☆ 4.7 Review

A review of piezoelectric energy harvesters for harvesting wind energy

SENSORS AND ACTUATORS A-PHYSICAL (2023)

Related references

Note: Only part of the references are listed.

Article Green & Sustainable Science & Technology

A Hybrid Self-Powered System Based on Wind Energy Harvesting for Low-Power Sensors on Canyon Bridges

Hao Cao et al.

Summary: This paper proposes a hybrid wind energy harvesting system to power low-power sensors on canyon bridges by converting canyon cross wind into electricity. The system integrates piezoelectric and electromagnetic mechanisms, and uses a special magnet arrangement to reduce wind speed and resistance torque. Experimental results show that the system can effectively provide power for low-power sensors.

INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING-GREEN TECHNOLOGY (2023)

Add to Collection

Article Thermodynamics

Effects of beam splitting on photovoltaic properties of monocrystalline silicon, multicrystalline silicon, GaAs, and perovskite solar cells for hybrid utilization

Yu Gao et al.

Summary: This study evaluates the applicability of monocrystalline silicon, multicrystalline silicon, GaAs, and perovskite solar cells in beam-splitting hybrid systems by analyzing their photovoltaic properties. The results show that silicon solar cells are ineffective for beam-splitting hybrid utilization, while GaAs solar cells can benefit from beam splitting to improve power conversion efficiency. Perovskite solar cells exhibit great potential for hybrid utilization.

INTERNATIONAL JOURNAL OF GREEN ENERGY (2023)

Add to Collection

Article Engineering, Mechanical

Enhanced performance of airfoil-based piezoelectric energy harvester under coupled flutter and vortex-induced vibration

Chenxia Wan et al.

Summary: This paper presents the design of a novel energy harvester that can transform vibration modes and improve harvesting performance. By attaching a piezoelectric device to an unconstrained trailing-edge flap, the harvester is able to convert fluid-structure-electric coupled fields to generate electricity. The study explores the influence of flap motions and structural parameters on flow field, vibration characteristics, and harvesting performance using mathematical modeling, simulation, and experimental setups. The results demonstrate the effectiveness of the design in improving the harvesting performance and provide important insights for future development of more efficient piezoelectric energy harvesters for low-power wireless sensor systems.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2023)

Add to Collection

Article Acoustics

Scavenging energy from aeroelastic vibrations for hybrid stall control in a fixed-wing micro aerial vehicle

Ali Esmaeili et al.

Summary: This study explores the possibility of scavenging energy from aeroelastic vibrations to improve the aerodynamic performance of fixed-wing micro aerial vehicles. The passive component of the system generates intense vortices, resulting in vortex-induced vibrations. By installing a piezoelectric energy harvesting device and tuning it for resonant response, the extracted power from structural vibrations can be used to power the active component of the stall control system.

JOURNAL OF VIBRATION AND CONTROL (2023)

Add to Collection

Article Physics, Applied

An in-plane omnidirectional piezoelectric wind energy harvester based on vortex-induced vibration

Shen Li et al.

Summary: This study proposes an in-plane omnidirectional piezoelectric wind energy harvester (WEH) that can improve the omnidirectionality of wind energy harvesting by enhancing the isotropies of the aerodynamic force, stiffness, and electromechanical conversion. A mathematical model suitable for arbitrary wind directions is derived, and simulations and experiments show that the device's performance is satisfactory and is not significantly affected by the wind direction. The research provides reference for the development of omnidirectional wind-induced vibration WEHs.

APPLIED PHYSICS LETTERS (2022)

Add to Collection

Article Energy & Fuels

Mechanical Durability Assessment of an Energy-Harvesting Piezoelectric Inverted Flag

Kaidong Yang et al.

Summary: This study presents an assessment of the endurance of an inverted flag energy harvester, indicating that structural fatigue poses a practical obstacle to its wider development. Further work is needed to improve the fatigue resistance of the flag material.

ENERGIES (2022)

Add to Collection

Article Thermodynamics

Micro windmill piezoelectric energy harvester based on vortex- induced vibration in tunnel

Xiaozhen Du et al.

Summary: The study introduces a micro windmill piezoelectric energy harvester based on vortex-induced vibration (VIV) which effectively improves the efficiency of wind energy conversion through experiments and theoretical research. By increasing airflow speed and fixing a bluff body in the flow field to induce vortex, it can effectively excite the vibration of the piezoelectric film.

ENERGY (2022)

Add to Collection

Article Thermodynamics

Effective design and characterization of flutter-based piezoelectric energy harvesters with discontinuous nonlinearities

A. Bouma et al.

Summary: This study investigates the design and nonlinear characteristics of a two-degree of freedom piezoaeroelastic energy harvesting system with freeplay and multi-segmented nonlinearities. The analysis explores the nonlinear responses under different conditions and proposes an effective design approach for harvesting energy at low wind speeds.

ENERGY (2022)

Add to Collection

Article Thermodynamics

An investigation on a cylinder harvester made of piezoelectric coupled torsional beams

Xiangdong Xie et al.

Summary: A theoretical model is developed for a piezoelectric coupled torsional beam to utilize the positive effect of the piezoelectric material. A corresponding cylinder harvester is presented, made of a series of paired PCTBs and excitation teeth, successfully inducing torsional shear to the piezoelectric bimorphs leading to energy harvesting. The research results show that the RMS of the electric power can reach up to 8.426 KW for a cylinder harvester structure with a radius of 0.5 m.

ENERGY CONVERSION AND MANAGEMENT (2022)

Add to Collection

Review Thermodynamics

A review of flow-induced vibration energy harvesters

Xiaoqing Ma et al.

Summary: This paper comprehensively reviews the recent advances in flow-induced vibration energy harvesters in terms of their working principles, categories, enhancement methods, model derivation and calculation methods, influence of interface circuits, and energy harvesting efficiency calculation methods. The working principles and current development progress of various types of energy harvesters are discussed. Enhancement methods and critical challenges are characterized and summarized. Future research directions and prospects are proposed and discussed.

ENERGY CONVERSION AND MANAGEMENT (2022)

Add to Collection

Article Engineering, Electrical & Electronic

Winding vibration analysis of unbalanced transformer based on electromagnetic-mechanical coupling

Chao Pan et al.

Summary: This study investigates the changes in the internal electromagnetic environment of the transformer under different operating modes through electromagnetic-mechanical coupling, establishing a simulation model and experimental platform. It summarizes a feasible method for extracting abnormal characteristics of unbalanced winding operation.

INTERNATIONAL JOURNAL OF ELECTRICAL POWER & ENERGY SYSTEMS (2022)

Add to Collection

Article Materials Science, Multidisciplinary

Theoretical Study of a Two-Degree-of-Freedom Piezoelectric Energy Harvester under Concurrent Aeroelastic and Base Excitation

Guobiao Hu et al.

Summary: This paper studies the performance of a two-degree-of-freedom piezoelectric energy harvester under concurrent aeroelastic and base excitation. The theoretical model is developed and solved analytically, and an equivalent circuit model is established based on electro-mechanical analogies. The energy harvesting performance is investigated under different wind speeds but the same base excitation, and interesting phenomena such as quasi-periodic oscillation and peak-to-valley transition are observed and explained. The developed methodology can be easily adapted to analyze other similar types of multiple-degree-of-freedom PEHs under concurrent aeroelastic and base excitation.

JOURNAL OF INTELLIGENT MATERIAL SYSTEMS AND STRUCTURES (2022)

Add to Collection

Article Materials Science, Multidisciplinary

Uncertainty analysis of galloping based piezoelectric energy harvester system using polynomial neural network

Rakesha Chandra Dash et al.

Summary: This paper investigates the impact of uncertain input parameters on the electrical power generation of a galloping-based piezoelectric energy harvester, analyzing it through stochastic and sensitivity analysis. The study utilizes a polynomial neural network-based surrogate model to identify that the electromechanical coefficient has the greatest influence on power output.

JOURNAL OF INTELLIGENT MATERIAL SYSTEMS AND STRUCTURES (2022)

Add to Collection

Review Engineering, Multidisciplinary

MEMS technology and applications in geotechnical monitoring: a review

Milad Barzegar et al.

Summary: Conventional geotechnical monitoring instruments have limitations in terms of accuracy, durability, installation complexity, cost, and real-time measurement. Recent advancements in sensing technology, specifically MEMS, have provided new opportunities for overcoming these limitations. MEMS-based sensors are small, inexpensive, and capable of wireless operation, making them ideal for monitoring complex environments and large areas.

MEASUREMENT SCIENCE AND TECHNOLOGY (2022)

Add to Collection

Article Engineering, Mechanical

A unified equivalent circuit and impedance analysis method for galloping piezoelectric energy harvesters

Chunbo Lan et al.

Summary: A unified analysis framework for GPEHs is proposed in this paper, allowing insights at a system level. The framework is based on an equivalent circuit and equivalent impedance, providing a comprehensive view of the physics of linear GPEHs in different domains. By establishing analytical models, the framework eliminates the separation between the power performances of GPEHs connected with various interface circuits, facilitating the understanding of system power behavior.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2022)

Add to Collection

Article Engineering, Marine

Experimental hydrodynamic investigations on the effectiveness of inverted flag-based piezoelectric energy harvester in the wake of bluff body

M. Umair et al.

Summary: The experimental study focused on the flapping motion and energy harvesting performance of an inverted flag in the wake of a bluff body. Results indicated that an inverted flag with high peak-to-peak amplitude is preferred for piezoelectric energy harvesting, and vortices shed by upstream bluff body have a significant effect on the flapping amplitude of the downstream inverted flag.

OCEAN ENGINEERING (2022)

Add to Collection

Article Instruments & Instrumentation

Equivalent circuit modeling and analysis of aerodynamic vortex-induced piezoelectric energy harvesting

Jinda Jia et al.

Summary: This paper presents an equivalent circuit modeling (ECM) method for analyzing the performance of vortex-induced energy harvesters. The ECM builds equivalent analogies from the mechanical and fluid domain to the electrical domain, transforms the fluid-solid-electricity coupled mathematical equations into electrical formulations, and performs system-level transient analyses in circuit simulation software. The simulation results show good agreement with experimental measurements.

SMART MATERIALS AND STRUCTURES (2022)

Add to Collection

Article Energy & Fuels

A Highly Efficient Multifunctional Wind Barrier Based on PVDF for Power Generation in the Qinghai-Tibet Railway

Hao Wu et al.

Summary: This article introduces a novel and renewable wind barrier for harvesting wind energy on the Qinghai-Tibet railway. Through experiments, it is demonstrated that the wind barrier is capable of efficiently collecting wind energy in high wind speeds, providing a potential renewable energy source for the railway.

ENERGY TECHNOLOGY (2022)

Add to Collection

Review Environmental Sciences

A review on biomass and wind as renewable energy for sustainable environment

L. R. Amjith et al.

Summary: This review analyzes the potential of wind, biomass, and hybrid systems in renewable energy production and investigates the performance analysis and sustainability of biomass-based hybrid energy systems. The findings suggest that biomass-based hybrid energy systems can provide a cost-effective and environmentally friendly alternative for off-grid rural electrification.

CHEMOSPHERE (2022)

Add to Collection

Article Chemistry, Physical

The self-powered agricultural sensing system with 1.7 km wireless multichannel signal transmission using a pulsed triboelectric nanogenerator of corn husk composite film

Guangxiang Gu et al.

Summary: Food security is closely related to national security and people's livelihood. Using modern information technology for precise management of crop growth processes is an effective strategy to improve agricultural output. By developing a self-powered multichannel wireless agricultural sensing system, environmental information of farmland can be continuously monitored and transmitted, while also recycling abandoned crops, showing potential applications in the development of intelligent green agriculture.

NANO ENERGY (2022)

Add to Collection

Article Chemistry, Physical

Toward effective irregular wind energy harvesting: Self-adaptive mechanical design strategy of triboelectric-electromagnetic hybrid wind energy harvester for wireless environmental monitoring and green hydrogen production

Donghan Lee et al.

Summary: In this study, a self-adaptive triboelectric-electromagnetic hybrid wind energy harvester is proposed, which efficiently harvests wind energy by adopting a rational mechanical analysis-based design strategy. The design can operate effectively regardless of wind speed and achieves an energy conversion efficiency approximately 60 times higher than fixed mechanical design in specific wind environments.

NANO ENERGY (2022)

Add to Collection

Article Computer Science, Information Systems

A Novel Electromagnetic Transient Simulation Method of Large-Scale AC Power System With High Penetrations of DFIG-Based Wind Farms

Yifeng Dong et al.

Summary: This paper presents a novel simplified electromagnetic transient simulation method for large-scale power systems with high penetrations of DFIG-based wind farms. The method includes building a DFIG-based wind generator model to simplify the detailed switching process of power electronic devices and reproducing the external characteristics of the power system. An initialization technique is adopted to avoid unnecessary computation processes. The simulation tool developed based on this method demonstrates good accuracy and smooth startup. This proposed method can be used for electromagnetic transient simulation of large-scale AC power systems with high penetrations of RESs.

IEEE ACCESS (2022)

Add to Collection

Review Materials Science, Textiles

A review on piezoelectric fibers and nanowires for energy harvesting

Bilal Zaarour et al.

Summary: Recent advances in self-powered electronic devices have led to the development of energy-harvesting technology, with a focus on piezoelectric energy harvesters. Materials such as piezoelectric polymeric fibers, inorganic piezoelectric fibers, and inorganic nanowires show great potential for energy-harvesting applications.

JOURNAL OF INDUSTRIAL TEXTILES (2021)

Add to Collection

Article Energy & Fuels

An experimental study of a two-degree-of-freedom galloping energy harvester

Guobiao Hu et al.

Summary: This paper investigates the design and performance of a two-degree-of-freedom galloping-based piezoelectric energy harvester. The introduction of a secondary beam can reduce the cut-in wind speed and increase the power output. A well-tuned 2-DOF GPEH can achieve a power output increase of about 111.1% compared to a conventional 1-DOF GPEH.

INTERNATIONAL JOURNAL OF ENERGY RESEARCH (2021)

Add to Collection

Article Instruments & Instrumentation

Piezoelectric polymer energy harvesting system fluctuating in a high speed wind-flow around a running electric vehicle

Cheol Kim et al.

Summary: The study has demonstrated that a significant amount of electric power can be harvested from the passing wind around a vehicle for charging an EV battery. Wind tunnel tests showed that the 0.12 mm-thin PVDF beam-type and plate-type generated maximum power of 61.43 V and 21.5 mW, and 4.77 V and 0.191 mW, respectively, at a wind speed of 90 km/h. The experimental results on real cars also showed good agreement with numerical predictions and wind tunnel test results.

SMART MATERIALS AND STRUCTURES (2021)

Add to Collection

Article Energy & Fuels

Horizontally Assembled Trapezoidal Piezoelectric Cantilevers Driven by Magnetic Coupling for Rotational Energy Harvester Applications

Yonghyeon Na et al.

Summary: Horizontally assembled trapezoidal piezoelectric cantilevers driven by magnetic coupling were fabricated for rotational energy harvester applications and demonstrated effectiveness in wind energy harvesting. The cantilevers operate in a transverse mode and provide good output power at the optimized distance and design.

ENERGIES (2021)

Add to Collection

Article Energy & Fuels

An Electromagnetic Design of a Fully Superconducting Generator for Wind Application

Yingzhen Liu et al.

Summary: In this study, a fully superconducting wind generator with high torque density and low weight was analyzed. Through integrating electromagnetic design with AC loss estimation, the research demonstrated the potential and efficiency of the generator for preliminary design. It was found that reducing AC loss in stator coils can be achieved by adjusting tape width, coil spacing, number of coils, and working temperature, but careful design is required for optimal solutions.

ENERGIES (2021)

Add to Collection

Article Thermodynamics

Harvesting more energy from variable-speed wind by a multi-stable configuration with vortex-induced vibration and galloping

Zhiyong Zhou et al.

Summary: The novel multi-stable harvester aims to scavenge more energy from variable-speed wind by integrating galloping and vortex-induced vibration. Adjusting the distance between magnets can create bi-stability or tri-stability, with the tri-stable configuration outperforming the bi-stable one in wind energy harvesting performance. The tri-stable energy harvester can significantly enhance output voltage and generate large outputs by executing snap-through motions for wind speeds above 1.0 m s(-1).

ENERGY (2021)

Add to Collection

Article Thermodynamics

Wind piezoelectric energy harvesting enhanced by elastic-interfered wake-induced vibration

Zhimiao Yan et al.

Summary: A piezoelectric wind energy harvester inspired by wake induced vibration of tandem cylinders is proposed, with optimizations to aerodynamic forces. Experimental results showed that the harvested power is proportional to the third power of wind speed.

ENERGY CONVERSION AND MANAGEMENT (2021)

Add to Collection

Article Materials Science, Multidisciplinary

A direction adaptive hybrid piezo-electromagnetic energy harvester based on vortex-induced vibration

Huirong Zhang et al.

Summary: This paper presents a direction adaptive energy harvester that can scavenge energy from multiple wind directions, with experiments showing optimal power outputs of 5.19mW for piezoelectric generation and 0.32mW for electromagnetic generation in a specific wind speed range.

FERROELECTRICS (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Design and experiment investigation of a percussive piezoelectric energy harvester scavenging on wind galloping oscillation

Jinpeng Meng et al.

Summary: This article introduces a percussive piezoelectric energy harvester for scavenging on wind galloping oscillation, with experimental results showing an optimal critical wind speed for maximizing output power and suggesting methods for improving electrical performance.

FERROELECTRICS (2021)

Add to Collection

Article Engineering, Electrical & Electronic

Design and Characterization of Wind Energy Harvesting From a Trajectory-Controllable Piezoelectric Vibrator

Junwu Kan et al.

Summary: A novel piezoelectric wind turbine generator with a trajectory-controllable piezoelectric vibrator is proposed to improve reliability and efficiency. Experimental and simulation results confirm the effectiveness of controlling the deformation trajectory of the piezoelectric plate. Adjusting structural parameters such as exciting distance of magnets can broaden the wind speed bandwidth.

IEEE SENSORS JOURNAL (2021)

Add to Collection

Article Instruments & Instrumentation

A wind-induced negative damping method to achieve high-energy orbit of a nonlinear vibration energy harvester

Chunbo Lan et al.

Summary: Utilizing wind energy to assist a nonlinear vibration energy harvester in achieving high-energy orbit oscillation is an effective strategy, compared to traditional methods which may reduce energy harvesting efficiency. The proposed orbit-jump method is based on wind-induced negative damping mechanism and self-excited behavior, and its feasibility has been validated through numerical simulation and experiments, showing good stability in different excitation frequencies and acceleration levels.

SMART MATERIALS AND STRUCTURES (2021)

Add to Collection

Article Engineering, Mechanical

Enhancing energy harvesting from flow-induced vibrations of a circular cylinder using a downstream rectangular plate: An experimental study

Junlei Wang et al.

Summary: This study experimentally confirmed that placing a rectangular plate at the wake of a circular cylinder can significantly increase the effective wind speed range for energy harvesting. Different spacings between the cylinder and plate led to different effects, with the most effective design scheme being a 2D-high plate located around 0.2D to 0.4D downstream of the circular cylinder.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2021)

Add to Collection

Article Green & Sustainable Science & Technology

An innovative V-shaped piezoelectric energy harvester for wind energy based on the fully fluid-solid-electric coupling

Jianjun Liu et al.

Summary: An innovative V-shaped windward wings piezoelectric energy harvester (PEH) was proposed and designed to convert galloping-based vibration energy generated by wind flow into electricity more effectively. Wind tunnel experiments confirmed that a pair of 60-degree angles of V-shaped wings was the optimal angle for achieving peak-to-peak value of alternating current voltage (VAC-PP) of more than 100 V at a wind velocity of 10 m/s. The fully fluid-solid-electric coupling for the corresponding two-dimensional model was simulated by COMSOL Multiphysics, explaining the swing mechanism of the V-shaped PEH under galloping-based vibration and verifying the rationality of the experimental results.

JOURNAL OF RENEWABLE AND SUSTAINABLE ENERGY (2021)

Add to Collection

Article Engineering, Mechanical

Magnetically coupled piezoelectric galloping-based energy harvester using a tandem configuration

Wan Sun et al.

Summary: A piezoelectric galloping-based energy harvester utilizing magnetic coupling effect to enhance energetic performance was proposed and studied, showing good agreement between experimental and analytical results, with significant power improvement.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2021)

Add to Collection

Article Engineering, Mechanical

Machine learning based prediction of piezoelectric energy harvesting from wake galloping

Chengyun Zhang et al.

Summary: The study investigates the vibration response of wake galloping piezoelectric energy harvesters in different configurations, finding significant impacts of parameters such as upstream obstacle cross-section, equivalent diameter ratio, distance between objects' centers, and velocity span. Machine learning models were trained to predict voltage and maximum displacement values, with gradient boosting regression trees performing optimally in predictions within the test range of parameters.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2021)

Add to Collection

Article Green & Sustainable Science & Technology

Piezoelectric energy harvester converting wind aerodynamic energy into electrical energy for microelectronic application

R. Sitharthan et al.

Summary: A novel piezoelectric energy harvesting device has been developed for low power electronic devices, utilizing wind vibration to generate electricity. Experimental results show that the system produces 120-200eV voltage at wind speeds of 4-9m/s, independent of input frequency.

IET RENEWABLE POWER GENERATION (2021)

Add to Collection

Article Engineering, Mechanical

A hybrid piezo-dielectric wind energy harvester for high-performance vortex-induced vibration energy harvesting

Zhihui Lai et al.

Summary: This paper introduces a novel hybrid piezo-dielectric wind energy harvester that efficiently harvests vortex-induced vibration (VIV) energy from low-speed wind by combining piezoelectric ceramic and a vibro-impact dielectric elastomer generator. Experimental and numerical studies show that the hybrid harvester can effectively collect energy in the lock-in region of VIV, with the vibro-impact DEG generating higher power. This highlights the superiority of the hybrid harvester design.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2021)

Add to Collection

Article Green & Sustainable Science & Technology

Study on mirror-image rotating piezoelectric energy harvester

Gang Yu et al.

Summary: A novel mirror-image rotating piezoelectric energy harvester with multiple resonant frequencies was proposed, broadening the bandwidth and establishing a mathematical model. Experimental results show that under certain parameters, the device has high power generation efficiency, and can quickly power other devices.

RENEWABLE ENERGY (2021)

Add to Collection

Article Chemistry, Analytical

Study of Building Safety Monitoring by Using Cost-Effective MEMS Accelerometers for Rapid After-Earthquake Assessment with Missing Data

Jian-Fu Lin et al.

Summary: This study explores the use of cost-effective MEMS accelerometers for rapid post-earthquake assessment of buildings, conducting parameter analysis and equipment selection experiments, and proposing a rapid assessment scheme.

SENSORS (2021)

Add to Collection

Article Instruments & Instrumentation

Planform geometry effects of piezoelectric wind energy harvesting composite inverted flags

Kaidong Yang et al.

Summary: This study investigates how the dynamics and power generation performance of energy harvesting devices based on the inverted flag configuration vary with planform geometry. The results show that for a given mass ratio, flapping amplitude, frequency, power, and power density are all inversely proportional to aspect ratio and proportional to second moment of planform area. The second moment of planform area is a better indicator parameter to assess the flags performance compared to the aspect ratio.

SMART MATERIALS AND STRUCTURES (2021)

Add to Collection

Review Chemistry, Physical

A comprehensive review on the state-of-the-art of piezoelectric energy harvesting

Nurettin Sezer et al.

Summary: Piezoelectric energy harvesting technology converts mechanical energy into electric power and has gained significant attention in the scientific community. Advances in materials and manufacturing processes are expected to power many electronics with piezoelectric generators in the future.

NANO ENERGY (2021)

Add to Collection

Article Engineering, Mechanical

Wind-Driven Leaf-Like Thin-Film Piezoelectric Harvester for Low Wind Applications

E. Varadha et al.

Summary: Experimental research showed that under favorable conditions, a leaf with reticulate venation had over 10% more voltage output compared to parallel venation. Additionally, an increase in cantilever length significantly boosted voltage output by promoting early flutter onset.

JOURNAL OF VIBRATION ENGINEERING & TECHNOLOGIES (2021)

Add to Collection

Article Chemistry, Physical

Enhanced piezoelectric wind-induced vibration energy harvester via the interplay between cylindrical shell and diamond-shaped baffle

Junwu Kan et al.

Summary: This paper presents an enhanced piezoelectric wind-induced vibration energy harvester (EPWEH) that improves reliability, environmental adaptability, and power generation performance by introducing a downstream diamond-shaped baffle to change the aeroelastic instability of the cylindrical shell. Experimental results demonstrate that the compound-embedded structure significantly enhances the power generation performance of EPWEH, achieving a high voltage output enhancement and maximum output power density.

NANO ENERGY (2021)

Add to Collection

Article Thermodynamics

On the use of metasurface for Vortex-Induced vibration suppression or energy harvesting

Junlei Wang et al.

Summary: This paper investigates the use of metasurface patterns to modify the aerodynamic characteristics of bluff bodies for vortex-induced vibration (VIV) suppression or enhancement. Experimental validation and theoretical modeling are used to analyze the impact of metasurfaces on aerodynamic behaviors and vortex shedding processes. The study provides insights into the mechanisms behind the influence of metasurfaces on VIV systems, suggesting practical recommendations for using piezoelectric transducers with moderate coupling coefficients.

ENERGY CONVERSION AND MANAGEMENT (2021)

Add to Collection

Article Thermodynamics

Development of a novel non-contact piezoelectric wind energy harvester excited by vortex-induced vibration

Shuyun Wang et al.

Summary: By utilizing a novel non-contact vortex-induced vibration-based piezoelectric wind energy harvester, the reliability and environmental adaptability have been enhanced. Through optimization of design and experimental validation, the maximum output power reached 1.438 mW and it can effectively operate within a wide wind speed range. With an increase in wind speed, enhancing transducer mass and decreasing shell mass can improve wind speed bandwidth, vibration displacement and output voltage.

ENERGY CONVERSION AND MANAGEMENT (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Improved theoretical analysis and design guidelines of a two-degree-of-freedom galloping piezoelectric energy harvester

Guobiao Hu et al.

Summary: This paper presents an improved analysis of a two-degree-of-freedom (2DOF) galloping-based piezoelectric energy harvester (GPEH). The theoretical model and equivalent circuit model of the 2DOF GPEH are established, and detailed theoretical analysis and circuit simulation provide insights into its dynamic behavior. Design guidelines for reducing the cut-in wind speed and improving voltage output are also provided.

JOURNAL OF INTELLIGENT MATERIAL SYSTEMS AND STRUCTURES (2021)

Add to Collection

Article Energy & Fuels

Cut-corner prism piezoelectric energy harvester based on galloping enhancement mechanism

Weizhe Wang et al.

Summary: A cut-corner prism piezoelectric energy harvester based on galloping enhancement is designed to improve the energy harvesting efficiency. Optimizing the cut-corner size increases the energy collection performance effectively.

ENERGY REPORTS (2021)

Add to Collection

Article Physics, Applied

Harvesting wind energy with a bi-stable configuration integrating vortex-induced vibration and galloping

Yuansheng Wang et al.

Summary: This paper introduces a wind energy harvester that combines VIV, galloping, and multi-stability, demonstrating through validation experiments its ability to maintain a large output in variable-speed wind environments.

JOURNAL OF PHYSICS D-APPLIED PHYSICS (2021)

Add to Collection

Article Robotics

Hermes-Wind Energy Harvesting Wireless System for Sensing AoA and Wind Speed

Suryansh Sharma et al.

Summary: Hermes is a novel, low-cost, wireless, batteryless energy harvesting system designed for sensing wind speed and Angle of Attack (AoA) simultaneously. Utilizing piezoelectric films that flutter due to incoming wind, Hermes is able to determine wind speed and AoA accurately. The system can harvest an average power of 440 micro Watts and has high accuracy in estimating wind speed and AoA over a wide range of angles.

IEEE ROBOTICS AND AUTOMATION LETTERS (2021)

Add to Collection

Review Instruments & Instrumentation

Rotational energy harvesting systems using piezoelectric materials: A review

Zhe Wang et al.

Summary: In the past few decades, rotary energy harvesting has gained more attention and significant progress. This paper provides a comprehensive review of energy harvesting techniques using piezoelectric materials from rotary motion. It compares four types of rotational energy harvesting technologies and discusses the future direction for improving energy harvesting technology.

REVIEW OF SCIENTIFIC INSTRUMENTS (2021)

Add to Collection

Article Instruments & Instrumentation

Enhancing piezoelectric energy harvesting from the flow-induced vibration of a circular cylinder using dual splitters

Junlei Wang et al.

Summary: This study aimed to enhance piezoelectric energy harvesting from the flow-induced vibration of a circular cylinder by using two symmetric splitters. The research found that the energy harvesting efficiency varied with different positions of the dual splitters, with the optimal position at 60 degrees showing a maximum output voltage increase of 188.61%. Additionally, the study examined the influence of vortex interactions on the transition from VIV to galloping.

SMART MATERIALS AND STRUCTURES (2021)

Add to Collection

Article Chemistry, Physical

Self-powered 5G NB-IoT system for remote monitoring applications

Guosheng Hu et al.

Summary: This study introduces a self-powered 5G narrowband IoT system for remote fire monitoring, driven by a magnetic-assisted noncontact energy harvester. Through optimizing a magnetic arrangement, the rotating peak torque can be reduced more than 93%, providing an effective strategy for practical applications of self-powered remote monitoring systems.

NANO ENERGY (2021)

Add to Collection

Article Thermodynamics

A novel wind energy harvesting system with hybrid mechanism for self-powered applications in subway tunnels

Peng Zheng et al.

Summary: This paper presents a new self-powered system for WSN nodes in subway tunnels, which collects and converts wind energy in tunnels to provide stable power supply for the nodes, ensuring continuous and stable power support for systems in subway tunnels.

ENERGY (2021)

Add to Collection

Article Thermodynamics

Stochastic analysis of a galloping-random wind energy harvesting performance on a buoy platform

Kai Yang et al.

Summary: A new concept of a wind energy harvester based on galloping and stochastic vibration energy is proposed and comprehensively investigated through wind tunnel experiments and theoretical study, showing that strong stochastic excitation intensity is beneficial for broadband energy harvesting. The study also reveals that a low structural natural frequency and a large aerodynamic mass ratio can improve harvester performance.

ENERGY CONVERSION AND MANAGEMENT (2021)

Add to Collection

Article Thermodynamics

A piezoelectric wind energy harvester excited indirectly by a coupler via magnetic-field coupling

Junwu Kan et al.

Summary: A piezoelectric wind energy harvester excited indirectly by a coupler via magnetic-field coupling is proposed in this paper, which can transform composite vibration energy into electric energy; The feasibility of the structure and principle of the harvester is proved through theoretical simulations and experiments, and it is found that the performance of the harvester can be adjusted by changing the structural parameters.

ENERGY CONVERSION AND MANAGEMENT (2021)

Add to Collection

Article Thermodynamics

Exploring the potential benefits of using metasurface for galloping energy harvesting

Junlei Wang et al.

Summary: This paper explores the potential application of metasurfaces in designing aerodynamic systems, focusing on improving galloping energy harvesting. Different metasurfaces are proposed to be wrapped on bluff bodies, with experimental results confirming the benefits of using convex cylinder metasurfaces for enhancing energy harvesting performance.

ENERGY CONVERSION AND MANAGEMENT (2021)

Add to Collection

Review Chemistry, Analytical

A Systematic Review of Piezoelectric Materials and Energy Harvesters for Industrial Applications

Abdul Aabid et al.

Summary: In the past three decades, smart materials, particularly piezoelectric materials, have gained popularity for their energy conversion properties. This review article focuses on piezoelectric energy harvesters (PEH's) and provides a detailed study, along with discussions on the challenges and potential applications in renewable energy.

SENSORS (2021)

Add to Collection

Article Engineering, Electrical & Electronic

Environment coupled piezoelectric galloping wind energy harvesting

Ting Tan et al.

Summary: The environmental adaptability of galloping piezoelectric energy harvester on atmospheric temperature and wind speed was investigated, and the empirical coefficients of nonlinear piezoelectric parameters varied by the temperature are identified. Wind-tunnel tests and analytical solutions of the nonlinear coupled continuous model were used to determine the optimal load resistance for specific environmental conditions. Higher temperatures benefit the onset speed of energy harvesting during low wind speeds.

SENSORS AND ACTUATORS A-PHYSICAL (2021)

Add to Collection

Article Instruments & Instrumentation

Piezoelectric energy harvesting from flow-induced vibrations of a square cylinder at various angles of attack

Junlei Wang et al.

Summary: The study evaluates the performance of a piezoelectric energy harvester with a square cylinder bluff body under different angles of attack. It suggests that the optimal angle of attack for energy harvesting is 10 degrees, with a 29.50% increase in output power compared to the traditional harvester at 0 degrees angle of attack.

SMART MATERIALS AND STRUCTURES (2021)

Add to Collection

Article Energy & Fuels

On the performance improvement of a flutter based energy harvester by introducing additional wake field

Ankit Agarwal et al.

Summary: This study experimentally and numerically investigates the dynamics of flutter oscillation in a plane structure in order to improve the performance of a flutter-based energy harvester. The results show that the critical velocity of flutter can be notably reduced by adding an upstream bluff body, leading to enhanced efficiency of the energy harvester.

ENERGY SOURCES PART A-RECOVERY UTILIZATION AND ENVIRONMENTAL EFFECTS (2021)

Add to Collection

Article Green & Sustainable Science & Technology

Design and Implementation of a Maximum Power Point Tracking System for a Piezoelectric Wind Energy Harvester Generating High Harmonicity

Erol Kurt et al.

Summary: In this study, a maximum power point tracking (MPPT) system was designed and implemented for a new piezoelectric wind energy harvester. Experimental results showed that the system significantly reduces energy loss, increases efficiency, and lowers power consumption.

SUSTAINABILITY (2021)

Add to Collection

Article Chemistry, Physical

On the first principle theory of nanogenerators from Maxwell's equations

Zhong Lin Wang

NANO ENERGY (2020)

Add to Collection

Article Engineering, Mechanical

Design, modeling and experiments of broadband tristable galloping piezoelectric energy harvester

Junlei Wang et al.

ACTA MECHANICA SINICA (2020)

Add to Collection

Article Engineering, Aerospace

Numerical and experimental investigation of piezoelectric energy harvester based on flag-flutter

Marco Eugeni et al.

AEROSPACE SCIENCE AND TECHNOLOGY (2020)

Add to Collection

Article Physics, Applied

Synchronization extension using a bistable galloping oscillator for enhanced power generation from concurrent wind and base vibration

Liya Zhao

APPLIED PHYSICS LETTERS (2020)

Add to Collection

Article Thermodynamics

A novel self-tuning wind energy harvester with a slidable bluff body using vortex-induced vibration

Wan Sun et al.

ENERGY CONVERSION AND MANAGEMENT (2020)

Add to Collection

Article Thermodynamics

A comprehensive study of non-linear air damping and pull-in effects on the electrostatic energy harvesters

Xinge Guo et al.

ENERGY CONVERSION AND MANAGEMENT (2020)

Add to Collection

Article Engineering, Electrical & Electronic

Wireless Rail Fastener Looseness Detection Based on MEMS Accelerometer and Vibration Entropy

Zhikun Zhan et al.

IEEE SENSORS JOURNAL (2020)

Add to Collection

Article Engineering, Mechanical

Energy harvesting from iced-conductor inspired wake galloping

Zhimiao Yan et al.

EXTREME MECHANICS LETTERS (2020)

Add to Collection

Article Energy & Fuels

Wind energy harvesting from a magnetically coupled piezoelectric bimorph cantilever array based on a dynamic magneto-piezo-elastic structure

Yonghyeon Na et al.

APPLIED ENERGY (2020)

Add to Collection

Article Engineering, Mechanical

Design and analysis of a vortex-induced bi-directional piezoelectric energy harvester

Wei-Jiun Su et al.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2020)

Add to Collection

Article Instruments & Instrumentation

Piezoelectric wind energy harvesting subjected to the conjunction of vortex-induced vibration and galloping: comprehensive parametric study and optimization

Kai Yang et al.

SMART MATERIALS AND STRUCTURES (2020)

Add to Collection

Article Energy & Fuels

Analytical and numerical fluid-structure interaction study of a microscale piezoelectric wind energy harvester

Elham Alaei et al.

WIND ENERGY (2020)

Add to Collection

Article Engineering, Electrical & Electronic

Wind energy harvesting using piezoelectric macro fiber composites based on flutter mode

Jianjun Liu et al.

MICROELECTRONIC ENGINEERING (2020)

Add to Collection

Review Energy & Fuels

The state-of-the-art review on energy harvesting from flow-induced vibrations

Junlei Wang et al.

APPLIED ENERGY (2020)

Add to Collection

Article Physics, Applied

A synergetic hybrid mechanism of piezoelectric and triboelectric for galloping wind energy harvesting

Qiong Wang et al.

APPLIED PHYSICS LETTERS (2020)

Add to Collection

Article Physics, Applied

Piezoelectric wind velocity sensor based on the variation of galloping frequency with drag force

Mayue Shi et al.

APPLIED PHYSICS LETTERS (2020)

Add to Collection

Article Chemistry, Analytical

Experimental Investigation on a Novel Airfoil-Based Piezoelectric Energy Harvester for Aeroelastic Vibration

Xiaobiao Shan et al.

MICROMACHINES (2020)

Add to Collection

Review Chemistry, Multidisciplinary

Additive Manufacturing of Piezoelectric Materials

Cheng Chen et al.

ADVANCED FUNCTIONAL MATERIALS (2020)

Add to Collection

Article Thermodynamics

Piezoelectric galloping energy harvesting enhanced by topological equivalent aerodynamic design

Daoli Zhao et al.

ENERGY CONVERSION AND MANAGEMENT (2020)

Add to Collection

Article Green & Sustainable Science & Technology

Optimizing wind/solar combinations at finer scales to mitigate renewable energy variability in China

Laibao Liu et al.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2020)

Add to Collection

Article Engineering, Aerospace

Constructive Aerodynamic Interference in a Network of Weakly Coupled Flutter-Based Energy Harvesters

Emmanuel Beltramo et al.

AEROSPACE (2020)

Add to Collection

Review Chemistry, Multidisciplinary

Overview of micro/nano-wind energy harvesters and sensors

Xianpeng Fu et al.

NANOSCALE (2020)

Add to Collection

Article Multidisciplinary Sciences

Modeling and Experimental Characterization of a Piezoelectric Energy Harvester with a Wind Concentrator Structure

Jiantao Zhang et al.

ARABIAN JOURNAL FOR SCIENCE AND ENGINEERING (2020)

Add to Collection

Article Computer Science, Information Systems

Study on Wind Energy Harvesting Effect of a Vehicle-Mounted Piezo-Electromagnetic Hybrid Energy Harvester

Xia Li et al.

IEEE ACCESS (2020)

Add to Collection

Article Physics, Applied

A galloping energy harvester with flow attachment

S. Tucker Harvey et al.

APPLIED PHYSICS LETTERS (2019)

Add to Collection

Article Thermodynamics

High-performance piezoelectric wind energy harvester with Y-shaped attachments

Junlei Wang et al.

ENERGY CONVERSION AND MANAGEMENT (2019)

Add to Collection

Article Chemistry, Physical

Determination of the appropriate piezoelectric materials for various types of piezoelectric energy harvesters with high output power

Sun-Woo Kim et al.

NANO ENERGY (2019)

Add to Collection

Article Energy & Fuels

A water-proof magnetically coupled piezoelectric-electromagnetic hybrid wind energy harvester

Lin-Chuan Zhao et al.

APPLIED ENERGY (2019)

Add to Collection

Article Energy & Fuels

Simultaneous wind and solar energy harvesting with inverted flags

Jorge Silva-Leon et al.

APPLIED ENERGY (2019)

Add to Collection

Article Thermodynamics

Efficiency investigation on energy harvesting from airflows in HVAC system based on galloping of isosceles triangle sectioned bluff bodies

Junlei Wang et al.

ENERGY (2019)

Add to Collection

Article Mechanics

A piezoelectric energy harvesting scheme based on stall flutter of airfoil section

Cunyu Bao et al.

EUROPEAN JOURNAL OF MECHANICS B-FLUIDS (2019)

Add to Collection

Article Engineering, Civil

Energy Harvesting Performance of a Wing Panel for Aeroelastic Vibration

Xiaobiao Shan et al.

INTERNATIONAL JOURNAL OF STRUCTURAL STABILITY AND DYNAMICS (2019)

Add to Collection

Article Acoustics

The effects of structural and aerodynamic nonlinearities on the energy harvesting from airfoil stall-induced oscillations

Carlos R. dos Santos et al.

JOURNAL OF VIBRATION AND CONTROL (2019)

Add to Collection

Article Green & Sustainable Science & Technology

Airfoil-based cantilevered polyvinylidene fluoride layer generator for translating amplified air-flow energy

Tinghai Cheng et al.

RENEWABLE ENERGY (2019)

Add to Collection

Article Instruments & Instrumentation

Design of a disk-swing driven piezoelectric energy harvester for slow rotary system application

Saman Nezami et al.

SMART MATERIALS AND STRUCTURES (2019)

Add to Collection

Review Energy & Fuels

Geothermal power generation in China: Status and prospects

Lei Zhang et al.

ENERGY SCIENCE & ENGINEERING (2019)

Add to Collection

Article Acoustics

Vehicle interior noise active control based on piezoelectric ceramic materials and improved fuzzy control algorithm

H. Guo et al.

APPLIED ACOUSTICS (2019)

Add to Collection

Article Physics, Applied

Scavenging wind energy by a dynamic-stable flutter energy harvester with rectangular wing

Zhiyong Zhou et al.

APPLIED PHYSICS LETTERS (2019)

Add to Collection

Article Materials Science, Multidisciplinary

On the origin of contact-electrification

Zhong Lin Wang et al.

MATERIALS TODAY (2019)

Add to Collection

Review Instruments & Instrumentation

A review of principles of MEMS pressure sensing with its aerospace applications

Yaser Javed et al.

SENSOR REVIEW (2019)

Add to Collection

Article Thermodynamics

Fork-shaped bluff body for enhancing the performance of galloping-based wind energy harvester

Feng-Rui Liu et al.

ENERGY (2019)

Add to Collection

Review Engineering, Electrical & Electronic

Design and applications of MEMS flow sensors: A review

Fatemeh Ejeian et al.

SENSORS AND ACTUATORS A-PHYSICAL (2019)

Add to Collection

Review Green & Sustainable Science & Technology

A comprehensive review of ocean wave energy research and development in China

Shouqiang Qiu et al.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2019)

Add to Collection

Article Engineering, Electrical & Electronic

Comparisons of bioinspired piezoelectric wind energy harvesters with different layout of stiffeners based on leaf venation prototypes

Weiyuan Wang et al.

SENSORS AND ACTUATORS A-PHYSICAL (2019)

Add to Collection

Article Thermodynamics

Experimental investigation of aerodynamic energy harvester with different interference cylinder cross-sections

L. B. Zhang et al.

ENERGY (2019)

Add to Collection

Article Thermodynamics

Magnetic coupling and flextensional amplification mechanisms for high-robustness ambient wind energy harvesting

Lin-Chuan Zhao et al.

ENERGY CONVERSION AND MANAGEMENT (2019)

Add to Collection

Article Engineering, Mechanical

A novel design for an adaptive aeroelastic energy harvesting system: flutter and power analysis

Milad Hafezi et al.

JOURNAL OF THE BRAZILIAN SOCIETY OF MECHANICAL SCIENCES AND ENGINEERING (2019)

Add to Collection

Article Instruments & Instrumentation

Nonlinear magnetic-coupled flutter-based aeroelastic energy harvester: modeling, simulation and experimental verification

Kui Li et al.

SMART MATERIALS AND STRUCTURES (2019)

Add to Collection

Article Energy & Fuels

Experimental investigation on the efficiency of circular cylinder-based wind energy harvester with different rod-shaped attachments

Gang Hu et al.

APPLIED ENERGY (2018)

Add to Collection

Article Physics, Applied

Y-type three-blade bluff body for wind energy harvesting

Feng-Rui Liu et al.

APPLIED PHYSICS LETTERS (2018)

Add to Collection

Article Thermodynamics

Experimental validation of a novel piezoelectric energy harvesting system employing wake galloping phenomenon for a broad wind spectrum

Muhammad Usman et al.

ENERGY (2018)

Add to Collection

Review Materials Science, Multidisciplinary

Piezoelectric properties in two-dimensional materials: Simulations and experiments

Ronan Hinchet et al.

MATERIALS TODAY (2018)

Add to Collection

Article Engineering, Multidisciplinary

A new methodology for optimal rail track condition measurement using acceleration signals

C. Chellaswamy et al.

MEASUREMENT SCIENCE AND TECHNOLOGY (2018)

Add to Collection

Review Green & Sustainable Science & Technology

Hydropower development situation and prospects in China

Xiao-zhu Li et al.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2018)

Add to Collection

Article Engineering, Electrical & Electronic

A bioinspired structure modification of piezoelectric wind energy harvester based on the prototype of leaf veins

Weiyuan Wang et al.

SENSORS AND ACTUATORS A-PHYSICAL (2018)

Add to Collection

Article Energy & Fuels

Role of the galloping force and moment of inertia of inclined square cylinders on the performance of hybrid galloping energy harvesters

U. Javed et al.

APPLIED ENERGY (2018)

Add to Collection

Article Thermodynamics

Hybrid vibration and wind energy harvesting using combined piezoelectric and electromagnetic conversion for bridge health monitoring applications

Muhammad Iqbal et al.

ENERGY CONVERSION AND MANAGEMENT (2018)

Add to Collection

Article Nanoscience & Nanotechnology

Wind energy harvesting using jet-edge flow oscillations

Xiaoqian Chen et al.

AIP ADVANCES (2018)

Add to Collection

Article Physics, Multidisciplinary

A High Efficient Piezoelectric Windmill using Magnetic Force for Low Wind Speed in Wireless Sensor Networks

Chan Ho Yang et al.

JOURNAL OF THE KOREAN PHYSICAL SOCIETY (2018)

Add to Collection

Review Materials Science, Multidisciplinary

An overview of lead-free piezoelectric materials and devices

Huige Wei et al.

JOURNAL OF MATERIALS CHEMISTRY C (2018)

Add to Collection

Article Materials Science, Multidisciplinary

Fan-structure wind energy harvester using circular array of polyvinylidene fluoride cantilevers

Fengxian Bai et al.

JOURNAL OF INTELLIGENT MATERIAL SYSTEMS AND STRUCTURES (2017)

Add to Collection

Article Engineering, Civil

Energy harvesting from wind by a piezoelectric harvester

J. X. Tao et al.

ENGINEERING STRUCTURES (2017)

Add to Collection

Article Chemistry, Physical

Design and implementation of a new contactless triple piezoelectrics wind energy harvester

Erol Kurt et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2017)

Add to Collection

Article Engineering, Electrical & Electronic

Quick self-start and minimum power-loss management circuit for impact-type micro wind piezoelectric energy harvesters

Nan Chen et al.

SENSORS AND ACTUATORS A-PHYSICAL (2017)

Add to Collection

Article Engineering, Civil

On the modeling methods of small-scale piezoelectric wind energy harvesting

Liya Zhao et al.

SMART STRUCTURES AND SYSTEMS (2017)

Add to Collection

Review Engineering, Mechanical

Development and application of high-end aerospace MEMS

Weizheng Yuan

FRONTIERS OF MECHANICAL ENGINEERING (2017)

Add to Collection

Article Physics, Applied

Performance of a circular cylinder piezoelectric wind energy harvester fitted with a splitter plate

Jie Song et al.

APPLIED PHYSICS LETTERS (2017)

Add to Collection

Article Energy & Fuels

Harvesting ambient wind energy with an inverted piezoelectric flag

Santiago Orrego et al.

APPLIED ENERGY (2017)

Add to Collection

Article Engineering, Ocean

An octo-generator for energy harvesting based on the piezoelectric effect

N. V. Viet et al.

APPLIED OCEAN RESEARCH (2017)

Add to Collection

Article Physics, Applied

Orientation of bluff body for designing efficient energy harvesters from vortex-induced vibrations

H. L. Dai et al.

APPLIED PHYSICS LETTERS (2016)

Add to Collection

Article Physics, Applied

Aerodynamic modification to a circular cylinder to enhance the piezoelectric wind energy harvesting

Gang Hu et al.

APPLIED PHYSICS LETTERS (2016)

Add to Collection

Review Green & Sustainable Science & Technology

Solar-wind hybrid renewable energy system: A review

Vikas Khare et al.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2016)

Add to Collection

Article Green & Sustainable Science & Technology

Study on a piezo-windmill for energy harvesting

Junwu Kan et al.

RENEWABLE ENERGY (2016)

Add to Collection

Article Engineering, Electrical & Electronic

Thermal energy harvesting by piezoelectric PVDF polymer coupled with shape memory alloy

B. Gusarov et al.

SENSORS AND ACTUATORS A-PHYSICAL (2016)

Add to Collection

Article Engineering, Electrical & Electronic

Experimental investigation of performance reliability of macro fiber composite for piezoelectric energy harvesting applications

Deepesh Upadrashta et al.

SENSORS AND ACTUATORS A-PHYSICAL (2016)

Add to Collection

Article Instruments & Instrumentation

A cm scale electret-based electrostatic wind turbine for low-speed energy harvesting applications

M. Perez et al.

SMART MATERIALS AND STRUCTURES (2016)

Add to Collection

Article Physics, Applied

A miniaturized piezoelectric turbine with self-regulation for increased air speed range

Hailing Fu et al.

APPLIED PHYSICS LETTERS (2015)

Add to Collection

Review Computer Science, Hardware & Architecture

Advanced MEMS-based technologies and displays

Ji Ma

DISPLAYS (2015)

Add to Collection

Article Engineering, Electrical & Electronic

Macro fiber composite-based low frequency vibration energy harvester

Suna Ju et al.

SENSORS AND ACTUATORS A-PHYSICAL (2015)

Add to Collection

Article Engineering, Mechanical

Dual-branch reed for resonant cavity wind energy harvester with enhanced performances

Xiao Wang et al.

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE (2015)

Add to Collection

Article Physics, Applied

Rotational piezoelectric wind energy harvesting using impact-induced resonance

Ying Yang et al.

APPLIED PHYSICS LETTERS (2014)

Add to Collection

Article Chemistry, Physical

Triboelectric nanogenerators as new energy technology and self-powered sensors - Principles, problems and perspectives

Zhong Lin Wang

FARADAY DISCUSSIONS (2014)

Add to Collection

Article Engineering, Electrical & Electronic

A Novel Method of Wind Energy Generation-The Electrostatic Wind Energy Converter

Dhiradj Djairam et al.

IEEE ELECTRICAL INSULATION MAGAZINE (2014)

Add to Collection

Article Materials Science, Multidisciplinary

Performance analysis of galloping-based piezoaeroelastic energy harvesters with different cross-section geometries

Abdessattar Abdelkefi et al.

JOURNAL OF INTELLIGENT MATERIAL SYSTEMS AND STRUCTURES (2014)

Add to Collection

Article Materials Science, Ceramics

Material properties of bismuth layered ferroelectrics and lead zirconate titanate piezoelectric ceramics

Mitsuhiro Okayasu et al.

CERAMICS INTERNATIONAL (2013)

Add to Collection

Article Automation & Control Systems

Experimental Validation for a Multifunctional Wing Spar With Sensing, Harvesting, and Gust Alleviation Capabilities

Ya Wang et al.

IEEE-ASME TRANSACTIONS ON MECHATRONICS (2013)

Add to Collection

Article Instruments & Instrumentation

Modeling and nonlinear analysis of piezoelectric energy harvesting from transverse galloping

Abdessattar Abdelkefi et al.

SMART MATERIALS AND STRUCTURES (2013)

Add to Collection

Article Engineering, Electrical & Electronic

A new S-shaped MEMS PZT cantilever for energy harvesting from low frequency vibrations below 30 Hz

Huicong Liu et al.

MICROSYSTEM TECHNOLOGIES-MICRO-AND NANOSYSTEMS-INFORMATION STORAGE AND PROCESSING SYSTEMS (2012)

Add to Collection

Article Instruments & Instrumentation

Artificial piezoelectric grass for energy harvesting from turbulence-induced vibration

J. D. Hobeck et al.

SMART MATERIALS AND STRUCTURES (2012)

Add to Collection

Article Instruments & Instrumentation

An investigation of energy harvesting from renewable sources with PVDF and PZT

D. Vatansever et al.

SMART MATERIALS AND STRUCTURES (2011)

Add to Collection

Article Instruments & Instrumentation

Aeroelastic flutter energy harvester design: the sensitivity of the driving instability to system parameters

Matthew Bryant et al.

SMART MATERIALS AND STRUCTURES (2011)

Add to Collection

Article Physics, Applied

A scalable concept for micropower generation using flow-induced self-excited oscillations

D. St Clair et al.

APPLIED PHYSICS LETTERS (2010)

Add to Collection

Article Physics, Applied

A T-shaped piezoelectric cantilever for fluid energy harvesting

Soon-Duck Kwon

APPLIED PHYSICS LETTERS (2010)

Add to Collection

Article Engineering, Electrical & Electronic

Micro-Fabricated Electromagnetic Power Generator to Scavenge Low Ambient Vibration

Jong Cheol Park et al.

IEEE TRANSACTIONS ON MAGNETICS (2010)

Add to Collection

Article Energy & Fuels

Development of a tree-shaped wind power system using piezoelectric materials

S. J. Oh et al.

INTERNATIONAL JOURNAL OF ENERGY RESEARCH (2010)

Add to Collection

Review Green & Sustainable Science & Technology

Wind energy status in renewable electrical energy production in Turkey

Kamil Kaygusuz

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2010)

Add to Collection

Article Engineering, Aerospace

Use of a piezo-composite generating element for harvesting wind energy in an urban region

Cam Minh Tri Tien et al.

AIRCRAFT ENGINEERING AND AEROSPACE TECHNOLOGY (2010)

Add to Collection

Article Engineering, Electrical & Electronic

Micromachined PZT cantilever based on SOI structure for low frequency vibration energy harvesting

Dongna Shen et al.

SENSORS AND ACTUATORS A-PHYSICAL (2009)

Add to Collection

Article Engineering, Electrical & Electronic

An electromagnetic micro power generator for wideband environmental vibrations

Ibrahim Sari et al.

SENSORS AND ACTUATORS A-PHYSICAL (2008)

Add to Collection

Review Engineering, Multidisciplinary

Energy harvesting vibration sources for microsystems applications

S. P. Beeby et al.

MEASUREMENT SCIENCE AND TECHNOLOGY (2006)

Add to Collection

Article Physics, Applied

Modeling of electric energy harvesting using piezoelectric windmill

S Priya

APPLIED PHYSICS LETTERS (2005)

Add to Collection

Article Physics, Applied

Piezoelectric windmill: A novel solution to remote sensing

S Priya et al.

JAPANESE JOURNAL OF APPLIED PHYSICS PART 2-LETTERS & EXPRESS LETTERS (2005)

Add to Collection

Article Computer Science, Information Systems

A study of low level vibrations as a power source for wireless sensor nodes

S Roundy et al.

COMPUTER COMMUNICATIONS (2003)

Add to Collection

© Peeref 2019-2024. All rights reserved.