4.7 Article

Maintenance optimization in industry 4.0

Related references

Note: Only part of the references are listed.
Article Management

Age-based maintenance under population heterogeneity: Optimal exploration and exploitation

Ipek Dursun et al.

Summary: The study focuses on applying an age-based replacement policy in a system with a finite lifespan to preventively replace a critical component before failure. It considers the decision maker's belief on the existence of a weak population and builds an optimal policy that balances the trade-off between cost and learning the true population type.

EUROPEAN JOURNAL OF OPERATIONAL RESEARCH (2022)

Article Engineering, Mechanical

Optimization of equal-cycle maintenance strategy considering imperfect preventive maintenance

Xinlong Li et al.

Summary: The paper introduces an optimization model for imperfect preventive maintenance based on the meta-action unit, validates the model's effectiveness through numerical analysis, and analyzes the impact of different maintenance costs on optimal maintenance strategies and costs.

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART E-JOURNAL OF PROCESS MECHANICAL ENGINEERING (2022)

Article Green & Sustainable Science & Technology

Optimization of the Operation and Maintenance of renewable energy systems by Deep Reinforcement Learning

Luca Pinciroli et al.

Summary: This study utilizes Prognostics & Health Management (PHM) capabilities to support equipment of renewable energy systems, estimating their health state and predicting Remaining Useful Life (RUL). The authors propose a novel formulation of the optimization problem and solve it using Deep Reinforcement Learning (DRL). The approach, tested in a wind farm O&M problem, outperforms other DRL algorithms and automatically discovers the best performing policy.

RENEWABLE ENERGY (2022)

Article Computer Science, Interdisciplinary Applications

Condition-based maintenance optimization via stochastic programming with endogenous uncertainty

Egidio Leo et al.

Summary: This work addresses the challenge of integrating production planning and maintenance optimization for a process plant by adopting a stochastic programming formulation with decision-dependent uncertainty. The uncertain predictions of equipment degradation and remaining useful time of the plant are modeled using the Cox model, embedded into the optimization problem. Primal decomposition algorithms are suggested to decompose the MINLP formulation and compared to a global solver for performance evaluation.

COMPUTERS & CHEMICAL ENGINEERING (2022)

Article Management

Maintenance optimization for a single wind turbine component under time-varying costs

Thijs Nicolaas Schouten et al.

Summary: This paper introduces a new model for maintenance optimization in offshore wind turbine maintenance, which addresses time-varying costs. The authors extend the standard maintenance policies and prove that the optimal maintenance policy under time-varying costs is a time-dependent strategy. They also present linear programming models for parameter optimization. By applying these models, they demonstrate significant cost savings in maintenance planning.

EUROPEAN JOURNAL OF OPERATIONAL RESEARCH (2022)

Article Engineering, Environmental

Resilience-based approach to maintenance asset and operational cost planning

Hao Sun et al.

Summary: Reliability-based and risk-based methods are crucial for guiding maintenance activities to ensure system safety and minimize downtime. This paper proposes a resilience-based approach to optimize maintenance asset and operational cost, using a novel resilience metric. The approach is applied to a real-world scenario and demonstrates its effectiveness in determining the optimal maintenance cost.

PROCESS SAFETY AND ENVIRONMENTAL PROTECTION (2022)

Article Energy & Fuels

Optimal preventive maintenance strategies for a wind turbine gearbox

Yazid Aafif et al.

Summary: This paper investigates two maintenance strategies for wind turbine gearboxes, one based on temperature monitoring and the other based on imperfect preventive maintenance. Mathematical models are developed for optimizing the renewal period and the number of preventive maintenance actions. The economic feasibility of the two strategies is compared.

ENERGY REPORTS (2022)

Article Computer Science, Information Systems

Scheduling Under Uncertainty for Industry 4.0 and 5.0

Krisztian Bakon et al.

Summary: This article provides a review on how to address uncertainties in complex production and supply chains in scheduling tasks. It discusses the sources of uncertainties, scheduling algorithms, and models for handling uncertain elements and environments. The article also highlights the importance of I4.0 and I5.0 solutions in managing and reducing uncertainties. It hopes to serve as a starting point for R&D projects and algorithm developments in multi-agent, multistage, and inverse optimizations.

IEEE ACCESS (2022)

Article Computer Science, Artificial Intelligence

A novel Pythagorean fuzzy AHP and fuzzy TOPSIS methodology for green supplier selection in the Industry 4.0 era

Ahmet Calik

Summary: Advancements in information and communication technology have led to the integration of new technologies such as cloud computing, Internet of Things, big data analysis, and artificial intelligence into production systems. This transformation has not only affected production systems, but also influenced supplier selection processes, with recent research focusing on the combination of new technologies with traditional and green criteria.

SOFT COMPUTING (2021)

Article Health Care Sciences & Services

Optimisation of maintenance in delivery systems for cytostatic medicines

Maria Carmen Carnero et al.

Summary: The model uses fuzzy TOPSIS to solve group decision-making problems in a fuzzy environment. It helps organizations choose suitable maintenance policies and provides specific criteria for decision-making.

BMC HEALTH SERVICES RESEARCH (2021)

Article Energy & Fuels

Deep Reinforcement Learning Based on Proximal Policy Optimization for the Maintenance of a Wind Farm with Multiple Crews

Luca Pinciroli et al.

Summary: By combining the information provided by PHM with other factors, the optimization of operation and maintenance policies for wind turbines can be significantly improved. The use of deep reinforcement learning in a wind farm with multiple maintenance crews has proven to outperform other state-of-the-art strategies.

ENERGIES (2021)

Article Engineering, Industrial

Industry 4.0 and Industry 5.0-Inception, conception and perception

Xun Xu et al.

Summary: Industry 4.0, originating from Germany, has been widely adopted globally in the past decade. The European Commission recently introduced Industry 5.0, which is value-driven in contrast to the technology-driven Industry 4.0. The coexistence of these two Industrial Revolutions raises various questions that require in-depth discussions and clarifications.

JOURNAL OF MANUFACTURING SYSTEMS (2021)

Article Computer Science, Interdisciplinary Applications

Reinforcement learning-driven maintenance strategy: A novel solution for long-term aircraft maintenance decision optimization

Yang Hu et al.

Summary: This paper proposes a novel reinforcement learning-driven aircraft maintenance strategy, which can provide real-time maintenance decisions based on aircraft's future mission requirements, repair costs, spare parts storage, and PHM outputs. Testing in simulated scenarios demonstrates that the strategy can better adapt to the varying requirements of different maintenance situations.

COMPUTERS & INDUSTRIAL ENGINEERING (2021)

Review Energy & Fuels

Current Status and Future Trends in the Operation and Maintenance of Offshore Wind Turbines: A Review

Giovanni Rinaldi et al.

Summary: This paper reviews various methods and technologies in operation and maintenance planning, as well as condition monitoring of offshore renewable energy farms, with a focus on the offshore wind sector. It emphasizes the benefits and limitations of automation and digitalization in the industry.

ENERGIES (2021)

Article Computer Science, Interdisciplinary Applications

Multicomponent Maintenance Optimization: A Stochastic Programming Approach

Zhicheng Zhu et al.

Summary: Maintenance optimization for complex systems consisting of multiple components has been a challenging and open issue in the literature. In this paper, a novel two-stage model and a progressive-hedging-based heuristic algorithm were developed to address this challenge. Numerical results show that the heuristic algorithm can lead to significant cost savings compared to benchmark approaches such as dynamic programming and structural policy.

INFORMS JOURNAL ON COMPUTING (2021)

Review Computer Science, Artificial Intelligence

A review on fault detection and diagnosis techniques: basics and beyond

Anam Abid et al.

Summary: This paper discusses the importance of fault detection and diagnosis methods in modern systems, reviewing both traditional model-based and signal processing-based FDD approaches, as well as AI-based methods. Additionally, typical steps involved in the design and development of automatic FDD systems are systematically presented to outline the present status of FDD.

ARTIFICIAL INTELLIGENCE REVIEW (2021)

Review Computer Science, Information Systems

A review on genetic algorithm: past, present, and future

Sourabh Katoch et al.

Summary: This paper discusses recent advances in genetic algorithms, analyzing selected algorithms of interest in the research community. It helps new and demanding researchers gain a broader understanding of genetic algorithms. The review covers well-known algorithms, genetic operators, research domains, and future research directions in genetic algorithms.

MULTIMEDIA TOOLS AND APPLICATIONS (2021)

Article Computer Science, Artificial Intelligence

Optimization of preventive maintenance for series manufacturing system by differential evolution algorithm

Xiaofeng Wang et al.

JOURNAL OF INTELLIGENT MANUFACTURING (2020)

Article Management

A practical dynamic programming based methodology for aircraft maintenance check scheduling optimization

Qichen Deng et al.

EUROPEAN JOURNAL OF OPERATIONAL RESEARCH (2020)

Review Management

A review on maintenance optimization

Bram de Jonge et al.

EUROPEAN JOURNAL OF OPERATIONAL RESEARCH (2020)

Article Chemistry, Multidisciplinary

Modeling the Optimal Maintenance Scheduling Strategy for Bridge Networks

Xinhua Mao et al.

APPLIED SCIENCES-BASEL (2020)

Article Computer Science, Information Systems

Challenges to IoT-Enabled Predictive Maintenance for Industry 4.0

Michele Compare et al.

IEEE INTERNET OF THINGS JOURNAL (2020)

Article Computer Science, Information Systems

Anomaly Detection for Industrial Control System Based on Autoencoder Neural Network

Chao Wang et al.

WIRELESS COMMUNICATIONS & MOBILE COMPUTING (2020)

Proceedings Paper Engineering, Mechanical

On Digital Twins, Mirrors and Virtualisations

K. Worden et al.

MODEL VALIDATION AND UNCERTAINTY QUANTIFICATION, VOL 3 (2020)

Review Engineering, Electrical & Electronic

Reinforcement Learning and Its Applications in Modern Power and Energy Systems: A Review

Di Cao et al.

JOURNAL OF MODERN POWER SYSTEMS AND CLEAN ENERGY (2020)

Article Engineering, Industrial

A novel method for maintenance record clustering and its application to a case study of maintenance optimization

Zhe Yang et al.

RELIABILITY ENGINEERING & SYSTEM SAFETY (2020)

Article Computer Science, Information Systems

Digital Twin: Enabling Technologies, Challenges and Open Research

Aidan Fuller et al.

IEEE ACCESS (2020)

Article Computer Science, Interdisciplinary Applications

Modeling, simulation and optimization of maintenance cost aspects on multi-unit systems by stochastic Petri nets with predicates

Fernando P. Santos et al.

SIMULATION-TRANSACTIONS OF THE SOCIETY FOR MODELING AND SIMULATION INTERNATIONAL (2019)

Article Computer Science, Interdisciplinary Applications

Optimization under uncertainty in the era of big data and deep learning: When machine learning meets mathematical programming

Chao Ning et al.

COMPUTERS & CHEMICAL ENGINEERING (2019)

Article Automation & Control Systems

Digital Twin in Industry: State-of-the-Art

Fei Tao et al.

IEEE TRANSACTIONS ON INDUSTRIAL INFORMATICS (2019)

Editorial Material Engineering, Multidisciplinary

Mixed-integer nonlinear programming 2018

Nikolaos V. Sahinidis

OPTIMIZATION AND ENGINEERING (2019)

Article Green & Sustainable Science & Technology

Optimizing wind turbine's maintenance policies under performance-based contract

Jingjing Wang et al.

RENEWABLE ENERGY (2019)

Article Chemistry, Multidisciplinary

Integrated Approach of Safety, Sustainability, Reliability, and Resilience Analysis via a Return on Investment Metric

Kariana Moreno-Sader et al.

ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2019)

Article Chemistry, Multidisciplinary

Multi Equipment Condition Based Maintenance Optimization Using Multi-Objective Evolutionary Algorithms

Aitor Goti et al.

APPLIED SCIENCES-BASEL (2019)

Article Engineering, Chemical

Developing a risk-based maintenance model for a Natural Gas Regulating and Metering Station using Bayesian Network

Leonardo Leoni et al.

JOURNAL OF LOSS PREVENTION IN THE PROCESS INDUSTRIES (2019)

Proceedings Paper Engineering, Industrial

The Application of Reliability Centered Maintenance (RCM) Methods to Design Maintenance System in Manufacturing (Journal Review)

Zulaikha Sajaradj et al.

1ST INTERNATIONAL CONFERENCE ON INDUSTRIAL AND MANUFACTURING ENGINEERING (2019)

Article Engineering, Manufacturing

Reinforcement learning for opportunistic maintenance optimization

Andreas Kuhnle et al.

PRODUCTION ENGINEERING-RESEARCH AND DEVELOPMENT (2019)

Proceedings Paper Computer Science, Artificial Intelligence

Anomaly detection with convolutional neural networks for industrial surface inspection

Benjamin Staar et al.

12TH CIRP CONFERENCE ON INTELLIGENT COMPUTATION IN MANUFACTURING ENGINEERING (2019)

Article Automation & Control Systems

A Framework for Modeling and Optimizing Maintenance in Systems Considering Epistemic Uncertainty and Degradation Dependence Based on PDMPs

Yan-Hui Lin et al.

IEEE TRANSACTIONS ON INDUSTRIAL INFORMATICS (2018)

Article Engineering, Civil

Road Maintenance Optimization Model Based on Dynamic Programming in Urban Traffic Network

Jie Ma et al.

JOURNAL OF ADVANCED TRANSPORTATION (2018)

Article Computer Science, Artificial Intelligence

Ensemble of optimized echo state networks for remaining useful life prediction

Marco Rigamonti et al.

NEUROCOMPUTING (2018)

Article Computer Science, Interdisciplinary Applications

Quantitative analysis of a conceptual system dynamics maintenance performance model using multi-objective optimisation

Gary Linneusson et al.

JOURNAL OF SIMULATION (2018)

Article Engineering, Industrial

Maintenance policy selection: a fuzzy-ANP approach

Narges Hemmati et al.

JOURNAL OF MANUFACTURING TECHNOLOGY MANAGEMENT (2018)

Article Automation & Control Systems

Reinforcement learning-based flow management of gas turbine parts under stochastic failures

Michele Compare et al.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2018)

Proceedings Paper Automation & Control Systems

Maintenance for Sustainability in the Industry 4.0 context: a Scoping Literature Review

Chiara Franciosi et al.

IFAC PAPERSONLINE (2018)

Article Operations Research & Management Science

A framework for sensitivity analysis of decision trees

Bogumil Kaminski et al.

CENTRAL EUROPEAN JOURNAL OF OPERATIONS RESEARCH (2018)

Article Engineering, Civil

Lifetime reliability-based optimization of post-tensioned box-girder bridges

Tatiana Garcia-Segura et al.

ENGINEERING STRUCTURES (2017)

Article Management

A condition-based maintenance policy for degrading systems with age- and state-dependent operating cost

Bin Liu et al.

EUROPEAN JOURNAL OF OPERATIONAL RESEARCH (2017)

Article Management

Optimisation of maintenance routing and scheduling for offshore wind farms

Chandra Ade Irawan et al.

EUROPEAN JOURNAL OF OPERATIONAL RESEARCH (2017)

Article Computer Science, Hardware & Architecture

Maintenance Scheduling for Multicomponent Systems with Hidden Failures

Bin Liu et al.

IEEE TRANSACTIONS ON RELIABILITY (2017)

Article Green & Sustainable Science & Technology

Minimizing economic and environmental impacts through an optimal preventive replacement schedule: Model and application

Feri Afrinaldi et al.

JOURNAL OF CLEANER PRODUCTION (2017)

Article Engineering, Industrial

Selective maintenance of multi-state systems with structural dependence

Cuong D. Dao et al.

RELIABILITY ENGINEERING & SYSTEM SAFETY (2017)

Article Engineering, Industrial

Perspectives on trading cost and availability for corrective maintenance at the equipment type level

John Ahmet Erkoyuncu et al.

RELIABILITY ENGINEERING & SYSTEM SAFETY (2017)

Article Engineering, Industrial

Development of a Bayesian multi-state degradation model for up-to-date reliability estimations of working industrial components

M. Compare et al.

RELIABILITY ENGINEERING & SYSTEM SAFETY (2017)

Article Engineering, Industrial

A procedural approach for realizing prescriptive maintenance planning in manufacturing industries

Kurt Matyas et al.

CIRP ANNALS-MANUFACTURING TECHNOLOGY (2017)

Article Engineering, Civil

Forced Monte Carlo Simulation Strategy for the Design of Maintenance Plans with Multiple Inspections

Marco de Angelis et al.

ASCE-ASME JOURNAL OF RISK AND UNCERTAINTY IN ENGINEERING SYSTEMS PART A-CIVIL ENGINEERING (2017)

Proceedings Paper Transportation

Assessment of maintenance strategies for railway vehicles using Petri-nets

Daniel Eisenberger et al.

20TH EURO WORKING GROUP ON TRANSPORTATION MEETING, EWGT 2017 (2017)

Article Computer Science, Interdisciplinary Applications

An integrated fuzzy analytic hierarchy process and fuzzy multiple-criteria decision-making simulation approach for maintenance policy selection

Ali Azadeh et al.

SIMULATION-TRANSACTIONS OF THE SOCIETY FOR MODELING AND SIMULATION INTERNATIONAL (2016)

Article Computer Science, Hardware & Architecture

Towards smart factory for industry 4.0: a self-organized multi-agent system with big data based feedback and coordination

Shiyong Wang et al.

COMPUTER NETWORKS (2016)

Article Computer Science, Interdisciplinary Applications

Natural language processing for aviation safety reports: From classification to interactive analysis

Ludovic Tanguy et al.

COMPUTERS IN INDUSTRY (2016)

Article Thermodynamics

Reliability optimization of wind farms considering redundancy and opportunistic maintenance strategy

Karim Atashgar et al.

ENERGY CONVERSION AND MANAGEMENT (2016)

Editorial Material Automation & Control Systems

Industry 4.0-Prerequisites and Visions

Birgit Vogel-Heuser et al.

IEEE TRANSACTIONS ON AUTOMATION SCIENCE AND ENGINEERING (2016)

Editorial Material Automation & Control Systems

Diagnosis and Prognosis for Complicated Industrial Systems-Part I

Shen Yin et al.

IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS (2016)

Article Computer Science, Hardware & Architecture

Optimal Long-Run Imperfect Maintenance With Asymptotic Virtual Age

Ji Hwan Cha et al.

IEEE TRANSACTIONS ON RELIABILITY (2016)

Article Computer Science, Hardware & Architecture

A Stationary Grouping Maintenance Strategy Using Mean Residual Life and the Birnbaum Importance Measure for Complex Structures

Hai Canh Vu et al.

IEEE TRANSACTIONS ON RELIABILITY (2016)

Article Computer Science, Hardware & Architecture

Some Challenges and Opportunities in Reliability Engineering

Enrico Zio

IEEE TRANSACTIONS ON RELIABILITY (2016)

Article Engineering, Industrial

Optimizing production and imperfect preventive maintenance planning's integration in failure-prone manufacturing systems

El-Houssaine Aghezzaf et al.

RELIABILITY ENGINEERING & SYSTEM SAFETY (2016)

Article Engineering, Multidisciplinary

Maintenance cost minimization of manufacturing systems using PSO under reliability constraint

M. K. Loganathan et al.

INTERNATIONAL JOURNAL OF SYSTEM ASSURANCE ENGINEERING AND MANAGEMENT (2016)

Article Management

Genetic algorithms for condition-based maintenance optimization under uncertainty

M. Compare et al.

EUROPEAN JOURNAL OF OPERATIONAL RESEARCH (2015)

Article Engineering, Industrial

Joint production, setup and preventive maintenance policies of unreliable two-product manufacturing systems

M. Assid et al.

INTERNATIONAL JOURNAL OF PRODUCTION RESEARCH (2015)

Article Automation & Control Systems

Opportunistic maintenance for multi-component systems considering structural dependence and economic dependence

Junbao Geng et al.

JOURNAL OF SYSTEMS ENGINEERING AND ELECTRONICS (2015)

Article Engineering, Industrial

Optimum maintenance strategy under uncertainty in the lifetime distribution

Bram de Jonge et al.

RELIABILITY ENGINEERING & SYSTEM SAFETY (2015)

Article Engineering, Industrial

A condition-based maintenance of a dependent degradation-threshold-shock model in a system with multiple degradation processes

N. C. Caballe et al.

RELIABILITY ENGINEERING & SYSTEM SAFETY (2015)

Article Green & Sustainable Science & Technology

Reliability assessment of generic geared wind turbines by GTST-MLD model and Monte Carlo simulation

Y. F. Li et al.

RENEWABLE ENERGY (2015)

Article Management

Maintenance strategy selection and its impact in maintenance function A conceptual framework

R. S. Velmurugan et al.

INTERNATIONAL JOURNAL OF OPERATIONS & PRODUCTION MANAGEMENT (2015)

Article Energy & Fuels

Methods for Risk-Based Planning of O&M of Wind Turbines

Jannie Sonderkaer Nielsen et al.

ENERGIES (2014)

Article Engineering, Industrial

Maintenance grouping strategy for multi-component systems with dynamic contexts

Hai Canh Vu et al.

RELIABILITY ENGINEERING & SYSTEM SAFETY (2014)

Article Computer Science, Artificial Intelligence

ELECTRE III to dynamically support the decision maker about the periodic replacements configurations for a multi-component system

Antonella Certa et al.

DECISION SUPPORT SYSTEMS (2013)

Article Computer Science, Information Systems

Maintenance policy performance assessment in presence of imprecision based on Dempster-Shafer Theory of Evidence

P. Baraldi et al.

INFORMATION SCIENCES (2013)

Article Engineering, Industrial

Optimised asset replacement strategy in the presence of lead time uncertainty

Steven Richardson et al.

INTERNATIONAL JOURNAL OF PRODUCTION ECONOMICS (2013)

Article Computer Science, Interdisciplinary Applications

Onshore wind farms maintenance optimization using a stochastic model

S. Carlos et al.

MATHEMATICAL AND COMPUTER MODELLING (2013)

Article Engineering, Industrial

Evaluating maintenance policies by quantitative modeling and analysis

Enrico Zio et al.

RELIABILITY ENGINEERING & SYSTEM SAFETY (2013)

Article Automation & Control Systems

Vulnerability of Smart Grids With Variable Generation and Consumption: A System of Systems Perspective

Enrico Zio et al.

IEEE TRANSACTIONS ON SYSTEMS MAN CYBERNETICS-SYSTEMS (2013)

Article Engineering, Industrial

Decision support systems for effective maintenance operations

Jun Ni et al.

CIRP ANNALS-MANUFACTURING TECHNOLOGY (2012)

Article Management

A stochastic model for joint spare parts inventory and planned maintenance optimisation

Wenbin Wang

EUROPEAN JOURNAL OF OPERATIONAL RESEARCH (2012)

Article Engineering, Industrial

Maintenance policy selection in manufacturing firms using the fuzzy MCDM approach

Felix T. S. Chan et al.

INTERNATIONAL JOURNAL OF PRODUCTION RESEARCH (2012)

Article Operations Research & Management Science

Mixed integer least squares optimization for flight and maintenance planning of mission aircraft

George Kozanidis et al.

NAVAL RESEARCH LOGISTICS (2012)

Proceedings Paper Automation & Control Systems

Implementation of Decision Tree for Maintenance Policy Decision Making- A Case Study in Semiconductor Industry

Siew-Hong Ding et al.

MANUFACTURING ENGINEERING AND AUTOMATION II, PTS 1-3 (2012)

Review Engineering, Industrial

Condition based maintenance: a survey

Ashok Prajapati et al.

JOURNAL OF QUALITY IN MAINTENANCE ENGINEERING (2012)

Article Engineering, Industrial

A system for the detailed scheduling of wind farm maintenance

Andras Kovacs et al.

CIRP ANNALS-MANUFACTURING TECHNOLOGY (2011)

Article Engineering, Mechanical

Resilience-Driven System Design of Complex Engineered Systems

Byeng D. Youn et al.

JOURNAL OF MECHANICAL DESIGN (2011)

Article Engineering, Industrial

An evaluation of maintenance strategy using risk based inspection

Tan Zhaoyang et al.

SAFETY SCIENCE (2011)

Review Engineering, Industrial

A literature review and future perspectives on maintenance optimization

Anil Sharma et al.

JOURNAL OF QUALITY IN MAINTENANCE ENGINEERING (2011)

Article Computer Science, Artificial Intelligence

Production line simulation using STPN for maintenance scheduling

Yong Lei et al.

JOURNAL OF INTELLIGENT MANUFACTURING (2010)

Article Engineering, Multidisciplinary

Maintenance optimization models and criteria

Adriaan Van Horenbeek et al.

INTERNATIONAL JOURNAL OF SYSTEM ASSURANCE ENGINEERING AND MANAGEMENT (2010)

Article Engineering, Multidisciplinary

SELECTION OF MAINTENANCE STRATEGY FOR AIRCRAFT SYSTEMS USING MULTI-CRITERIA DECISION MAKING METHODOLOGIES

Alireza Ahmadi et al.

INTERNATIONAL JOURNAL OF RELIABILITY QUALITY AND SAFETY ENGINEERING (2010)

Article Computer Science, Theory & Methods

Anomaly detection

Varun Chandola et al.

ACM COMPUTING SURVEYS (2009)

Article Engineering, Industrial

Option model for joint production and preventive maintenance system

Xiaoning Jin et al.

INTERNATIONAL JOURNAL OF PRODUCTION ECONOMICS (2009)

Article Engineering, Industrial

Beyond its cost, the value of maintenance: An analytical framework for capturing its net present value

Karen B. Marais et al.

RELIABILITY ENGINEERING & SYSTEM SAFETY (2009)

Article Engineering, Industrial

Optimization of imperfect maintenance based on fuzzy logic for a single-stage single-product production system

Sophie Hennequin et al.

JOURNAL OF QUALITY IN MAINTENANCE ENGINEERING (2009)

Article Computer Science, Interdisciplinary Applications

Development of simulation and optimization platform to analyse maintenance policies performances for manufacturing systems

O. Roux et al.

INTERNATIONAL JOURNAL OF COMPUTER INTEGRATED MANUFACTURING (2008)

Article Computer Science, Artificial Intelligence

Simulation based optimization of a train maintenance facility

Yasmina Hani et al.

JOURNAL OF INTELLIGENT MANUFACTURING (2008)

Article Engineering, Industrial

Parallel simulation algorithm for maintenance optimization based on directed Acyclic Graph

Radim Bris

RELIABILITY ENGINEERING & SYSTEM SAFETY (2008)

Article Automation & Control Systems

Multi-objective integrated optimization research on preventive maintenance planning and production scheduling for a single machine

Jin Yulan et al.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2008)

Article Automation & Control Systems

Joint optimization of spare parts inventory and maintenance policies using genetic algorithms

M. Ali Ilgin et al.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2007)

Article Engineering, Industrial

Selection of optimum maintenance strategies based on a fuzzy analytic hierarchy process

Ling Wang et al.

INTERNATIONAL JOURNAL OF PRODUCTION ECONOMICS (2007)

Review Computer Science, Artificial Intelligence

Ant colony optimization -: Artificial ants as a computational intelligence technique

Marco Dorigo et al.

IEEE COMPUTATIONAL INTELLIGENCE MAGAZINE (2006)

Article Computer Science, Interdisciplinary Applications

A hybrid MCDM model for strategic vendor selection

Huan-Jyh Shyur et al.

MATHEMATICAL AND COMPUTER MODELLING (2006)

Article Computer Science, Software Engineering

New search algorithm for solving the maintenance scheduling problem for a family of machines

JY Huang

OPTIMIZATION METHODS & SOFTWARE (2006)

Article Computer Science, Interdisciplinary Applications

Modeling and optimizing a joint inventory control and preventive maintenance strategy for a randomly failing production unit: analytical and simulation approaches

N Rezg et al.

INTERNATIONAL JOURNAL OF COMPUTER INTEGRATED MANUFACTURING (2005)

Article Construction & Building Technology

Maintenance optimization of infrastructure networks using genetic algorithms

G Morcous et al.

AUTOMATION IN CONSTRUCTION (2005)

Article Management

An analytical model for the optimisation of maintenance profitability

S. A. Oke

INTERNATIONAL JOURNAL OF PRODUCTIVITY AND PERFORMANCE MANAGEMENT (2005)

Article Engineering, Industrial

Maintenance concept development: A case study

G Waeyenbergh et al.

INTERNATIONAL JOURNAL OF PRODUCTION ECONOMICS (2004)

Article Engineering, Industrial

Condition-based maintenance optimization by means of genetic algorithms and Monte Carlo simulation

M Marseguerra et al.

RELIABILITY ENGINEERING & SYSTEM SAFETY (2002)

Review Management

A survey of maintenance policies of deteriorating systems

HZ Wang

EUROPEAN JOURNAL OF OPERATIONAL RESEARCH (2002)

Article Engineering, Industrial

A framework for maintenance concept development

G Waeyenbergh et al.

INTERNATIONAL JOURNAL OF PRODUCTION ECONOMICS (2002)

Article Engineering, Industrial

Multiobjective optimization by genetic algorithms: application to safety systems

PG Busacca et al.

RELIABILITY ENGINEERING & SYSTEM SAFETY (2001)

Article Engineering, Industrial

A Bayesian approach to an adaptive preventive maintenance model

SH Sheu et al.

RELIABILITY ENGINEERING & SYSTEM SAFETY (2001)

Article Engineering, Industrial

The analytic hierarchy process applied to maintenance strategy selection

M Bevilacqua et al.

RELIABILITY ENGINEERING & SYSTEM SAFETY (2000)