☆ 4.6 Article

Minimum-Time Trajectory Generation for Wheeled Mobile Systems Using Bezier Curves with Constraints on Velocity, Acceleration and Jerk

SENSORS (2023)

Related references

Note: Only part of the references are listed.

Article Automation & Control Systems

Minimum-time velocity profile planning for planar motion considering velocity, acceleration and jerk constraints

Martina Benko Loknar et al.

Summary: This paper presents a computationally efficient velocity profile planning algorithm for wheeled mobile robots in planar motion. The algorithm introduces turning points and ensures compliance with velocity and acceleration constraints. It also modifies the existing velocity profile to satisfy jerk constraints. The proposed algorithm offers a two-step approach and consistent full jerk treatment, and has been compared with a state-of-the-art method, showing low computational burden.

INTERNATIONAL JOURNAL OF CONTROL (2023)

Add to Collection

Article Energy & Fuels

Thorough Review Analysis of Safe Control of Autonomous Vehicles: Path Planning and Navigation Techniques

Sara Abdallaoui et al.

Summary: Mobile robot path planning has undergone significant development, allowing robots to navigate collision-free and find optimal paths by using various algorithms and technologies. These approaches are applicable to different conditions and domains.

ENERGIES (2022)

Add to Collection

Article Computer Science, Artificial Intelligence

A continuous RRT*-based path planning method for non-holonomic mobile robots using B-spline curves

S. A. Eshtehardian et al.

Summary: The paper presents an approach combining RRT* and B-spline for smoothing the path generated by RRT*-based algorithms. The proposed method addresses the kinematic constraints and collision detection issues in robot motion on discrete paths, and is validated in the simulation environment of Webots(R).

JOURNAL OF AMBIENT INTELLIGENCE AND HUMANIZED COMPUTING (2022)

Add to Collection

Article Chemistry, Analytical

Bernstein Polynomial-Based Method for Solving Optimal Trajectory Generation Problems

Calvin Kielas-Jensen et al.

Summary: This paper presents a method for generating trajectories for autonomous system operations using Bernstein polynomials. The method enables efficient evaluation and enforcement of constraints, guaranteeing feasibility and safety of the trajectories in complex environments.

SENSORS (2022)

Add to Collection

Article Chemistry, Multidisciplinary

MARL-Based Dual Reward Model on Segmented Actions for Multiple Mobile Robots in Automated Warehouse Environment

Hyeoksoo Lee et al.

Summary: This paper studies the conditions for operating mobile robots in an automated warehouse and proposes a method to improve sparse reward problems. Through multi-agent reinforcement learning experiments, it is confirmed that the proposed reward model enables learning to start earlier and maintain stable progress. This research helps us further understand the actual operation of mobile robots in an automated warehouse.

APPLIED SCIENCES-BASEL (2022)

Add to Collection

Article Computer Science, Information Systems

Effective Parametrization of Low Order Bezier Motion Primitives for Continuous-Curvature Path-Planning Applications

Saso Blazi et al.

Summary: This paper proposes a new parametrization of motion primitives based on Bezier curves for path-planning applications. The method allows for simple calculation of individual motion primitives while ensuring curve continuity, improving efficiency and convergence in path planning.

ELECTRONICS (2022)

Add to Collection

Article Automation & Control Systems

A Sequential Algorithm for Jerk Limited Speed Planning

Luca Consolini et al.

Summary: This article discusses a sequential algorithm for computing a minimum-time speed profile over a given path under velocity, acceleration, and jerk constraints. The algorithm proposes a feasible direction based on a linearized version of the problem to enhance the performance and robustness of existing NLP solvers. Computational experiments confirm the efficiency of the proposed approach compared to traditional NLP solvers.

IEEE TRANSACTIONS ON AUTOMATION SCIENCE AND ENGINEERING (2022)

Add to Collection

Article Engineering, Industrial

Optimal trajectory planning of industrial robot for improving positional accuracy

Amruta Rout et al.

Summary: This paper aims to improve the performance of industrial robots through the proposed optimal joint trajectory planning method and a new optimization algorithm NSGA-II with ASF. The experimental results demonstrate the effectiveness of the optimization technique for trajectory planning in the joint space of six-axis industrial manipulators.

INDUSTRIAL ROBOT-THE INTERNATIONAL JOURNAL OF ROBOTICS RESEARCH AND APPLICATION (2021)

Add to Collection

Article Computer Science, Artificial Intelligence

An improved PSO algorithm for smooth path planning of mobile robots using continuous high-degree Bezier curve

Baoye Song et al.

Summary: This paper presents a new strategy for planning smooth paths for mobile robots using an improved PSO algorithm and continuous high-degree Bezier curves. The improved PSO algorithm effectively addresses local trapping and premature convergence issues, while experiments confirm the advantages of the new strategy.

APPLIED SOFT COMPUTING (2021)

Add to Collection

Article Engineering, Mechanical

Path planning for autonomous ground vehicles based on quintic trigonometric Bezier curve: Path planning based on quintic trigonometric Bezier curve

Vahide Bulut

Summary: This study proposes a general framework for path planning using quintic trigonometric Bezier curves, allowing for optimization of predefined paths by adjusting shape parameters without changing obstacles. Additionally, it compares the velocity, acceleration, and jerks of different path types.

JOURNAL OF THE BRAZILIAN SOCIETY OF MECHANICAL SCIENCES AND ENGINEERING (2021)

Add to Collection

Article Engineering, Multidisciplinary

Analytical time constant design for jerk-limited acceleration profiles to minimize residual vibration after positioning operation in NC machine tools

Ryuta Sato et al.

Summary: This study develops a novel acceleration and deceleration design method to suppress residual vibration in high-speed positioning of NC machine tools. By appropriately designing the jerk-limited acceleration profile and utilizing an amplitude map to represent relationships between acceleration parameters and vibration amplitude, the proposed method effectively suppresses residual vibration without increasing total positioning time. Measurements and simulations confirm the method's effectiveness in suppressing residual vibration.

PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY (2021)

Add to Collection

Article Automation & Control Systems

A new approach to time-optimal trajectory planning with torque and jerk limits for robot

Jian-wei Ma et al.

Summary: This study introduces a new convex optimization approach for time-optimal trajectory planning that effectively restrains acceleration mutation and addresses torque and jerk limits by reasonably increasing computation time. The proposed method can reduce joint jerk values by over 80% and produce smoother joint torque curves compared to a similar method.

ROBOTICS AND AUTONOMOUS SYSTEMS (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Path Planning Optimization for Driverless Vehicle in Parallel Parking Integrating Radial Basis Function Neural Network

Leiyan Yu et al.

Summary: A novel method is proposed to optimize the path planning for driverless vehicles in parallel parking by training the control points of Bezier curve, ensuring continuous curvature, safety, and curvature constraints. Experimental results demonstrate that the proposed method effectively enhances the ability of vehicles to parallel park in tight parking spaces.

APPLIED SCIENCES-BASEL (2021)

Add to Collection

Article Robotics

A new method on motion planning for mobile robots using jump point search and Bezier curves

Ben Zhang et al.

Summary: This article introduces a novel path planning algorithm based on jump point search and Bezier curves, with an optimized heuristic function in the front end and trajectory generation using Bezier curves and straight lines in the back end. Experimental results demonstrate that the algorithm can achieve optimal trajectory planning for robot navigation.

INTERNATIONAL JOURNAL OF ADVANCED ROBOTIC SYSTEMS (2021)

Add to Collection

Article Robotics

A cubic spline method combing improved particle swarm optimization for robot path planning in dynamic uncertain environment

Wen Li et al.

INTERNATIONAL JOURNAL OF ADVANCED ROBOTIC SYSTEMS (2020)

Add to Collection

Article Chemistry, Analytical

Development of a Hybrid Path Planning Algorithm and a Bio-Inspired Control for an Omni-Wheel Mobile Robot

Changwon Kim et al.

SENSORS (2020)

Add to Collection

Article Robotics

Minimum Time-Minimum Jerk Optimal Traffic Management for AGVs

Marco Frego et al.

IEEE ROBOTICS AND AUTOMATION LETTERS (2020)

Add to Collection

Review Engineering, Mechanical

Jerk within the Context of Science and Engineering-A Systematic Review

Hasti Hayati et al.

VIBRATION (2020)

Add to Collection

Article Computer Science, Information Systems

Intelligent Bezier curve-based path planning model using Chaotic Particle Swarm Optimization algorithm

Alaa Tharwat et al.

CLUSTER COMPUTING-THE JOURNAL OF NETWORKS SOFTWARE TOOLS AND APPLICATIONS (2019)

Add to Collection

Article Robotics

Optimal Time-Complexity Speed Planning for Robot Manipulators

Luca Consolini et al.

IEEE TRANSACTIONS ON ROBOTICS (2019)

Add to Collection

Review Engineering, Multidisciplinary

A review: On path planning strategies for navigation of mobile robot

B. K. Patle et al.

DEFENCE TECHNOLOGY (2019)

Add to Collection

Article Computer Science, Information Systems

Real-Time Motion Planning Approach for Automated Driving in Urban Environments

Antonio Artunedo et al.

IEEE ACCESS (2019)

Add to Collection

Proceedings Paper Automation & Control Systems

Jerk limited planner for real-time applications requiring variable velocity bounds

Marina Raineri et al.

2019 IEEE 15TH INTERNATIONAL CONFERENCE ON AUTOMATION SCIENCE AND ENGINEERING (CASE) (2019)

Add to Collection

Article Robotics

Time-Optimal Path Tracking for Jerk Controlled Robots

Alessandro Palleschi et al.

IEEE ROBOTICS AND AUTOMATION LETTERS (2019)

Add to Collection

Article Automation & Control Systems

Smooth path and velocity planning under 3D path constraints for car-like vehicles

He Zhang et al.

ROBOTICS AND AUTONOMOUS SYSTEMS (2018)

Add to Collection

Review Chemistry, Analytical

Path Smoothing Techniques in Robot Navigation: State-of-the-Art, Current and Future Challenges

Abhijeet Ravankar et al.

SENSORS (2018)

Add to Collection

Article Multidisciplinary Sciences

Path Planning for the Mobile Robot: A Review

Han-ye Zhang et al.

SYMMETRY-BASEL (2018)

Add to Collection

Article Automation & Control Systems

Time-Optimal Trajectory Planning Based on Dynamics for Differential-Wheeled Mobile Robots With a Geometric Corridor

Yunjeong Kim et al.

IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS (2017)

Add to Collection

Article Mechanics

JERK BY AXES IN MOTION ALONG A SPACE CURVE

Michael Tsirlin

JOURNAL OF THEORETICAL AND APPLIED MECHANICS (2017)

Add to Collection

Article Engineering, Multidisciplinary

Derivation of the Mathematical Approach to the Radial Pump's Meridional Channel Design Based on the Controlment of the Medial Axis

Yeming Lu et al.

MATHEMATICAL PROBLEMS IN ENGINEERING (2017)

Add to Collection

Article Engineering, Electrical & Electronic

On-Road Path Generation and Control for Waypoints Tracking

Chang Mook Kang et al.

IEEE INTELLIGENT TRANSPORTATION SYSTEMS MAGAZINE (2017)

Add to Collection

Article Computer Science, Artificial Intelligence

Spatial Model Predictive Control for Smooth and Accurate Steering of an Autonomous Truck

Pedro F. Lima et al.

IEEE TRANSACTIONS ON INTELLIGENT VEHICLES (2017)

Add to Collection

Article Computer Science, Interdisciplinary Applications

Real-time smooth trajectory generation for nonholonomic mobile robots using Bezier curves

Kenneth Renny Simba et al.

ROBOTICS AND COMPUTER-INTEGRATED MANUFACTURING (2016)

Add to Collection

Article Robotics

SHP: Smooth Hypocycloidal Paths with Collision-free and Decoupled Multi-robot Path Planning

Abhijeet Ravankar et al.

INTERNATIONAL JOURNAL OF ADVANCED ROBOTIC SYSTEMS (2016)

Add to Collection

Proceedings Paper Transportation Science & Technology

Clothoid-Based Speed Profiler and Control for Autonomous Driving

Pedro F. Lima et al.

2015 IEEE 18TH INTERNATIONAL CONFERENCE ON INTELLIGENT TRANSPORTATION SYSTEMS (2015)

Add to Collection

Article Automation & Control Systems

Time optimal path planning considering acceleration limits

M Lepetic et al.

ROBOTICS AND AUTONOMOUS SYSTEMS (2003)

Add to Collection

© Peeref 2019-2024. All rights reserved.