Related references
Note: Only part of the references are listed.Novel low-temperature H2S removal technology by developing yellow phosphorus and phosphate rock slurry as absorbent
Yi Mei et al.
JOURNAL OF HAZARDOUS MATERIALS (2021)
Ethanol sensor using gadolinia-doped ceria solid electrolyte and double perovskite structure sensing material
Tong Liu et al.
SENSORS AND ACTUATORS B-CHEMICAL (2021)
Insight into the effect of the continuous testing and aging on the SO2 sensing characteristics of a YSZ (Yttria-stabilized Zirconia)-based sensor utilizing ZnGa2O4 and Pt electrodes
Xidong Hao et al.
JOURNAL OF HAZARDOUS MATERIALS (2020)
In situ deposited hierarchical CuO/NiO nanowall arrays film sensor with enhanced gas sensing performance to H2S
Lili Sui et al.
JOURNAL OF HAZARDOUS MATERIALS (2020)
YSZ-based solid electrolyte type sensor utilizing ZnMoO4 sensing electrode for fast detection of ppb-level H2S
Fangmeng Liu et al.
SENSORS AND ACTUATORS B-CHEMICAL (2020)
Mixed potential gas phase sensor using YSZ solid electrolyte and spinel-type oxides AMn2O4 (A = Co, Zn and Cd) sensing electrodes
Xidong Hao et al.
SENSORS AND ACTUATORS B-CHEMICAL (2020)
Mixed potential type H2S sensor based on stabilized zirconia and a Co2SnO4 sensing electrode for halitosis monitoring
Caileng Wang et al.
SENSORS AND ACTUATORS B-CHEMICAL (2020)
Synthesis and low-temperature sensing property of the porous ZnCo2O4 nanosheets
Xinming Gao et al.
JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS (2019)
A finite element model for mixed potential sensors
Thomas Ritter et al.
SENSORS AND ACTUATORS B-CHEMICAL (2019)
High NH3 selectivity of NiFe2O4 sensing electrode for potentiometric sensor at elevated temperature
Bin Yang et al.
ANALYTICA CHIMICA ACTA (2019)
On the influence of the NOx equilibrium reaction on mixed potential sensor signals: A comparison between FE modelling and experimental data
Thomas Ritter et al.
SENSORS AND ACTUATORS B-CHEMICAL (2019)
Mixed potential type acetone sensor based on Ce0.8Gd0.2O1.95 and Bi0.5La0.5FeO3 sensing electrode used for the detection of diabetic ketosis
Tong Liu et al.
SENSORS AND ACTUATORS B-CHEMICAL (2019)
Enhanced H2S gas-sensing performance of Zn2SnO4 hierarchical quasi-microspheres constructed from nanosheets and octahedra
Ting-Ting Xu et al.
JOURNAL OF HAZARDOUS MATERIALS (2019)
Effects of Pt loading onto SnO2 electrodes on CO-sensing properties and mechanism of potentiometric gas sensors utilizing an anion-conducting polymer electrolyte
Takeo Hyodo et al.
SENSORS AND ACTUATORS B-CHEMICAL (2019)
Photocatalytic degradation of H2S aqueous media using sulfide nanostructured solid-solution solar-energy-materials to produce hydrogen fuel
Mohsen Lashgari et al.
JOURNAL OF HAZARDOUS MATERIALS (2018)
Resistance-based H2S gas sensors using metal oxide nanostructures: A review of recent advances
Ali Mirzaei et al.
JOURNAL OF HAZARDOUS MATERIALS (2018)
YSZ-based mixed potential H2S sensor using La2NiO4 sensing electrode
Xidong Hao et al.
SENSORS AND ACTUATORS B-CHEMICAL (2018)
Mixed potential type sensor based on stabilized zirconia and Co1-xZnx Fe2O4 sensing electrode for detection of acetone
Xidong Hao et al.
SENSORS AND ACTUATORS B-CHEMICAL (2018)
Facile on-chip electrospinning of ZnFe2O4 nanofiber sensors with excellent sensing performance to H2S down ppb level
Nguyen Van Hoang et al.
JOURNAL OF HAZARDOUS MATERIALS (2018)
Sensors based on mesoporous SnO2-CuWO4 with high selective sensitivity to H2S at low operating temperature
Adelina Stanoiu et al.
JOURNAL OF HAZARDOUS MATERIALS (2017)
High-temperature NO2 gas sensor based on stabilized zirconia and CoTa2O6 sensing electrode
Fangmeng Liu et al.
SENSORS AND ACTUATORS B-CHEMICAL (2017)
Spinel ferrite nanoparticles for H2S gas sensor
Ahmad I. Ayesh et al.
APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING (2017)
Fabrication of Well-Ordered Three-Phase Boundary with Nanostructure Pore Array for Mixed Potential-Type Zirconia-Based NO2 Sensor
Bin Wang et al.
ACS APPLIED MATERIALS & INTERFACES (2016)
Highly selective gas sensing properties of partially inversed spinel zinc ferrite towards H2S
Jiangtao Wu et al.
SENSORS AND ACTUATORS B-CHEMICAL (2016)
A highly sensitive room temperature H2S gas sensor based on SnO2 multi-tube arrays bio-templated from insect bristles
Junlong Tian et al.
DALTON TRANSACTIONS (2015)
Release and control of hydrogen sulfide during sludge thermal drying
Huanxin Weng et al.
JOURNAL OF HAZARDOUS MATERIALS (2015)
A fast response & recovery H2S gas sensor based on α-Fe2O3 nanoparticles with ppb level detection limit
Zhijie Li et al.
JOURNAL OF HAZARDOUS MATERIALS (2015)
A review of mixed-potential type zirconia-based gas sensors
Norio Miura et al.
IONICS (2014)
Modeling of H2S migration through landfill cover materials
Qiyong Xu et al.
JOURNAL OF HAZARDOUS MATERIALS (2014)
Effect of electrode microstructure on the sensitivity and response time of potentiometric NOx sensors based on stabilized-zirconia and La5/3Sr1/3NiO4-YSZ sensing electrode
Ying Chen et al.
SOLID-STATE ELECTRONICS (2014)
Coupled Metal Oxide-Doped Pt/SnO2 Semiconductor and Yittria-Stabilized Zirconia Electrochemical Sensors for Detection of VOCs
Monireh Kasalizadeh et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2013)
CO sensing characteristics of YSZ-based planar sensor using Rh-sensing electrode composed of tetrahedral sub-micron particles
Vladimir V. Plashnitsa et al.
ELECTROCHEMISTRY COMMUNICATIONS (2011)
Development of high sensitivity potentiometric NOx sensor and its application to breath analysis
Suvra Prakash Mondal et al.
SENSORS AND ACTUATORS B-CHEMICAL (2011)
Mixed-potential-type zirconia-based NO2 sensor with high-performance three-phase boundary
Xishuang Liang et al.
SENSORS AND ACTUATORS B-CHEMICAL (2011)
Investigation of WO3-based potentiometric sensor performance (M/YSZ/WO3, M = Au, Pd, and TiO2) with varying counter electrode
Jiho Yoo et al.
SOLID STATE IONICS (2008)
Stabilized zirconia-based sensors using WO3 electrode for detection of NO or NO2
G Lu et al.
SENSORS AND ACTUATORS B-CHEMICAL (2000)