4.7 Article

Solar cell efficiency tables (version 62)

Related references

Note: Only part of the references are listed.
Article Energy & Fuels

Solar cell efficiency tables (Version 61)

Martin A. Green et al.

Summary: This article presents consolidated tables that provide an extensive listing of the highest independently confirmed efficiencies for solar cells and modules. It outlines the guidelines for including results into these tables and reviews new entries since July 2022. The article also includes graphs showing the progress of each cell technology over the past 30 years and an updated list of designated test centers.

PROGRESS IN PHOTOVOLTAICS (2023)

Article Energy & Fuels

Two-terminal III-V//Si triple-junction solar cell with power conversion efficiency of 35.9 % at AM1.5g

Patrick Schygulla et al.

Summary: By optimizing the III-V top structure, the efficiency of a two-terminal wafer-bonded III-V//Si triple-junction solar cell was increased from 34.1% to 35.9%. The integration of a GaInAsP absorber in the middle cell led to an increase in open-circuit voltage, while better current matching of all subcells enhanced the short-circuit current. An upright grown structure achieved the highest cell efficiency of 35.9%, showcasing future improvement opportunities and limits.

PROGRESS IN PHOTOVOLTAICS (2022)

Article Multidisciplinary Sciences

Scalable processing for realizing 21.7%-efficient all-perovskite tandem solar modules

Ke Xiao et al.

Summary: Efficient all-perovskite tandem solar modules were fabricated using tunable cesium ratio of mixed-halide perovskite and an electrically conductive conformal diffusion barrier. These modules demonstrated high efficiency and stability even after continuous operation.

SCIENCE (2022)

Article Chemistry, Physical

Perovskite/CIGS Tandem Solar Cells: From Certified 24.2% toward 30% and Beyond

Marko Jost et al.

Summary: A monolithic perovskite/CIGS tandem solar cell with a certified power conversion efficiency (PCE) of 24.2% is demonstrated. The optimal device stack is determined using optical simulations, and the energy yield is evaluated. The results show the high potential of perovskite/CIGS tandem solar cells in significantly enhancing energy output.

ACS ENERGY LETTERS (2022)

Article Energy & Fuels

Solar cell efficiency tables (Version 60)

Martin A. Green et al.

Summary: This article presents consolidated tables showing the highest independently confirmed efficiencies for solar cells and modules. The guidelines for including results in these tables are outlined, and new entries since January 2022 are reviewed. An appendix describing temporary electrical contacting methods and terminology for large-area solar cells is also included.

PROGRESS IN PHOTOVOLTAICS (2022)

Article Energy & Fuels

A 1 cm2 Organic Solar Cell with 15.2% Certified Efficiency: Detailed Characterization and Identification of Optimization Potential

Uli Wuerfel et al.

Summary: This study reports organic solar cells based on a D18:Y6 absorber layer with a certified PCE of 15.24% on an active area of >= 1 cm(2). Optical device simulations and an analytical electrical model quantify the impacts of the transparent electrode's sheet resistance and cell design. Further photoluminescence and electroluminescence spectroscopy reveal electronic coupling between the acceptor and donor/acceptor interface.

SOLAR RRL (2021)

Article Energy & Fuels

Power rating procedure of hybrid concentrator/flat-plate photovoltaic bifacial modules

Juan F. Martinez et al.

Summary: Hybrid concentrator/flat-plate photovoltaic technology combines III-V multi-junction and flat-plate bifacial solar cells to convert direct, diffuse and rear irradiance into electricity. The power output of the modules is evaluated and rated at standard test and operating conditions, with the results showing high efficiency and output levels.

PROGRESS IN PHOTOVOLTAICS (2021)

Article Energy & Fuels

Epitaxial GaInP/GaAs/Si Triple-Junction Solar Cell with 25.9% AM1.5g Efficiency Enabled by Transparent Metamorphic AlxGa1-xAsyP1-y Step-Graded Buffer Structures

Markus Feifel et al.

Summary: The latest results of GaInP/GaAs/Si triple-junction solar cells are presented, with the implementation of transparent AlxGa1-xAsyP1-y step-graded metamorphic buffers leading to an increase in short-circuit current density and a new conversion efficiency record of 25.9%.

SOLAR RRL (2021)

Article Energy & Fuels

III-V//CuxIn1-yGaySe2 multijunction solar cells with 27.2% efficiency fabricated using modified smart stack technology with Pd nanoparticle array and adhesive material

Kikuo Makita et al.

Summary: The study developed an InGaP/AlGaAs//CuxIn1-yGaySe2 three-junction solar cell using adhesive material and a Pd nanoparticle array, achieving a total efficiency of 27.2% under AM 1.5 G illumination. The reliability of the solar cells was confirmed through a heat cycle test, showing high resistivity under severe conditions. The results demonstrate the potential of III-V//CuxIn1-yGaySe2 MJ solar cells for next-generation photovoltaic applications.

PROGRESS IN PHOTOVOLTAICS (2021)

Review Chemistry, Multidisciplinary

Understanding Degradation Mechanisms and Improving Stability of Perovskite Photovoltaics

Caleb C. Boyd et al.

CHEMICAL REVIEWS (2019)

Article Chemistry, Multidisciplinary

Cd-Free Cu2ZnSnS4 solar cell with an efficiency greater than 10% enabled by Al2O3 passivation layers

Xin Cui et al.

ENERGY & ENVIRONMENTAL SCIENCE (2019)

Article Physics, Applied

Thin-film microcrystalline silicon solar cells: 11.9% efficiency and beyond

Hitoshi Sai et al.

APPLIED PHYSICS EXPRESS (2018)

Article Physics, Applied

High-efficiency inverted metamorphic 1.7/1.1 eV GaInAsP/GaInAs dual-junction solar cells

Nikhil Jain et al.

APPLIED PHYSICS LETTERS (2018)

Article Energy & Fuels

Laser contact openings for local poly-Si-metal contacts enabling 26.1%-efficient POLO-IBC solar cells

Felix Haase et al.

SOLAR ENERGY MATERIALS AND SOLAR CELLS (2018)

Article Energy & Fuels

Building a Six-Junction Inverted Metamorphic Concentrator Solar Cell

John F. Geisz et al.

IEEE JOURNAL OF PHOTOVOLTAICS (2018)

Editorial Material Multidisciplinary Sciences

Make perovskite solar cells stable

Yang Yang et al.

NATURE (2017)

Article Energy & Fuels

Improved conversion efficiencies of thin-film silicon tandem (MICROMORPH (TM)) photovoltaic modules

J. S. Cashmore et al.

SOLAR ENERGY MATERIALS AND SOLAR CELLS (2016)

Article Energy & Fuels

Four-Junction Wafer-Bonded Concentrator Solar Cells

Frank Dimroth et al.

IEEE JOURNAL OF PHOTOVOLTAICS (2016)

Article Energy & Fuels

43% Sunlight to Electricity Conversion Efficiency Using CPV

Marc Steiner et al.

IEEE JOURNAL OF PHOTOVOLTAICS (2016)

Article Energy & Fuels

GaAs0.75 P0.25/Si Dual-Junction Solar Cells Grown by MBE and MOCVD

Tyler J. Grassman et al.

IEEE JOURNAL OF PHOTOVOLTAICS (2016)

Article Physics, Applied

High-efficiency amorphous silicon solar cells: Impact of deposition rate on metastability

Takuya Matsui et al.

APPLIED PHYSICS LETTERS (2015)

Article Energy & Fuels

40% efficient sunlight to electricity conversion

Martin A. Green et al.

PROGRESS IN PHOTOVOLTAICS (2015)

Article Energy & Fuels

The Passivated Emitter and Rear Cell (PERC): From conception to mass production

Martin A. Green

SOLAR ENERGY MATERIALS AND SOLAR CELLS (2015)

Article Energy & Fuels

Ageing of DSSC studied by electroluminescence and transmission imaging

Ursa Opara Krasovec et al.

SOLAR ENERGY MATERIALS AND SOLAR CELLS (2013)

Article Physics, Applied

Integrated dye-sensitized solar cell module with conversion efficiency of 8.2%

Liyuan Han et al.

APPLIED PHYSICS LETTERS (2009)

Article Energy & Fuels

Solar Cell Efficiency Tables (Version 33)

Martin A. Green et al.

PROGRESS IN PHOTOVOLTAICS (2009)

Article Materials Science, Multidisciplinary

A luminescent solar concentrator with 7.1% power conversion efficiency

L. H. Slooff et al.

PHYSICA STATUS SOLIDI-RAPID RESEARCH LETTERS (2008)

Article Energy & Fuels

A 21.5% efficient Cu(In,Ga)Se-2 thin-film concentrator solar cell

JS Ward et al.

PROGRESS IN PHOTOVOLTAICS (2002)