☆ 4.7 Article

An FFT-based method for estimating the in-plane elastic properties of honeycomb considering geometric imperfections at large elastic deformation

PROGRESS IN ORGANIC COATINGS (2023)

Related references

Note: Only part of the references are listed.

Article Materials Science, Biomaterials

Sol-gel-derived hard coatings from tetraethoxysilane and organoalkoxysilanes bearing zwitterionic and isothiazolinone groups and their antifouling behaviors

Jinyan Tan et al.

Summary: Two new organoalkoxysilanes were synthesized and used to produce three series of hybrid antifouling coatings, achieving a pencil hardness of 5H and good antifouling performance. Coatings with higher TEOS content exhibited better resistance to mussel settlement even with the same biofilm formation after field assay.

JOURNAL OF MATERIALS CHEMISTRY B (2022)

Add to Collection

Article Materials Science, Multidisciplinary

Preventing algae adhesion using lubricant-modified polydimethylsiloxane/polythiourethane nanocomposite

Haoyi Qiu et al.

Summary: An environmentally friendly fouling-release coating with high mechanical strength and good adhesion to substrates was developed using a simple blending approach, which showed promising performance in biofouling control.

MATERIALS & DESIGN (2022)

Add to Collection

Article Chemistry, Physical

Self-healing antifouling polymer brushes: Effects of degree of fluorination

Annemieke van Dam et al.

Summary: Eleven polymer brushes with varying side chain lengths and degrees of fluorination were developed and compared for their antifouling and self-healing performances. The heavily fluorinated polymer brushes showed better antifouling properties and had the lowest critical surface tension, while the singly fluorinated brushes showed the least antifouling capability with the highest critical surface tension. Lack of alignment of the side chains of the polymer brushes was proposed as the reason for this trend. Both fluorinated and non-fluorinated brushes displayed self-healing characteristics.

APPLIED SURFACE SCIENCE (2022)

Add to Collection

Article Chemistry, Physical

A facile hydrophilic modification strategy initiated by flame treatment of silicone coatings for marine antifouling application

Xingyang Xu et al.

Summary: This study improves the antifouling performances of PDMS materials by using flame treatment. The modifications of sulfobetaine silane and polyvinyl alcohol effectively reduce diatom adhesion. The simpler PVA modification method, through the crosslinking effect of boric acid, further enhances the antifouling performances.

APPLIED SURFACE SCIENCE (2022)

Add to Collection

Article Polymer Science

A durable and self-cleaning hydrogel micro-powder modified coating with improved utilization of Cu2+ for marine antifouling

Yadi Wang et al.

Summary: A durable antifouling coating was prepared by integrating the PVA/PAAm hydrogel micro-powder with epoxy resin to solve the problems of poor adhesion between hydrogels and substrates and low utilization rate of Cu2O antifouling agent. The coating with 10% hydrogel micro-powder content showed superior comprehensive performance and can provide engineering guidance.

JOURNAL OF POLYMER RESEARCH (2022)

Add to Collection

Article Materials Science, Multidisciplinary

Functional anti-corrosive and anti-bacterial surface coatings based on cuprous oxide/polyaniline microcomposites

Yunyan Zhao et al.

Summary: This study develops a dual-functional coating with antimicrobial effect and anti-corrosion performance by adding Cu2O/PANI composite to acrylic resin. Cu2O/PANI-2 demonstrates excellent anti-corrosive effect and superior antimicrobial property, which has significant implications for marine development.

MATERIALS & DESIGN (2022)

Add to Collection

Review Polymer Science

Functional polymer materials for modern marine biofouling control

Haoyi Qiu et al.

Summary: This article discusses the issue of marine biofouling and its impact on the environment, emphasizing the urgent need for the development of environmentally friendly alternative coatings. It also summarizes various manipulable surface properties and the current research on biofouling control coatings.

PROGRESS IN POLYMER SCIENCE (2022)

Add to Collection

Article Materials Science, Multidisciplinary

Fluorinated-Triazole-Modified ZnO and Its Application in Marine Antifouling

Yu Yang et al.

Summary: This paper presents a new antibacterial nanofiller, triazole fluoroaromatic hydrocarbon-modified nano-zinc oxide, which can be mixed with zinc acrylate resin to produce a low surface energy antifouling coating. The coating exhibits a high bactericidal rate and is expected to be widely used in the field of marine antifouling.

COATINGS (2022)

Add to Collection

Article Engineering, Environmental

Transparent polyurethane coating with synergistically enhanced antibacterial mechanism composed of low surface free energy and biocide

Jiujiang Ji et al.

Summary: In this study, a durable transparent polyurethane coating with antibacterial and anti-fingerprint properties was developed. The coating displayed excellent light transmittance on diverse substrates and exhibited strong antibacterial activity against E. coli and S. aureus. Furthermore, the coating showed self-renewability even after abrasion tests, making it a promising candidate for various applications.

CHEMICAL ENGINEERING JOURNAL (2022)

Add to Collection

Article Engineering, Environmental

Rapid curing and self-stratifying lacquer coating with antifouling and anticorrosive properties

Yuxian Chen et al.

Summary: This study presents a rapid curing, self-stratifying amphiphilic hybrid lacquer coating with excellent antifouling and anticorrosive properties. By introducing specific compounds, the performance of natural lacquer was improved, providing a new strategy for the development of coatings with both antifouling and anticorrosive capabilities.

CHEMICAL ENGINEERING JOURNAL (2021)

Add to Collection

Article Biophysics

Eco-friendly erucamide-polydimethylsiloxane coatings for marine anti-biofouling

Eunseok Seo et al.

Summary: The study proposes a new eco-friendly EP coating technology with anti-biofouling and drag reduction effects, showing superior performance compared to the existing OP coating.

COLLOIDS AND SURFACES B-BIOINTERFACES (2021)

Add to Collection

Article Green & Sustainable Science & Technology

Urushiol-based benzoxazine copper polymer with low surface energy, strong substrate adhesion and antibacterial for marine antifouling application

Jipeng Chen et al.

Summary: UBCP is an eco-friendly antifouling coating material synthesized from natural urushiol, which exhibits excellent antifouling and antibacterial properties. It provides a promising approach to address economic and operational issues caused by marine biofouling.

JOURNAL OF CLEANER PRODUCTION (2021)

Add to Collection

Article Nanoscience & Nanotechnology

Kill-Resist-Renew Trinity: Hyperbranched Polymer with Self-Regenerating Attack and Defense for Antifouling Coatings

Guoxiong Dai et al.

Summary: This study presents a novel approach to combat marine biofouling by developing a polymeric coating with integrated fouling killing, resistance, and releasing functions. The coating degrades at the surface/seawater interface, generating antifouling and zwitterionic groups for effective protection. The controllable degradation rate and synergistic antibacterial effects make this coating a promising solution to the challenge of marine biofouling.

ACS APPLIED MATERIALS & INTERFACES (2021)

Add to Collection

Article Chemistry, Physical

Antifouling performance analysis of peptide-modified glass microstructural surfaces

Tong Lou et al.

Summary: The study demonstrates the preparation of an antifouling coating by bonding nisin on glass microstructure surfaces using dopamine as a coupling agent. The results show that this coating can effectively inhibit the attachment of both algae and bacteria.

APPLIED SURFACE SCIENCE (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Designing novel anti-biofouling coatings on titanium based on the ferroelectric-induced strategy

Ruoyun Wang et al.

Summary: The article discusses a novel design strategy for anti-biofouling coatings by embedding BaTiO3 particles in TiO2 coatings to achieve antimicrobial properties. The study demonstrates the crucial role of the ferroelectric effect of the coatings in the antimicrobial mechanism.

MATERIALS & DESIGN (2021)

Add to Collection

Article Agricultural Engineering

Synthesis and characterization of tailor-made zwitterionic lignin for resistance to protein adsorption

Liangliang An et al.

Summary: Tailor-made zwitterionic lignin with protein resistance was synthesized through a two-step grafting reaction, providing sulfobetaine structures and improved hydrophilicity. The zwitterionized lignin showed significantly reduced protein adsorption while maintaining comparable antioxidant activity, demonstrating promising prospects.

INDUSTRIAL CROPS AND PRODUCTS (2021)

Add to Collection

Review Chemistry, Multidisciplinary

Functional nanomaterials, synergisms, and biomimicry for environmentally benign marine antifouling technology

Avishek Kumar et al.

Summary: This article discusses the challenges of marine biofouling in maritime industries, highlighting drawbacks of current biocide-based approaches. It also introduces strategies based on natural antifouling products and physio-chemical properties. Furthermore, it reviews environmentally friendly marine antifouling technologies based on advanced nanocomposites, synergistic effects, and biomimetic approaches, comparing their benefits and potential drawbacks to existing techniques.

MATERIALS HORIZONS (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Silicone-Based Fouling-Release Coatings for Marine Antifouling

Peng Hu et al.

LANGMUIR (2020)

Add to Collection

Article Nanoscience & Nanotechnology

Highly Branched Copolymers with Degradable Bridges for Antifouling Coatings

Hongjun Yang et al.

ACS APPLIED MATERIALS & INTERFACES (2020)

Add to Collection

Article Biotechnology & Applied Microbiology

Combining a bio-based polymer and a natural antifoulant into an eco-friendly antifouling coating

Ho Yin Chiang et al.

BIOFOULING (2020)

Add to Collection

Article Chemistry, Multidisciplinary

From the Nature for the Nature: An Eco-Friendly Antifouling Coating Consisting of Poly(lactic acid)-Based Polyurethane and Natural Antifoulant

Jiansen Pan et al.

ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Highly Effective Functionalized Coatings with Antibacterial and Antifouling Properties

Marios Michailidis et al.

ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2020)

Add to Collection

Article Polymer Science

Highly Dielectric Rubber Bearing Cyanoethyl Group with Various Side-Chain Structures

Ryosuke Matsuno et al.

MACROMOLECULES (2020)

Add to Collection

Article Materials Science, Multidisciplinary

Siloxy Silylester Methacrylate Diblock Copolymer-Based Coatings with Tunable Erosion and Marine Antifouling Properties

Marlene Lejars et al.

ACS APPLIED POLYMER MATERIALS (2020)

Add to Collection

Article Engineering, Chemical

Enhanced Antifouling and Anticorrosion Properties of Stainless Steel by Biomimetic Anchoring PEGDMA-Cross-Linking Polycationic Brushes

Bin Zhang et al.

INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2019)

Add to Collection

Article Chemistry, Multidisciplinary

Self-Stratifying Silicone Coating with Nonleaching Antifoulant for Marine Anti-Biofouling

Qingyi Xie et al.

ADVANCED MATERIALS INTERFACES (2019)

Add to Collection

Article Chemistry, Applied

Cu2O-clay composites with sub-micrometer-sized Cu2O particles for marine antifouling paints

Pengchong Li et al.

JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH (2019)

Add to Collection

Article Materials Science, Multidisciplinary

Manufacture and Characteristics of Oil-Modified Refined Lacquer for Wood Coatings

Chia-Wei Chang et al.

COATINGS (2019)

Add to Collection

Article Chemistry, Physical

Development of Marine Antifouling Epoxy Coating Enhanced with Clay Nanotubes

Ye Fu et al.

MATERIALS (2019)

Add to Collection

Article Chemistry, Physical

Functionalizing aluminum substrata by quaternary ammonium for antifouling performances

Xiaoyan He et al.

APPLIED SURFACE SCIENCE (2018)

Add to Collection

Article Chemistry, Applied

Development of direct contact-killing non-leaching antimicrobial polyurethanes through click chemistry

Kaimei Peng et al.

JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH (2018)

Add to Collection

Article Multidisciplinary Sciences

Combat biofouling with microscopic ridge-like surface morphology: a bioinspired study

Jimin Fu et al.

JOURNAL OF THE ROYAL SOCIETY INTERFACE (2018)

Add to Collection

Article Materials Science, Multidisciplinary

Multi-scale surface topography to minimize adherence and viability of nosocomial drug-resistant bacteria

Jafar Hasan et al.

MATERIALS & DESIGN (2018)

Add to Collection

Article Chemistry, Applied

Biodegradable poly(ester)-poly(methyl methacrylate) copolymer for marine anti-biofouling

Guoxiong Dai et al.

PROGRESS IN ORGANIC COATINGS (2018)

Add to Collection

Article Chemistry, Multidisciplinary

Environmentally Friendly Antifouling Coatings Based on Biodegradable Polymer and Natural Antifoulant

Chunfeng Ma et al.

ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2017)

Add to Collection

Article Chemistry, Physical

Self-repairing silicone coatings for marine anti-biofouling

Chao Liu et al.

JOURNAL OF MATERIALS CHEMISTRY A (2017)

Add to Collection

Article Engineering, Chemical

Degradable Polymers for Marine Antibiofouling: Optimizing Structure To Improve Performance

Chunfeng Ma et al.

INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2016)

Add to Collection

Article Polymer Science

An investigation into the curing of urushi and tung oil films by thermoanalytical and mass spectrometric techniques

Diego Tamburini et al.

POLYMER DEGRADATION AND STABILITY (2016)

Add to Collection

Article Nanoscience & Nanotechnology

Poly(dimethylsiloxane)-Based Polyurethane with Chemically Attached Antifoulants for Durable Marine Antibiofouling

Qingyi Xie et al.

ACS APPLIED MATERIALS & INTERFACES (2015)

Add to Collection

Article Nanoscience & Nanotechnology

Highly Efficient Antibacterial Surface Grafted with a Triclosan-Decorated Poly(N-Hydroxyethylacrylamide) Brush

Hai-Xia Wu et al.

ACS APPLIED MATERIALS & INTERFACES (2015)

Add to Collection

Article Agricultural Engineering

Modified tannin extracted from black wattle tree as an environmentally friendly antifouling pigment

Rafael S. Peres et al.

INDUSTRIAL CROPS AND PRODUCTS (2015)

Add to Collection

Article Chemistry, Multidisciplinary

Fabrication of binary components based on a poly(ionic liquid) through grafting and clicking and their synergistic antifouling activity

Wenwen Zhao et al.

RSC ADVANCES (2015)

Add to Collection

Review Polymer Science

Polymer brush coatings for combating marine biofouling

Wen Jing Yang et al.

PROGRESS IN POLYMER SCIENCE (2014)

Add to Collection

Review Chemistry, Multidisciplinary

Fouling Release Coatings: A Nontoxic Alternative to Biocidal Antifouling Coatings

Marlene Lejars et al.

CHEMICAL REVIEWS (2012)

Add to Collection

Article Chemistry, Multidisciplinary

Synthesis and properties of thermosetting resin based on urushiol

Hongli Xu et al.

RSC ADVANCES (2012)

Add to Collection

Article Engineering, Biomedical

Surface behaviour of biomaterials:: The theta surface for biocompatibility

Robert Edward Baier

JOURNAL OF MATERIALS SCIENCE-MATERIALS IN MEDICINE (2006)

Add to Collection

Article Biotechnology & Applied Microbiology

Mechanical aspects of silicone coatings for hard foulant control

IL Singer et al.

BIOFOULING (2000)

Add to Collection

Article Biotechnology & Applied Microbiology

Mechanical factors favoring release from fouling release coatings

RF Brady et al.

BIOFOULING (2000)

Add to Collection

© Peeref 2019-2024. All rights reserved.