☆ 4.7 Article

Role of Rock Sections in Intermittent Joints in Controlling Rock Mass Strength and Failure Modes

ROCK MECHANICS AND ROCK ENGINEERING (2023)

Related references

Note: Only part of the references are listed.

Article Engineering, Geological

Evaluation of Processing Parameters in High-Speed Digital Image Correlation for Strain Measurement in Rock Testing

Fang Xie et al.

Summary: High-speed digital image correlation (DIC) is a powerful tool for measuring transient deformation of rocks. This study evaluates the effect of six processing parameters on the accuracy of DIC-measured strain in a dynamic compression test on sandstone. The study also assesses the quality of strain field obtained with different processing parameters.

ROCK MECHANICS AND ROCK ENGINEERING (2022)

Add to Collection

Article Engineering, Mechanical

Experimental research on the mechanical and acoustic emission properties of sandstone tensile failure

Hong Lv et al.

Summary: Bedding planes have significant influences on the mechanical properties of layered rocks. The increase in dip angle of bedding planes affects the strength and failure mode of layered sandstone. The acoustic emission (AE) characteristics show consistency in different failure modes. Multi-block cyclic loading increases the failure strength and damage ratio of rocks with bedding planes.

THEORETICAL AND APPLIED FRACTURE MECHANICS (2022)

Add to Collection

Article Engineering, Mechanical

Acoustic emission and failure characteristics of cracked rock under freezing-thawing and shearing

Shengwen Zhang et al.

Summary: This study investigates the effects of freeze-thaw cycles and crack inclination angle on the shear characteristics of rocks. Through F-T tests and direct shear tests, the characteristics of AE signals and shear deformation failures at each stage of the shearing process were analyzed using AE technology and DIC technology. The findings indicate that shear properties deteriorate mainly within the first 10 cycles, and the damage degree of cracked samples varies with different crack inclination angles.

THEORETICAL AND APPLIED FRACTURE MECHANICS (2022)

Add to Collection

Article Engineering, Geological

The role of prior creep duration on the acoustic emission characteristics of rock salt under cyclic loading

Kai Zhao et al.

Summary: This study investigates the acoustic emission behavior of rock salt under combined creep and fatigue. The results show that the acoustic emission counts gradually increase during loading and exist sporadically in the prior creep stage and frequently in the subsequent cyclic loading phase. The peak frequency exhibits a zonal distribution and a longer prior creep duration leads to a wider frequency distribution range and a higher average amplitude. According to the analysis, tensile cracks constitute the majority of the total cracks and the prior creep duration reduces the shear crack propagation.

INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES (2022)

Add to Collection

Article Computer Science, Information Systems

Triple-Sigmoid Activation Function for Deep Open-Set Recognition

Dinh Tuan Tran et al.

Summary: Traditional machine learning models perform well only under the assumption of a closed set, but real-world data may not belong to finite sets. To address this issue, we propose a simple activation function called Triple-Sigmoid, which enables models to recognize outliers. Experimental results demonstrate that Triple-Sigmoid not only retains performance in closed-set settings, but also significantly improves performance in open-set configurations.

IEEE ACCESS (2022)

Add to Collection

Article Engineering, Mechanical

Experimental investigation of fatigue crack propagation in interbedded marble under multilevel cyclic uniaxial compressive loads

Yu Wang et al.

Summary: Multilevel cyclic loading-unloading uniaxial compressive testing, along with real-time acoustic emission monitoring and post-test computed tomography scanning, was used to study the anisotropic cracking propagation and crack classification in interbedded marble. The results show that fatigue strength and lifetime initially decrease and then increase with interbed orientation, reaching a minimum at 30 degrees. The distribution of RA and AF values is strongly influenced by the rock structure, especially the interbeds. Additionally, the CT imaging reveals the differences in cracking mode and the structurally dependent cracking propagation pattern.

FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES (2021)

Add to Collection

Article Engineering, Geological

The Reasonable Range Limit of the Shape Parameter in the Weibull Distribution for Describing the Brittle Failure Behavior of Rocks

Baicun Yang et al.

ROCK MECHANICS AND ROCK ENGINEERING (2021)

Add to Collection

Article Geosciences, Multidisciplinary

Cascade effect of rock bridge failure in planar rock slides: numerical test with a distinct element code

Adeline Delonca et al.

Summary: The study investigates the failure mechanism of rock bridges along inclined joints, highlighting the stable and unstable propagation processes of rock bridge failures and identifying the critical positions of rock bridges at different dip angles. Numerical modeling using the distinct element method and experimental observations contribute to a better understanding of rock slope movements and slope stability assessments.

NATURAL HAZARDS AND EARTH SYSTEM SCIENCES (2021)

Add to Collection

Article Mechanics

Experimental study of the mechanical, energy conversion and frictional heating characteristics of locking sections

Ke Zhang et al.

ENGINEERING FRACTURE MECHANICS (2020)

Add to Collection

Article Engineering, Geological

Effects of filling fluid type and composition and joint orientation on acoustic wave propagation across individual fluid-filled rock joints

Hui Yang et al.

INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES (2020)

Add to Collection

Article Engineering, Civil

Nonlinear shear constitutive model for peak shear-type joints based on improved Harris damage function

Shijie Xie et al.

ARCHIVES OF CIVIL AND MECHANICAL ENGINEERING (2020)

Add to Collection

Article Computer Science, Interdisciplinary Applications

Modeling the entire progressive failure process of rock slopes using a strength-based criterion

Yongtao Yang et al.

COMPUTERS AND GEOTECHNICS (2020)

Add to Collection

Article Environmental Sciences

Comparative study on three-dimensional statistical damage constitutive modified model of rock based on power function and Weibull distribution

Song Chen et al.

ENVIRONMENTAL EARTH SCIENCES (2018)

Add to Collection

Article Engineering, Geological

3D Particle-Based DEM Investigation into the Shear Behaviour of Incipient Rock Joints with Various Geometries of Rock Bridges

J. Shang et al.

ROCK MECHANICS AND ROCK ENGINEERING (2018)

Add to Collection

Article Engineering, Geological

Responses of jointed rock masses subjected to impact loading

Shabnam Aziznejad et al.

JOURNAL OF ROCK MECHANICS AND GEOTECHNICAL ENGINEERING (2018)

Add to Collection

Article Multidisciplinary Sciences

A Study on the Mechanical Behavior and Statistical Damage Constitutive Model of Sandstone

Junbao Wang et al.

ARABIAN JOURNAL FOR SCIENCE AND ENGINEERING (2018)

Add to Collection

Article Computer Science, Interdisciplinary Applications

Rigid block based lower bound limit analysis method for stability analysis of fractured rock mass considering rock bridge effects

Jianfeng Zhou et al.

COMPUTERS AND GEOTECHNICS (2017)

Add to Collection

Article Engineering, Geological

Damage constitutive model based on energy dissipation for intact rock subjected to cyclic loading

X. S. Liu et al.

INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES (2016)

Add to Collection

Article Engineering, Geological

An Experimental and Numerical Study on Mechanical Behavior of Ubiquitous-Joint Brittle Rock-Like Specimens Under Uniaxial Compression

Ri-hong Cao et al.

ROCK MECHANICS AND ROCK ENGINEERING (2016)

Add to Collection

Article Mechanics

Investigation of the rate dependence of fracture propagation in rocks using digital image correlation (DIC) method

G. Gao et al.

ENGINEERING FRACTURE MECHANICS (2015)

Add to Collection

Article Engineering, Geological

Evolution of Rock Cracks Under Unloading Condition

R. Q. Huang et al.

ROCK MECHANICS AND ROCK ENGINEERING (2014)

Add to Collection

Article Construction & Building Technology

Crack classification in concrete based on acoustic emission

Kentaro Ohno et al.

CONSTRUCTION AND BUILDING MATERIALS (2010)

Add to Collection

Article Engineering, Geological

A constitutive model for rock interfaces and joints

JG Wang et al.

INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES (2003)

Add to Collection

© Peeref 2019-2024. All rights reserved.