☆ 4.7 Article

Experimental probe into the femtosecond laser ablation thresholds in carbon fiber reinforced polymer and assessment of the measurement theories

POLYMER COMPOSITES (2023)

Related references

Note: Only part of the references are listed.

Review Chemistry, Analytical

A Review of Research Progress on Machining Carbon Fiber-Reinforced Composites with Lasers

Junke Jiao et al.

Summary: Carbon fiber-reinforced composites are widely used in lightweight manufacturing in various industries due to their excellent mechanical properties. Laser machining technology has advantages in processing carbon fiber-reinforced composites, but there are also defects such as heat affected zone, delamination, and fiber extraction. Many works have been carried out to improve the quality of laser machining in carbon fiber-reinforced composites.

MICROMACHINES (2023)

Add to Collection

Article Materials Science, Composites

Laser assisted rapid 3D printing of continuous carbon fiber reinforced plastics: Simulation, characterization, and properties

Yiwen Tu et al.

Summary: 3D printing of continuous fiber reinforce plastics (CCFRP) with laser heating instead of traditional resistive heating improves printing speed and enhances the mechanical properties of printed parts.

POLYMER COMPOSITES (2023)

Add to Collection

Review Materials Science, Composites

A comprehensive review on performance and machinability of plant fiber polymer composites

Hemath Mohit et al.

Summary: The revolutionary use of plant fibers in polymer laminates has had a significant impact on environmental effects in recent years. The future focus is on combining eco-reinforcement and sustainable resins to meet the demand for high-efficiency, environmentally friendly, lightweight composite materials.

POLYMER COMPOSITES (2022)

Add to Collection

Review Engineering, Manufacturing

A review on the tooling technologies for composites manufacturing of aerospace structures: materials, structures and processes

Yong Li et al.

Summary: Tools are crucial in determining the accuracy, performance, and cost of composite structures manufacturing. Collaboration between industry and academia is necessary to explore new developments and provide lightweight, low cost, durable, and functional tools for high performance composite structures. Progress in materials, structures, and functionalities of tools for conventional and advanced composites manufacturing has been reviewed to bridge the current gap between industry and academia.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2022)

Add to Collection

Article Engineering, Manufacturing

Effect of Anisotropy on the Quality of Laser Cutting Corner of CFRP Plate

Wenyuan Li et al.

Summary: This article investigates the effects and issues of nanosecond UV laser cutting on different corners of CFRP plates. The results show that there are corner errors and thermal damage in laser corner cutting, and the severity of errors and damage varies with the corner angle and laser repetition rate.

JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME (2022)

Add to Collection

Article Materials Science, Composites

Study of the optical, thermal, morphological and mechanical characteristics of a laser weldable fiber reinforced polymer

Luiz R. R. Silva et al.

Summary: This study provides a detailed characterization of PBT-GF30 suitable for laser welding, investigating the thermal, optical, mechanical, and morphological characteristics of the material. Experimental and numerical analysis reveals the influence of thermal energy on the material behavior and identifies the detrimental effect of high temperatures on mechanical properties.

POLYMER COMPOSITES (2022)

Add to Collection

Review Materials Science, Composites

Joining processes of CFRP-Al sheets in automobile lightweighting technologies: A review

Shanling Han et al.

Summary: The future car body will be composed of various lightweight materials, including steel, aluminum-magnesium alloy, plastic, and carbon fiber reinforced polymer (CFRP). The joining of carbon fiber sheets with dissimilar sheets is a key technical problem to be solved in the development of hybrid material body. This paper reviews and describes the existing joining processes for carbon fiber composites and introduces the latest progress, aiming to broaden its application range and provide reference for the development of hybrid car body and lightweight.

POLYMER COMPOSITES (2022)

Add to Collection

Article Mechanics

Drilling induced defects on carbon fiber-reinforced thermoplastic polyamide and their effect on mechanical properties

Dieter Meinhard et al.

Summary: In this study, a carbon fiber-reinforced thermoplastic (CFRTP) laminate was drilled and evaluated. The dominant damage type was identified as burr formation, with no critical influence on the mechanical performance.

COMPOSITE STRUCTURES (2021)

Add to Collection

Article Materials Science, Composites

A novel palm sheath and sugarcane bagasse fiber based hybrid composites for automotive applications: An experimental approach

M. K. Marichelvam et al.

Summary: A novel hybrid composite material made from natural fibers and epoxy resin was developed and its mechanical properties were investigated. The best sample with optimal performance parameters was successfully applied to develop an automobile dashboard.

POLYMER COMPOSITES (2021)

Add to Collection

Article Mechanics

UV laser high-quality drilling of CFRP plate with a new interlaced scanning mode

Wenyuan Li et al.

Summary: An interlaced scanning mode (ISM) is proposed to improve the surface quality of carbon fibre reinforced polymers (CFRP) plate by reducing heat accumulation effect and surface defects compared to the default sequential scanning mode (SSM). Several experiments show that ISM can significantly reduce the overall average HAZ width and taper of the hole, leading to less damage in the HAZ and vicinity.

COMPOSITE STRUCTURES (2021)

Add to Collection

Article Optics

Temperature-dependent material removal during pulsed laser processing of CFRP composites

Nengru Tao et al.

Summary: Understanding the material removal mechanism and thermal characteristics in pulsed laser machining of CFRP composites is crucial for optimizing process parameters and strategies. However, current studies mainly focus on the effects of process parameters on heat affected zone size and processing efficiency, without fully revealing the formation mechanism of machining defects related to temperature characteristics.

OPTICS AND LASER TECHNOLOGY (2021)

Add to Collection

Proceedings Paper Optics

Picosecond laser ablation characteristics of satellite-used carbon fiber-reinforced composites

Mingyu Lu et al.

Summary: The characteristics of near-infrared picosecond laser ablation on graphitized carbon fiber-reinforced cyanate ester resin composites were studied, showing that the ablation threshold, morphology, and thickness of heat-affected zone can be controlled by adjusting processing parameters. Proper combination of scanning speed and incident fluence can result in well-defined grooves with clear edges and minimal heat-affected zones, indicating uniform removal of material's heterogeneous structure. Further optimization of processing parameters allowed for demonstrating the cutting of a large satellite-used carbon-fiber skin.

AOPC 2021: ADVANCED LASER TECHNOLOGY AND APPLICATIONS (2021)

Add to Collection

Article Materials Science, Composites

Mechanical, microstructural, and thermal characterization insights of pyrolyzed carbon black from waste tires reinforced epoxy nanocomposites for coating application

Akarsh Verma et al.

POLYMER COMPOSITES (2020)

Add to Collection

Article Chemistry, Physical

Investigations on the oxidation phenomenon of SiC/SiC fabricated by high repetition frequency femtosecond laser

Zhaoyang Zhai et al.

APPLIED SURFACE SCIENCE (2020)

Add to Collection

Article Materials Science, Composites

Whole-field strain analysis and strength prediction of fiber laser machined CFRP laminate at elevated temperature

Maojun Li et al.

POLYMER COMPOSITES (2020)

Add to Collection

Article Engineering, Manufacturing

Laser-based interfacial patterning enables toughening of CFRP/epoxy joints through bridging of adhesive ligaments

Ran Tao et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2020)

Add to Collection

Article Chemistry, Physical

On the Ablation Behavior of Carbon Fiber-Reinforced Plastics during Laser Surface Treatment Using Pulsed Lasers

Jana Gebauer et al.

MATERIALS (2020)

Add to Collection

Article Optics

Investigation of cut quality in fiber laser cutting of CFRP

Sehyeok Oh et al.

OPTICS AND LASER TECHNOLOGY (2019)

Add to Collection

Article Materials Science, Composites

Experimental investigation of surface defects in low-power CO2 laser engraving of glass fiber-reinforced polymer composite

Shashi Prakash

POLYMER COMPOSITES (2019)

Add to Collection

Article Materials Science, Composites

On the anisotropic behavior of electrodes for electrical-based monitoring of CFRP laminated composites

Khaled Almuhammadi et al.

POLYMER COMPOSITES (2019)

Add to Collection

Article Materials Science, Composites

The Effect of CO2 Laser-Induced Microhole Formations on Adhesive Bonding Strength of CFRP/CFRP Joints

Mustafa Ozgur Bora et al.

POLYMER COMPOSITES (2019)

Add to Collection

Article Materials Science, Composites

Experimental Analysis on Carbon Residuum Transformed Epoxy Resin: Chicken Feather Fiber Hybrid Composite

Akarsh Verma et al.

POLYMER COMPOSITES (2019)

Add to Collection

Article Optics

Picosecond-pulsed laser ablation of zinc: crater morphology and comparison of methods to determine ablation threshold

H. Mustafa et al.

OPTICS EXPRESS (2018)

Add to Collection

Review Engineering, Multidisciplinary

A review on machinability of carbon fiber reinforced polymer (CFRP) and glass fiber reinforced polymer (GFRP) composite materials

Meltem Altin Karatas et al.

DEFENCE TECHNOLOGY (2018)

Add to Collection

Article Optics

Surface treatment of CFRP composites using femtosecond laser radiation

V. Oliveira et al.

OPTICS AND LASERS IN ENGINEERING (2017)

Add to Collection

Article Engineering, Manufacturing

Heat conduction analysis of laser CFRP processing with IR and UV laser light

K. Takahashi et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2016)

Add to Collection

Proceedings Paper Engineering, Manufacturing

Wavelength and pulsewidth dependences of laser processing of CFRP

M. Fujita et al.

LASER ASSISTED NET SHAPE ENGINEERING 9 INTERNATIONAL CONFERENCE ON PHOTONIC TECHNOLOGIES PROCEEDINGS OF THE LANE 2016 (2016)

Add to Collection

Article Engineering, Manufacturing

Experimental study on the CO2 laser cutting of carbon fiber reinforced plastic composite

A. Riveiro et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2012)

Add to Collection

Proceedings Paper Nanoscience & Nanotechnology

Optimization of the volume ablation rate for metals at different laser pulse-durations from ps to fs

Beat Neuenschwander et al.

LASER APPLICATIONS IN MICROELECTRONIC AND OPTOELECTRONIC MANUFACTURING (LAMOM) XVII (2012)

Add to Collection

Article Nanoscience & Nanotechnology

Carbon fiber reinforced plastics in aircraft construction

C Soutis

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2005)

Add to Collection

Article Chemistry, Physical

The effect of damage accumulation behaviour on ablation thresholds and damage morphology in ultrafast laser micro-machining of common metals in air

PT Mannion et al.

APPLIED SURFACE SCIENCE (2004)

Add to Collection

Review Chemistry, Multidisciplinary

Models for laser ablation of polymers

N Bityurin et al.

CHEMICAL REVIEWS (2003)

Add to Collection

Article Materials Science, Multidisciplinary

Ultrashort-pulse laser ablation of indium phosphide in air

J Bonse et al.

APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING (2001)

Add to Collection

© Peeref 2019-2024. All rights reserved.