☆ 4.7 Article

A parallel machining robot and its control method for high-performance machining of curved parts

ROBOTICS AND COMPUTER-INTEGRATED MANUFACTURING (2023)

Related references

Note: Only part of the references are listed.

Article Automation & Control Systems

Synchronous feedrate scheduling for the dual-robot machining of complex surface parts with varying wall thickness

Yuwen Sun et al.

Summary: This paper presents a synchronous feedrate scheduling strategy of dual robots for the mirror machining of complex surface parts with varying wall thickness. By establishing the synchronous mapping relationship between toolpaths and building a time-optimal synchronous feedrate scheduling model, the synchronous movement of two cutters can be guaranteed. Linear programming algorithm is used to achieve the exact expression of feedrate profiles for accelerating the solution of the nonlinear model. Experimental results validate the effectiveness of the proposed method and its potential in accurate synchronization of dual robots.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2022)

Add to Collection

Article Computer Science, Interdisciplinary Applications

Contour error-based optimization of the end-effector pose of a 6 degree-of-freedom serial robot in milling operation

Junzhe Lin et al.

Summary: This paper presents a method to optimize the pose of a milling robot to improve machining accuracy. By considering cutting force variances and contour errors as optimization indexes, the proposed method successfully enhances the form accuracy of robotic milling tasks.

ROBOTICS AND COMPUTER-INTEGRATED MANUFACTURING (2022)

Add to Collection

Article Computer Science, Interdisciplinary Applications

Prediction of pose-dependent modal properties and stability limits in robotic ball-end milling

Ruoqi Wang et al.

Summary: This paper investigates the stability prediction of robotic milling for non-metallic materials and proposes an effective prediction model considering variable modal properties. The proposed method is validated through cutting experiments on an industrial robot.

ROBOTICS AND COMPUTER-INTEGRATED MANUFACTURING (2022)

Add to Collection

Article Computer Science, Interdisciplinary Applications

Type synthesis, unified kinematic analysis and prototype validation of a family of Exechon inspired parallel mechanisms for 5-axis hybrid kinematic machine tools

Tengfei Tang et al.

Summary: A family of one translational two rotational over-constrained Exechon inspired parallel mechanisms is synthesized through screw theory, and further comparatively analyzed in terms of inverse kinematics, singularity occurrence, and reachable workspace. A preferred configuration is selected based on kinematic evaluations, and a laboratory prototype is fabricated and experimentally tested to verify the feasibility of the type synthesis and the correctness of the kinematic analyses. By integrating the selected parallel mechanism with a sliding gantry, a novel hybrid kinematic machine tool is developed to perform 5-axis machining tasks, demonstrating the potential for constructing 5-axis serial-parallel hybrid machining devices.

ROBOTICS AND COMPUTER-INTEGRATED MANUFACTURING (2021)

Add to Collection

Article Computer Science, Interdisciplinary Applications

Iso-scallop tool path planning for triangular mesh surfaces in multi-axis machining

Fusheng Liang et al.

Summary: This study proposes an isoscallop tool path planning method for triangular mesh surfaces, which involves constructing a normalized geodesic distance field to determine the shortest geodesic distance and performing a normalization process to meet the scallop height requirement, enhancing computational efficiency and path smoothness by adaptive refinement. The method is organized recursively and terminates when no new paths are generated, with simulations and experiments conducted to validate its effectiveness and superiority.

ROBOTICS AND COMPUTER-INTEGRATED MANUFACTURING (2021)

Add to Collection

Article Computer Science, Interdisciplinary Applications

Accuracy analysis in mobile robot machining of large-scale workpiece

Xingwei Zhao et al.

Summary: This paper focuses on the accuracy analysis in mobile robot machining, defining a tool center point (TCP) error index to evaluate machining error. The study enumerates different error sources affecting TCP error index and proposes a theoretical accuracy analysis to eliminate it. Results show that the force-controlled grinding head can compensate TCP error effectively, reducing it below 40mm during mobile robot machining.

ROBOTICS AND COMPUTER-INTEGRATED MANUFACTURING (2021)

Add to Collection

Article Computer Science, Interdisciplinary Applications

An approach to predict lower-order dynamic behaviors of a 5-DOF hybrid robot using a minimum set of generalized coordinates

Long Wu et al.

Summary: This paper presents an effective semi-analytical approach for predicting lower-order dynamics of a five degrees of-freedom hybrid robot named TriMule. The method formulates the governing equations of motion of limbs within the parallel mechanism by finite element analysis and reduces them to super-element models, leading to the establishment of the dynamic model of the entire system by merging the models of the parallel mechanism and wrist. The computational results demonstrate good agreement with those obtained by a full order FE model and experimental modal tests.

ROBOTICS AND COMPUTER-INTEGRATED MANUFACTURING (2021)

Add to Collection

Article Computer Science, Interdisciplinary Applications

Hybrid active/passive force control strategy for grinding marks suppression and profile accuracy enhancement in robotic belt grinding of turbine blade

Xiaohu Xu et al.

Summary: This paper introduces an active force control method to eliminate grinding marks and traces, and a passive force control method to reduce over-and under-cutting phenomenon in robotic abrasive belt grinding of turbine blades. The adoption of Kalman filter information fusion methodology can improve controlled force accuracy and efficiency, as well as avoid control interference. The proposed hybrid force control method has been verified to achieve desired surface quality and higher profile precision.

ROBOTICS AND COMPUTER-INTEGRATED MANUFACTURING (2021)

Add to Collection

Article Engineering, Manufacturing

A machining test to evaluate thermal influence on the kinematics of a five-axis machine tool

Soichi Ibaraki et al.

Summary: By using kinematic modeling, this paper investigates the thermal influence on the position and orientation errors of rotary axis average lines in five-axis machine tools. A new machining test method is proposed and an experimental case study demonstrates the observable changes in these errors due to thermal effects in finished test piece geometry.

INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2021)

Add to Collection

Article Engineering, Manufacturing

Tracking error prediction informed motion control of a parallel machine tool for high-performance machining

Zenghui Xie et al.

Summary: This study reveals the tracking error generation mechanism for Parallel Machine Tools (PMTs) and proposes an integrated control method to achieve efficient and high-quality machining. By utilizing stepwise identification and feedrate scheduling methods, the tracking errors of PMTs are reduced, leading to improved machining efficiency and quality.

INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2021)

Add to Collection

Article Computer Science, Interdisciplinary Applications

Collision-free and smooth joint motion planning for six-axis industrial robots by redundancy optimization

Yao-An Lu et al.

Summary: Effective planning of joint motion is essential in robotic applications such as welding, milling, and laser cutting. Kinematic redundancy in six-axis industrial robots can be utilized to optimize joint motion, ensuring smoothness and collision-free operation. Existing methods often fail to fully exploit this redundancy, prompting the development of a new optimization approach presented in this paper.

ROBOTICS AND COMPUTER-INTEGRATED MANUFACTURING (2021)

Add to Collection

Article Computer Science, Interdisciplinary Applications

Kinematic calibration of a 5-axis parallel machining robot based on dimensionless error mapping matrix

Xuan Luo et al.

Summary: An improved method for kinematic calibration of a 5-axis parallel machining robot is proposed, which has been proven to have superior performance in kinematics and identification simulations, and validated through experiments.

ROBOTICS AND COMPUTER-INTEGRATED MANUFACTURING (2021)

Add to Collection

Article Engineering, Manufacturing

A general framework of workpiece setup optimization for the five-axis machining

Song Gao et al.

INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2020)

Add to Collection

Article Engineering, Mechanical

Data-driven thermally-induced error compensation method of high-speed and precision five-axis machine tools

Jialan Liu et al.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2020)

Add to Collection

Article Computer Science, Interdisciplinary Applications

Accurate dynamic modeling and control parameters design of an industrial hybrid spray-painting robot

Binbin Zhang et al.

ROBOTICS AND COMPUTER-INTEGRATED MANUFACTURING (2020)

Add to Collection

Article Computer Science, Interdisciplinary Applications

Stiffness-based pose optimization of an industrial robot for five-axis milling

Gang Xiong et al.

ROBOTICS AND COMPUTER-INTEGRATED MANUFACTURING (2019)

Add to Collection

Article Computer Science, Interdisciplinary Applications

Inverse kinematics of a 5-axis hybrid robot with non-singular tool path generation

Qi Liu et al.

ROBOTICS AND COMPUTER-INTEGRATED MANUFACTURING (2019)

Add to Collection

Article Engineering, Manufacturing

Singularity avoidance for five-axis machine tools through introducing geometrical constraints

Min Wan et al.

INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2018)

Add to Collection

Article Engineering, Manufacturing

Singularities in five-axis machining: Cause, effect and avoidance

R. J. Cripps et al.

INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2017)

Add to Collection

Article Engineering, Manufacturing

Improving machined surface texture in avoiding five-axis singularity with the acceptable-texture orientation region concept

Zhiwei Lin et al.

INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2016)

Add to Collection

Article Engineering, Industrial

New algorithm to minimise kinematic tool path errors around 5-axis machining singular points

Chu A. My et al.

INTERNATIONAL JOURNAL OF PRODUCTION RESEARCH (2016)

Add to Collection

Article Engineering, Industrial

A tool path patching strategy around singular point in 5-axis ball-end milling

Laureen Grandguillaume et al.

INTERNATIONAL JOURNAL OF PRODUCTION RESEARCH (2016)

Add to Collection

Article Engineering, Mechanical

Mobility, Singularity, and Kinematics Analyses of a Novel Spatial Parallel Mechanism

Fugui Xie et al.

JOURNAL OF MECHANISMS AND ROBOTICS-TRANSACTIONS OF THE ASME (2016)

Add to Collection

Article Automation & Control Systems

A new test part to identify performance of five-axis machine tool-part I: geometrical and kinematic characteristics of S part

Wei Wang et al.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2015)

Add to Collection

Article Engineering, Manufacturing

Corner rounding of linear five-axis tool path by dual PH curves blending

Jing Shi et al.

INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2015)

Add to Collection

Article Computer Science, Interdisciplinary Applications

A practical path planning methodology for wire and arc additive manufacturing of thin-walled structures

Donghong Ding et al.

ROBOTICS AND COMPUTER-INTEGRATED MANUFACTURING (2015)

Add to Collection

Article Automation & Control Systems

Non-singular tool path planning by translating tool orientations in C-space

Zhiwei Lin et al.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2014)

Add to Collection

Article Computer Science, Interdisciplinary Applications

Type synthesis of 2T1R-type parallel kinematic mechanisms and the application in manufacturing

Fugui Xie et al.

ROBOTICS AND COMPUTER-INTEGRATED MANUFACTURING (2014)

Add to Collection

Article Robotics

A Comparison Study on Motion/Force Transmissibility of Two Typical 3-DOF Parallel Manipulators: The Sprint Z3 and A3 Tool Heads

Xiang Chen et al.

INTERNATIONAL JOURNAL OF ADVANCED ROBOTIC SYSTEMS (2014)

Add to Collection

Article Automation & Control Systems

Optimisation of workpiece setup for continuous five-axis milling: application to a five-axis BC type machining centre

Xavier Pessoles et al.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2013)

Add to Collection

Article Engineering, Manufacturing

Generalized kinematics of five-axis serial machines with non-singular tool path generation

Jixiang Yang et al.

INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2013)

Add to Collection

Article Engineering, Multidisciplinary

A unified approach to type synthesis of both rigid and flexure parallel mechanisms

Yu JingJun et al.

SCIENCE CHINA-TECHNOLOGICAL SCIENCES (2011)

Add to Collection

Article Engineering, Mechanical

Stiffness Modeling of the Tricept Robot Using the Overall Jacobian Matrix

Youyu Wang et al.

JOURNAL OF MECHANISMS AND ROBOTICS-TRANSACTIONS OF THE ASME (2009)

Add to Collection

Article Computer Science, Software Engineering

The Domain of Admissible Orientation concept: A new method for five-axis tool path optimisation

C. Castagnetti et al.

COMPUTER-AIDED DESIGN (2008)

Add to Collection

Article Engineering, Manufacturing

Orientation capability, error analysis, and dimensional optimization of two articulated tool heads with parallel kinematics

Xin-Jun Liu et al.

JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME (2008)

Add to Collection

Article Engineering, Manufacturing

Inverse kinematics of five-axis machines near singular configurations

Knut Sorby

INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2007)

Add to Collection

© Peeref 2019-2024. All rights reserved.