☆ 4.4 Article

Elman neural network-based temperature prediction and optimization for lithium-ion batteries

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART D-JOURNAL OF AUTOMOBILE ENGINEERING (2023)

Related references

Note: Only part of the references are listed.

Article Energy & Fuels

Prediction and optimization of the design decisions of liquid cooling systems of battery modules using artificial neural networks

Emre Bulut et al.

Summary: This study focuses on predicting the effects of cooling channel parameters on temperature, heat transfer coefficient, and pressure drop in a liquid cooling battery system using artificial neural network models. Optimization algorithms are then used to minimize pump power consumption. The chaos game optimization method shows superior performance in terms of speed, accuracy, and power reduction.

INTERNATIONAL JOURNAL OF ENERGY RESEARCH (2022)

Add to Collection

Article Chemistry, Multidisciplinary

Extreme Learning Machine Using Bat Optimization Algorithm for Estimating State of Health of Lithium-Ion Batteries

Dongdong Ge et al.

Summary: This study creatively applied bat algorithm to improve the extreme learning machine (ELM) neural network, forming a BA-ELM model, and applied it to the estimation of the state of health (SOH) of lithium-ion batteries for the first time. The results show that the BA-ELM model outperformed other models in terms of accuracy and generalization performance, demonstrating its potential for future applications.

APPLIED SCIENCES-BASEL (2022)

Add to Collection

Article Electrochemistry

Short-Term Prediction of Remaining Life for Lithium-Ion Battery Based on Adaptive Hybrid Model With Long Short-Term Memory Neural Network and Optimized Particle Filter

Ning He et al.

Summary: This paper proposes an adaptive hybrid model and an improved particle filter for accurately predicting the remaining useful life of lithium-ion batteries. Experimental results demonstrate that the proposed model can effectively characterize battery degradation and achieve higher accuracy.

JOURNAL OF ELECTROCHEMICAL ENERGY CONVERSION AND STORAGE (2022)

Add to Collection

Article Electrochemistry

State of Health Estimation Method for Lithium-Ion Batteries Based on Nonlinear Autoregressive Neural Network Model With Exogenous Input

Yanbo Che et al.

Summary: This article examines the working state estimation of lithium-ion batteries using a combination of equivalent circuit model and nonlinear autoregressive neural network. The experimental results show significant accuracy in estimating the state of health.

JOURNAL OF ELECTROCHEMICAL ENERGY CONVERSION AND STORAGE (2022)

Add to Collection

Article Thermodynamics

A CNN-ABC model for estimation and optimization of heat generation rate and voltage distributions of lithium-ion batteries for electric vehicles

Sercan Yalcin et al.

Summary: Accurately estimating battery voltage and heat generation rate is crucial for safe and efficient operations of electric vehicles. This study proposes a novel scheme combining convolutional neural network and artificial bee colony algorithm for estimating HGR and voltage. The proposed model dynamically reveals hidden features in the data and uses new objective and fitness functions to optimize the estimates.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2022)

Add to Collection

Article Energy & Fuels

A novel heat dissipation structure based on flat heat pipe for battery thermal management system

Yueqi Wang et al.

Summary: The study focuses on the thermal performance and heat dissipation of batteries in flying cars. Flat heat pipe technology is proposed to solve the battery thermal issues, and its effectiveness is verified through experiments. The results show that the battery's maximum temperature occurs at the end of the takeoff stage, while the maximum temperature difference appears during the forward flight segment. With suitable heat dissipation structures and control methods for different discharge conditions and environmental factors, the battery's thermal performance can be improved.

INTERNATIONAL JOURNAL OF ENERGY RESEARCH (2022)

Add to Collection

Article Thermodynamics

Numerical study of nanofluid flow and heat transfer through a non-uniformly heated converging duct

Md Faizan et al.

Summary: This study investigates the effects of non-uniform heating on forced convective heat transfer of nanofluid through a converging miniduct using numerical simulations. The results show that the nanofluid volume fraction and Reynolds number have a significant impact on heat transfer, while increasing the amplitude decreases the heat transfer rate.

CASE STUDIES IN THERMAL ENGINEERING (2022)

Add to Collection

Article Energy & Fuels

Combined influence of concentration-dependent properties, local deformation and boundary confinement on the migration of Li-ions in low-expansion electrode particle during lithiation

Kausthubharam et al.

Summary: This article investigates the stress states of an electrode particle during lithiation, considering both intrinsic and extrinsic factors. The influence of concentration dependent properties, external constraints, and charging rate on stress magnitude and concentration gradient is explored. It is found that the behavior of the electrode particle differs under constrained and unconstrained expansion, and the charging rate affects both stress and concentration gradient.

JOURNAL OF ENERGY STORAGE (2022)

Add to Collection

Article Thermodynamics

Numerical investigation on the thermal management of lithium-ion battery system and cooling effect optimization

Ao Li et al.

Summary: In this study, a three-dimensional thermo-electrochemical model was developed to simulate the temperature distribution of battery packs. The cooling effect of natural and forced air ventilation configurations was compared, and it was found that forced air cooling had a greater impact on temperature reduction. The artificial neural network was coupled with computational fluid dynamics simulation results to optimize specific battery system configurations.

APPLIED THERMAL ENGINEERING (2022)

Add to Collection

Article Thermodynamics

Influence of metal foam thickness on the conduction and convective heat transfer for a flat plate with metal foam impinged by a rectangular slot jet

Ketan Yogi et al.

Summary: The local heat transfer distribution is measured for a flat plate with a porous metal foam subjected to a rectangular slot air jet. The study aims to separate the effects of convection and conduction heat transfer in the flat plate with metal foam. The thickness of the metal foam and the impinging distance of the jet are varied to investigate their influence on heat transfer. Results show that the presence of metal foam reduces convective heat transfer but enhances conduction heat transfer. The thickness of the metal foam affects the hydraulic resistance experienced by the impinging jet. Overall, the enhancement of conduction heat transfer dominates over the attenuation of convective heat transfer.

INTERNATIONAL JOURNAL OF THERMAL SCIENCES (2022)

Add to Collection

Article Energy & Fuels

Implications of novel cold plate design with hybrid cooling on thermal management of fast discharging lithium-ion battery

Md Faizan et al.

Summary: This study proposes a novel hybrid cooling method for the thermal management of fast discharging lithium-ion battery modules. The results show that the module temperature can be reduced below the safety limit when hybrid cooling is applied, and better cooling performance is observed when composite phase change material (CPCM) is wrapped around the battery cell.

JOURNAL OF ENERGY STORAGE (2022)

Add to Collection

Article Electrochemistry

Thermal Modelling Utilizing Multiple Experimentally Measurable Parameters

Anosh Mevawalla et al.

Summary: This paper presents three equivalent thermal circuit models for estimating the internal impedance of a LiFePO4 battery. Experimental measurements and modeling results show good agreement. The models include two 0D models and one 2D model, which analyze the effects of heat sources and thermal conductivity on the battery's thermal behavior.

BATTERIES-BASEL (2022)

Add to Collection

Article Engineering, Electrical & Electronic

Numerical Simulation of Cooling Plate Using K-Epsilon Turbulence Model to Cool Down Large-Sized Graphite/LiFePO4 Battery at High C-Rates

Satyam Panchal et al.

Summary: This study presents an analogous study of the velocity and temperature profiles inside microchannel cooling plates. The experimental work used heat flux sensors and the simulation work used a computational fluid dynamics (CFD) software. The results show that the temperature of the cooling plates increases as the charging-discharging rates and ambient temperature increase.

WORLD ELECTRIC VEHICLE JOURNAL (2022)

Add to Collection

Article Engineering, Mechanical

Implication of geometrical configuration on heat transfer enhancement in converging minichannel using nanofluid by two phase mixture model: A numerical analysis

Md. Faizan et al.

Summary: The study investigates laminar forced convective flow of nanofluid through a converging minichannel using a two phase mixture model. The results show a significant increase in pressure drop and heat transfer rate with particle loading, as well as an enhancement in the heat transfer coefficient. The pressure drop in the converging channel increases with the converging angle, and there is a notable concern of pumping power with increase in converging angle, volume fraction and Reynolds number.

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART E-JOURNAL OF PROCESS MECHANICAL ENGINEERING (2021)

Add to Collection

Article Energy & Fuels

A hybrid transfer learning scheme for remaining useful life prediction and cycle life test optimization of different formulation Li-ion power batteries

Jian Ma et al.

Summary: The proposed method utilizes transfer-learning and prediction modeling to optimize test data selection and model training, improving long-term cycle life prediction accuracy for Li-ion batteries.

APPLIED ENERGY (2021)

Add to Collection

Article Thermodynamics

Thermal performance of lithium-ion batteries applying forced air cooling with an improved aluminium foam heat sink design

Yuanlong Wang et al.

Summary: A lithium-ion battery thermal management system using forced air cooling with open-cell aluminum foam was proposed. The thermal interaction between battery cells becomes more obvious after using aluminum foam, which can significantly reduce battery temperature rise. However, aluminum foam may cause flow resistance and pressure loss, leading to uneven temperature distribution on the battery surface.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2021)

Add to Collection

Article Engineering, Electrical & Electronic

SOC Estimation of Li-ion Batteries With Learning Rate-Optimized Deep Fully Convolutional Network

M. A. Hannan et al.

Summary: In this study, a deep fully convolutional network model was proposed to accurately estimate the state-of-charge (SOC) of lithium-ion batteries, achieving impressive performance under different temperature conditions.

IEEE TRANSACTIONS ON POWER ELECTRONICS (2021)

Add to Collection

Article Energy & Fuels

Lithium-ion battery state of health estimation using the incremental capacity and wavelet neural networks with genetic algorithm

Chun Chang et al.

Summary: This paper proposes an online method based on incremental capacity and wavelet neural networks, which can estimate the health status of the battery under current discharge. By extracting important variables from IC curves and optimizing the WNN model parameters using genetic algorithm, the SOH of the battery is successfully estimated with an error of less than 3%.

JOURNAL OF ENERGY STORAGE (2021)

Add to Collection

Article Computer Science, Information Systems

State of Charge Estimation for Lithium-Ion Battery Based on NARX Recurrent Neural Network and Moving Window Method

Qiao Wang et al.

Summary: This paper proposes a battery model based on the NARX recurrent neural network and moving window method, which improves SOC estimation accuracy, modeling speed, and robustness. By reducing reliance on data quantity, preventing gradient explosion and vanishing, and comparing with other methods, the proposed model demonstrates higher accuracy and speed in SOC estimation.

IEEE ACCESS (2021)

Add to Collection

Article Chemistry, Physical

Co-estimation of lithium-ion battery state of charge and state of temperature based on a hybrid electrochemical-thermal-neural-network model

Fei Feng et al.

JOURNAL OF POWER SOURCES (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Sensitivity Analysis of the Battery Thermal Management System with a Reciprocating Cooling Strategy Combined with a Flat Heat Pipe

Tang Wei et al.

ACS OMEGA (2020)

Add to Collection

Article Thermodynamics

Cooling optimization strategy for lithium-ion batteries based on triple-step nonlinear method

Yan Ma et al.

ENERGY (2020)

Add to Collection

Article Computer Science, Information Systems

State of Charge Estimation in Lithium-Ion Batteries: A Neural Network Optimization Approach

M. S. Hossain Lipu et al.

ELECTRONICS (2020)

Add to Collection

Article Thermodynamics

Improved thermal performance of a large laminated lithium-ion power battery by reciprocating air flow

Shixue Wang et al.

APPLIED THERMAL ENGINEERING (2019)

Add to Collection

Article Thermodynamics

Experimental study on the thermal management performance of air cooling for high energy density cylindrical lithium-ion batteries

Yuqian Fan et al.

APPLIED THERMAL ENGINEERING (2019)

Add to Collection

Article Thermodynamics

Thermal modeling of full-size-scale cylindrical battery pack cooled by channeled liquid flow

Wenjiong Cao et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2019)

Add to Collection

Article Energy & Fuels

Remaining useful life prediction for lithium-ion batteries based on a hybrid model combining the long short-term memory and Elman neural networks

Xiaoyu Li et al.

JOURNAL OF ENERGY STORAGE (2019)

Add to Collection

Article Thermodynamics

State of charge estimation of lithium-ion batteries using optimized Levenberg-Marquardt wavelet neural network

Bizhong Xia et al.

ENERGY (2018)

Add to Collection

Article Thermodynamics

Structure optimization of parallel air-cooled battery thermal management system with U-type flow for cooling efficiency improvement

Kai Chen et al.

ENERGY (2018)

Add to Collection

Article Energy & Fuels

Research on heat dissipation performance and flow characteristics of air-cooled battery pack

Xiao Ming Xu et al.

INTERNATIONAL JOURNAL OF ENERGY RESEARCH (2018)

Add to Collection

Article Thermodynamics

Thermal management of lithium ion batteries using graphene coated nickel foam saturated with phase change materials

Abid Hussain et al.

INTERNATIONAL JOURNAL OF THERMAL SCIENCES (2018)

Add to Collection

Article Thermodynamics

Forced Convective Heat Transfer in a Channel Filled With a Functionally Graded Metal Foam Matrix

Xiaohui Bai et al.

JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME (2018)

Add to Collection

Article Engineering, Multidisciplinary

Design and simulation of a lithium-ion battery at large C-rates and varying boundary conditions through heat flux distributions

S. Panchal et al.

MEASUREMENT (2018)

Add to Collection

Article Green & Sustainable Science & Technology

Experimental investigation on using the electric vehicle air conditioning system for lithium-ion battery thermal management

Jiwen Cen et al.

ENERGY FOR SUSTAINABLE DEVELOPMENT (2018)

Add to Collection

Article Computer Science, Information Systems

Neural Network Approach for Estimating State of Charge of lithium-Ion Battery Using Backtracking Search Algorithm

Mahammad A. Hannan et al.

IEEE ACCESS (2018)

Add to Collection

Article Thermodynamics

Heat transfer performance evaluation based on local thermal non-equilibrium for air forced convection in channels filled with metal foam and spherical particles

W. Zhang et al.

APPLIED THERMAL ENGINEERING (2018)

Add to Collection

Review Materials Science, Multidisciplinary

Temperature effect and thermal impact in lithium-ion batteries: A review

Shuai Ma et al.

PROGRESS IN NATURAL SCIENCE-MATERIALS INTERNATIONAL (2018)

Add to Collection

Article Thermodynamics

A unified modeling framework for lithium-ion batteries: An artificial neural network based thermal coupled equivalent circuit model approach

Qian-Kun Wang et al.

ENERGY (2017)

Add to Collection

Review Thermodynamics

Thermal issues about Li-ion batteries and recent progress in battery thermal management systems: A review

Huaqiang Liu et al.

ENERGY CONVERSION AND MANAGEMENT (2017)

Add to Collection

Article Energy & Fuels

Computational fluid dynamics simulation on open cell aluminium foams for Li-ion battery cooling system

Lip Huat Saw et al.

APPLIED ENERGY (2017)

Add to Collection

Article Thermodynamics

Configuration optimization of battery pack in parallel air-cooled battery thermal management system using an optimization strategy

Kai Chen et al.

APPLIED THERMAL ENGINEERING (2017)

Add to Collection

Article Computer Science, Interdisciplinary Applications

Neural network based computational model for estimation of heat generation in LiFePO4 pouch cells of different nominal capacities

Shashank Arora et al.

COMPUTERS & CHEMICAL ENGINEERING (2017)

Add to Collection

Article Thermodynamics

Cumulative effects of using pin fin heat sink and porous metal foam on thermal management of lithium-ion batteries

Shahabeddin K. Mohammadian et al.

APPLIED THERMAL ENGINEERING (2017)

Add to Collection

Article Thermodynamics

Thermal modeling and validation of temperature distributions in a prismatic lithium-ion battery at different discharge rates and varying boundary conditions

S. Panchal et al.

APPLIED THERMAL ENGINEERING (2016)

Add to Collection

Article Thermodynamics

Experimental and modeling study of controller-based thermal management of battery modules under dynamic loads

Haoting Wang et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2016)

Add to Collection

Article Chemistry, Physical

Experimental study on the influence of temperature and state-of-charge on the thermophysical properties of an LFP pouch cell

Stephen J. Bazinski et al.

JOURNAL OF POWER SOURCES (2015)

Add to Collection

Article Chemistry, Physical

Thermal management improvement of an air-cooled high-power lithium-ion battery by embedding metal foam

Shahabeddin K. Mohammadian et al.

JOURNAL OF POWER SOURCES (2015)

Add to Collection

Article Energy & Fuels

Thermal investigation of lithium-ion battery module with different cell arrangement structures and forced air-cooling strategies

Tao Wang et al.

APPLIED ENERGY (2014)

Add to Collection

Article Thermodynamics

Combined experimental and numerical study of thermal management of battery module consisting of multiple Li-ion cells

Fan He et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2014)

Add to Collection

Article Chemistry, Physical

A lumped-parameter electro-thermal model for cylindrical batteries

Xinfan Lin et al.

JOURNAL OF POWER SOURCES (2014)

Add to Collection

Article Chemistry, Physical

Reciprocating air flow for Li-ion battery thermal management to improve temperature uniformity

Rajib Mahamud et al.

JOURNAL OF POWER SOURCES (2011)

Add to Collection

Article Chemistry, Physical

Three-dimensional thermal finite element modeling of lithium-ion battery in thermal abuse application

Guifang Guo et al.

JOURNAL OF POWER SOURCES (2010)

Add to Collection

© Peeref 2019-2024. All rights reserved.