☆ 4.7 Article

Study of the dynamic fragility of polymer nanocomposites: Correlation with damping

POLYMER COMPOSITES (2023)

Related references

Note: Only part of the references are listed.

Article Chemistry, Applied

Exploiting graphene oxide as a potential additive to improve the performance of cold-mixed epoxy asphalt binder

Jingjing Si et al.

Summary: This study evaluated the potential of graphene oxide (GO) as an additive for preparing GO/CEA composites. The influences of GO on the structure and performances of CEA were investigated. Results showed that GO improved the compatibility of epoxy resin and asphalt, enhanced the heat resistance and toughness of the cured CEA, but slightly weakened its strength. The introduction of GO lowered the glass transition temperature and storage modulus of the cured CEA.

JOURNAL OF VINYL & ADDITIVE TECHNOLOGY (2023)

Add to Collection

Article Chemistry, Multidisciplinary

The Effect of Silica Particle Size on the Mechanical Enhancement of Polymer Nanocomposites

Evagelia Kontou et al.

Summary: SiO(2) micro/nanocomposites based on poly-lactic acid (PLA) and an epoxy resin were prepared and studied experimentally. The mechanical and thermomechanical performance of the composites was analyzed using dynamic mechanical analysis and scanning electron microscopy (SEM). Finite element analysis (FEA) and comparison with analytical models were also carried out. The results showed that the nanosized particles exhibited higher reinforcement, especially in resin-based nanocomposites.

NANOMATERIALS (2023)

Add to Collection

Article Materials Science, Composites

Thermomechanical performance of biodegradable poly (lactic acid)/carbonaceous hybrid nanocomposites: Comparative study

Ilias Charitos et al.

Summary: In this study, hybrid nanocomposites based on polylactic acid (PLA) matrix and mixtures of graphene oxide (GO) with carbon nanotubes (CNTs) or carbon nanofibers (CNFs) were prepared and analyzed. The experimental data support the presence of a synergistic effect in the PLA/GO/CNT nanocomposites, leading to enhanced mechanical properties, crystallinity, and conductivity within the bulk matrix.

POLYMER COMPOSITES (2022)

Add to Collection

Article Engineering, Chemical

The absolute heat capacity of polymer grafted nanoparticles using fast scanning calorimetry

Nazam Sakib et al.

Summary: The absolute heat capacity of a matrix-free polystyrene grafted silica nanocomposite system was investigated using Flash DSC and compared to a neat polystyrene sample. The results showed that the heat capacity of the polymer in the nanocomposite was 8% lower than that of the neat polystyrene, and there was a 15% lower change in heat capacity at the glass transition temperature. Moreover, there was a 2 nm-thick immobile layer of polymer around the nanoparticles, and the glassy layer remained immobile up to 300 degrees C.

POLYMER ENGINEERING AND SCIENCE (2022)

Add to Collection

Article Materials Science, Composites

Effects of oil palm and montmorillonite nanofillers on stiffness and interfacial adhesion of kenaf/epoxy hybrid nanocomposites

Helmi Hammami et al.

Summary: The dielectric properties of bio-hybrid composites reinforced with OPEFB, MMT, and OMMT nanoclays were evaluated in terms of molecular mobility, interfacial adhesion, and fragility near the glass transition temperature. The addition of nanofillers affected the relaxations and dielectric strength, with different types of fillers leading to different behaviors in the composites. The nanofillers were found to improve the distribution and bonding between KF fibers and epoxy resin in the matrix.

POLYMER COMPOSITES (2021)

Add to Collection

Article Materials Science, Composites

Damping and mechanical properties of carbon nanotube solvent-free nanofluids-filled epoxy nanocomposites

Yudeng Wang et al.

Summary: The study shows that nanofluids with excellent dispersity and weak interface strength can enhance both the damping and mechanical properties of epoxy composites. Adding 0.5 wt% MWNT to the epoxy resin matrix significantly improves the strength of the nanocomposites.

POLYMER COMPOSITES (2021)

Add to Collection

Article Engineering, Chemical

New contributions from thermal and dielectric techniques to the understanding of the dynamic properties of medium to long chain poly (propylene glycols)

Herminio P. Diogo et al.

Summary: The molecular mobility of poly(propylene glycols) with different molecular weights was studied, showing that the glass transition temperature tends towards a limit value, different types of molecular mobility were identified at different temperatures, and the dynamic fragility was found to be independent of molecular weight in the studied range.

POLYMER ENGINEERING AND SCIENCE (2021)

Add to Collection

Article Materials Science, Characterization & Testing

The synergistic effect on the thermomechanical and electrical properties of carbonaceous hybrid polymer nanocomposites

Ilias Charitos et al.

Summary: The study showed that incorporating two different types of nanofillers into a polymeric matrix simultaneously can improve thermomechanical performance, with a synergistic effect observed especially between carbon nanotubes and graphene. This finding was further supported by BDS and Raman results, suggesting a new perspective for the potential of mLLDPE/hybrid nanocomposites in targeted applications.

POLYMER TESTING (2021)

Add to Collection

Article Engineering, Chemical

Interfacial characteristics of poly(ε-caprolactone)-grafted-halloysites nanotubes bionanocomposites

Nouha Ghorbel et al.

Summary: The study investigated the dielectric and thermal characteristics of nanohybrid films based on poly(epsilon-caprolactone) with varying loadings of halloysite nanotubes. Broadband dielectric spectroscopy revealed the impact of the added HNT fillers on the molecular relaxation and interfacial polarization of PCL, recommending a weight ratio of 3% to 5% for optimal performance in various applications.

POLYMER ENGINEERING AND SCIENCE (2021)

Add to Collection

Article Materials Science, Composites

Dielectric and interfacial properties investigation of poly(acrylonitrile-co-2,2,2-trifluoroethylmethacrylate) copolymer/organomodified beidellite clay nanocomposites

Sirine Taktak et al.

POLYMER COMPOSITES (2020)

Add to Collection

Article Food Science & Technology

Rheology of carbohydrate blends close to the glass transition: Temperature and water content dependence of the viscosity in relation to fragility and strength

Job Ubbink et al.

FOOD RESEARCH INTERNATIONAL (2020)

Add to Collection

Article Materials Science, Composites

Preparation and Thermomechanical Characterization of Metallocene Linear Low-Density Polyethylene/Carbon Nanotube Nanocomposites

Ilias Charitos et al.

POLYMER COMPOSITES (2019)

Add to Collection

Article Materials Science, Composites

Morphology, structure, and segmental dynamics in polyazomethine/hybrid carbon nanofillers composites

Sergei Bronnikov et al.

POLYMER COMPOSITES (2019)

Add to Collection

Article Materials Science, Composites

Role of ZrO2 on physico-chemical properties of PVA/NaClO4 composites for energy storage applications

Jagadish Naik et al.

POLYMER COMPOSITES (2018)

Add to Collection

Article Materials Science, Composites

Thermomechanical-electrical properties and micromechanics modeling of linear low density polyethylene reinforced with multi-walled carbon nanotubes

George Georgousis et al.

POLYMER COMPOSITES (2018)

Add to Collection

Article Engineering, Chemical

Mechanical, Thermal, and Dielectric Properties of Poly(lactic acid)/Chitosan Nanocomposites

Moataz A. Elsawy et al.

POLYMER ENGINEERING AND SCIENCE (2016)

Add to Collection

Article Materials Science, Composites

Dynamic Mechanical Properties and Correlation With Dynamic Fragility of Sisal Reinforced Composites

Heitor Luiz Ornaghi Junior et al.

POLYMER COMPOSITES (2015)

Add to Collection

Article Engineering, Chemical

Slow relaxations in semicrystalline poly(butylene succinate) below and above Tg

Joaquim J. Moura Ramos et al.

POLYMER ENGINEERING AND SCIENCE (2015)

Add to Collection

Article Polymer Science

Structural Dependence of the Molecular Mobility in the Amorphous Fractions of Polylactide

Nicolas Delpouve et al.

MACROMOLECULES (2014)

Add to Collection

Article Materials Science, Composites

Mechanical Behavior and Correlation Between Dynamic Fragility and Dynamic Mechanical Properties of Curaua Fiber Composites

Humberto Sartori Pompeo da Silva et al.

POLYMER COMPOSITES (2014)

Add to Collection

Article Engineering, Chemical

Cooperative Rearrangement Region in Nanoclay-Reinforced Unsaturated Polyester Resin

Mehdi Poorabdollah et al.

POLYMER ENGINEERING AND SCIENCE (2014)

Add to Collection

Article Polymer Science

Influence of different concentrations of N-phenylaminopropyl - POSS on the thermodynamic fragility of the cured epoxy resin

Vinicius Pistor et al.

POLYMER (2013)

Add to Collection

Article Materials Science, Composites

Effects of wood flour addition and coupling agent content on mechanical properties of recycled polystyrene/wood flour composites

Matheus Poletto et al.

JOURNAL OF THERMOPLASTIC COMPOSITE MATERIALS (2012)

Add to Collection

Article Engineering, Chemical

Surface Modification of Spruce Wood Flour and Effects on the Dynamic Fragility of PLA/Wood Composites

Adriana Gregorova et al.

POLYMER ENGINEERING AND SCIENCE (2011)

Add to Collection

Article Materials Science, Ceramics

Correlations between dynamic fragility and dynamic mechanical properties of several amorphous polymers

Jinrong Wu et al.

JOURNAL OF NON-CRYSTALLINE SOLIDS (2009)

Add to Collection

Article Materials Science, Ceramics

A brief discussion: Thermodynamic and dynamic fragilities, non-divergent dynamics and the Prigogine-Defay ratio

Gregory B. McKenna

JOURNAL OF NON-CRYSTALLINE SOLIDS (2009)

Add to Collection

Article Engineering, Chemical

Relaxation Map of PETg-Montmorillonite Composites: Nanofiller Concentration Influence on α and β Relaxation Processes

H. Couderc et al.

POLYMER ENGINEERING AND SCIENCE (2009)

Add to Collection

Review Engineering, Multidisciplinary

Effects of particle size, particle/matrix interface adhesion and particle loading on mechanical properties of particulate-polymer composites

Shao-Yun Fu et al.

COMPOSITES PART B-ENGINEERING (2008)

Add to Collection

Review Materials Science, Composites

Vibrations of carbon nanotubes and their composites: A review

Ronald F. Gibson et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2007)

Add to Collection

Article Materials Science, Ceramics

Correlation between dynamic fragility and glass transition temperature for different classes of glass forming liquids

Qian Qin et al.

JOURNAL OF NON-CRYSTALLINE SOLIDS (2006)

Add to Collection

Article Chemistry, Physical

Fragility of glass-forming polymer liquids

J Dudowicz et al.

JOURNAL OF PHYSICAL CHEMISTRY B (2005)

Add to Collection

Article Physics, Applied

Characterizing energy dissipation in single-walled carbon nanotube polycarbonate composites

NA Koratkar et al.

APPLIED PHYSICS LETTERS (2005)

Add to Collection

Article Materials Science, Composites

Interfacial damping characteristics of carbon nanotube-based composites

X Zhou et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2004)

Add to Collection

Article Polymer Science

Viscoelastic behavior of poly(methyl methacrylate) networks with different cross-linking degrees

NM Alves et al.

MACROMOLECULES (2004)

Add to Collection

Article Physics, Condensed Matter

The fragility of Al-Ni-based glass-forming melts

PC Si et al.

JOURNAL OF PHYSICS-CONDENSED MATTER (2003)

Add to Collection

Article Polymer Science

Fracture toughness of silica particulate-filled epoxy composite

T Adachi et al.

JOURNAL OF APPLIED POLYMER SCIENCE (2002)

Add to Collection

Article Multidisciplinary Sciences

A thermodynamic connection to the fragility of glass-forming liquids

LM Martinez et al.

NATURE (2001)

Add to Collection

© Peeref 2019-2024. All rights reserved.