Related references
Note: Only part of the references are listed.
Article
Automation & Control Systems
Goncalo Collares Pereira et al.
Summary: This work proposes a path tracking controller for autonomous vehicles, which ensures closed-loop stability, safety, comfort, and minimal wear of vehicle components. The controller uses a reformulated Reference Aware MPC and stability is proven using Lyapunov techniques. To adapt the controller's response in real-time, a novel nonlinear curvature response model is introduced, estimated online through Kalman filtering. The controller and curvature response model are evaluated through simulations and experiments on a Scania construction truck, demonstrating their advantages over existing state-of-the-art approaches.
CONTROL ENGINEERING PRACTICE
(2023)
Article
Engineering, Civil
Yalin Wu et al.
Summary: This paper proposes an integrated collision avoidance control strategy based on MPC and DNMPC to achieve dynamic path planning and high-precision control by predicting the movement of obstacles within the predictive step length.
IEEE TRANSACTIONS ON INTELLIGENT TRANSPORTATION SYSTEMS
(2022)
Article
Automation & Control Systems
Zejiang Wang et al.
Summary: Traditional automated vehicle path-tracking algorithms that rely on plant models face challenges in obtaining accurate vehicle models due to complex tire-road interaction. Data-driven controllers, such as model-free control (MFC), have gained popularity. However, the control gain tuning of MFC remains a trial-and-error process. This article proposes integrating MFC with extremum-seeking control (ESC) to improve control performance.
IEEE-ASME TRANSACTIONS ON MECHATRONICS
(2022)
Article
Automation & Control Systems
Subhan Khan et al.
Summary: This paper introduces an efficient and robust model predictive control scheme for a small-scale autonomous bulldozer, allowing trajectory tracking in the presence of disturbances. Experimental results demonstrate the superior performance of the proposed control scheme, compared to related techniques, in terms of tracking accuracy.
ROBOTICS AND AUTONOMOUS SYSTEMS
(2022)
Article
Engineering, Marine
Yong Dai et al.
Summary: This paper presents a novel robust fast tube model predictive control scheme for controlling the MIMO underwater vehicle-manipulator system, which combines fast MPC and tube sliding mode control law to achieve effective control.
Article
Automation & Control Systems
Hongbo Gao et al.
Summary: This article presents a trajectory following control solution for the lateral motion of an unmanned vehicle. The proposed solution is based on model predictive lateral control, which ensures both control accuracy and robustness in the presence of nonlinearity, large dynamics, and uncertainties.
IEEE-ASME TRANSACTIONS ON MECHATRONICS
(2022)
Article
Mathematical & Computational Biology
Ata Jahangir Moshayedi et al.
Summary: This study describes the design and simulation of an AGV system, and compares different PID control tuning methods on various paths. The results show that the BAS algorithm is the fastest and PSO performs better overall, with the highest error observed in the 8-shaped path and the lowest error in the circle path.
COMPUTATIONAL INTELLIGENCE AND NEUROSCIENCE
(2022)
Article
Engineering, Mechanical
Chen Ding et al.
Summary: This paper develops output feedback sliding mode control methods for the path-tracking control system of autonomous agricultural vehicles. By introducing coordinate transformation and using second-order robust exact differentiator, the path-tracking control is achieved. Traditional first-order sliding mode control and second-order sliding mode control are employed to improve the precision and transient performance of the path-tracking.
NONLINEAR DYNAMICS
(2022)
Review
Computer Science, Information Systems
Darsh Parekh et al.
Summary: This paper examines various technologies and domains required for building autonomous vehicles and conducts a literature analysis on environment detection, pedestrian detection, path planning, motion control, and vehicle cybersecurity. The study aims to explore and compare different proposed technologies and discusses the importance of public trust and perception in autonomous vehicles. The opportunities and obstacles of autonomous driving technology are also discussed to shed light on future possibilities.
Article
Automation & Control Systems
Behrouz Najjari et al.
Summary: This paper obtains the optimal driving torques of the four wheels in an electric vehicle by minimizing the losses of the four in-wheel motors. It proposes a new constrained active front steering (AFS) system which is analytically designed and integrated with the torque vectoring (TV) system in a decentralized structure. The efficiency and practical implementation of the proposed decentralized control structure are demonstrated through comparative simulation studies.
JOURNAL OF THE FRANKLIN INSTITUTE-ENGINEERING AND APPLIED MATHEMATICS
(2022)
Proceedings Paper
Automation & Control Systems
Chongjun Liu et al.
Summary: This paper proposes a side slip angle estimation method for autonomous vehicles, which optimizes the estimation accuracy by constructing a robust mixed H-infinity and Kalman filter, and ensures robustness when there is uncertainty in the model.
2022 INTERNATIONAL CONFERENCE ON ADVANCED ROBOTICS AND MECHATRONICS (ICARM 2022)
(2022)
Review
Computer Science, Information Systems
Archishman Biswas et al.
Summary: The most well-known research in the field of driverless vehicles is currently focused on connected autonomous vehicles (CAVs), which not only enhance logistics operations but also offer new possibilities for sustainable growth in the industry. This review examines the cyber physical aspect of autonomous vehicles, incorporating cloud-controlled wireless network-based models and unmanned aerial vehicles (UAVs). The study also explores Vehicle-to-Everything (V2X) communication and its impact on lateral control, particularly lane changes, considering social behavior and human driver tendencies.
Article
Computer Science, Artificial Intelligence
Dongpu Cao et al.
Summary: This is the brief report of the first IEEE Distributed/Decentralized Hybrid Workshop on Future Directions of Intelligent Vehicles. The workshop addressed various issues related to intelligent vehicles and potential topics for future research and development.
IEEE TRANSACTIONS ON INTELLIGENT VEHICLES
(2022)
Article
Engineering, Electrical & Electronic
Rui Xiong et al.
Summary: Four-wheel independently driven skid steer robotic vehicles (IDSSRVs) are widely used in various fields. However, due to the limitations of small size and low power consumption, many sensors and high-performance processors cannot be equipped, making path tracking more complex. To address this issue, researchers propose a cascaded NTSM-PID method based on nonsingular terminal sliding mode (NTSM), and design a joint PID controller to reduce the deviation of the NTSM controller. Experimental results demonstrate that this approach significantly reduces tracking error compared to other methods.
IEEE TRANSACTIONS ON INSTRUMENTATION AND MEASUREMENT
(2022)
Article
Automation & Control Systems
Zejiang Wang et al.
Summary: Traditional automated vehicle path-tracking algorithms require accurate plant models, while data-driven controllers have become popular for not relying on predefined plant models. Model-free control (MFC) offers a straightforward solution for ground vehicle path tracking, but its control gain tuning remains a challenge.
IEEE-ASME TRANSACTIONS ON MECHATRONICS
(2022)
Article
Automation & Control Systems
Mincheol Park et al.
Summary: This study develops an autonomous vehicle control method for performing drift maneuvers, increasing safety in extreme conditions. The method includes deriving drift equilibrium states and designing a feedback controller, validated through simulations and experiments on a 1:10 scale car platform.
INTERNATIONAL JOURNAL OF CONTROL AUTOMATION AND SYSTEMS
(2021)
Article
Automation & Control Systems
Nishant Chowdhri et al.
Summary: This work introduces a Nonlinear Model Predictive Control (NMPC) scheme for evasive maneuvers and preventing rear-end collisions by utilizing steering and braking actions simultaneously. The controller incorporates constraints for optimal tire force and brake torque distribution, and the performance of the proposed NMPC design is compared with two classical MPC designs using simulation. Different single-lane change maneuvers were tested to evaluate controller behavior under various conditions such as lateral wind disturbances and road friction variation.
CONTROL ENGINEERING PRACTICE
(2021)
Article
Engineering, Mechanical
Yue Jiang et al.
Summary: This paper investigates the heading tracking problem of 6WID/4WIS UGV under uncertainties by proposing an improved MFAC scheme and a torque distribution method based on PSO algorithm. The effectiveness of the control strategy is verified through simulation results.
MECHANICAL SYSTEMS AND SIGNAL PROCESSING
(2021)
Article
Engineering, Mechanical
Joonwoo Ahn et al.
Summary: This paper discusses the importance of path tracking in the navigation of self-driving cars, proposes a new heuristic method for selecting a look-ahead point, and validates the effectiveness of this method through testing.
INTERNATIONAL JOURNAL OF AUTOMOTIVE TECHNOLOGY
(2021)
Review
Engineering, Electrical & Electronic
Qiping Chen et al.
Summary: Environmental perception technology is crucial for the safety of driverless vehicles, but it is facing new challenges in the new era. This review paper summarizes the advantages, disadvantages, and applicable occasions of commonly used sensing methods, and discusses the new challenges in technology, external environment, and applications. Additionally, it highlights the future development trends and efforts in environmental perception technology.
SENSORS AND ACTUATORS A-PHYSICAL
(2021)
Article
Computer Science, Interdisciplinary Applications
Te Chen et al.
Summary: This study focuses on the trajectory tracking control problem of steer-by-wire autonomous ground vehicles in the event of complete failure of the vehicle steering motor. By analyzing the mechanical transmission mechanism and designing controllers, the study successfully demonstrates the use of differential steering for vehicle turning in emergencies, and proposes an observer design method to estimate the actual vehicle steering angle.
SIMULATION MODELLING PRACTICE AND THEORY
(2021)
Article
Engineering, Mechanical
Yucheng Zhu et al.
Summary: This paper proposes two chattering-free discrete-time sliding mode (CDSM) AFS controllers for electric vehicles, which estimate the sideslip angle and reduce disturbance estimation error by imposing a first-order disturbance difference. A generalized proportional integral observer (GPIO) is constructed to enhance control accuracy, and a new composite CDSM controller is obtained with the aid of GPIO to improve control performance. The feasibility and effectiveness of the proposed methods are verified through simulations.
NONLINEAR DYNAMICS
(2021)
Article
Engineering, Electrical & Electronic
Camilo Andres Manrique-Escobar et al.
Summary: In this study, a general closed-chain kinematic model for two-wheeled vehicles is developed, suitable for describing the complex geometry of bicycle and motorcycle motion. Through a comparative analysis of two methods for formulating wheel-road contact constraints and a study of the geometry of contact between the front wheel and the ground, a detailed numerical analysis of system kinematics is conducted.
Article
Thermodynamics
HaiDong Wu et al.
Summary: This study investigates the longitudinal and lateral motion control of a four-wheel independent drive intelligent vehicle and designs a hierarchical controller, with MPC and SMC algorithms for control on the upper layer and a control distributor on the lower layer. By using the UniTire model and numerical partial derivatives, the adaptability and tracking accuracy of the control algorithms are improved, considering road conditions and actuator constraints. Experimental comparisons were conducted on a co-simulation platform in the CarSim/Simulink environment.
ADVANCES IN MECHANICAL ENGINEERING
(2021)
Proceedings Paper
Automation & Control Systems
Dimitrios Kapsalis et al.
Summary: This paper presents a novel automatic lateral control architecture for autonomous vehicle navigation systems, combining LPV control theory and the Pure-Pursuit algorithm to ensure stability and performance at varying speeds, while considering comfort and safety. The synthesized controller based on reduced polytopic LPV model has shown promising results in simulations and real-world testing on an automated electric Renault Zoe test track.
Article
Metallurgy & Metallurgical Engineering
Chen Shu-ping et al.
JOURNAL OF CENTRAL SOUTH UNIVERSITY
(2020)
Proceedings Paper
Automation & Control Systems
Yusuke Igarashi et al.
2020 AMERICAN CONTROL CONFERENCE (ACC)
(2020)
Article
Computer Science, Information Systems
Qiangqiang Yao et al.
Article
Computer Science, Artificial Intelligence
Sara Mata et al.
IEEE TRANSACTIONS ON INTELLIGENT VEHICLES
(2019)
Article
Automation & Control Systems
Mehdi Hosseinzadeh et al.
SYSTEMS & CONTROL LETTERS
(2015)
