Related references
Note: Only part of the references are listed.Effect of heat treatment on properties of Al-Mg-Sc-Zr alloy printed by selective laser melting
Yuan Ren et al.
APPLIED SURFACE SCIENCE (2022)
Applications of Wrought Austenitic Stainless Steel Corrosion Testing to Laser Powder Bed Fusion 316L
Duane Armell T. Macatangay et al.
CORROSION (2022)
Recrystallization in non-conventional microstructures of 316L stainless steel produced via laser powder-bed fusion: effect of particle coarsening kinetics
F. C. Pinto et al.
JOURNAL OF MATERIALS SCIENCE (2022)
On the microstructure and texture evolution in 17-4 PH stainless steel during laser powder b e d fusion: Towards textural design
M. S. Moyle et al.
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2022)
Multi-scale characterisation of microstructure and texture of 316L stainless steel manufactured by laser powder bed fusion
Maxwell Moyle et al.
MATERIALS CHARACTERIZATION (2022)
Alloy design strategy for microstructural-tailored scandium-modified aluminium alloys for additive manufacturing
D. Schimbaeck et al.
SCRIPTA MATERIALIA (2022)
Chemical and mechanical post-processing of Alloy 718 built via electron beam-powder bed fusion: Surface texture and corrosion behavior
Mahmoud Sadeghi et al.
MATERIALS & DESIGN (2022)
Towards high-temperature applications of aluminium alloys enabled by additive manufacturing
Richard A. Michi et al.
INTERNATIONAL MATERIALS REVIEWS (2022)
Microstructure modification of additive manufactured Ti-6Al-4V plates for improved ballistic performance properties
Edward W. Lui et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2022)
Variant selection in additively manufactured alpha-beta titanium alloys
S. L. Lu et al.
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2022)
Identification of unusual large zones of Category I triple-alpha-variant clusters in additively manufactured Ti-4Al-2V alloy
S. L. Lu et al.
SCRIPTA MATERIALIA (2022)
Laser-aided additive manufacturing of high entropy alloys: Processes, properties, and emerging applications
Zia Ullah Arif et al.
JOURNAL OF MANUFACTURING PROCESSES (2022)
Wire arc additive manufacturing of Inconel 718: Constitutive modelling and its microstructure basis
Naiyuan Xi et al.
JOURNAL OF MANUFACTURING PROCESSES (2022)
On the efficiency of machine learning for fatigue assessment of post-processed additively manufactured AlSi10Mg
E. Maleki et al.
INTERNATIONAL JOURNAL OF FATIGUE (2022)
Stabilized sub-grain and nano carbides-driven 1.2GPa grade ultra-strong CrMnFeCoNi high-entropy alloy additively manufactured by laser powder bed fusion
Young-Kyun Kim et al.
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2022)
Rapid method for comparative studies on stress relief heat treatment of additively manufactured 316L
E. Edin et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2022)
Intergranular precipitation and chemical fluctuations in an additively manufactured 2205 duplex stainless steel
Nima Haghdadi et al.
SCRIPTA MATERIALIA (2022)
Enhanced pitting resistance of directed energy deposition 316L stainless steel by post-manufacturing heat treatment
Junjie Chen et al.
NPJ MATERIALS DEGRADATION (2022)
Review on Additive Manufacturing of Multi-Material Parts: Progress and Challenges
Seymur Hasanov et al.
JOURNAL OF MANUFACTURING AND MATERIALS PROCESSING (2022)
Effect of Sc Content on the Microstructure and Properties of Al-Mg-Sc Alloys Deposited by Wire Arc Additive Manufacturing
Lingling Ren et al.
METALS AND MATERIALS INTERNATIONAL (2021)
Notched fatigue of additive manufactured metals under axial and multiaxial loadings, Part I: Effects of surface roughness and HIP and comparisons with their wrought alloys
Reza Molaei et al.
INTERNATIONAL JOURNAL OF FATIGUE (2021)
Microstructure of Al-Mg-Sc-Zr alloy cold spray deposits after heat treatment and hot isostatic pressing
M. Khomutov et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2021)
Additive manufacturing of steels: a review of achievements and challenges
Nima Haghdadi et al.
JOURNAL OF MATERIALS SCIENCE (2021)
Defects in additive manufactured metals and their effect on fatigue performance: A state-of-the-art review
Niloofar Sanaei et al.
PROGRESS IN MATERIALS SCIENCE (2021)
A recrystallization heat-treatment to reduce deformation anisotropy of additively manufactured Inconel 718
Nadia Kouraytem et al.
MATERIALS & DESIGN (2021)
New insights on cellular structures strengthening mechanisms and thermal stability of an austenitic stainless steel fabricated by laser powder-bed-fusion
Thomas Voisin et al.
ACTA MATERIALIA (2021)
A critical review of corrosion characteristics of additively manufactured stainless steels
Majid Laleh et al.
INTERNATIONAL MATERIALS REVIEWS (2021)
Dependence of mechanical properties on crystallographic orientation in nickel-based superalloy Hastelloy X fabricated by laser powder bed fusion
Oscar Sanchez-Mata et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2021)
Influence of Hf on the heat treatment response of additively manufactured Ni-base superalloy CM247LC
Seth Griffiths et al.
MATERIALS CHARACTERIZATION (2021)
Enhanced creep properties of nickel-base single crystal superalloy CMSX-4 by high magnetic field
Weidong Xuan et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2021)
Heterogeneous Aspects of Additive Manufactured Metallic Parts: A Review
G. M. Karthik et al.
METALS AND MATERIALS INTERNATIONAL (2021)
Introducing transformation twins in titanium alloys: an evolution of α-variants during additive manufacturing
H. Wang et al.
MATERIALS RESEARCH LETTERS (2021)
On the effect of build orientation and residual stress on the corrosion of 316L stainless steel prepared by selective laser melting
G. Sander et al.
CORROSION SCIENCE (2021)
Fatigue crack initiation and propagation in Alloy 718 with a bimodal grain morphology built via electron beam-powder bed fusion
Esmaeil Sadeghi et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2021)
Static recrystallization impact on grain structure and mechanical properties of heat-treated Hastelloy X produced via laser powder-bed fusion
Ali Keshavarzkermani et al.
MATERIALS CHARACTERIZATION (2021)
Structure and mechanical properties of an advanced aluminium alloy AlSi10MgCu(Ce,Zr) produced by selective laser melting
N. V. Dynin et al.
MATERIALS LETTERS (2021)
Heat treatment effect on the microstructure, mechanical properties, and wear behaviors of stainless steel 316L prepared via selective laser melting
Won-Sang Shin et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2021)
The effect of annealing on the selective laser melting of 2205 duplex stainless steel: Microstructure, grain orientation, and manufacturing challenges
Greg N. Nigon et al.
OPTICS AND LASER TECHNOLOGY (2021)
Microstructures and cyclic hot corrosion behavior of laser deposited Inconel 718 alloy under different heat treatment conditions
Jie Zhang et al.
OPTICS AND LASER TECHNOLOGY (2021)
Solidification cracking susceptibility of quaternary aluminium alloys
Jiangwei Liu et al.
SCIENCE AND TECHNOLOGY OF WELDING AND JOINING (2021)
Grain boundary character distribution in an additively manufactured austenitic stainless steel
Majid Laleh et al.
SCRIPTA MATERIALIA (2021)
Roadmap for additive manufacturing of HAYNES® 282® superalloy by laser beam powder bed fusion (PBF-LB) technology
Robert Otto et al.
MATERIALS & DESIGN (2021)
Enhanced thermal coarsening resistance in a nanostructured aluminum-cerium alloy produced by additive manufacturing
Hunter B. Henderson et al.
MATERIALS & DESIGN (2021)
Metal additive manufacturing in aerospace: A review
Byron Blakey-Milner et al.
MATERIALS & DESIGN (2021)
On the pitting corrosion of 2205 duplex stainless steel produced by laser powder bed fusion additive manufacturing in the as-built and post-processed conditions
Nima Haghdadi et al.
MATERIALS & DESIGN (2021)
Laser power modulated microstructure evolution, phase transformation and mechanical properties in NiTi fabricated by laser powder bed fusion
Wenliang Chen et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2021)
Strengthening mechanisms in selective laser-melted Inconel718 superalloy
Shuya Zhang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2021)
Additive manufacturing of high strength near ? titanium alloy Ti-55511 by engineering nanoscale secondary ? laths via in-situ heat treatment
Dan Li et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2021)
Microstructural evolution and high strain rate compressive behavior of as-built and heat-treated additively manufactured maraging steels
S. Dehgahi et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2021)
High-temperature oxidation performance of wire-arc additively manufactured Inconel 718 superalloys
G. K. Sujan et al.
MATERIALS SCIENCE AND TECHNOLOGY (2021)
Laser Powder Bed Fusion of Ti-6Al-2Sn-4Zr-6Mo Alloy and Properties Prediction Using Deep Learning Approaches
Hany Hassanin et al.
MATERIALS (2021)
Effect of Heat Treatment on the Microstructure and Mechanical Properties of Selective Laser-Melted Ti64 and Ti-5Al-5Mo-5V-1Cr-1Fe
Hongjie Bai et al.
METALS (2021)
Microstructure and corrosion resistance of stainless steel manufactured by laser melting deposition
S. F. Yang et al.
JOURNAL OF MANUFACTURING PROCESSES (2021)
Superior tensile properties of Hastelloy X enabled by additive manufacturing
Reza Ghiaasiaan et al.
MATERIALS RESEARCH LETTERS (2021)
Phase transformation pathways in Ti-6Al-4V manufactured via electron beam powder bed fusion
William J. Davids et al.
ACTA MATERIALIA (2021)
Separation of the impact of residual stress and microstructure on the fatigue performance of LPBF Ti-6Al-4V at elevated temperature
Tatiana Mishurova et al.
INTERNATIONAL JOURNAL OF FATIGUE (2021)
Powder Bed Fusion of nickel-based superalloys: A review
Salome Sanchez et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2021)
Influence of heat treatment on the microstructure evolution and elevated temperature mechanical properties of Hastelloy-X processed by laser directed energy deposition
A. N. Jinoop et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2021)
Effect of post heat-treatment on the microstructure and high-temperature oxidation behavior of precipitation hardened IN738LC superalloy fabricated by selective laser melting
Kyu-Sik Kim et al.
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2021)
Additive manufacturing of high entropy alloys: A practical review
Ahmad Ostovari Moghaddam et al.
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2021)
The effect of post-processing heat treatment on the microstructure, residual stress and mechanical properties of selective laser melted 316L stainless steel
Qi Chao et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2021)
Improved ballistic performance of additively manufactured Ti6Al4V with α-β lamellar microstructures
Alexander E. Medvedev et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2021)
High stability and high strength β-titanium alloys for additive manufacturing
C. H. Ng et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2021)
Investigation of the strengthening mechanism in 316L stainless steel produced with laser powder bed fusion
D. Riabov et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2021)
Coupling effects of high magnetic field and annealing on the microstructure evolution and mechanical properties of additive manufactured Ti-6Al-4V
Peixuan Li et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2021)
Effects of hot isostatic pressing and heat treatments on structural and corrosion properties of direct metal laser sintered parts
Mustafa Safa Yilmaz et al.
RAPID PROTOTYPING JOURNAL (2021)
Influence of Double Aging Heat Treatment on Phase Transformation and Dimensional Accuracy of Inconel 718 Alloy made Through Laser-Based Additive Manufacturing
V. Praveen Kumar et al.
TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS (2021)
The effects of energy density and heat treatment on the microstructure and mechanical properties of laser additive manufactured Haynes 282
John Boswell et al.
MATERIALS & DESIGN (2021)
Recent progress and scientific challenges in multi-material additive manufacturing via laser-based powder bed fusion
Chao Wei et al.
VIRTUAL AND PHYSICAL PROTOTYPING (2021)
Strain Rate Sensitivity of the Additive Manufacturing Material Scalmalloy®
P. Jakkula et al.
JOURNAL OF DYNAMIC BEHAVIOR OF MATERIALS (2021)
Effect of T6 heat treatment on the surface tribological and corrosion properties of AlSi10Mg samples produced by selective laser melting
Pei Wei et al.
MATERIALS CHARACTERIZATION (2021)
Mechanical properties and precipitation behavior of the heat-treated wire plus arc additively manufactured 2219 aluminum alloy
Yinghui Zhou et al.
MATERIALS CHARACTERIZATION (2021)
Corrosion Behavior of Selective Laser Melted AlSi10Mg Alloy in NaCl Solution and Its Dependence on Heat Treatment
Xin-Hui Gu et al.
ACTA METALLURGICA SINICA-ENGLISH LETTERS (2020)
Experimental characterization and crystal plasticity modeling of anisotropy, tension-compression asymmetry, and texture evolution of additively manufactured Inconel 718 at room and elevated temperatures
Saeede Ghorbanpour et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2020)
On the potential mechanisms of β to α' plus β decomposition in two phase titanium alloys during additive manufacturing: a combined transmission Kikuchi diffraction and 3D atom probe study
Niyanth Sridharan et al.
JOURNAL OF MATERIALS SCIENCE (2020)
Investigation of the effects of different heat treatment parameters on the corrosion and mechanical properties of the AlSi10Mg alloy produced with direct metal laser sintering
Gokhan Ozer et al.
MATERIALS AND CORROSION-WERKSTOFFE UND KORROSION (2020)
Electrochemical studies on the effect of residual stress on the corrosion of 316L manufactured by selective laser melting
V. Cruz et al.
CORROSION SCIENCE (2020)
On the origin of the high tensile strength and ductility of additively manufactured 316L stainless steel: Multiscale investigation
Bassem Barkia et al.
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2020)
Evaluation of additive electron beam melting of haynes 282 alloy
K. A. Unocic et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2020)
Effects of hot isostatic pressing and internal porosity on the performance of selective laser melted AlSi10Mg alloys
Tomotake Hirata et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2020)
Additive manufacturing of fatigue resistant austenitic stainless steels by understanding process-structure?property relationships
Jonathan W. Pegues et al.
MATERIALS RESEARCH LETTERS (2020)
The passivity of selective laser melted 316L stainless steel
Decheng Kong et al.
APPLIED SURFACE SCIENCE (2020)
Influence of microstructure and manganese sulfides on corrosion resistance of selective laser melted 17-4 PH stainless steel in acidic chloride medium
Michella Alnajjar et al.
CORROSION SCIENCE (2020)
Determination of the influence of a stress-relief heat treatment and additively manufactured surface on the fatigue behavior of selectively laser melted AISI 316L by using efficient short-time procedures
Bastian Blinn et al.
INTERNATIONAL JOURNAL OF FATIGUE (2020)
Fatigue of additive manufactured Ti-6Al-4V, Part I: The effects of powder feedstock, manufacturing, and post-process conditions on the resulting microstructure and defects
J. W. Pegues et al.
INTERNATIONAL JOURNAL OF FATIGUE (2020)
Fatigue of additive manufactured Ti-6Al-4V, Part II: The relationship between microstructure, material cyclic properties, and component performance
R. Molaei et al.
INTERNATIONAL JOURNAL OF FATIGUE (2020)
Effects of Postprocess Thermal Treatments on Static and Cyclic Deformation Behavior of Additively Manufactured Austenitic Stainless Steel
Jonathan W. Pegues et al.
JOM (2020)
Fatigue Performance of Additively Manufactured Ti-6Al-4V: Surface Condition vs. Internal Defects
Y. Y. Sun et al.
JOM (2020)
Element partitioning and electron backscatter diffraction analysis from feeding wire to as-deposited microstructure of wire and arc additive manufacturing with super duplex stainless steel
Xiaoyong Zhang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2020)
A trade-off between powder layer thickness and mechanical properties in additively manufactured maraging steels
SeyedAmirReza Shamsdini et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2020)
The role of texturing and microstructure evolution on the tensile behavior of heat-treated Inconel 625 produced via laser powder bed fusion
Giulio Marchese et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2020)
Effects of the addition of silicon to 7075 aluminum alloy on microstructure, mechanical properties, and selective laser melting processability
Yuki Otani et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2020)
Formation of Austenite in Additively Manufactured and Post-Processed Duplex Stainless Steel Alloys
A. D. Iams et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2020)
Strengthening and hardening mechanisms of additively manufactured stainless steels: The role of cell sizes
Zan Li et al.
SCRIPTA MATERIALIA (2020)
In situ tailoring microstructure in laser solid formed titanium alloy for superior fatigue crack growth resistance
Zhuang Zhao et al.
SCRIPTA MATERIALIA (2020)
Effects of linear heat input on microstructure and corrosion behavior of an austenitic stainless steel processed by wire arc additive manufacturing
DongXu Wen et al.
VACUUM (2020)
Grain structure control during metal 3D printing by high-intensity ultrasound
C. J. Todaro et al.
NATURE COMMUNICATIONS (2020)
Development of Heat Treatments for Selective Laser Melting Ti6Al4V Alloy: Effect on Microstructure, Mechanical Properties, and Corrosion Resistance
Silvia Cecchel et al.
ADVANCED ENGINEERING MATERIALS (2020)
Influence of heat treatment on corrosion behavior of rare earth element Sc modified Al-Mg alloy processed by selective laser melting
Han Zhang et al.
APPLIED SURFACE SCIENCE (2020)
Enhancing the corrosion resistance of selective laser melted 15-5PH martensite stainless steel via heat treatment
Li Wang et al.
CORROSION SCIENCE (2020)
Unanticipated drastic decline in pitting corrosion resistance of additively manufactured 316L stainless steel after high-temperature post-processing
Majid Laleh et al.
CORROSION SCIENCE (2020)
Two and three-dimensional characterisation of localised corrosion affected by lack-of-fusion pores in 316L stainless steel produced by selective laser melting
Majid Laleh et al.
CORROSION SCIENCE (2020)
Thermal Fatigue Properties of H13 Hot-Work Tool Steels Processed by Selective Laser Melting
Mei Wang et al.
METALS (2020)
Corrosion Behaviors of Selective Laser Melted Aluminum Alloys: A Review
Hongwei Chen et al.
METALS (2020)
Laser Powder Bed Fusion of Precipitation-Hardened Martensitic Stainless Steels: A Review
Le Zai et al.
METALS (2020)
A review of technological improvements in laser-based powder bed fusion of metal printers
AmirMahyar Khorasani et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2020)
Effect of Mg addition on microstructure and mechanical properties of Al-Si-Cu-Fe alloy with squeeze casting
Bo Jiang et al.
MATERIALS RESEARCH EXPRESS (2020)
Post heat treatment of additive manufactured AlSi10Mg: On silicon morphology, texture and small-scale properties
F. Alghamdi et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2020)
High strength heat-treatable β-titanium alloy for additive manufacturing
M. J. Bermingham et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2020)
A Tailored AlSiMg Alloy for Laser Powder Bed Fusion
Daniel Knoop et al.
METALS (2020)
Effect of Post Processing Heat Treatment Routes on Microstructure and Mechanical Property Evolution of Haynes 282 Ni-Based Superalloy Fabricated with Selective Laser Melting (SLM)
Anagh Deshpande et al.
METALS (2020)
Comparative investigations into microstructural and mechanical properties of as-cast and laser powder bed fusion (LPBF) fabricated duplex steel (1.4517)Vergleichende Untersuchungen zu mikrostrukturellen und mechanischen Eigenschaften von Gussstahl und durch Laser-Pulver-Bett-Schmelzen hergestelltem Duplexstahl (1.4517)
I Raffeis et al.
MATERIALWISSENSCHAFT UND WERKSTOFFTECHNIK (2020)
Revealing relationships between porosity, microstructure and mechanical properties of laser powder bed fusion 316L stainless steel through heat treatment
Tobias Ronneberg et al.
MATERIALS & DESIGN (2020)
Effect of hot cracking on the mechanical properties of Hastelloy X superalloy fabricated by laser powder bed fusion additive manufacturing
Quanquan Han et al.
OPTICS AND LASER TECHNOLOGY (2020)
Origin of dislocation structures in an additively manufactured austenitic stainless steel 316L
K. M. Bertsch et al.
ACTA MATERIALIA (2020)
On the Microstructure and Electrochemical Properties of Additively Manufactured Duplex Stainless Steels Produced Using Laser-Powder Bed Fusion
D. Jiang et al.
CORROSION (2020)
Intergranular oxidation of Ni-base alloy 718 with a focus on additive manufacturing
Tom Sanviemvongsak et al.
CORROSION SCIENCE (2020)
Pitting corrosion of 17-4PH stainless steel manufactured by laser beam melting
Adrien Barroux et al.
CORROSION SCIENCE (2020)
Corrosion behavior of wire arc additive manufactured Inconel 718 superalloy
L. N. Zhang et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2020)
Effects of altered hot isostatic pressing treatments on the microstructures and mechanical performance of electron beam melted Ti-6Al-4V
Ahmad Abu-Issa et al.
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2020)
Selective laser melting and tempering of H13 tool steel for rapid tooling applications
Michael Katancik et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2020)
Laser Powder Bed Fusion and Heat Treatment of an AlCrFe(2)Ni(2)High Entropy Alloy
Dimitrios Vogiatzief et al.
FRONTIERS IN MATERIALS (2020)
Multimodal gamma ' precipitation in Inconel-738 Ni-based superalloy during electron-beam powder bed fusion additive manufacturing
Nima Haghdadi et al.
JOURNAL OF MATERIALS SCIENCE (2020)
Microstructure and properties of a high temperature Al-Ce-Mn alloy produced by additive manufacturing
A. Plotkowski et al.
ACTA MATERIALIA (2020)
Fatigue strength of additively manufactured 316L austenitic stainless steel
Punit Kumar et al.
ACTA MATERIALIA (2020)
Microstructural examination and corrosion behavior of selective laser melted and conventionally manufactured Ti6Al4V for dental applications
Hafiz Muhammad Hamza et al.
MATERIALS SCIENCE AND ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2020)
Effect of hot isostatic pressing on nanoparticles reinforced AlSi10Mg produced by selective laser melting
Yachao Wang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2020)
Additive manufacturing of an Fe-Cr-Ni-Al maraging stainless steel: Microstructure evolution, heat treatment, and strengthening mechanisms
Amir Hadadzadeh et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2020)
Effect of HIP process and subsequent heat treatment on microstructure and mechanical properties of direct metal laser sintered AlSi10Mg alloy
Onur Ertugrul et al.
RAPID PROTOTYPING JOURNAL (2020)
Corrosion of Al-3.5Cu-1.5 Mg-1Si alloy prepared by selective laser melting and heat treatment
Pei Wang et al.
INTERMETALLICS (2020)
Heat treatment effects on Inconel 625 components fabricated by wire plus arc additively manufacturing (WAAM)-part 2: mechanical properties
A. N. M. Tanvir et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2020)
Fatigue strength assessment of as built AlSi10Mg manufactured by SLM with different build orientations
S. Beretta et al.
INTERNATIONAL JOURNAL OF FATIGUE (2020)
Enhanced Corrosion Resistance of Additively Manufactured 316L Stainless Steel After Heat Treatment
Chengshuang Zhou et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2020)
Subsurface grain refinement in electron beam-powder bed fusion of Alloy 718: Surface texture and oxidation performance
Esmaeil Sadeghi et al.
MATERIALS CHARACTERIZATION (2020)
Influence of hot isostatic pressing post-treatment on the microstructure and mechanical behavior of standard and super duplex stainless steel produced by laser powder bed fusion
Johannes Kunz et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2020)
A defect-resistant Co-Ni superalloy for 3D printing
Sean P. Murray et al.
NATURE COMMUNICATIONS (2020)
A Review of Factors Affecting the Mechanical Properties of Maraging Steel 300 Fabricated via Laser Powder Bed Fusion
Barry Mooney et al.
METALS (2020)
Metal additive manufacturing: Technology, metallurgy and modelling
Shaun Cooke et al.
JOURNAL OF MANUFACTURING PROCESSES (2020)
Microstructure evolution and mechanical properties of wire-feed electron beam additive manufactured Ti-5Al-2Sn-2Zr-4Mo-4Cr alloy with different subtransus heat treatments
Guodong Zhang et al.
MATERIALS & DESIGN (2020)
Analyzing the 'non-equilibrium state' of grain boundaries in additively manufactured high-entropy CoCrFeMnNi alloy using tracer diffusion measurements
Nuri Choi et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2020)
Influence of laser power and powder feed rate on the microstructure evolution of laser metal deposited Ti-5553 on forged substrates
C. Hicks et al.
MATERIALS CHARACTERIZATION (2020)
Effect of heat treatment on microstructure, hardness and corrosion resistance of 7075 Al alloys fabricated by SLM
Peng Liu et al.
JOURNAL OF MANUFACTURING PROCESSES (2020)
A review on heat treatment efficiency in metastable β titanium alloys: the role of treatment process and parameters
Nihal Yumak et al.
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2020)
Microstructure and corrosion behavior of 316L stainless steel prepared using different additive manufacturing methods: A comparative study bringing insights into the impact of microstructure on their passivity
Reynier I. Revilla et al.
CORROSION SCIENCE (2020)
Effects of heat treatment and applied stresses on the corrosion performance of additively manufactured super duplex stainless steel clads
Pratik Murkute et al.
MATERIALIA (2020)
Influence of heat treatment on corrosion behaviors of 316L stainless steel in simulated cathodic environment of proton exchange membrane fuel cell (PEMFC)
D. G. Li et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2020)
Corrosion and Corrosion Protection of Additively Manufactured Aluminium Alloys-A Critical Review
Reynier Revilla et al.
MATERIALS (2020)
Anisotropy in microstructure and tensile properties of Ti-5Al-5Mo-5V-1Cr-1Fe produced via additive manufacturing
Zheng Liu et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2020)
Cellular size dependence on the strength of additively manufactured austenitic stainless steel
Decheng Kong et al.
MATERIALS LETTERS (2020)
Corrosion mechanism of an equimolar AlCoCrFeNi high-entropy alloy additively manufactured by electron beam melting
Kenta Yamanaka et al.
NPJ MATERIALS DEGRADATION (2020)
Enhanced tensile yield strength in laser additively manufactured Al0.3CoCrFeNi high entropy alloy
Mohan Sai Kiran Kumar Yadav Nartu et al.
MATERIALIA (2020)
Hot Isostatic Pressing of Aluminum-Silicon Alloys Fabricated by Laser Powder-Bed Fusion
Stephan Hafenstein et al.
TECHNOLOGIES (2020)
Influence of Heat Treatment Parameters on the Corrosion Resistance of Additively Manufactured Ti-6Al-4V Alloy
Dong-Il Seo et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2020)
Densification behavior, microstructure evolution, and mechanical performances of selective laser melted Ti-5Al-2.5Sn α titanium alloy: Effect of laser energy input
Kaiwen Wei et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2019)
A review of selective laser melting of aluminum alloys: Processing, microstructure, property and developing trends
Jinliang Zhang et al.
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2019)
Effect of post-process heat treatment on microstructure and properties of selective laser melted AlSi10Mg alloy
Longchao Zhuo et al.
MATERIALS LETTERS (2019)
Influence of post treatment on microstructure, porosity and mechanical properties of additive manufactured H13 tool steel
M. Asberg et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)
Influence of heat treatments on the corrosion mechanism of additive manufactured AlSi10Mg
Tim Rubben et al.
CORROSION SCIENCE (2019)
Corrosion behavior of AlSi10Mg alloy produced by laser powder bed fusion under chloride exposure
M. Cabrini et al.
CORROSION SCIENCE (2019)
Precipitation behavior of selective laser melted FeCoCrNiC0.05 high entropy alloy
Rui Zhou et al.
INTERMETALLICS (2019)
Effect of heat treatment and laser surface remelting on AlSi10Mg alloy fabricated by selective laser melting
Quanquan Han et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2019)
Fatigue properties of AlSi10Mg produced by Additive Layer Manufacturing
Julius N. Domfang Ngnekou et al.
INTERNATIONAL JOURNAL OF FATIGUE (2019)
Preparation and mechanical properties of selective laser melted H13 steel
Bo Ren et al.
JOURNAL OF MATERIALS RESEARCH (2019)
High mechanical strengths and ductility of stainless steel 304L fabricated using selective laser melting
Q. B. Nguyen et al.
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2019)
Mechanical properties and corrosion behavior of selective laser melted 316L stainless steel after different heat treatment processes
Decheng Kong et al.
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2019)
Role of grain structure, grain boundaries, crystallographic texture, precipitates, and porosity on fatigue behavior of Inconel 718 at room and elevated temperatures
Sean Gribbin et al.
MATERIALS CHARACTERIZATION (2019)
On the role of Zr content into Portevin-Le Chatelier (PLC) effect of selective laser melted high strength Al-Cu-Mg-Mn alloy
Xiaojia Nie et al.
MATERIALS LETTERS (2019)
Dynamic recrystallization behaviour of AlxCoCrFeNi high entropy alloys during high-temperature plane strain compression
Murugesan Annasamy et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)
Heat treatment of Inconel 718 produced by selective laser melting: Microstructure and mechanical properties
Wenpu Huang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)
Microstructural characterisation and in-situ straining of additive-manufactured X3NiCoMoTi 18-9-5 maraging steel
Ludmila Kucerova et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)
Microstructure and mechanical properties of direct laser metal deposited Haynes 282 superalloy
A. Ramakrishnan et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)
Effect of heat treatment on the microstructural evolution of a precipitation hardened superalloy produced by selective laser melting
Mang Ni et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)
Effect of heat treatment on microstructure and mechanical properties of 316L steel synthesized by selective laser melting
O. O. Salman et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)
Varied heat treatments and properties of laser powder bed printed Inconel 718
Runbo Jiang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)
Effects of post-deposition heat treatment on microstructures of GTA-additive manufactured 2219-Al
Xiaoyu Cai et al.
SCIENCE AND TECHNOLOGY OF WELDING AND JOINING (2019)
The scratch behaviour of AlxCoCrFeNi (x=0.3 and 1.0) high entropy alloys
N. Haghdadi et al.
WEAR (2019)
Microstructural Evolution of Post-Processed Hastelloy X Alloy Fabricated by Laser Powder Bed Fusion
Giulio Marchese et al.
MATERIALS (2019)
New Aluminum Alloys Specifically Designed for Laser Powder Bed Fusion: A Review
Alberta Aversa et al.
MATERIALS (2019)
Advanced Mechanical Strength in Post Heat Treated SLM 2507 at Room and High Temperature Promoted by Hard/Ductile Sigma Precipitates
Kamran Saeidi et al.
METALS (2019)
Additive manufacturing of Ti6Al4V alloy: A review
Shunyu Liu et al.
MATERIALS & DESIGN (2019)
The role of lattice defects, element partitioning and intrinsic heat effects on the microstructure in selective laser melted Ti-6Al-4V
Jan Haubrich et al.
ACTA MATERIALIA (2019)
Statistical approach for electrochemical evaluation of the effect of heat treatments on the corrosion resistance of AlSi10Mg alloy by laser powder bed fusion
M. Cabrini et al.
ELECTROCHIMICA ACTA (2019)
Elemental segregation in an AlCoCrFeNi high-entropy alloy - A comparison between selective laser melting and induction melting
Dennis Karlsson et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2019)
High-throughput fabrication of nickel-based alloys with different Nb contents via a dual-feed additive manufacturing system: Effect of Nb content on microstructural and mechanical properties
Decheng Kong et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2019)
Effect of the T6 heat treatment on corrosion behavior of additive manufactured and gravity cast AlSi10Mg alloy
Luca Girelli et al.
MATERIALS AND CORROSION-WERKSTOFFE UND KORROSION (2019)
Influence of thermal post treatments on microstructure and oxidation behavior of EB-PBF manufactured Alloy 718
Esmaeil Sadeghi et al.
MATERIALS CHARACTERIZATION (2019)
The effect of sub-grain structure on intergranular corrosion of 316L stainless steel fabricated via selective laser melting
Cheng Man et al.
MATERIALS LETTERS (2019)
Heat treatment and properties of a hot work tool steel fabricated by additive manufacturing
Faraz Deirmina et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)
Effects of heat treatment and build orientations on the fatigue life of selective laser melted 15-5 PH stainless steel
Sagar Sarkar et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)
Evolution of Microstructure and mechanical properties of selective laser melted Ti-5Al-5V-5Mo-3Cr after heat treatments
Holly D. Carlton et al.
SCIENCE AND TECHNOLOGY OF WELDING AND JOINING (2019)
Wire-arc additive manufacturing of a duplex stainless steel: thermal cycle analysis and microstructure characterization
Vahid A. Hosseini et al.
WELDING IN THE WORLD (2019)
Microstructure and mechanical properties of wire plus arc additively manufactured 2024 aluminum alloy components: As-deposited and post heat-treated
Zewu Qi et al.
JOURNAL OF MANUFACTURING PROCESSES (2019)
Effect of aging treatment on the microstructure and mechanical properties of Al-3.02Mg-0.2Sc-0.1Zr alloy printed by selective laser melting
Ruidi Li et al.
MATERIALS & DESIGN (2019)
Selective laser melting of a high strength Al-Mn-Sc alloy: Alloy design and strengthening mechanisms
Qingbo Jia et al.
ACTA MATERIALIA (2019)
Effect of post-treatment on the microstructure and high-temperature oxidation behaviour of additively manufactured inconel 718 alloy
Yeon-Ji Kang et al.
CORROSION SCIENCE (2019)
Unexpected erosion-corrosion behaviour of 316L stainless steel produced by selective laser melting
Majid Laleh et al.
CORROSION SCIENCE (2019)
Hot corrosion behaviour of wire-arc additive manufactured Ni-based superalloy ATI 718Plus®
G. Asala et al.
CORROSION SCIENCE (2019)
Heat treatment effects on Inconel 625 components fabricated by wire plus arc additive manufacturing (WAAM)-part 1: microstructural characterization
A. N. M. Tanvir et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2019)
Fatigue crack branching in laser melting deposited Ti-55511 alloy
Kai Wang et al.
INTERNATIONAL JOURNAL OF FATIGUE (2019)
Effect of post-treatments on the fatigue behaviour of 316L stainless steel manufactured by laser powder bed fusion
Chola Elangeswaran et al.
INTERNATIONAL JOURNAL OF FATIGUE (2019)
Fatigue behavior of additively manufactured 17-4 PH stainless steel: Synergistic effects of surface roughness and heat treatment
P. D. Nezhadfar et al.
INTERNATIONAL JOURNAL OF FATIGUE (2019)
Effects of Recycled Powder on Solidification Defects, Microstructure, and Corrosion Properties of DMLS Fabricated AlSi10Mg
M. Rafieazad et al.
JOM (2019)
Intensified texture in selective electron beam melted Ti-6Al-4V thin plates by hot isostatic pressing and its fundamental influence on tensile fracture and properties
S. L. Lu et al.
MATERIALS CHARACTERIZATION (2019)
Effect of thermal cycling and aging stages on the microstructure and bending strength of a selective laser melted 300-grade maraging steel
F. F. Conde et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)
Enhancement of an additive-manufactured austenitic stainless steel by post-manufacture heat-treatment
Nan Chen et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)
Effect of solid solution plus double aging on microstructural characterization of 7075 Al alloys fabricated by selective laser melting (SLM)
Siyu Sun et al.
OPTICS AND LASER TECHNOLOGY (2019)
3D printing of Aluminium alloys: Additive Manufacturing of Aluminium alloys using selective laser melting
Nesma T. Aboulkhair et al.
PROGRESS IN MATERIALS SCIENCE (2019)
Annealing strategies for enhancing mechanical properties of additively manufactured 316L stainless steel deposited by cold spray
Shuo Yin et al.
SURFACE & COATINGS TECHNOLOGY (2019)
The sliding wear behaviour of CoCrFeMnNi and AlxCoCrFeNi high entropy alloys at elevated temperatures
Jithin Joseph et al.
WEAR (2019)
Process-Structure-Property Relationships of AISI H13 Tool Steel Processed with Selective Laser Melting
Morteza Narvan et al.
MATERIALS (2019)
Towards a high strength aluminium alloy development methodology for selective laser melting
Qingbo Jia et al.
MATERIALS & DESIGN (2019)
High-entropy alloys
Easo P. George et al.
NATURE REVIEWS MATERIALS (2019)
On the unusual intergranular corrosion resistance of 316L stainless steel additively manufactured by selective laser melting
Majid Laleh et al.
CORROSION SCIENCE (2019)
Towards predicting differences in fatigue performance of laser powder bed fused Ti-6Al-4V coupons from the same build
P. Li et al.
INTERNATIONAL JOURNAL OF FATIGUE (2019)
Abnormal corrosion behavior of selective laser melted AlSi10Mg alloy induced by heat treatment at 300 °C
Xinhui Gu et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2019)
Effect of post heat-treatment on the microstructure and mechanical properties of Hastelloy-X structures manufactured by laser based Directed Energy Deposition
A. N. Jinoop et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2019)
Effect of cyclic heat treatment on commercially pure titanium part fabricated by electron beam additive manufacturing
Hyung-Ki Park et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2019)
Microstructure and property of a selective laser melting process induced oxide dispersion strengthened 17-4 PH stainless steel
Tzu-Hou Hsu et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2019)
Selective laser melting of Ti-5Al-2.5Sn alloy with isotropic tensile properties: The combined effect of densification state, microstructural morphology, and crystallographic orientation characteristics
Kaiwen Wei et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2019)
Static coarsening behaviour of lamellar microstructure in selective laser melted Ti-6Al-4V
Sheng Cao et al.
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2019)
Microstructural effects on the tensile and fracture behavior of selective laser melted H13 tool steel under varying conditions
Jungsub Lee et al.
MATERIALS CHARACTERIZATION (2019)
Microstructure and mechanical properties of TOP-TIG-wire and arc additive manufactured super duplex stainless steel (ER2594)
Xiaoyong Zhang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)
Creep properties of single crystal Ni-base superalloys (SX): A comparison between conventionally cast and additive manufactured CMSX-4 materials
D. Buerger et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)
Laser Additive Manufacturing using directed energy deposition of Inconel-718 wall structures with tailored characteristics
A. N. Jinoop et al.
VACUUM (2019)
Microstructure-topology relationship effects on the quasi-static and dynamic behavior of additively manufactured lattice structures
Kavan Hazeli et al.
MATERIALS & DESIGN (2019)
Growth and coarsening kinetics of gamma prime precipitates in CMSX-4 under simulated additive manufacturing conditions
Benjamin Wahlmann et al.
ACTA MATERIALIA (2019)
Pitting corrosion of SLM Inconel 718 sample under surface and heat treatments
Baicheng Zhang et al.
APPLIED SURFACE SCIENCE (2019)
Comparison of Atmospheric Corrosion of Additively Manufactured and Cast Al-10Si-Mg Over a Range of Heat Treatments
Gregory W. Kubacki et al.
CORROSION (2019)
Selective laser melting of the hard-to-weld IN738LC superalloy: Efforts to mitigate defects and the resultant microstructural and mechanical properties
H. Wang et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2019)
Microstructure and mechanical properties of as-deposited and heat treated Ti-5Al-5Mo-5V-3Cr-1Zr (Ti-55531) alloy fabricated by laser melting deposition
Hao Deng et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2019)
The Effect of Different Annealing Conditions on the Anisotropy of the Fracture Toughness of Ti-6Al-4V
Alfredo Gutierrez et al.
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2019)
Tuning element distribution, structure and properties by composition in high-entropy alloys
Qingqing Ding et al.
NATURE (2019)
Globularization using heat treatment in additively manufactured Ti-6Al-4V for high strength and toughness
Rushikesh Sabban et al.
ACTA MATERIALIA (2019)
Selective Laser Melting of Duplex Stainless Steel 2205: Effect of Post-Processing Heat Treatment on Microstructure, Mechanical Properties, and Corrosion Resistance
Suvi Papula et al.
MATERIALS (2019)
Microstructure and Mechanical Properties of AlSi7Mg0.6 Aluminum Alloy Fabricated by Wire and Arc Additive Manufacturing Based on Cold Metal Transfer (WAAM-CMT)
Qingfeng Yang et al.
MATERIALS (2019)
Laser Powder Bed Fusion of Inconel 718: Residual Stress Analysis Before and After Heat Treatment
Rafael Barros et al.
METALS (2019)
Comparison of the Microstructure and Biocorrosion Properties of Additively Manufactured and Conventionally Fabricated near β Ti-25Nb-3Zr-3Mo-2Sn Alloy
Matthew S. Dargusch et al.
ACS BIOMATERIALS SCIENCE & ENGINEERING (2019)
Improved plasticity of Inconel 718 superalloy fabricated by selective laser melting through a novel heat treatment process
X. Li et al.
MATERIALS & DESIGN (2019)
Microstructures and properties of an equimolar AlCoCrFeNi high entropy alloy printed by selective laser melting
P. D. Niu et al.
INTERMETALLICS (2019)
Effect of Post-heat Treatment on the Corrosion Behavior of AlSi10Mg Alloy Produced by Additive Manufacturing
Amit Zakay et al.
JOM (2019)
Laser additive manufacturing of FeCrCoMnNi high-entropy alloy: Effect of heat treatment on microstructure, residual stress and mechanical property
Zhaopeng Tong et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2019)
Effect of Different Post-treatments on the Microstructure of EBM-Built Alloy 718
Sneha Goel et al.
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2019)
Radiation damage and irradiation-assisted stress corrosion cracking of additively manufactured 316L stainless steels
Miao Song et al.
JOURNAL OF NUCLEAR MATERIALS (2019)
Microstructural influence on fatigue crack propagation during high cycle fatigue testing of additively manufactured Alloy 718
Arun Ramanathan Balachandramurthi et al.
MATERIALS CHARACTERIZATION (2019)
AlCoCuFeNi high-entropy alloy with tailored microstructure and outstanding compressive properties fabricated via selective laser melting with heat treatment
Mina Zhang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)
Mechanism of high yield strength and yield ratio of 316 L stainless steel by additive manufacturing
Y. J. Yin et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)
Effects of annealing on the microstructure and mechanical properties of selective laser melted AlSi7Mg alloy
Min Wang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)
Study of heat treatment parameters for additively manufactured AlSi10Mg in comparison with corresponding cast alloy
Luca Girelli et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)
Al0.5FeCoCrNi high entropy alloy prepared by selective laser melting with gas-atomized pre-alloy powders
P. F. Zhou et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)
Laser beam melting and heat-treatment of 1.2343 (AISI H11) tool steel - microstructure and mechanical properties
Florian Huber et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)
High-Temperature Properties and Microstructural Stability of the AISI H13 Hot-Work Tool Steel Processed by Selective Laser Melting
Mei Wang et al.
METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE (2019)
Microstructure and Properties of Novel Heat Resistant Al-Ce-Cu Alloy for Additive Manufacturing
D. R. Manca et al.
METALS AND MATERIALS INTERNATIONAL (2019)
Microstructure and tensile property of a novel AlZnMgScZr alloy additively manufactured by gas atomization and laser powder bed fusion
Le Zhou et al.
SCRIPTA MATERIALIA (2019)
Additive manufacturing of ultrafine-grained high-strength titanium alloys
Duyao Zhang et al.
NATURE (2019)
Resemblance in Corrosion Behavior of Selective Laser Melted and Traditional Monolithic β Ti-24Nb-4Zr-8Sn Alloy
Peng Qin et al.
ACS BIOMATERIALS SCIENCE & ENGINEERING (2019)
Additively manufactured CoCrFeNiMn high-entropy alloy via pre-alloyed powder
Pan Wang et al.
MATERIALS & DESIGN (2019)
The influence of Laves phases on the room temperature tensile properties of Inconel 718 fabricated by powder feeding laser additive manufacturing
Shang Sui et al.
ACTA MATERIALIA (2019)
The effects of stress relieving heat treatment on the microstructure and residual stress of Inconel 718 fabricated by laser metal powder bed fusion additive manufacturing process
Xiaoqing Wang et al.
JOURNAL OF MANUFACTURING PROCESSES (2019)
Cracking mechanism and susceptibility of laser melting deposited Inconel 738 superalloy
Xiaoqiang Zhang et al.
MATERIALS & DESIGN (2019)
Solute clustering and supersaturated solid solution of AlSi10Mg alloy fabricated by selective laser melting
Takashi Maeshima et al.
HELIYON (2019)
Microstructural and small-scale characterization of additive manufactured AlSi10Mg alloy
F. Alghamdi et al.
SN APPLIED SCIENCES (2019)
A digital twin for rapid qualification of 3D printed metallic components
T. Mukherjee et al.
APPLIED MATERIALS TODAY (2019)
Abnormal grain growth in commercially pure titanium during additive manufacturing with electron beam melting
Kenta Yamanaka et al.
MATERIALIA (2019)
Microstructure evolution of Inconel 738 fabricated by pulsed laser powder bed fusion
Jose Alberto Muniz-Lerma et al.
PROGRESS IN ADDITIVE MANUFACTURING (2019)
Transformation-induced plasticity and high strength in beta titanium alloy manufactured by selective laser melting
Y. J. Liu et al.
MATERIALIA (2019)
Microstructure and corrosion evolution of additively manufactured aluminium alloy AA7075 as a function of ageing
Oumaima Gharbi et al.
NPJ MATERIALS DEGRADATION (2019)
Microstructural evolution and mechanical properties of maraging steel produced by wire plus arc additive manufacture process
Xiangfang Xu et al.
MATERIALS CHARACTERIZATION (2018)
Additively manufactured hierarchical stainless steels with high strength and ductility
Y. Morris Wang et al.
NATURE MATERIALS (2018)
Effect of heat treatment on the microstructural evolution of a nickel-based superalloy additive-manufactured by laser powder bed fusion
Fan Zhang et al.
ACTA MATERIALIA (2018)
Microstructure and mechanical properties of Al-Mg-Zr alloys processed by selective laser melting
Joseph R. Croteau et al.
ACTA MATERIALIA (2018)
Additive manufacturing (3D printing): A review of materials, methods, applications and challenges
Tuan D. Ngo et al.
COMPOSITES PART B-ENGINEERING (2018)
Unexpected Interface Corrosion and Sensitization Susceptibility in Additively Manufactured Austenitic Stainless Steel
D. A. Macatangay et al.
CORROSION (2018)
High temperature oxidation of IN 718 manufactured by laser beam melting and electron beam melting: Effect of surface topography
Tom Sanviemvongsak et al.
CORROSION SCIENCE (2018)
The anisotropic corrosion behaviour of wire arc additive manufactured Ti-6A1-4V alloy in 3.5% NaCl solution
Bintao Wu et al.
CORROSION SCIENCE (2018)
Heat treatment effect on the microstructure and corrosion behavior of 316L stainless steel fabricated by selective laser melting for proton exchange membrane fuel cells
Decheng Kong et al.
ELECTROCHIMICA ACTA (2018)
Effect of heat treatments on fatigue property of selective laser melting AlSi10Mg
Changchun Zhang et al.
INTERNATIONAL JOURNAL OF FATIGUE (2018)
Effect of primary a phase on the fatigue crack path of laser melting deposited Ti-5Al-5Mo-5V-1Cr-1Fe near beta titanium alloy
Wang Kai et al.
INTERNATIONAL JOURNAL OF FATIGUE (2018)
Anomalous Annealing Response of Directed Energy Deposited Type 304L Austenitic Stainless Steel
Thale R. Smith et al.
JOM (2018)
A Review of the Fatigue Properties of Additively Manufactured Ti-6Al-4V
Fei Cao et al.
JOM (2018)
Regain the fatigue strength of laser additive manufactured Ti alloy via laser shock peening
Sihai Luo et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2018)
Distinction of corrosion resistance of selective laser melted Al-12Si alloy on different planes
Yang Chen et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2018)
Effect of solution heat treatment on the microstructure and mechanical properties of Inconel 625 superalloy fabricated by laser solid forming
Y. L. Hu et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2018)
Heat treatments effects on functionalization and corrosion behavior of Ti-6Al-4V ELI alloy made by additive manufacturing
Guilherme Arthur Longhitano et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2018)
Hot workability and microstructure evolution of the nickel-based superalloy Inconel 718 produced by laser metal deposition
Markus Bambach et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2018)
General investigations on processing tool steel X40CrMoV5-1 with selective laser melting
Julian Krell et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2018)
A comparative study on corrosion and microstructure of direct metal laser sintered AlSi10Mg_200C and die cast A360.1 aluminum
Parisa Fathi et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2018)
Creep behaviour of inconel 718 processed by laser powder bed fusion
Zhengkai Xu et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2018)
Oxide inclusions in laser additive manufactured stainless steel and their effects on impact toughness and stress corrosion cracking behavior
Xiaoyuan Lou et al.
JOURNAL OF NUCLEAR MATERIALS (2018)
Role of Si in the Anodizing Behavior of Al-Si Alloys: Additive Manufactured and Cast Al-Si10-Mg
Reynier I. Revilla et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2018)
Effect of laser rescanning on the grain microstructure of a selective laser melted Al-Mg-Zr alloy
S. Griffiths et al.
MATERIALS CHARACTERIZATION (2018)
Microstructure, precipitates and hardness of selectively laser melted AlSi10Mg alloy before and after heat treatment
Le Zhou et al.
MATERIALS CHARACTERIZATION (2018)
Microstructure and mechanical behavior of hot-work tool steels processed by Selective Laser Melting
Riccardo Casati et al.
MATERIALS CHARACTERIZATION (2018)
Investigations of gamma ', gamma '' and delta precipitates in heat-treated Inconel 718 alloy fabricated by selective laser melting
G. H. Cao et al.
MATERIALS CHARACTERIZATION (2018)
A novel approach to direct preparation of complete lath martensite microstructure in tool steel by selective laser melting
Hongyu Chen et al.
MATERIALS LETTERS (2018)
Microstructure and properties of novel AlSi11CuMn alloy manufactured by selective laser melting
A. V. Pozdniakov et al.
MATERIALS LETTERS (2018)
Phase evolution of a heat-treatable aluminum alloy during laser additive manufacturing
Jing Li et al.
MATERIALS LETTERS (2018)
Effects of different heat treatments on the dynamic shear response and shear localization in Inconel 718 alloy
Wei-dong Song et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)
Effect of heat treatment on microstructure, mechanical and corrosion properties of austenitic stainless steel 316L using arc additive manufacturing
Xiaohui Chen et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)
Identifying strain localization and dislocation processes in fatigued Inconel 718 manufactured from selective laser melting
Yung Suk Jeremy Yoo et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)
Effect of platform temperature on the porosity, microstructure and mechanical properties of an Al-Mg-Sc-Zr alloy fabricated by selective laser melting
Yunjia Shi et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)
Laser powder bed fusion of Hastelloy X: Effects of hot isostatic pressing and the hot cracking mechanism
Quanquan Han et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)
Correlation of mechanical properties to microstructure in Metal Laser Sintering Inconel 718
Bryton Farber et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)
Heat treatment effect on the mechanical properties and fracture mechanism in AlSi10Mg fabricated by additive manufacturing selective laser melting process
I Rosenthal et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)
Microstructure and mechanical properties of Inconel 718 produced by selective laser melting: Sample orientation dependence and effects of post heat treatments
Dunyong Deng et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)
Influence of process parameters and heat treatments on the microstructures and dynamic mechanical behaviors of Inconel 718 superalloy manufactured by laser metal deposition
Kangbo Yuan et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)
Electron beam melting of Inconel 718: effects of processing and post-processing
Peeyush Nandwana et al.
MATERIALS SCIENCE AND TECHNOLOGY (2018)
High Strength and Ductility of Additively Manufactured 316L Stainless Steel Explained
Md. Shamsujjoha et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2018)
Microstructure and Mechanical Properties of CMSX-4 Single Crystals Prepared by Additive Manufacturing
C. Koerner et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2018)
Characterization of Ni-Based Superalloy Built by Selective Laser Melting and Electron Beam Melting
Yen-Ling Kuo et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2018)
Additive Manufacturing of Powdery Ni-Based Superalloys Mar-M-247 and CM 247 LC in Hybrid Laser Metal Deposition
Andre Seidel et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2018)
Effects of particle characteristics on the microstructure and mechanical properties of 17-4 PH stainless steel fabricated by laser-powder bed fusion
Harish Irrinki et al.
POWDER TECHNOLOGY (2018)
Additive manufacturing of metallic components - Process, structure and properties
T. DebRoy et al.
PROGRESS IN MATERIALS SCIENCE (2018)
Characterization of nano-scale oxides in austenitic stainless steel processed by powder bed fusion
Fuyao Yan et al.
SCRIPTA MATERIALIA (2018)
Precipitation and dissolution of δ and γ during heat treatment of a laser powder-bed fusion produced Ni-based superalloy
Eric A. Lass et al.
SCRIPTA MATERIALIA (2018)
Influence of heat treatments on microstructure and mechanical properties of laser additive manufacturing Ti-5Al-2Sn-2Zr-4Mo-4Cr titanium alloy
Yan-yan Zhu et al.
TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA (2018)
Heat-induced molten pool boundary softening behavior and its effect on tensile properties of laser additive manufactured aluminum alloy
Donghua Dai et al.
VACUUM (2018)
Investigation of cavitation erosion resistance of AlSi10Mg alloy for additive manufacturing
Luca Girelli et al.
WEAR (2018)
Selective laser melting of AlSi10Mg alloy: influence of heat treatment condition on mechanical properties and microstructure
A. Iturrioz et al.
WELDING IN THE WORLD (2018)
Energy savings through additive manufacturing: an analysis of selective laser sintering for automotive and aircraft components
Tim Hettesheimer et al.
ENERGY EFFICIENCY (2018)
Corrosion Behavior of Heat-Treated AlSi10Mg Manufactured by Laser Powder Bed Fusion
Marina Cabrini et al.
MATERIALS (2018)
Effects of T2 Heat Treatment on Microstructure and Properties of the Selective Laser Melted Aluminum Alloy Samples
Lianfeng Wang et al.
MATERIALS (2018)
The Effect of Post-Processes on the Microstructure and Creep Properties of Alloy718 Built Up by Selective Laser Melting
Yen-Ling Kuo et al.
MATERIALS (2018)
Simultaneously enhanced strength and ductility for 3D-printed stainless steel 316L by selective laser melting
Zhongji Sun et al.
NPG ASIA MATERIALS (2018)
A comprehensive study on microstructure and tensile behaviour of a selectively laser melted stainless steel
Chunlei Qiu et al.
SCIENTIFIC REPORTS (2018)
Unexpected Interface Corrosion and Sensitization Susceptibility in Additively Manufactured Austenitic Stainless Steel
D. A. Macatangay et al.
CORROSION (2018)
H13-partially stabilized zirconia nanocomposites fabricated by high-energy mechanical milling and selective laser melting
Faraz Deirmina et al.
MATERIALS & DESIGN (2018)
Optimization of selective laser melting parameters and influence of post heat treatment on microstructure and mechanical properties of maraging steel
James Mutua et al.
MATERIALS & DESIGN (2018)
On the fatigue strength enhancement of additive manufactured AlSi10Mg parts by mechanical and thermal post-processing
Sara Bagherifard et al.
MATERIALS & DESIGN (2018)
A critical review of powder-based additive manufacturing of ferrous alloys: Process parameters, microstructure and mechanical properties
Haniyeh Fayazfar et al.
MATERIALS & DESIGN (2018)
Effect of heat treatments on microstructural evolution of additively manufactured and wrought 17-4PH stainless steel
Yu Sun et al.
MATERIALS & DESIGN (2018)
On the corrosion of additively manufactured aluminium alloy AA2024 prepared by selective laser melting
O. Gharbi et al.
CORROSION SCIENCE (2018)
Defect analysis and fatigue design basis for Ni-based superalloy 718 manufactured by selective laser melting
Yoichi Yamashita et al.
INTERNATIONAL JOURNAL OF FATIGUE (2018)
Properties of wire plus arc additively manufactured 2024 aluminum alloy with different solution treatment temperature
Zewu Qi et al.
MATERIALS LETTERS (2018)
Effect of laser scanning strategies on texture, physical and mechanical properties of laser sintered maraging steel
Tarun Bhardwaj et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)
Enhancement in mechanical properties of selectively laser-melted AlSi10Mg aluminum alloys by T6-like heat treatment
L. F. Wang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)
Improving the mechanical properties of Al-5Si-1Cu-Mg aluminum alloy produced by laser additive manufacturing with post-process heat treatments
Jing Li et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)
Impact of composition on the heat treatment response of additively manufactured 17-4 PH grade stainless steel
S. D. Meredith et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)
Effects of Selective Laser Melting additive manufacturing parameters of Inconel 718 on porosity, microstructure and mechanical properties
K. Moussaoui et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)
Linking microstructure and processing defects to mechanical properties of selectively laser melted AlSi10Mg alloy
N. O. Larrosa et al.
THEORETICAL AND APPLIED FRACTURE MECHANICS (2018)
Fabrication of Crack-Free Nickel-Based Superalloy Considered Non-Weldable during Laser Powder Bed Fusion
Oscar Sanchez-Mata et al.
MATERIALS (2018)
Microstructure, Solidification Texture, and Thermal Stability of 316 L Stainless Steel Manufactured by Laser Powder Bed Fusion
Pavel Krakhmalev et al.
METALS (2018)
Microstructure evolution and thermal properties of an additively manufactured, solution treatable AlSi10Mg part
Pin Yang et al.
JOURNAL OF MATERIALS RESEARCH (2018)
Investigation of Heat Treatment Strategies for Additively-Manufactured Tools of X37CrMoV5-1
Daniel Junker et al.
METALS (2018)
Influence of Si Content on the Microstructure and Corrosion Behavior of Additive Manufactured Al-Si Alloys
Reynier I. Revilla et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2018)
The Effect of Location and Post-treatment on the Microstructure of EBM-Built Alloy 718
Sneha Goel et al.
PROCEEDINGS OF THE 9TH INTERNATIONAL SYMPOSIUM ON SUPERALLOY 718 & DERIVATIVES: ENERGY, AEROSPACE, AND INDUSTRIAL APPLICATIONS (2018)
Microstructural characterization and properties of selective laser melted maraging steel with different build directions
Chaolin Tan et al.
SCIENCE AND TECHNOLOGY OF ADVANCED MATERIALS (2018)
Surface roughness of Ti-6A1-4V parts obtained by SLM and EBM: Effect on the High Cycle Fatigue life
Bastien Vayssette et al.
7TH INTERNATIONAL CONFERENCE ON FATIGUE DESIGN, FATIGUE DESIGN 2017 (2018)
Effect of Hot Isostatic Pressing and Powder Feedstock on Porosity, Microstructure, and Mechanical Properties of Selective Laser Melted AlSi10Mg
Christopher B. Finfrock et al.
METALLOGRAPHY MICROSTRUCTURE AND ANALYSIS (2018)
Comparison of Microstructure and Mechanical Properties of Scalmalloy (R) Produced by Selective Laser Melting and Laser Metal Deposition
Mustafa Awd et al.
MATERIALS (2018)
Local Corrosion Behavior of Additive Manufactured AlSiMg Alloy Assessed by SEM and SKPFM
Reynier I. Revilla et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2017)
Effect of different heat treatments on the microstructure and mechanical properties in selective laser melted INCONEL 718 alloy
S. Raghavan et al.
MATERIALS AND MANUFACTURING PROCESSES (2017)
Comparison of Maraging Steel Micro- and Nanostructure Produced Conventionally and by Laser Additive Manufacturing
Eric A. Jaegle et al.
MATERIALS (2017)
Laser additive manufactured Ti-6Al-4V alloy: tribology and corrosion studies
P. Chandramohan et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2017)
Effects of building orientation and heat treatment on fatigue behavior of selective laser melted 17-4 PH stainless steel
Aref Yadollahi et al.
INTERNATIONAL JOURNAL OF FATIGUE (2017)
Fatigue properties of a titanium alloy (Ti-6Al-4V) fabricated via electron beam melting (EBM): Effects of internal defects and residual stress
Nikolas Hrabe et al.
INTERNATIONAL JOURNAL OF FATIGUE (2017)
Very high cycle fatigue and fatigue crack propagation behavior of selective laser melted AlSi12 alloy
Shafaqat Siddique et al.
INTERNATIONAL JOURNAL OF FATIGUE (2017)
Effect of anisotropy and texture on the low cycle fatigue behavior of Inconel 718 processed via electron beam melting
M. M. Kirka et al.
INTERNATIONAL JOURNAL OF FATIGUE (2017)
Additive manufacturing of fatigue resistant materials: Challenges and opportunities
Aref Yadollahi et al.
INTERNATIONAL JOURNAL OF FATIGUE (2017)
Selective laser melting of Al-Zn-Mg-Cu: Heat treatment, microstructure and mechanical properties
P. Wang et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2017)
Low temperature annealing dedicated to AlSi10Mg selective laser melting products
J. Fiocchi et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2017)
Formation of metastable cellular microstructures in selective laser melted alloys
K. G. Prashanth et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2017)
Tensile, fracture, and fatigue crack growth properties of a 3D printed maraging steel through selective laser melting
Jyoti Suryawanshi et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2017)
Effect of selective laser melting (SLM) process parameters on microstructure and mechanical properties of 316L austenitic stainless steel
E. Liverani et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2017)
Selective laser melting of H13: microstructure and residual stress
J. J. Yan et al.
JOURNAL OF MATERIALS SCIENCE (2017)
On The Corrosion and Metastable Pitting Characteristics of 316L Stainless Steel Produced by Selective Laser Melting
G. Sander et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2017)
Galvanostatic Anodizing of Additive Manufactured Al-Si10-Mg Alloy
Reynier I. Revilla et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2017)
Heat Treatment Degrading the Corrosion Resistance of Selective Laser Melted Ti-6Al-4V Alloy
Nianwei Dai et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2017)
Effect of Heat Treatment on Microstructure and Mechanical Properties of A380 Aluminum Alloy Deposited by Cold Spray
Xiang Qiu et al.
JOURNAL OF THERMAL SPRAY TECHNOLOGY (2017)
Characterization of the microstructure of a selective laser melting processed Al-50Si alloy: Effect of heat treatments
Nan Kang et al.
MATERIALS CHARACTERIZATION (2017)
CoCrFeNiTi-based high-entropy alloy with superior tensile strength and corrosion resistance achieved by a combination of additive manufacturing using selective electron beam melting and solution treatment
Tadashi Fujieda et al.
MATERIALS LETTERS (2017)
Corrosion resistance characteristics of a Ti-6Al-4V alloy scaffold that is fabricated by electron beam melting and selective laser melting for implantation in vivo
Bingjing Zhao et al.
MATERIALS SCIENCE AND ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2017)
Brittle fracture behavior of a laser additive manufactured near-β titanium alloy after low temperature aging
Bei He et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)
Effect of solution heat treatment on the precipitation behavior and strengthening mechanisms of electron beam smelted Inconel 718 superalloy
Xiaogang You et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)
Mechanical behavior of selective laser melted 316L stainless steel
Jyoti Suryawanshi et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)
Influence mechanism of parameters process and mechanical properties evolution mechanism of maraging steel 300 by selective laser melting
Yuchao Bai et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)
Change in microstructure of selectively laser melted AlSi10Mg alloy with heat treatments
Naoki Takata et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)
Fatigue of AlSi10Mg specimens fabricated by additive manufacturing selective laser melting (AM-SLM)
Naor Elad Uzan et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)
Quantitative relationship between anisotropic strain to failure and grain morphology in additively manufactured Ti-6A1-4V
Alexander E. Wilson-Reid et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)
Microstructure and mechanical properties of the austenitic stainless steel 316L fabricated by gas metal arc additive manufacturing
Xiaohui Chen et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)
Microstructure and composition homogeneity, tensile property, and underlying thermal physical mechanism of selective laser melting tool steel parts
Hongyu Chen et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)
Microstructure and anisotropic manufactured Inconel 718 and effects of post heat treatments
Dunyong Deng et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)
Effects of heat treatments on microstructure and properties of Ti-6Al-4V ELI alloy fabricated by electron beam melting (EBM)
Haize Galarraga et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)
Microstructure and hardness studies of Inconel 718 manufactured by selective laser melting before and after solution heat treatment
Wakshum M. Tucho et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)
Effects of hot isostatic pressing on the elastic modulus and tensile properties of 316L parts made by powder bed laser fusion
N. P. Lavery et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)
A comparison on metallurgical behaviors of 316L stainless steel by selective laser melting and laser cladding deposition
Mingming Ma et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)
Mechanical behavior of post-processed Inconel 718 manufactured through the electron beam melting process
Michael M. Kirka et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)
Comparative study of commercially pure titanium produced by laser engineered net shaping, selective laser melting and casting processes
Hooyar Attar et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)
Microstructure evolution characteristics of Inconel 625 alloy from selective laser melting to heat treatment
C. Li et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)
Corrosion Behavior of Additive Manufactured Ti-6Al-4V Alloy in NaCl Solution
Jingjing Yang et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2017)
Formation of the Ni3Nb δ-Phase in Stress-Relieved Inconel 625 Produced via Laser Powder-Bed Fusion Additive Manufacturing
Eric A. Lass et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2017)
3D printing of high-strength aluminium alloys
John H. Martin et al.
NATURE (2017)
Selective laser melting of a novel Sc and Zr modified Al-6.2 Mg alloy: Processing, microstructure, and properties
Ruidi Li et al.
POWDER TECHNOLOGY (2017)
Additive manufacturing of metals: a brief review of the characteristic microstructures and properties of steels, Ti-6Al-4V and high-entropy alloys
Stephane Gorsse et al.
SCIENCE AND TECHNOLOGY OF ADVANCED MATERIALS (2017)
On the enhanced corrosion resistance of a selective laser melted austenitic stainless steel
Qi Chao et al.
SCRIPTA MATERIALIA (2017)
Strength and strain hardening of a selective laser melted AlSi10Mg alloy
B. Chen et al.
SCRIPTA MATERIALIA (2017)
Material properties of CMT-metal additive manufactured duplex stainless steel blade-like geometries
Gerhard Posch et al.
WELDING IN THE WORLD (2017)
Structure, Texture and Phases in 3D Printed IN718 Alloy Subjected to Homogenization and HIP Treatments
Ahmad Mostafa et al.
METALS (2017)
3D Laser Shock Peening - A new method for the 3D control of residual stresses in Selective Laser Melting
Nikola Kalentics et al.
MATERIALS & DESIGN (2017)
Duplex stainless steel fabricated by selective laser melting - Microstructural and mechanical properties
Florian Hengsbach et al.
MATERIALS & DESIGN (2017)
Microstructural evolution, nanoprecipitation behavior and mechanical properties of selective laser melted high-performance grade 300 maraging steel
Chaolin Tan et al.
MATERIALS & DESIGN (2017)
Selective laser melting of Al7050 powder: Melting mode transition and comparison of the characteristics between the keyhole and conduction mode
Ting Qi et al.
MATERIALS & DESIGN (2017)
The effect of interdendritic δ phase on the mechanical properties of Alloy 718 built up by additive manufacturing
Yen-Ling Kuo et al.
MATERIALS & DESIGN (2017)
Processing of Ti-5553 with improved mechanical properties via an in-situ heat treatment combining selective laser melting and substrate plate heating
Holger Schwab et al.
MATERIALS & DESIGN (2017)
Effect of scan pattern on the microstructure and mechanical properties of Powder Bed Fusion additive manufactured 17-4 stainless steel
Andelle Kudzal et al.
MATERIALS & DESIGN (2017)
Residual stress mapping in Inconel 625 fabricated through additive manufacturing: Method for neutron diffraction measurements to validate thermomechanical model predictions
Zhuqing Wang et al.
MATERIALS & DESIGN (2017)
Impact of heat treatment on mechanical behaviour of Inconel 718 processed with tailored microstructure by selective laser melting
V. A. Popovich et al.
MATERIALS & DESIGN (2017)
History of residual stresses during the production phases of AlSi10Mg parts processed by powder bed additive manufacturing technology
Alessandro Salmi et al.
VIRTUAL AND PHYSICAL PROTOTYPING (2017)
Grain Structure Control of Additively Manufactured Metallic Materials
Fuyao Yan et al.
MATERIALS (2017)
On the stress corrosion crack growth behaviour in high temperature water of 316L stainless steel made by laser powder bed fusion additive manufacturing
Xiaoyuan Lou et al.
CORROSION SCIENCE (2017)
Structure/property (constitutive and spallation response) of additively manufactured 316L stainless steel
G. T. Gray et al.
ACTA MATERIALIA (2017)
Improved corrosion behaviour of electron beam melted Ti-6Al-4V alloy in phosphate buffered saline
Yun Bai et al.
CORROSION SCIENCE (2017)
Microstructure and deformation behavior of Ti-6A1-4V alloy by high-power laser solid forming
Y. M. Ren et al.
ACTA MATERIALIA (2017)
Massive nanoprecipitation in an Fe-19Ni-xAl maraging steel triggered by the intrinsic heat treatment during laser metal deposition
Philipp Kuernsteiner et al.
ACTA MATERIALIA (2017)
Additive Manufacturing: Reproducibility of Metallic Parts
Konda Gokuldoss Prashanth et al.
TECHNOLOGIES (2017)
Evaluation of an Al-Ce alloy for laser additive manufacturing
A. Plotkowski et al.
ACTA MATERIALIA (2017)
Additive Manufacturing of 17-4 PH Stainless Steel: Post-processing Heat Treatment to Achieve Uniform Reproducible Microstructure
Sudha Cheruvathur et al.
JOM (2016)
Microstructure and strength of selectively laser melted AlSi10Mg
J. Wu et al.
ACTA MATERIALIA (2016)
Additive manufacturing of metals
Dirk Herzog et al.
ACTA MATERIALIA (2016)
Microstructural Control of Additively Manufactured Metallic Materials
P. C. Collins et al.
ANNUAL REVIEW OF MATERIALS RESEARCH, VOL 46 (2016)
Metal Additive Manufacturing: A Review of Mechanical Properties
John J. Lewandowski et al.
ANNUAL REVIEW OF MATERIALS RESEARCH, VOL 46 (2016)
Topological design and additive manufacturing of porous metals for bone scaffolds and orthopaedic implants: A review
Xiaojian Wang et al.
BIOMATERIALS (2016)
Microstructure and mechanical properties of as-processed scandium-modified aluminium using selective laser melting
Adriaan B. Spierings et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2016)
Corrosion behavior of selective laser melted Ti-6Al-4V alloy in NaCl solution
Nianwei Dai et al.
CORROSION SCIENCE (2016)
Distinction in corrosion resistance of selective laser melted Ti-6Al-4V alloy on different planes
Nianwei Dai et al.
CORROSION SCIENCE (2016)
Effect of heat treatment on corrosion resistance of DMLS AlSi10Mg alloy
M. Cabrini et al.
ELECTROCHIMICA ACTA (2016)
Microstructure, static properties, and fatigue crack growth mechanisms in Ti-6Al-4V fabricated by additive manufacturing: LENS and EBM
Yuwei Zhai et al.
ENGINEERING FAILURE ANALYSIS (2016)
Influence of the build orientation on the fatigue strength of EOS maraging steel produced by additive metal machine
D. Croccolo et al.
FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES (2016)
The ultrahigh charpy impact toughness of forged AlxCoCrFeNi high entropy alloys at room and cryogenic temperatures
DongYue Li et al.
INTERMETALLICS (2016)
Critical assessment of the fatigue performance of additively manufactured Ti-6Al-4V and perspective for future research
P. Li et al.
INTERNATIONAL JOURNAL OF FATIGUE (2016)
Additive manufacturing of metallic components by selective electron beam melting - a review
C. Koerner
INTERNATIONAL MATERIALS REVIEWS (2016)
The metallurgy and processing science of metal additive manufacturing
W. J. Sames et al.
INTERNATIONAL MATERIALS REVIEWS (2016)
Microstructure Development in Electron Beam-Melted Inconel 718 and Associated Tensile Properties
M. M. Kirka et al.
JOM (2016)
Precipitation Reactions in Age-Hardenable Alloys During Laser Additive Manufacturing
Eric A. Jaegle et al.
JOM (2016)
Oxidation behavior of arc melted AlCoCrFeNi multi-component high-entropy alloys
Todd M. Butler et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2016)
Microstructure and phase formation in Al-20Si-5Fe-3Cu-1Mg synthesized by selective laser melting
Pan Ma et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2016)
Changing the alloy composition of A17075 for better processability by selective laser melting
Maria L. Montero Sistiaga et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2016)
Evaluation of corrosion resistance of Al-10Si-Mg alloy obtained by means of Direct Metal Laser Sintering
Marina Cabrini et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2016)
Finite-element analysis and experimental validation of thermal residual stress and distortion in electron beam additive manufactured Ti-6Al-4V build plates
Jun Cao et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2016)
On the formation of A1Si10Mg single tracks and layers in selective laser melting: Microstructure and nano-mechanical properties
Nesma T. Aboulkhair et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2016)
Intragranular cellular segregation network structure strengthening 316L stainless steel prepared by selective laser melting
Yuan Zhong et al.
JOURNAL OF NUCLEAR MATERIALS (2016)
The effectiveness of combining rolling deformation with Wire-Arc Additive Manufacture on β-grain refinement and texture modification in Ti-6Al-4V
J. Donoghue et al.
MATERIALS CHARACTERIZATION (2016)
Fatigue behavior and failure mechanisms of direct laser deposited Ti-6Al-4V
Amanda J. Sterling et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2016)
Influence of microstructure on mechanical properties of laser metal wire-deposited Ti-6Al-4V
Pia Akerfeldt et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2016)
On the microstructural and mechanical properties of post-treated additively manufactured Inconel 718 superalloy under quasi-static and cyclic loading
M. E. Aydinoez et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2016)
Novel ferritic stainless steel formed by laser melting from duplex stainless steel powder with advanced mechanical properties and high ductility
K. Saeidi et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2016)
Grain structure evolution in Inconel 718 during selective electron beam melting
H. Helmer et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2016)
Effect of heat treatment on AlSi10Mg alloy fabricated by selective laser melting: Microstructure evolution, mechanical properties and fracture mechanism
Wei Li et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2016)
The microstructure, mechanical properties and corrosion resistance of 316 L stainless steel fabricated using laser engineered net shaping
Michal Zietala et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2016)
Selective laser melting of high strength Al-Cu-Mg alloys: Processing, microstructure and mechanical properties
Hu Zhang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2016)
Microstructure and anisotropic tensile behavior of laser additive manufactured TC21 titanium alloy
Qiang Zhang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2016)
Diffraction and single-crystal elastic constants of Inconel 625 at room and elevated temperatures determined by neutron diffraction
Zhuqing Wang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2016)
The microstructure and mechanical properties of selectively laser melted AlSi10Mg: The effect of a conventional T6-like heat treatment
Nesma T. Aboulkhair et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2016)
Beta heat treatment of laser melting deposited high strength near β titanium alloy
Changmeng Liu et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2016)
Relationship between the microstructure and mechanical properties of an equiatomic AlCoCrFeNi high-entropy alloy fabricated by selective electron beam melting
Hiroshi Shiratori et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2016)
Mechanical behavior of additive manufactured, powder-bed laser-fused materials
Todd M. Mower et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2016)
The strengthening effect of inter-layer cold working and post-deposition heat treatment on the additively manufactured Al-6.3Cu alloy
Jianglong Gu et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2016)
High-entropy alloy: challenges and prospects
Y. F. Ye et al.
MATERIALS TODAY (2016)
Additive manufacturing and postprocessing of Ti-6Al-4V for superior mechanical properties
M. Qian et al.
MRS BULLETIN (2016)
Microstructure evolution and mechanical properties of laser additive manufactured Ti-5Al-2Sn-2Zr-4Mo-4Cr alloy
Qiang Zhang et al.
TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA (2016)
Aging Behaviour and Mechanical Performance of 18-Ni 300 Steel Processed by Selective Laser Melting
Riccardo Casati et al.
METALS (2016)
Improving the fatigue behaviour of a selectively laser melted aluminium alloy: Influence of heat treatment and surface quality
Nesma T. Aboulkhair et al.
MATERIALS & DESIGN (2016)
Nitrogen loss and effects on microstructure in multipass TIG welding of a super duplex stainless steel
Vahid A. Hosseini et al.
MATERIALS & DESIGN (2016)
Microstructure and mechanical properties of the near-beta titanium alloy Ti-5553 processed by selective laser melting
H. Schwab et al.
MATERIALS & DESIGN (2016)
Formation and control of martensite in Ti-6Al-4V alloy produced by selective laser melting
Jingjing Yang et al.
MATERIALS & DESIGN (2016)
Investigation of crystal growth mechanism during selective laser melting and mechanical property characterization of 316L stainless steel parts
Di Wang et al.
MATERIALS & DESIGN (2016)
Microstructures and mechanical properties of A356 (AlSi7Mg0.3) aluminum alloy fabricated by selective laser melting
Takahiro Kimura et al.
MATERIALS & DESIGN (2016)
Selective Laser Melting of Duplex Stainless Steel Powders: An Investigation
Karl Davidson et al.
MATERIALS AND MANUFACTURING PROCESSES (2016)
A novel processing approach for additive manufacturing of commercial aluminum alloys
Christopher E. Roberts et al.
LASER ASSISTED NET SHAPE ENGINEERING 9 INTERNATIONAL CONFERENCE ON PHOTONIC TECHNOLOGIES PROCEEDINGS OF THE LANE 2016 (2016)
A selective laser melting and solution heat treatment refined Al-12Si alloy with a controllable ultrafine eutectic microstructure and 25% tensile ductility
X. P. Li et al.
ACTA MATERIALIA (2015)
Controlling the microstructure and properties of wire arc additive manufactured Ti-6Al-4V with trace boron additions
M. J. Bermingham et al.
ACTA MATERIALIA (2015)
Anisotropic tensile behavior of Ti-6Al-4V components fabricated with directed energy deposition additive manufacturing
Beth E. Carroll et al.
ACTA MATERIALIA (2015)
Additive manufacturing of strong and ductile Ti-6Al-4V by selective laser melting via in situ martensite decomposition
W. Xu et al.
ACTA MATERIALIA (2015)
Solution Heat Treatment of the Single Crystal Nickel-Base Superalloy CMSX-4 Fabricated by Selective Electron Beam Melting
Markus Ramsperger et al.
ADVANCED ENGINEERING MATERIALS (2015)
Fracture toughness and fatigue crack growth in Ti-6Al-4V friction stir welds
P. Edwards et al.
FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES (2015)
Fabrication of large Ti-6Al-4V structures by direct laser deposition
Chunlei Qiu et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2015)
Grain morphology evolution behavior of titanium alloy components during laser melting deposition additive manufacturing
T. Wang et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2015)
Improvement of fatigue resistance and ductility of TiAl6V4 processed by selective laser melting
Galina Kasperovich et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2015)
Influence of process-induced microstructure and imperfections on mechanical properties of AlSi12 processed by selective laser melting
Shafaqat Siddique et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2015)
Selective laser melting of AlSi10Mg alloy: Process optimisation and mechanical properties development
Noriko Read et al.
MATERIALS & DESIGN (2015)
Effect of retained austenite on subsequent thermal processing and resultant mechanical properties of selective laser melted 17-4 PH stainless steel
Tyler LeBrun et al.
MATERIALS & DESIGN (2015)
First demonstration of promising selective electron beam melting method for utilizing high-entropy alloys as engineering materials
Tadashi Fujieda et al.
MATERIALS LETTERS (2015)
Precipitation behavior of aluminum alloy 2139 fabricated using additive manufacturing
Craig Brice et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2015)
Effects of process time interval and heat treatment on the mechanical and microstructural properties of direct laser deposited 316L stainless steel
Aref Yadollahi et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2015)
Effect of standard heat treatment on the microstructure and mechanical properties of selective laser melting manufactured Inconel 718 superalloy
Dongyun Zhang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2015)
Hardened austenite steel with columnar sub-grain structure formed by laser melting
K. Saeidi et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2015)
Comparative study of the microstructures and mechanical properties of direct laser fabricated and arc-melted AlxCoCrFeNi high entropy alloys
Jithin Joseph et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2015)
Effect of heat treatment on the microstructure and mechanical properties of Inconel 718 processed by selective laser melting
E. Chlebus et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2015)
On the Precipitation Hardening of Selective Laser Melted AlSi10Mg
Nesma T. Aboulkhair et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2015)
Comparison of Residual Stresses in Inconel 718 Simple Parts Made by Electron Beam Melting and Direct Laser Metal Sintering
L. M. Sochalski-Kolbus et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2015)
Microstructural Characterization and Mechanical Performance of Hot Work Tool Steel Processed by Selective Laser Melting
Martin Joachim Holzweissig et al.
METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE (2015)
Study on the microstructure, mechanical property and residual stress of SLM Inconel-718 alloy manufactured by differing island scanning strategy
Yanjin Lu et al.
OPTICS AND LASER TECHNOLOGY (2015)
The use of high-entropy alloys in additive manufacturing
Yevgeni Brif et al.
SCRIPTA MATERIALIA (2015)
Influence of defects on mechanical properties of Ti-6Al-4 V components produced by selective laser melting and electron beam melting
Haijun Gong et al.
MATERIALS & DESIGN (2015)
Computed tomography for characterization of fatigue performance of selective laser melted parts
Shafaqat Siddique et al.
MATERIALS & DESIGN (2015)
Microstructure Evolution, Tensile Properties, and Fatigue Damage Mechanisms in Ti-6Al-4V Alloys Fabricated by Two Additive Manufacturing Techniques
Yuwei Zhai et al.
ICSI 2015 THE 1ST INTERNATIONAL CONFERENCE ON STRUCTURAL INTEGRITY FUNCHAL (2015)
Microstructure and mechanical properties of wrought and Additive manufactured Ti-6Al-4V cylindrical bars
Manikandakumar Shunmugavel et al.
PROCEEDINGS OF THE 1ST INTERNATIONAL DESIGN TECHNOLOGY CONFERENCE, DESTECH2015 (2015)
Variant selection and intervariant crystallographic planes distribution in martensite in a Ti-6Al-4V alloy
Hossein Beladi et al.
ACTA MATERIALIA (2014)
On the fatigue crack growth behavior in 316L stainless steel manufactured by selective laser melting
A. Riemer et al.
ENGINEERING FRACTURE MECHANICS (2014)
Selective laser melting additive manufacturing of Inconel 718 superalloy parts: Densification, microstructure and properties
Qingbo Jia et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2014)
Metal Additive Manufacturing: A Review
William E. Frazier
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2014)
Microstructure and Mechanical Behavior of 17-4 Precipitation Hardenable Steel Processed by Selective Laser Melting
H. Khalid Rafi et al.
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2014)
Thermal effects on microstructural heterogeneity of Inconel 718 materials fabricated by electron beam melting
William J. Sames et al.
JOURNAL OF MATERIALS RESEARCH (2014)
On the fatigue properties of metals manufactured by selective laser melting - The role of ductility
Stefan Leuders et al.
JOURNAL OF MATERIALS RESEARCH (2014)
Precipitation and austenite reversion behavior of a maraging steel produced by selective laser melting
Eric A. Jaegle et al.
JOURNAL OF MATERIALS RESEARCH (2014)
Vacuum heat treatment of iron parts produced by selective laser melting: Microstructure, residual stress and tensile behavior
Bo Song et al.
MATERIALS & DESIGN (2014)
Microstructural and texture development in direct laser fabricated IN718
Lakshmi L. Parimi et al.
MATERIALS CHARACTERIZATION (2014)
Fatigue performance evaluation of selective laser melted Ti-6Al-4V
P. Edwards et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2014)
Development of a pre-heat treatment for obtaining discontinuous grain boundary α in laser melting deposited Ti-5Al-5Mo-5V-1Cr-1Fe alloy
C. M. Liu et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2014)
Subtransus triplex heat treatment of laser melting deposited Ti-5Al-5Mo-5V-1Cr-1Fe near β titanium alloy
C. M. Liu et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2014)
The effect of atmosphere on the structure and properties of a selective laser melted Al-12Si alloy
X. J. Wang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2014)
Effect of the build orientation on the mechanical properties and fracture modes of SLM Ti-6A1-4V
M. Simonelli et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2014)
Microstructure and mechanical properties of Al-12Si produced by selective laser melting: Effect of heat treatment
K. G. Prashanth et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2014)
Effect of Fluid Convection on Dendrite Arm Spacing in Laser Deposition
Yousub Lee et al.
METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE (2014)
Microstructures and properties of high-entropy alloys
Yong Zhang et al.
PROGRESS IN MATERIALS SCIENCE (2014)
Influence of Annealing on Mechanical Properties of Al-20Si Processed by Selective Laser Melting
Pan Ma et al.
METALS (2014)
Strong morphological and crystallographic texture and resulting yield strength anisotropy in selective laser melted tantalum
Lore Thijs et al.
ACTA MATERIALIA (2013)
Fine-structured aluminium products with controllable texture by selective laser melting of pre-alloyed AlSi10Mg powder
Lore Thijs et al.
ACTA MATERIALIA (2013)
INVESTIGATIONS ON DISSOLUTION MECHANISM OF LAVES PHASE IN GH4169 ALLOY INGOT BASED ON CLASSICAL DYNAMICAL MODEL
Zhang Maicang et al.
ACTA METALLURGICA SINICA (2013)
On the mechanical behaviour of titanium alloy TiAl6V4 manufactured by selective laser melting: Fatigue resistance and crack growth performance
S. Lenders et al.
INTERNATIONAL JOURNAL OF FATIGUE (2013)
Microstructures and Mechanical Properties of Ti6Al4V Parts Fabricated by Selective Laser Melting and Electron Beam Melting
H. K. Rafi et al.
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2013)
Microstructure and tensile properties of laser melting deposited Ti-5Al-5Mo-5V-1Cr-1Fe near β titanium alloy
C. M. Liu et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2013)
Microstructure and tensile properties of selectively laser-melted and of HIPed laser-melted Ti-6Al-4V
Chunlei Qiu et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2013)
Highly Anisotropic Steel Processed by Selective Laser Melting
Thomas Niendorf et al.
METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE (2013)
Effect of overlap rate on recrystallization behaviors of Laser Solid Formed Inconel 718 superalloy
Jun Cao et al.
OPTICS AND LASER TECHNOLOGY (2013)
Microstructures and Properties of 17-4 PH Stainless Steel Fabricated by Selective Laser Melting
Lawrence E. Murr et al.
Journal of Materials Research and Technology-JMR&T (2013)
Microstructure and properties of selective laser melted high hardness tool steel
F. Feuerhahn et al.
LASERS IN MANUFACTURING (LIM 2013) (2013)
Microstructures and mechanical behavior of Inconel 718 fabricated by selective laser melting
K. N. Amato et al.
ACTA MATERIALIA (2012)
The microstructure and mechanical properties of deposited-IN718 by selective laser melting
Zemin Wang et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2012)
Heat treatment of Ti6Al4V produced by Selective Laser Melting: Microstructure and mechanical properties
Bey Vrancken et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2012)
Studies on pitting corrosion and sensitization in laser rapid manufactured specimens of type 316L stainless steel
P. Ganesh et al.
MATERIALS & DESIGN (2012)
Additive manufactured AlSi10Mg samples using Selective Laser Melting (SLM): Microstructure, high cycle fatigue, and fracture behavior
Erhard Brandl et al.
MATERIALS & DESIGN (2012)
Microstructure of additive layer manufactured Ti-6Al-4V after exceptional post heat treatments
Erhard Brandl et al.
MATERIALS LETTERS (2012)
Microstructural and mechanical approaches of the selective laser melting process applied to a nickel-base superalloy
T. Vilaro et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2012)
Tensile Properties and Microstructures of Laser-Formed Ti-6Al-4V
J. Alcisto et al.
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2011)
Effect of Intermediate Heat Treatment Temperature on Microstructure and Notch Sensitivity of Laser Solid Firmed Inconel 718 Superalloy
Liu Fencheng et al.
JOURNAL OF WUHAN UNIVERSITY OF TECHNOLOGY-MATERIALS SCIENCE EDITION (2011)
Microstructure and mechanical properties of nickel based superalloy IN718 produced by rapid prototyping with electron beam melting (EBM)
A. Strondl et al.
MATERIALS SCIENCE AND TECHNOLOGY (2011)
As-Fabricated and Heat-Treated Microstructures of the Ti-6Al-4V Alloy Processed by Selective Laser Melting
T. Vilaro et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2011)
Microstructure and residual stress of laser rapid formed Inconel 718 nickel-base superalloy
Fencheng Liu et al.
OPTICS AND LASER TECHNOLOGY (2011)
Manufacture by selective laser melting and mechanical behavior of a biomedical Ti-24Nb-4Zr-8Sn alloy
L. C. Zhang et al.
SCRIPTA MATERIALIA (2011)
A study of the micro structural evolution during selective laser melting of Ti-6Al-4V
Lore Thijs et al.
ACTA MATERIALIA (2010)
Metastable Austenite in 17-4 Precipitation-Hardening Stainless Steel Produced by Selective Laser Melting
Luca Facchini et al.
ADVANCED ENGINEERING MATERIALS (2010)
The Origin of Microstructural Diversity, Texture, and Mechanical Properties in Electron Beam Melted Ti-6Al-4V
S. S. Al-Bermani et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2010)
Beryllium as a grain refiner in titanium alloys
M. J. Bermingham et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2009)
Surface modification of AISI 410 stainless steel using laser engineered net shaping (LENS™)
B. Vamsi Krishna et al.
MATERIALS & DESIGN (2009)
Microstructure and mechanical properties of Ti-6Al-4V produced by electron beam melting of pre-alloyed powders
Luca Facchini et al.
RAPID PROTOTYPING JOURNAL (2009)
Formation of an ultrafine-grained structure during equal-channel angular pressing of a beta-titanium alloy with low phase stability
W. Xu et al.
SCRIPTA MATERIALIA (2009)
Grain-refinement mechanisms in titanium alloys
M. J. Bermingham et al.
JOURNAL OF MATERIALS RESEARCH (2008)
Fabrication of Ti-6Al-4V Scaffolds by Direct Metal Deposition
G. P. Dinda et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2008)
Dissolution kinetics of δ phase and its influence on the notch sensitivity of Inconel 718
Dayong Cai et al.
MATERIALS CHARACTERIZATION (2007)
Structural, mechanical and in vitro characterization of individually structured Ti-6Al-4V produced by direct laser forming
DA Hollander et al.
BIOMATERIALS (2006)
Residual stresses in selective laser sintering and selective laser melting
Peter Mercelis et al.
RAPID PROTOTYPING JOURNAL (2006)
Effects of temperature of HIP process on characteristics of Inconel 718 superalloy
S. H. Chang et al.
INTERNATIONAL JOURNAL OF CAST METALS RESEARCH (2006)
Evaluation of HIP pressure on Inconel 718 superalloy
S. H. Chang et al.
INTERNATIONAL JOURNAL OF CAST METALS RESEARCH (2006)
The mechanical and microstructural characteristics of laser-deposited IN718
PL Blackwell
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2005)
Delta phase precipitation in Inconel 718
S Azadian et al.
MATERIALS CHARACTERIZATION (2004)
Effect of grain refinement on thermal stability of metastable austenitic steel
S Takaki et al.
MATERIALS TRANSACTIONS (2004)
Stabilisation of retained austenite in laser surface melted tool steels
R Colaço et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2004)
Mechanical properties in the semi-solid state and hot tearing of aluminium alloys
DG Eskin et al.
PROGRESS IN MATERIALS SCIENCE (2004)
Nanostructured high-entropy alloys with multiple principal elements: Novel alloy design concepts and outcomes
JW Yeh et al.
ADVANCED ENGINEERING MATERIALS (2004)
Effect of self-accommodation on α/α boundary populations in pure titanium
SC Wang et al.
ACTA MATERIALIA (2003)
Optimization of grain boundary character distribution for intergranular corrosion resistant 304 stainless steel by twin-induced grain boundary engineering
M Shimada et al.
ACTA MATERIALIA (2002)
Characterization of the microstructure evolution in a nickel base superalloy during continuous cooling conditions
SS Babu et al.
ACTA MATERIALIA (2001)
The laser additive manufacture of Ti-6Al-4V
PA Kobryn et al.
JOM-JOURNAL OF THE MINERALS METALS & MATERIALS SOCIETY (2001)
Recent development in aluminium alloys for the automotive industry
WS Miller et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2000)
Share Paper
