary: The electrophoretic mobility of titania nanoparticles was measured in ethane-1,2-diol and propane-1,2-diol with the presence of SDS and sodium octadecylsulfate. Acidification and alkalization of the dispersions resulted in positive and negative zeta potential, respectively. Anionic surfactants had a moderate effect on the zeta potential, with sodium octadecylsulfate being more efficient in shifting the zeta potential to more negative values.

JOURNAL OF MOLECULAR LIQUIDS (2022)

Add to Collection

Review Engineering, Chemical

Review on metal extraction technologies suitable for critical metal recovery from mining and processing wastes

Anne J. Whitworth et al.

Summary: The increasing demand for critical metals in the transition to low-carbon economies and advancements in high-tech has led to a global drive to find and develop these resources. Mining and processing wastes can provide significant concentrations of critical metals, but the extraction process requires suitable technologies.

MINERALS ENGINEERING (2022)

Add to Collection

Article Engineering, Chemical

Degradation of diclofenac sodium with low concentration from aqueous milieu through polydopamine-chitosan modified magnetic adsorbent-assisted photo-Fenton process

Manli Sun et al.

Summary: In this study, a magnetic polydopamine-chitosan modified adsorbent was successfully prepared and demonstrated favorable adsorption performance towards low-concentration diclofenac sodium. The adsorption mechanism was investigated by regulating solution conditions, and the degradation of adsorbed diclofenac sodium was achieved using a photo-Fenton system.

SEPARATION AND PURIFICATION TECHNOLOGY (2022)

Add to Collection

Article Food Science & Technology

Characterization of different phenolic acids grafted chitosan and their application for Japanese sea bass (Lateolabraxjaponicus) fillets preservation

Xin Yang et al.

Summary: This study characterized chitosan graft different phenolic acids (CS-g-phenolic acids) and investigated their preservation effect on sea bass. The results showed that grafting with phenolic acids effectively enhanced the antioxidant and antibacterial capacity of chitosan. Furthermore, CS-g-phenolic acids exhibited significant antibacterial and antioxidant effects, and maintained the quality of sea bass during storage.

LWT-FOOD SCIENCE AND TECHNOLOGY (2022)

Add to Collection

Article Engineering, Environmental

Desirable bonding interactions between organo-functional triazinedithiol groups and heavy metal ions for significantly improved adsorption or dispersion property

Yabin Wang et al.

Summary: This study compares the performance of three different functional silanes on mesoporous silica nanospheres and demonstrates the superiority of triazinedithiolsilane in cadmium capture and metal dispersion.

CHEMICAL ENGINEERING JOURNAL (2022)

Add to Collection

Article Environmental Sciences

2,6-Dichloro-1,4-benzoquinone formation from chlorination of substituted aromatic antioxidants and its control by pre-ozonation in drinking water treatment plant

Rongrong Qiao et al.

Summary: Halobenzoquinones, including 2,6-dichloro-1,4-benzoquinone (2,6-DCBQ), are common disinfection by-products in drinking water. This study investigated the formation of 2,6-DCBQ from chlorination of three aromatic antioxidants and found that only one of them produced 2,6-DCBQ. Experimental results showed that pre-ozonation, granular activated carbon, and quartz sand treatments could effectively reduce the formation of 2,6-DCBQ during water treatment.

CHEMOSPHERE (2022)

Add to Collection

Article Engineering, Chemical

A comprehensive investigation of external mass transfer and intraparticle diffusion for batch and continuous adsorption of heavy metals using pore volume and surface diffusion model

Mohd Danish et al.

Summary: Separation of heavy metals from water bodies is crucial for the protection of human, marine life, and the environment. The adsorptive separation of heavy metals using cheap and environmentally friendly biosorbents shows promise. This study applies the pore volume and surface diffusion (PVSD) model to investigate the mass transfer processes involved in the adsorption of Cu (II), Cd (II), and Pb(II) using different biosorbents. The PVSD model is able to accurately predict concentration decay and breakthrough curves for batch and continuous modes.

SEPARATION AND PURIFICATION TECHNOLOGY (2022)

Add to Collection

Article Engineering, Chemical

Highly selective adsorption and efficient recovery of cationic micropollutants from aqueous solution via ultrathin indium vanadate nanoribbons

Han Feng et al.

Summary: In this study, two-dimensional ultrathin InVO4 nanoribbons with high adsorption capacity and ease of regeneration were synthesized. The material exhibited impressive selective adsorption capabilities towards cationic dyes, with strong electrostatic attraction identified as the predominant adsorption mechanism. Additionally, the adsorbents showed remarkable resilience to pH variation and could be rapidly and efficiently regenerated.

SEPARATION AND PURIFICATION TECHNOLOGY (2022)

Add to Collection

Review Engineering, Environmental

Recent advances in the recovery of germanium during the zinc refining process

Xilin Geng et al.

Summary: Germanium, with its excellent electrical and optical properties, plays a crucial role in various high-tech fields. However, the recovery efficiency of germanium is low, accompanied by high energy consumption and impurities. Therefore, there is an urgent need for efficient and low-consumption green processes to utilize germanium in zinc concentrate. This paper provides a systematic overview of the basic properties, key technologies, and recent advances in leaching and separation of germanium, focusing on the study of germanium species and coordination reactions.

CHEMICAL ENGINEERING JOURNAL (2022)

Add to Collection

Article Environmental Sciences

Selective removal and recovery of gallium and germanium from synthetic zinc refinery residues using biosorption and bioprecipitation

Sudeshna Saikia et al.

Summary: This study compared the effectiveness of adsorption and precipitation for the removal and recovery of gallium, germanium and zinc, with biosorption and bioprecipitation showing high removal and recovery efficiencies for gallium and zinc.

JOURNAL OF ENVIRONMENTAL MANAGEMENT (2022)

Add to Collection

Review Engineering, Environmental

Recent advances in membrane filtration for heavy metal removal from wastewater: A mini review

Hongrui Xiang et al.

Summary: This review introduces the advantages of membrane separation method for heavy metal removal and summarizes the latest developments and applications of ultrafiltration, nanofiltration, reverse osmosis, and electrodialysis. The results indicate that membrane filtration methods have great potential for heavy metal removal.

JOURNAL OF WATER PROCESS ENGINEERING (2022)

Add to Collection

Article Engineering, Environmental

Synthesis of novel diol modified chitosan and their enhanced selective adsorption behavior for germanium(IV)

Xinlun Song et al.

Summary: An efficient adsorbent (HEMA-IDOI-CS) was prepared for recovering Ge(IV) by grafting HEMA and 3-chloro-1,2-propanediol onto chitosan, showing excellent adsorption performance at pH 3-8, high selectivity, and good reusability. The steric effect of the o-hydroxyl groups greatly enhanced the efficiency of the CS-based materials for selectively chelating with tetrahedral Ge(IV).

JOURNAL OF ENVIRONMENTAL CHEMICAL ENGINEERING (2022)

Add to Collection

Article Engineering, Chemical

Extraction behavior of germanium from synthetic leaching solution of secondary zinc oxide in tertiary amine (N235)-trioctyl phosphate (TOP) system

Tao Zhang et al.

Summary: In this study, the tertiary amine-trioctyl phosphate-sulfonated kerosene system was employed to extract Ge(IV) from synthetic leachate of secondary zinc oxide. The effects of different complexing agents and impurities on the extraction were investigated, with tartaric acid showing the highest extraction efficiency for Ge(IV). Stoichiometry analysis revealed the specific type of extracted complex.

MINERALS ENGINEERING (2021)

Add to Collection

Review Engineering, Environmental

Application of co-pyrolysis biochar for the adsorption and immobilization of heavy metals in contaminated environmental substrates

Yuanling Li et al.

Summary: This article summarizes recent advances in the development and application of co-pyrolysis biochar for the adsorption and immobilization of various heavy metals in contaminated environmental substrates. It includes the production, characteristics, and advantages of co-pyrolysis biochar, as well as the adsorption behaviors and mechanisms of different heavy metals in flue gas and wastewater. Additionally, the immobilization of heavy metals in both biochar itself and contaminated soils by co-pyrolysis biochar is discussed.

JOURNAL OF HAZARDOUS MATERIALS (2021)

Add to Collection

Article Engineering, Chemical

Facile preparation of iron oxyhydroxide-biopolymer (Chitosan/Alginate) beads and their comparative insights into arsenic removal

Shweta Rawat et al.

Summary: The study presents a modified method for synthesizing bionanocomposite beads to achieve optimal dispersion of nanoparticles throughout the biopolymer. Batch trials were conducted to assess the effect of dose, pH, contact time, and ionic strength on arsenic adsorption. The role of hydroxyl and amino groups in the adsorption process was revealed through FTIR and XPS analyses.

SEPARATION AND PURIFICATION TECHNOLOGY (2021)

Add to Collection

Article Biochemistry & Molecular Biology

Preparation of low molecular chitosan by microwave-induced plasma desorption/ionization technology

Yuting Li et al.

Summary: This study demonstrated the use of MIPDI for the first time to prepare low molecular weight chitosan, showing that the method is fast, efficient, and improves the antimicrobial properties of chitosan.

INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES (2021)

Add to Collection

Article Engineering, Environmental

Tannin foam immobilized with ferric ions for efficient removal of ciprofloxacin at low concentrations

Baicun Hao et al.

Summary: The study utilized natural bayberry tannin foam (TF-Fe) for the removal of CIP in water, with Fe3+ fixation showing excellent adsorption performance, suitable for water treatment under different pH conditions, and capable of multiple recycling.

JOURNAL OF HAZARDOUS MATERIALS (2021)

Add to Collection

Article Engineering, Environmental

The adsorption mechanism of heavy metals from coal combustion by modified kaolin: Experimental and theoretical studies

Zhaoping Zhong et al.

Summary: The study shows that modified kaolin after intercalation-exfoliation and acid/alkali modification significantly enhances the retention effect of heavy metals (Pb, Cd, Zn, and Cr), mainly due to more active adsorption sites, richer porosity, and more effective delay in coal ash coking. Acid/alkali modification effectively promotes stable chemical adsorption by inducing electron transfer between modified kaolin and heavy metals.

JOURNAL OF HAZARDOUS MATERIALS (2021)

Add to Collection

Article Engineering, Environmental

Fabrication of a CO2-responsive chitosan aerogel as an effective adsorbent for the adsorption and desorption of heavy metal ions

Songlin Fan et al.

Summary: A novel CO2-responsive chitosan aerogel was synthesized for the adsorption of Cu2+. Compared to traditional methods, this aerogel showed significantly increased adsorption capacity and mechanical properties. It could efficiently desorb Cu2+ through CO2 bubbling, making it an environmentally friendly option for metal ion adsorption and recovery.

JOURNAL OF HAZARDOUS MATERIALS (2021)

Add to Collection

Article Biochemistry & Molecular Biology

Therapeutic potential of plant-derived tannins in non-malignant respiratory diseases

Subbiah Rajasekaran et al.

Summary: Respiratory diseases are a major cause of human illness and death worldwide. Phytochemicals, particularly tannins, are being increasingly studied for their beneficial properties in tackling a wide range of non-malignant respiratory diseases. Research has shown that tannins possess protective properties and their mechanistic pathways and clinical trial outcomes are discussed in this review.

JOURNAL OF NUTRITIONAL BIOCHEMISTRY (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Tuning the effective utilization of adsorption sites in La-MOFs via a steric hindrance effect towards enhanced As(iii) removal

Deng You et al.

Summary: Three La-MOF adsorbents, La-p-PTAs, La-m-PTAs and La-o-PTAs with different morphologies, were designed for efficient removal of As(iii) by altering the locations of the -COOH group. Among them, La-o-PTAs exhibited superior As(iii) adsorption performance, reaching a maximum adsorption capacity of 233.2 mg g(-1) within 30 minutes, due to increased utilization of adsorption sites and stronger interaction. This study emphasizes the critical importance of adsorption site utilization for efficient metal oxyanion remediation.

ENVIRONMENTAL SCIENCE-NANO (2021)

Add to Collection

Review Engineering, Environmental

Synthesising tannin-based coagulants for water and wastewater application: A review

Azreen Ibrahim et al.

Summary: Tannin, a natural water-soluble polyphenol present in most plant cells, is widely accepted and applied as a plant-based coagulant in water and wastewater treatment, effectively removing pollutants such as turbidity, colorants, suspended solids, chemical oxygen demand, algae, and heavy metals. The effectiveness of tannins as a coagulant is associated with their chemical structure and the degree of tannin modification, which are influenced by the plant source from which they are extracted.

JOURNAL OF ENVIRONMENTAL CHEMICAL ENGINEERING (2021)

Add to Collection

Article Engineering, Environmental

Polyethylenimine-modified chitosan materials for the recovery of La(III) from leachates of bauxite residue

Feiping Zhao et al.

CHEMICAL ENGINEERING JOURNAL (2020)

Add to Collection

Review Engineering, Environmental

Adsorption kinetic models: Physical meanings, applications, and solving methods

Jianlong Wang et al.

JOURNAL OF HAZARDOUS MATERIALS (2020)

Add to Collection

Article Engineering, Chemical

Insight into adsorption of combined antibiotic-heavy metal contaminants on graphene oxide in water

Na Yao et al.

SEPARATION AND PURIFICATION TECHNOLOGY (2020)

Add to Collection

Article Engineering, Chemical

Recovery of Ge(IV) from synthetic leaching solution of secondary zinc oxide by solvent extraction using tertiary amine (N235) as extractant and trioctyl phosphate (TOP) as modifier

Tao Zhang et al.

MINERALS ENGINEERING (2019)

Add to Collection

Article Engineering, Chemical

Persimmon tannin/graphene oxide composites: Fabrication and superior adsorption of germanium ions in aqueous solution

Yingying Zhang et al.

JOURNAL OF THE TAIWAN INSTITUTE OF CHEMICAL ENGINEERS (2019)

Add to Collection

Article Engineering, Chemical

Selective recovery of germanium from iron-rich solutions using a supported ionic liquid phase (SILP)

Stijn Van Roosendael et al.

SEPARATION AND PURIFICATION TECHNOLOGY (2019)

Add to Collection

Article Chemistry, Multidisciplinary

Fast Coadsorption and Selective Separation of Gallium(III) and Germanium(IV) from Aqueous Solutions by 3D Hierarchical Porous Hoya-like α-FeOOH

Xianqi Wu et al.

ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2019)

Add to Collection

Article Chemistry, Physical

Comparison of linearization methods for modeling the Langmuir adsorption isotherm

Xuan Guo et al.

JOURNAL OF MOLECULAR LIQUIDS (2019)

Add to Collection

Review Engineering, Chemical

Regeneration of chitosan-based adsorbents used in heavy metal adsorption: A review

Mohammadtaghi Vakili et al.

SEPARATION AND PURIFICATION TECHNOLOGY (2019)

Add to Collection

Article Environmental Sciences

Adsorption and co-adsorption of tetracycline and doxycycline by one-step synthesized iron loaded sludge biochar

Jia Wei et al.

CHEMOSPHERE (2019)

Add to Collection

Article Engineering, Environmental

Competitive adsorption of As(III) and As(V) onto chitosan/diatomaceous earth adsorbent

Suhaib S. Salih et al.

JOURNAL OF ENVIRONMENTAL CHEMICAL ENGINEERING (2019)

Add to Collection

Article Engineering, Environmental

Comparison of coagulation and magnetic chitosan nanoparticle adsorption on the removals of organic compound and coexisting humic acid: A case study with salicylic acid

Ning Wang et al.

CHEMICAL ENGINEERING JOURNAL (2018)

Add to Collection

Article Metallurgy & Metallurgical Engineering

Recovery of germanium from leach solutions of fly ash using solvent extraction with various extractants

Hossein Kamran Haghighi et al.

HYDROMETALLURGY (2018)

Add to Collection

Article Materials Science, Ceramics

Chemical order in Ga or Sb modified germanium sulfide glasses around stoichiometry: High-resolution XPS and Raman studies

R. Golovchak et al.

JOURNAL OF NON-CRYSTALLINE SOLIDS (2018)

Add to Collection

Article Engineering, Chemical

Nanofiltration of indium and germanium ions in aqueous solutions: Influence of pH and charge on retention and membrane flux

Arite Werner et al.

SEPARATION AND PURIFICATION TECHNOLOGY (2018)

Add to Collection

Article Metallurgy & Metallurgical Engineering

Recovery and separation of gallium(III) and germanium(IV) from zinc refinery residues : Part II: Solvent extraction

Fupeng Liu et al.

HYDROMETALLURGY (2017)

Add to Collection

Article Materials Science, Biomaterials

Equilibrium, kinetics and mechanism of Au3+ Pd2+ and Ag+ ions adsorption from aqueous solutions by graphene oxide functionalized persimmon tannin

Zhongmin Wang et al.

MATERIALS SCIENCE AND ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2017)

Add to Collection

Review Engineering, Environmental

Tannin-based biosorbents for environmental applications - A review

Hugo A. M. Bacelo et al.

CHEMICAL ENGINEERING JOURNAL (2016)

Add to Collection

Article Biochemistry & Molecular Biology

Protocatechuic acid grafted onto chitosan: Characterization and antioxidant activity

Jun Liu et al.

INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES (2016)

Add to Collection

Article Chemistry, Applied

Mechanism of Au(III) reduction by chitosan: Comprehensive study with 13C and 1H NMR analysis of chitosan degradation products

Alexander Pestov et al.

CARBOHYDRATE POLYMERS (2015)

Add to Collection

Article Engineering, Chemical

Green Synthesis of Magnetic EDTA- and/or DTPA-Cross-Linked Chitosan Adsorbents for Highly Efficient Removal of Metals

Feiping Zhao et al.

INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2015)

Add to Collection

Article Chemistry, Physical

Evaluation of chemical and structural properties of germanium-carbon coatings deposited by plasma enhanced chemical vapor deposition

Hossein Jamali et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2015)

Add to Collection

Article Chemistry, Physical

Adsorption of Cd(II) and Pb(II) by a novel EGTA-modified chitosan material: Kinetics and isotherms

Feiping Zhao et al.

JOURNAL OF COLLOID AND INTERFACE SCIENCE (2013)

Add to Collection

Article Materials Science, Multidisciplinary

Hydrophilic and hydrophobic interactions in cross-linked chitosan membranes

Luciano Mengatto et al.

MATERIALS CHEMISTRY AND PHYSICS (2013)

Add to Collection

Article Engineering, Chemical

Selective recovery of germanium with N-methylglucamine functional resin from sulfate solutions

Sami Virolainen et al.

SEPARATION AND PURIFICATION TECHNOLOGY (2013)

Add to Collection

Article Engineering, Chemical

Recovery of germanium from real fly ash leachates by ion-exchange extraction

F. Arroyo Torralvo et al.

MINERALS ENGINEERING (2011)

Add to Collection

Article Engineering, Environmental

Adsorption of Co(II) and Ni(II) by EDTA- and/or DTPA-modified chitosan: Kinetic and equilibrium modeling

Eveliina Repo et al.

CHEMICAL ENGINEERING JOURNAL (2010)

Add to Collection

Article Chemistry, Applied

Conjugation of gallic acid onto chitosan: An approach for green and water-based antioxidant

Wanvimol Pasanphan et al.

CARBOHYDRATE POLYMERS (2008)

Add to Collection

Article Metallurgy & Metallurgical Engineering

Behavior of tannins in germanium recovery by tannin process

Duoqiang Liang et al.

HYDROMETALLURGY (2008)

Add to Collection

Article Chemistry, Physical

A new strategy for germanium adsorption on activated carbon by complex formation

J. P. Marco-Lozar et al.

CARBON (2007)

Add to Collection

© Peeref 2019-2024. All rights reserved.