☆ 4.7 Article

Transparent nylon 6 nanofibers-reinforced epoxy matrix composites with superior mechanical and thermal properties

POLYMER TESTING (2023)

Related references

Note: Only part of the references are listed.

Article Engineering, Multidisciplinary

Simultaneously improved thermal conductivity and mechanical properties of boron nitride nanosheets/aramid nanofiber films by constructing multilayer gradient structure

Li-Hua Zhao et al.

Summary: The study developed multilayer gradient boron nitride nanosheet/aramid nanofiber films with excellent thermal conductivity and improved tensile strength, serving as an effective strategy to reconcile the conflict between thermal conductivity and mechanical properties.

COMPOSITES PART B-ENGINEERING (2022)

Add to Collection

Article Polymer Science

Considering Electrospun Nanofibers as a Filler Network in Electrospun Nanofiber-Reinforced Composites to Predict the Tensile Strength and Young's Modulus of Nanocomposites: A Modeling Study

Vishal Gavande et al.

Summary: This study presents a simple approach to investigate the theoretical models for electrospun polymer nanofiber-reinforced nanocomposites. The results show that the models used in this study can be applied to estimate the tensile strength and Young's modulus of the composite films.

POLYMERS (2022)

Add to Collection

Article Engineering, Multidisciplinary

Anisotropic microstructure dependent mechanical behavior of 3D-printed basalt fiber-reinforced thermoplastic composites

Siwon Yu et al.

Summary: This study utilized CT and 3D X-ray microscopy to investigate the anisotropic structure of fibers and voids in 3D-printed composites, revealing their impact on the mechanical behavior of the composites.

COMPOSITES PART B-ENGINEERING (2021)

Add to Collection

Article Chemistry, Applied

High pressure laminates reinforced with electrospun cellulose acetate nanofibers

Yujie Ji et al.

Summary: The CA nanofiber mats prepared by electrospinning significantly improved the mechanical properties and flame retardancy of the HPLs, showing great potential for enhancing the performance of composite materials.

CARBOHYDRATE POLYMERS (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Fabrication of toughest and transparent electrospun nylon 6 nanofiber-reinforced PVA composites

Vishal Gavande et al.

Summary: In this study, void-free composites of electrospun nylon 6 nanofibers were manufactured as reinforcement for the poly(vinyl alcohol) (PVA) matrix using solution impregnation and filtration methods. The introduction of nylon 6 nanofiber mats as reinforcement synergistically improved mechanical efficiency for the PVA matrix. Optimal enhancement in ultimate tensile stress and tensile modulus was achieved by sacrificing elongation in the composite films with a 15 wt% polymer solution.

MOLECULAR CRYSTALS AND LIQUID CRYSTALS (2021)

Add to Collection

Article Polymer Science

Development of highly transparent UV-curable nylon 6 nanofiber-reinforced polyurethane acrylate nanocomposite coatings for pre-coated metals

Vishal Gavande et al.

Summary: This study developed a transparent and flexible nanocomposite using electrospun nylon 6 nanofibers as reinforcement. Deposition of nylon 6 nanofibers in the nanocomposite significantly improved mechanical properties while maintaining optical transparency.

JOURNAL OF APPLIED POLYMER SCIENCE (2021)

Add to Collection

Review Engineering, Manufacturing

Electrospun fibrous materials and their applications for electromagnetic interference shielding: A review

Hongtao Guo et al.

Summary: Electrospinning technology plays a crucial role in electromagnetic interference shielding, with electrospun products made from various fibrous materials effectively shielding electromagnetic interference and holding promise for further breakthroughs in high-performance electromagnetic shielding.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2021)

Add to Collection

Review Materials Science, Multidisciplinary

Electrospun nanofiber-based soft electronics

Yan Wang et al.

Summary: Electrospun nanofibers have advantages in flexibility, transparency, and conductivity in the field of soft electronics. The structure, properties, and assembly strategies for flexible/stretchable electronic devices utilizing electrospun nanofibers are highlighted. Recent progress includes the design and fabrication of various electronic devices such as conductors, sensors, transistors, and energy harvesting and storage components.

NPG ASIA MATERIALS (2021)

Add to Collection

Article Materials Science, Composites

Carbon nanotubes- A powerful nano-filler for enhancing the performance properties of polyetherketoneketone composites and adhesives

Umesh Marathe et al.

Summary: The study showed that adding 0.3 wt% of MWCNTs resulted in the best combination of performance properties, including improved tensile strength. In adhesives, the reinforcement and increased interfacial adhesion effects of MWCNTs outweighed the friction-reducing effect significantly, leading to a net improvement in lap shear strength.

COMPOSITES SCIENCE AND TECHNOLOGY (2021)

Add to Collection

Article Materials Science, Composites

Various attributes controlling the performance of nano-composites and adhesives of TiC-PAEK

Umesh Marathe et al.

Summary: The adhesion between polymer reinforced with TiC nanoparticles and steel surface is influenced by factors such as surface free energy, shape, amount, and size of particles, and reinforcement effects in causing cohesive or adhesive failure. Nanocomposites containing TiC nanoparticles outperformed microcounterparts in various physical, thermal, mechanical, and adhesive strength properties. The extent of adhesive failure decreased and cohesive failure increased with an increase in nano-particles, as validated by available models for nanocomposites.

COMPOSITES SCIENCE AND TECHNOLOGY (2021)

Add to Collection

Article Materials Science, Composites

Mechanical properties of mechanically-defibrated cellulose nanofiber reinforced epoxy resin matrix composites

Hiroki Kurita et al.

Summary: Cellulose nanofibers (CNF) have been studied as reinforcement in composite materials, with mechanical defibration method considered cost-effective and practical for achieving the desired properties in polymer matrices.

JOURNAL OF COMPOSITE MATERIALS (2021)

Add to Collection

Article Polymer Science

Polyketone nanofiber: an effective reinforcement for the development of novelUV-curable, highly transparent and flexible polyurethane nanocomposite films

Vishal Gavande et al.

POLYMER INTERNATIONAL (2020)

Add to Collection

Article Materials Science, Composites

On the mechanical properties of continuous fiber reinforced thermoplastic composites realized through vacuum infusion

Vishal Gavande et al.

JOURNAL OF COMPOSITE MATERIALS (2020)

Add to Collection

Article Materials Science, Composites

Analytical study on the 3D-printed structure and mechanical properties of basalt fiber-reinforced PLA composites using X-ray microscopy

Siwon Yu et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2019)

Add to Collection

Article Nanoscience & Nanotechnology

Transparent Impact-Resistant Composite Films with Bioinspired Hierarchical Structure

Ran Chen et al.

ACS APPLIED MATERIALS & INTERFACES (2019)

Add to Collection

Article Engineering, Multidisciplinary

Effects of polyvinyl alcohol nanofiber mats on the adhesion strength and fracture toughness of epoxy adhesive joints

Mursel Ekrem et al.

COMPOSITES PART B-ENGINEERING (2018)

Add to Collection

Review Polymer Science

Electrospun nanofiber reinforced composites: a review

Shaohua Jiang et al.

POLYMER CHEMISTRY (2018)

Add to Collection

Article Engineering, Mechanical

Interfacial toughening of carbon/epoxy composite by incorporating styrene acrylonitrile nanofibers

Rasoul Esmaeely Neisiany et al.

THEORETICAL AND APPLIED FRACTURE MECHANICS (2018)

Add to Collection

Proceedings Paper Materials Science, Multidisciplinary

Dry Sliding Wear Behaviour Of AA6082-5%SiC AND AA6082-5%TiB2 Metal Matrix Composites

Sreehari Peddavarapu et al.

MATERIALS TODAY-PROCEEDINGS (2018)

Add to Collection

Article Materials Science, Composites

Glass/epoxy structural composites with interleaved nylon 6/6 nanofibers

Anoop Anand et al.

JOURNAL OF COMPOSITE MATERIALS (2017)

Add to Collection

Article Mechanics

How fracture toughness of epoxy-based nanocomposite is affected by PA66 electrospun nanofiber yarn

E. Ahmadloo et al.

ENGINEERING FRACTURE MECHANICS (2017)

Add to Collection

Article Nanoscience & Nanotechnology

Damage-Resistant Composites Using Electrospun Nanofibers: A Multiscale Analysis of the Toughening Mechanisms

Lode Daelemans et al.

ACS APPLIED MATERIALS & INTERFACES (2016)

Add to Collection

Article Mechanics

The effect of thickness of Nylon 6,6 nanofibrous mat on Modes I-II fracture mechanics of UD and woven composite laminates

T. Brugo et al.

COMPOSITE STRUCTURES (2016)

Add to Collection

Article Materials Science, Multidisciplinary

Short electrospun carbon nanofiber reinforced polyimide composite with high dielectric permittivity

Wenhui Xu et al.

MATERIALS LETTERS (2015)

Add to Collection

Article Chemistry, Multidisciplinary

Green Poly(ε-caprolactone) Composites Reinforced with Electrospun Polylactide/Poly(ε-caprolactone) Blend Fiber Mats

Jianxiang Chen et al.

ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2014)

Add to Collection

Article Materials Science, Composites

Short nylon-6 nanofiber reinforced transparent and high modulus thermoplastic polymeric composites

Shaohua Jiang et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2013)

Add to Collection

Article Materials Science, Composites

Short electrospun polymeric nanofibers reinforced polyimide nanocomposites

Shaohua Jiang et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2013)

Add to Collection

Article Nanoscience & Nanotechnology

Manufacture of Void-Free Electrospun Polymer Nanofiber Composites with Optimized Mechanical Properties

Urszula Stachewicz et al.

ACS APPLIED MATERIALS & INTERFACES (2012)

Add to Collection

Article Nanoscience & Nanotechnology

MWCNTs/P(St-co-GMA) Composite Nanofibers of Engineered Interface Chemistry for Epoxy Matrix Nanocomposites

Elif Ozden-Yenigun et al.

ACS APPLIED MATERIALS & INTERFACES (2012)

Add to Collection

Article Nanoscience & Nanotechnology

Novel Layer-by-Layer Procedure for Making Nylon-6 Nanofiber Reinforced High Strength, Tough, and Transparent Thermoplastic Polyurethane Composites

Shaohua Jiang et al.

ACS APPLIED MATERIALS & INTERFACES (2012)

Add to Collection

Article Materials Science, Paper & Wood

Aligned electrospun cellulose fibers reinforced epoxy resin composite films with high visible light transmittance

Huaqiang Liao et al.

CELLULOSE (2012)

Add to Collection

Article Chemistry, Multidisciplinary

Polymer nanocomposites: structure, interaction, and functionality

Gergely Keledi et al.

NANOSCALE (2012)

Add to Collection

Review Engineering, Manufacturing

Review of the mechanical properties of carbon nanofiber/polymer composites

Mohammed H. Al-Saleh et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2011)

Add to Collection

Article Nanoscience & Nanotechnology

In situ tensile testing of nanofibers by combining atomic force microscopy and scanning electron microscopy

Fei Hang et al.

NANOTECHNOLOGY (2011)

Add to Collection

Article Nanoscience & Nanotechnology

Engineering Chemistry of Electrospun Nanofibers and Interfaces in Nanocomposites for Superior Mechanical Properties

Elif Ozden et al.

ACS APPLIED MATERIALS & INTERFACES (2010)

Add to Collection

Article Materials Science, Composites

Electrospun nanofiber reinforced and toughened composites through in situ nano-interface formation

Song Lin et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2008)

Add to Collection

Article Polymer Science

Electrospun nylon 6 nanofiber reinforced BIS-GMA/TEGDMA dental restorative composite resins

H Fong

POLYMER (2004)

Add to Collection

Article Construction & Building Technology

Progress on understanding debonding problems in reinforced concrete and steel members strengthened using FRP composites

O Buyukozturk et al.

CONSTRUCTION AND BUILDING MATERIALS (2004)

Add to Collection

Article Nanoscience & Nanotechnology

Tailoring of interfaces in glass fiber reinforced polymer composites: a review

AT DiBenedetto

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2001)

Add to Collection

© Peeref 2019-2024. All rights reserved.