☆ 4.4 Article

Fabrication and characterization of light weight PVC foam based E-glass reinforced polyester sandwich composites

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE (2023)

Related references

Note: Only part of the references are listed.

Article Engineering, Mechanical

Multiobjective optimization design of hybrid composite laminates for vibration using sequential permutation table method

Zhao Jing et al.

Summary: This work presents a sequential permutation table (SPT) method for the multiobjective optimization design of two-material hybrid composite laminates, which maximizes the fundamental frequency and minimizes the cost/weight. Through vibration analysis and ply orientation optimization, the SPT method demonstrates its effectiveness and efficiency in optimal design of hybrid composite laminates.

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE (2022)

Add to Collection

Article Engineering, Mechanical

Study of matrix modifications by nano-clay on the mechanical properties of AA3003 honeycomb sandwich panels

P. Prasanth et al.

Summary: In this study, the addition of nano-clay was attempted to improve the face/core adhesion of composite sandwich panels. The results showed a significant enhancement in the mechanical properties of the panels, particularly under in-plane compression and bending load. Increasing the strain rate was found to increase the failure load of the sandwich panels, and SEM analysis revealed better adhesion between the aluminum honeycomb core and face sheets.

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE (2022)

Add to Collection

Article Engineering, Mechanical

Environmental degradation and mechanical behavior of glass fiber reinforced polymer nanocomposites used in offshore applications

Shubhendu Prashant Singh et al.

Summary: This study investigates the effect of temperature, alkalinity, and rate of loading on the mechanical properties of glass fiber/epoxy composite. The addition of nanoclay is found to improve the performance of the composite material. Additionally, moisture and loading conditions also impact the mechanical properties of the composite material.

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE (2022)

Add to Collection

Article Engineering, Mechanical

Tribological characterization of sustainable Jute-Epoxy-Rubber crumb hybrid composite

Vishwas Mahesh et al.

Summary: This study investigates the three body abrasive behavior and influential factors of Jute-Epoxy-Rubber crumb hybrid composites at different rubber crumb loadings. Experimental and statistical methods were used to determine the specific wear rate and the most influential factor affecting the abrasion. Scanning electron microscopy (SEM) was used to study the wear mechanisms.

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE (2022)

Add to Collection

Review Materials Science, Composites

State of the art review on mechanical properties of sandwich composite structures

Vivek Patekar et al.

Summary: Sandwich composite structures are widely used in various industries due to their high specific strength and energy absorption capabilities. The mechanical properties of these structures depend on the material properties of the face sheet, core, and their interface. Researchers have explored the use of nano-fillers to improve the mechanical properties of composite structures. This review discusses the influence of various material and geometrical parameters, such as fiber reinforcement and nano-fillers, on the mechanical properties of sandwich composite structures. Additionally, the deformation behavior and mechanical properties of the honeycomb core, as well as the effect of temperature variation, are discussed. Future advancements in this field are also explored.

POLYMER COMPOSITES (2022)

Add to Collection

Article Engineering, Mechanical

Dynamic compression and tensile responses of an epoxy matrix composites at high strain rate

H. X. Hu et al.

Summary: The study showed that the dynamic compression and tensile mechanical behaviors of bicomponent epoxy resin matrix composites filled with semi-crystalline thermoplastic Polyether-ether ketone were influenced by both strain rate and the properties of the epoxy resin matrix. The PAEK-C fillers exhibited significant toughening effect, increasing the ductility of the samples and affecting the stress-strain curves.

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE (2021)

Add to Collection

Article Materials Science, Characterization & Testing

Experimental investigation on the mechanical properties of aluminium sandwiched sisal/kenaf/aloevera/jute/flax natural fibre-reinforced epoxy LY556/GY250 composites

Jeswin Arputhabalan et al.

Summary: This study aims to investigate the mechanical properties of sandwich epoxy composites reinforced with various commonly used natural fibers and compared the performance of Epoxy GY250 resin with Epoxy LY556 resin. The results show that the combination of different epoxy resins and natural fibers affects the tensile, impact, and flexural properties of the composites.

POLYMERS & POLYMER COMPOSITES (2021)

Add to Collection

Article Engineering, Civil

Effect of geometrical parameters on the flexural properties of sandwich structures with 3D-printed honeycomb core and E-glass/epoxy Face-sheets

Sabah Pirouzfar et al.

Summary: This study investigates the flexural properties of 3D-printed honeycomb structures and sandwich panels with face-sheets made of E-glass/epoxy laminates. The impact of different geometrical parameters on the flexural properties is examined, with the horizontal honeycomb core structure showing the highest normalized energy absorption. The use of additive manufacturing technology significantly improves the flexural properties of the honeycomb core sandwich structures compared to traditional materials like Nomex and Aluminum.

STRUCTURES (2021)

Add to Collection

Article Materials Science, Composites

Thermo-mechanical and morphological characterization of needle punched non-woven banana fiber reinforced polymer composites

Jack J. Kenned et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2020)

Add to Collection

Article Engineering, Multidisciplinary

Experimental investigation of basalt/s-glass/epoxy/PVC H-130 hybrid sandwich composite

S. Kasirajan et al.

JOURNAL OF THE CHINESE INSTITUTE OF ENGINEERS (2020)

Add to Collection

Article Materials Science, Multidisciplinary

Mechanical testing and microstructure characterization of glass fiber reinforced isophthalic polyester composites

Ritesh Bhat et al.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2019)

Add to Collection

Article Mechanics

Assessment on the ageing of sandwich composites with vinylester-based composite faces and PVC foam core in various harsh environments

Anxin Ding et al.

COMPOSITE STRUCTURES (2019)

Add to Collection

Article Nanoscience & Nanotechnology

Fabrication and Characterization of E-Glass Fiber Reinforced Unsaturated Polyester Resin Based Composite Materials

Md. Naimul Islam et al.

NANO HYBRIDS AND COMPOSITES (2019)

Add to Collection

Article Mechanics

Ageing of sandwich composites with E-glass fibre/vinylester skins and PVC foam core in synergistic environmental agents

Anxin Ding et al.

COMPOSITE STRUCTURES (2018)

Add to Collection

Article Chemistry, Applied

Construction of sustainable polyurethane-based gel-coats containing poly(ε-caprolactone)-grafted lignin and their coating performance

Su-Hee Jang et al.

PROGRESS IN ORGANIC COATINGS (2018)

Add to Collection

Article Materials Science, Composites

Mechanical properties in glass fiber PVC-foam sandwich structures from different chopped fiber interfacial reinforcement through vacuum-assisted resin transfer molding (VARTM) processing

Qihui Chen et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2017)

Add to Collection

Article Engineering, Mechanical

Fatigue characterization of Poly Vinyl Chloride (PVC) foam core sandwich composite using the G-control method

Marcello Manca et al.

JOURNAL OF SANDWICH STRUCTURES & MATERIALS (2016)

Add to Collection

Review Materials Science, Multidisciplinary

Cracks, microcracks and fracture in polymer structures: Formation, detection, autonomic repair

Firas Awaja et al.

PROGRESS IN MATERIALS SCIENCE (2016)

Add to Collection

Article Engineering, Multidisciplinary

Thermal behavior of E-glass fiber-reinforced unsaturated polyester composites

K. Laoubi et al.

COMPOSITES PART B-ENGINEERING (2014)

Add to Collection

Article Engineering, Manufacturing

Fiber-reinforced composite foam from expandable PVC microspheres

L Vaikhanski et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2003)

Add to Collection

© Peeref 2019-2024. All rights reserved.