☆ 4.7 Article

Thermal decomposition kinetics and mechanism investigation of cumene hydroperoxide under inert gas: A novel experimental method

PROCESS SAFETY AND ENVIRONMENTAL PROTECTION (2023)

Related references

Note: Only part of the references are listed.

Article Engineering, Chemical

Thermal runaway behavior and hazard evaluation of cumene hydroperoxide mixed separately with four products under adiabatic conditions coupled with risk matrix method

Chang-Fei Yu et al.

Summary: This study evaluated the thermal hazard of CHP mixed with its products and identified a dangerous reaction decomposition mechanism under runaway conditions. The findings help to better understand the potential thermal hazard of CHP in the presence of products and provide necessary experimental and calculated parameters for the appropriate choice of safe conditions.

PROCESS SAFETY PROGRESS (2022)

Add to Collection

Article Thermodynamics

Thermal decomposition behavior, kinetics, thermal safety and burning characteristics of guanidinium-5-aminotetrazole (GA) based propellants

Chengyang Cao et al.

Summary: In this study, GA was synthesized by mixing 5-AT and guanidine carbonate in heated deionized water, and composite propellants containing GA and various oxidizers were prepared for investigation. The thermal analysis results showed the decomposition of GA propellants had five stages and followed reaction order models. Combining with burning characteristic measurements, GA coupled with Sr(NO3)2 exhibited higher thermal safety and more stable combustion process, showing promise as a substitute for 5-AT based propellants in firefighting applications.

JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY (2021)

Add to Collection

Article Energy & Fuels

Pyrolysis kinetics and determination of organic components and N-alkanes yields of Karamay transformer oil using TG, FTIR and Py-GC/MS analyses

Jiaqing Zhang et al.

Summary: This study investigated the pyrolysis characteristics and kinetics of Karamay transformer oil using various analytical methods. The results showed that the main organic products from the pyrolysis process were n-alkanes, with a higher concentration of alkanes with a higher number of carbon atoms. The apparent activation energy remained relatively constant regardless of the conversion rate, and the dominating volatile product was n-heptadecane (C17).

FUEL (2021)

Add to Collection

Article Engineering, Environmental

Experimental and theoretical study of the effect of typical halides on thermal decomposition products and energy release of ammonium nitrate based on microcalorimetry and FTIR

Hui-Qi Cao et al.

Summary: This study investigates the effect of halide additives on the thermal decomposition products and energy release of ammonium nitrate (AN), finding that different sodium halides alter the thermal decomposition characteristics and reduce the reaction heat, with sodium iodide being beneficial for the safety of large-scale AN storage. The research results offer reference and guidance for understanding the thermal decomposition mechanism of halide-containing AN and simulating the thermal decomposition of AN with additives.

CHEMICAL ENGINEERING JOURNAL (2021)

Add to Collection

Article Thermodynamics

Autocatalytic decomposition properties and thermal decomposition of benzoyl peroxide

Yabei Xu et al.

Summary: The thermal decomposition of benzoyl peroxide (BPO) was studied using differential scanning calorimetry (DSC) and thermogravimetric analyzer (TGA), revealing its autocatalytic properties through mathematical methods and kinetic analysis. Results showed that BPO exhibited autocatalysis in thermal history and isothermal experiments, with the initial decomposition temperature decreasing as interruption temperature increased.

JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY (2021)

Add to Collection

Article Chemistry, Analytical

Interactions of lignin and LDPE during catalytic co-pyrolysis: Thermal behavior and kinetics study by TG-FTIR

Liangliang Tao et al.

Summary: The study found that lignin and hydrogen-rich LDPE have a synergistic effect in catalytic co-pyrolysis, which can lower the pyrolysis starting temperature and accelerate the pyrolysis rate. HZSM-5 catalysis significantly reduces the activation energy of the reaction, shifting the composition of pyrolysis products towards alkanes and aromatics.

JOURNAL OF ANALYTICAL AND APPLIED PYROLYSIS (2021)

Add to Collection

Article Engineering, Chemical

Effectiveness and application of modified wind turbine coating: Adding ionic liquids to titanium dioxide and diatomaceous earth

Bu-Sheng Lee et al.

Summary: Taiwan has been developing wind turbines as a green energy source in the past five years. While onshore wind farms have been established, offshore development is necessary due to limited land area. Ensuring the operation and maintenance of wind farms are crucial for energy sustainability, and using appropriate coatings can significantly reduce costs and improve durability in the harsh working environment. The study uses a modified coating with DE and ionic liquid to enhance thermal stability and corrosion resistance, confirming its applicability to large machinery in offshore wind turbine towers.

JOURNAL OF LOSS PREVENTION IN THE PROCESS INDUSTRIES (2021)

Add to Collection

Article Green & Sustainable Science & Technology

Pyrolysis and gasification kinetic behavior of mango seed shells using TG-FTIR-GC-MS system under N2 and CO2 atmospheres

Samy Yousef et al.

Summary: This study investigates the pyrolysis and gasification behavior of mango seed shells, revealing the formation of volatile products in N2 and CO2 atmospheres. The research demonstrates the range of kinetic parameters for pyrolysis and confirms the feasibility of utilizing pyrolysis and gasification technologies to enhance the value of mango waste as a sustainable source for renewable energy.

RENEWABLE ENERGY (2021)

Add to Collection

Proceedings Paper Materials Science, Multidisciplinary

Thermoanalytical study of nitrones in static air

G. Rajarajan et al.

Summary: The prepared nitrones were characterized by various analytical methods and their decomposition was studied, revealing different mechanisms for nitrones with different substitution patterns. Furthermore, the linear relationship between apparent activation energy and pre-exponential factor was observed in the decomposition process.

MATERIALS TODAY-PROCEEDINGS (2021)

Add to Collection

Article Thermodynamics

Thermal hazardous evaluation of autocatalytic reaction of cumene hydroperoxide alone and mixed with products under isothermal and non-isothermal conditions

Shang-Hao Liu et al.

JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY (2020)

Add to Collection

Article Engineering, Environmental

Interactive effect of the sorted components of solid recovered fuel manufactured from municipal solid waste by thermogravimetric and kinetic analysis

Lei Wu et al.

WASTE MANAGEMENT (2020)

Add to Collection

Review Thermodynamics

A state-of-the-art review on thermochemical conversion of biomass for biofuel production: A TG-FTIR approach

Hwai Chyuan Ong et al.

ENERGY CONVERSION AND MANAGEMENT (2020)

Add to Collection

Article Thermodynamics

Cure kinetics of low-molar-ratio urea-formaldehyde resins reinforced with modified nanoclay using different kinetic analysis methods

Eko Setio Wibowo et al.

THERMOCHIMICA ACTA (2020)

Add to Collection

Article Engineering, Manufacturing

An all-gluten biocomposite: Comparisons with carbon black and pine char composites

Oisik Das et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2019)

Add to Collection

Article Energy & Fuels

Experimental insight into catalytic mechanism of transition metal oxide nanoparticles on combustion of 5-Amino-1H-Tetrazole energetic propellant by multi kinetics methods and TG-FTIR-MS analysis

Dan Zhang et al.

FUEL (2019)

Add to Collection

Article Polymer Science

An Advanced Technique for Linear Low-Density Polyethylene Composition Determination: TGA-IST16-GC-MS Coupling

Olivier Boyron et al.

MACROMOLECULAR CHEMISTRY AND PHYSICS (2019)

Add to Collection

Article Engineering, Environmental

Evaluation for the thermokinetics of the autocatalytic reaction of cumene hydroperoxide mixed with phenol through isothermal approaches and simulations

Chen-Rui Cao et al.

PROCESS SAFETY AND ENVIRONMENTAL PROTECTION (2018)

Add to Collection

Article Chemistry, Analytical

Thermal degradation of medical plastic waste by in-situ FTIR, TG-MS and TG-GC/MS coupled analyses

Linbo Qin et al.

JOURNAL OF ANALYTICAL AND APPLIED PYROLYSIS (2018)

Add to Collection

Article Thermodynamics

A novel TG-GC/MS system

Nicolas Fedelich

JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY (2017)

Add to Collection

Article Thermodynamics

Chemical kinetics on thermal decompositions of cumene hydroperoxide in cumene studied by calorimetry: An overview

Yih-Shing Duh

THERMOCHIMICA ACTA (2016)

Add to Collection

Article Thermodynamics

ICTAC Kinetics Committee recommendations for collecting experimental thermal analysis data for kinetic computations

Sergey Vyazovkin et al.

THERMOCHIMICA ACTA (2014)

Add to Collection

Article Thermodynamics

Runaway reaction and thermal explosion evaluation of cumene hydroperoxide (CHP) in the oxidation process

Sheng-Hung Wu

THERMOCHIMICA ACTA (2013)

Add to Collection

Article Engineering, Chemical

Thermal risk analysis of cumene hydroperoxide in the presence of alkaline catalysts

Hung-Yi Hou et al.

JOURNAL OF LOSS PREVENTION IN THE PROCESS INDUSTRIES (2012)

Add to Collection

Article Engineering, Chemical

Kinetic parameter estimation for decomposition of organic peroxides by means of DSC measurements

I. Ben Talouba et al.

JOURNAL OF LOSS PREVENTION IN THE PROCESS INDUSTRIES (2011)

Add to Collection

Review Thermodynamics

ICTAC Kinetics Committee recommendations for performing kinetic computations on thermal analysis data

Sergey Vyazovkin et al.

THERMOCHIMICA ACTA (2011)

Add to Collection

Article Thermodynamics

Effects of cumene hydroperoxide on phenol and acetone manufacturing by DSC and VSP2

Chun-Chin Huang et al.

JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY (2010)

Add to Collection

Article Thermodynamics

Thermal hazards evaluation of cumene hydroperoxide mixed with its derivatives

J. -J. Peng et al.

JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY (2009)

Add to Collection

Article Chemistry, Physical

Efficient cleavage of cumene hydroperoxide over HUSY zeolites: The role of Bronsted acidity

Konstantin Yu. Koltunov et al.

APPLIED CATALYSIS A-GENERAL (2008)

Add to Collection

Article Engineering, Environmental

Reactions of cumene hydroperoxide mixed with sodium hydroxide

Hung-Yi Hou et al.

JOURNAL OF HAZARDOUS MATERIALS (2008)

Add to Collection

Article Engineering, Chemical

Runaway reaction and thermal hazards simulation of cumene hydroperoxide by DSC

Kun-Yue Chen et al.

JOURNAL OF LOSS PREVENTION IN THE PROCESS INDUSTRIES (2008)

Add to Collection

Article Engineering, Environmental

Kinetics of acid-catalyzed cleavage of cumene hydroperoxide

ME Levin et al.

JOURNAL OF HAZARDOUS MATERIALS (2006)

Add to Collection

Article Engineering, Chemical

Exothermic decomposition of cumene hydroperoxide at low temperature conditions

HY Hou et al.

AICHE JOURNAL (2001)

Add to Collection

Article Engineering, Chemical

Thermal runaway hazards of cumene hydroperoxide with contaminants

YW Wang et al.

INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2001)

Add to Collection

© Peeref 2019-2024. All rights reserved.