☆ 4.7 Article

Enhanced flexibility and ablative performance of silicone rubber by constructing an interpenetrating zirconium-containing polysiloxane double network

POLYMER (2023)

Related references

Note: Only part of the references are listed.

Article Materials Science, Ceramics

A novel B-Si-Zr hybridized ceramizable phenolic resin and the thermal insulation properties of its fiber-reinforced composites

Yi Xin et al.

Summary: A novel B-Si-Zr hybridized ceramicizable resin(BSZ-PR) was successfully fabricated by chemical reaction of boric acid, zirconium hydroxyl-containing polyhedral oligomeric silsesquioxane(Zr-POSS) and phenolic. The incorporation of boric acid and Zr-POSS improved the thermal stability of the resin effectively, and the flexural strength of carbon fiber/BSZ-PR and high silica fiber/BSZ-PR composites were increased significantly. Formation of ceramic structures such as SiO2, ZrO2 and SiC at high temperatures and extreme ablative conditions from BSZ-PR and its composites may be the key to the improved thermal, ablative properties.

CERAMICS INTERNATIONAL (2023)

Add to Collection

Article Materials Science, Multidisciplinary

Effect of zirconium on precursor chemistry, phase stability, and oxidation of polyvinylsilazane-derived SiCN ceramics

Rahul Anand et al.

Summary: This study focuses on the structural changes of polyvinylsilazane precursor upon modification by a molecular precursor of zirconium, and the processing of high temperature stable nanostructured SiCN and SiZrCNO ceramics. Zr doping improves the high temperature stability and oxidation resistance of SiCN ceramics, with the formation of t-ZrO2 nanocrystals at higher temperatures providing significant advantages for ceramic nanocomposites.

JOURNAL OF MATERIALS SCIENCE (2022)

Add to Collection

Article Materials Science, Multidisciplinary

Silicone-grafted epoxy/carbon fiber composites with superior mechanical/ablation performance

Youquan Ling et al.

Summary: The study demonstrates that silicone-grafted epoxy/CF composites have the potential to enhance mechanical properties and ablation resistance.

MATERIALS CHEMISTRY AND PHYSICS (2022)

Add to Collection

Article Polymer Science

Understanding the Role of Carbon Fiber Skeletons in Silicone Rubber-Based Ablative Composites

Yuan Ji et al.

Summary: This study explores the effect of carbon fiber length on the microstructure and ablation properties of silicone rubber-based ablative composites. It was found that carbon fibers longer than 3 mm can form a complete and continuous skeleton in the ceramic layer, leading to a decrease in ablation rate and back-face temperature.

POLYMERS (2022)

Add to Collection

Article Engineering, Mechanical

Unique crack propagation of double network hydrogels under high stretch

Ye Zhang et al.

Summary: Double network (DN) gels have significant resistance to crack initiation and propagation in highly stretched states. The crack growth velocity in DN gels exhibits a power-law relationship with the bulk energy release rate. Necking DN gels show a threshold behavior in which crack propagation transitions from slow to fast mode once the energy release rate exceeds a certain value.

EXTREME MECHANICS LETTERS (2022)

Add to Collection

Review Chemistry, Multidisciplinary

Zirconium Metal-Organic Cages: Synthesis and Applications

El-Sayed M. El-Sayed et al.

Summary: In recent years, the synthesis of porous crystalline materials, such as metal-organic frameworks and organic cages, with tunable atomic structures has shown great potential in various fields. Discrete metal-organic cages, in particular, have attracted attention due to their molecular nature and solution-processability. The zirconium MOC family, known for its robust nature and high hydrothermal stability, holds significant potential for expanding applications. This Account highlights recent advances in synthesizing zirconium MOCs and their applications in higher-dimensional frameworks.

ACCOUNTS OF CHEMICAL RESEARCH (2022)

Add to Collection

Article Engineering, Environmental

A room temperature self-healing and thermally reprocessable cross-linked elastomer with unprecedented mechanical properties for ablation-resistant applications

Yuanbo Cai et al.

Summary: In this work, a mechanically strong, fast room temperature self-healing and thermally recyclable crosslinked elastomer was prepared by constructing high-density hydrogen bonds and dynamic disulfide bonds. This material shows promise for thermal protection in the aerospace field.

CHEMICAL ENGINEERING JOURNAL (2022)

Add to Collection

Article Engineering, Environmental

Novel hybrid zirconium-silicone resin as high-temperature adhesive and an insight into the thermal resistance mechanism

Jing Jiang et al.

Summary: In this study, a novel hybrid zirconium-silicone resin with excellent heat resistance was successfully synthesized. The addition of zirconium greatly improved the thermal properties and bonding strength of the resin. Furthermore, the resin exhibited extraordinary storage stability, which greatly broadened its application prospects as a high-temperature resistant bonding material.

CHEMICAL ENGINEERING JOURNAL (2022)

Add to Collection

Article Materials Science, Composites

Synergetic effects of Kevlar fibers and polyimide powder fillers on performances of Poly(diaryloxyphosphazene) based elastomeric heat shielding materials

Jian Wu et al.

Summary: This study investigated the construction of dense and intact charred layers by combining KF and PIP into PDPP based EHSMs formulations, showing significant improvements in tensile strength and ablation properties with the addition of PIP. Furthermore, micro-CT was used for the first time to characterize the morphology of charred layers in ablative composites.

COMPOSITES SCIENCE AND TECHNOLOGY (2022)

Add to Collection

Article Chemistry, Applied

Mesophase pitch modified silicone rubber coatings with fence-like ceramic layer structures and excellent ablation resistance performance

Zhuodong Liu et al.

Summary: A series of mesophase pitch modified silicone rubber composites with superior ablation resistance performance were prepared, showing unique fence-like structures with good compressive strength. The 20MP composite exhibited the best ablation resistance performance, with porous and regular ceramic layers that helped resist flame ablation.

PROGRESS IN ORGANIC COATINGS (2022)

Add to Collection

Article Polymer Science

Enhancing Thermal Insulation of EPDM Ablators via Constructing Alternating Planar Architectures

Hongjian Qu et al.

Summary: Novel EPDM composites with alternating layers of ablative and heat-insulated layers were prepared, showing enhanced thermal insulation and mechanical properties. The composites have potential applications in the aerospace industry due to their mechanical robustness, good ablative resistance, and thermal insulation abilities.

POLYMERS (2022)

Add to Collection

Article Polymer Science

Improving ablation resistant properties of epoxy-silicone rubber composites via boron catalyzed graphitization and ceramization

Fei Chen et al.

Summary: In this paper, ablation resistant epoxy-silicone rubber composites were prepared, and the influence of boron on charring and ceramization process was systematically studied. After incorporating boron particles, the heat resistance and ablation resistance of the composite materials improved significantly, benefiting from the pore structure, strength, composition, and thermal conductivity of the ablation layers. The addition of 2.5wt% boron increased the maximum thermal decomposition temperature by 12.31%, and reduced the linear ablation rate and mass ablation rate by 34.86% and 36.11% respectively, compared to the control rubber composites. The catalytic mechanism suggests that the introduction of boron not only lowers the SiC generation temperature to promote ceramization but also compensates for carbon lattice defects to promote graphitization. This work is expected to provide new ideas and a theoretical basis for designing and preparing ablation resistant silicone-based composites.

JOURNAL OF POLYMER RESEARCH (2022)

Add to Collection

Article Materials Science, Ceramics

Polymer derived ZrO2 reinforced SiC-ZrB2 polycrystalline fiber

Peng Zhang et al.

Summary: In this study, a ZrO2 reinforced SiC-ZrB2 polycrystalline fiber was successfully prepared at a low temperature using the polymer-derived ceramic method. The formation of t-ZrO2 at relatively low temperature and the generation of high-quality fiber products after heat treatment were the most interesting findings. This study provides a novel method for the fabrication of SiC-based polycrystalline fiber at a low temperature.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2022)

Add to Collection

Article Materials Science, Composites

Thermal insulation and char layer mechanical properties of a novel ethylene propylene diene monomer composite reinforced with carbon nanotubes coated via chemical vapour deposition

Kun Xi et al.

Summary: This study proposes a solution to the reduced thermal insulation performance caused by carbon nanotubes (CNTs) in composite insulation materials, by pre-coating the CNTs with a carbon layer. The experimental results show that the coated-CNTs formulation significantly reduces thermal conductivity and improves the char layer strength of the insulation material. Overall, the coated-CNTs not only enhance the thermal insulation performance by reducing thermal conductivity, but also improve particle erosion resistance by strengthening the char layer.

COMPOSITES SCIENCE AND TECHNOLOGY (2021)

Add to Collection

Article Polymer Science

Reactions of Zirconium (IV) n-Propoxide with SiH-Functional Polysiloxanes as a Route to Siloxane-Zirconium Hybrid Materials with Enhanced Refractive Index

Slawomir Rubinsztajn et al.

Summary: The reaction between poly(hydromethylsiloxane-co-methylphenylsiloxane) and zirconium (IV) n-propoxide in dry toluene results in the formation of a siloxane-zirconium composite. The post-reaction solution containing heterosiloxane oligomers is stable under anhydrous conditions, but exposure to moisture leads to cross-linking and the formation of thin films with excellent light transparency and increased refractive index. The coatings are characterized using ellipsometry, UV-Vis, IR, and Si-29 MAS NMR spectroscopies.

MACROMOLECULAR RAPID COMMUNICATIONS (2021)

Add to Collection

Article Engineering, Environmental

Multi-phase SiZrOC nanofibers with outstanding flexibility and stability for thermal insulation up to 1400 ° C

Xiaoshan Zhang et al.

Summary: The study introduced multi-phase SiZrOC nanofibers with significantly low thermal conductivity, high flexibility, good mechanical strength, and excellent fire resistance, allowing for excellent thermal stability up to 1400 degrees Celsius. This material presents a novel strategy for the development of a wider range of high-temperature thermal insulating materials.

CHEMICAL ENGINEERING JOURNAL (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Ablation Response Behavior under Different Heat Flux Environments for Liquid Silicone Rubber Composites

Liwei Yan et al.

Summary: Liquid silicone rubber-based composites were used to investigate the response behavior of ablative materials under different hyperthermal environments. Computational fluid dynamics simulation showed that oxyacetylene flames have similar temperature distributions with different heat fluxes, but gas flow scouring force increases significantly with increasing heat flux. The ablation performance decreases with higher heat flux, mainly due to the hybrid coupling between mechanical denudation and oxidative erosion.

ACS APPLIED POLYMER MATERIALS (2021)

Add to Collection

Article Materials Science, Ceramics

Effect of triethanolamine on the crystallization behavior and kinetics of nano t-ZrO2 synthesized by microwave-assisted hydrothermal method

Yunchao Zhao et al.

Summary: The addition of mineralizer triethanolamine significantly improves the nucleation rate and crystallization rate of nano-ZrO2, with a recommended concentration of at least 0.3 M. The Avrami equation accurately describes the crystallization process of nano-ZrO2 crystallites.

CERAMICS INTERNATIONAL (2021)

Add to Collection

Article Materials Science, Composites

Effects of carbon nanotubes on char structure and heat transfer in ethylene propylene diene monomer composites at high temperature

MengFei Guo et al.

Summary: Carbon nanotubes can reduce the thermal conductivity and ablation rate of the char layer in EPDM composites at high temperatures by promoting vapor deposition of pyrolysis gases and forming a layer of pyrolytic carbon on their surface, leading to denser char layer structure.

COMPOSITES SCIENCE AND TECHNOLOGY (2021)

Add to Collection

Article Chemistry, Applied

Reactions of titanium alkoxide with SiH containing polymers as a route to titanium/siloxane hybrid materials with enhanced refractive index

Slawomir Rubinsztajn et al.

APPLIED ORGANOMETALLIC CHEMISTRY (2020)

Add to Collection

Article Polymer Science

Remarkable improvement of organic-to-inorganic conversion of silicone rubber at elevated temperature through platinum-nitrogen catalytic system

Tian Liu et al.

POLYMER DEGRADATION AND STABILITY (2020)

Add to Collection

Article Polymer Science

Effects of Zirconium Silicide on the Vulcanization, Mechanical and Ablation Resistance Properties of Ceramifiable Silicone Rubber Composites

Jiuqiang Song et al.

POLYMERS (2020)

Add to Collection

Article Materials Science, Ceramics

Flexible and thermal-stable SiZrOC nanofiber membranes with low thermal conductivity at high-temperature

Xiaoshan Zhang et al.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2020)

Add to Collection

Article Materials Science, Ceramics

Assessing fracture toughness in sintered Al2O3-ZrO2(3Y)-SiC ceramic composites through indentation technique

Jianlong Chai et al.

CERAMICS INTERNATIONAL (2020)

Add to Collection

Article Engineering, Multidisciplinary

Promoted ablation resistance of polydimethylsiloxane via crosslinking with multi-ethoxy POSS

Haodong Liu et al.

COMPOSITES PART B-ENGINEERING (2020)

Add to Collection

Article Polymer Science

Efficient organic-to-inorganic conversion of polysiloxane by novel platinum-thiol catalytic system

Tian Liu et al.

POLYMER DEGRADATION AND STABILITY (2020)

Add to Collection

Article Chemistry, Physical

Effect of the constituent networks of double-network gels on their mechanical properties and energy dissipation process

Tasuku Nakajima et al.

SOFT MATTER (2020)

Add to Collection

Article Materials Science, Ceramics

Size-controlled synthesis of spherical ZrO2 nanoparticles by reverse micelles-mediated sol-gel process

Hang Qin et al.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2019)

Add to Collection

Article Materials Science, Composites

Enhanced thermal resistance of carbon/phenolic composites by addition of novel nano-g-C3N4

Yuanyuan Ma et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2019)

Add to Collection

Article Chemistry, Physical

Coarsening kinetics of nanostructured ZrO2 in Zr-doped SiCN ceramic hybrids

Rahul Anand et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2019)

Add to Collection

Review Engineering, Chemical

Advances in Ablative Composites of Carbon Based Materials: A Review

Colonel Vijay Kumar et al.

INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2019)

Add to Collection

Review Polymer Science

Recent developments in elastomeric heat shielding materials for solid rocket motor casing application for future perspective

Kesiya George et al.

POLYMERS FOR ADVANCED TECHNOLOGIES (2018)

Add to Collection

Article Mechanics

Boron based fillers as char enhancers of EPDM based heat shielding materials for SRMs: A comparative analysis

Marco Rallini et al.

COMPOSITE STRUCTURES (2018)

Add to Collection

Article Engineering, Manufacturing

Thermal and ablation properties of EPDM based heat shielding materials modified with density reducer fillers

Marco Rallini et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2018)

Add to Collection

Article Polymer Science

Microstructure and ablation behavior of an affordable and reliable nanostructured Phenolic Impregnated Carbon Ablator (PICA)

Maurizio Natali et al.

POLYMER DEGRADATION AND STABILITY (2017)

Add to Collection

Article Polymer Science

Thermal protection characteristics of polydimethylsiloxane-organoclay nanocomposite

Ancy Smitha Alex et al.

POLYMER DEGRADATION AND STABILITY (2017)

Add to Collection

Article Materials Science, Ceramics

Reactive hot pressing of ZrB2-based composites with changes in ZrO2/SiC ratio and sintering conditions. Part II: Mechanical behavior

Nasser Pourmohammadie Vafa et al.

CERAMICS INTERNATIONAL (2016)

Add to Collection

Article Chemistry, Physical

Property improvement of room temperature vulcanized silicone elastomer by surface-modified multi-walled carbon nanotube inclusion

Yunfang Liu et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2016)

Add to Collection

Article Materials Science, Ceramics

Effects of Zr on the precursor architecture and high-temperature nanostructure evolution of SiOC polymer-derived ceramics

Chen Liu et al.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2016)

Add to Collection

Article Materials Science, Composites

Ablative properties and mechanisms of hot vulcanised silicone rubber (HVSR) composites containing different fillers

Y. Liu et al.

PLASTICS RUBBER AND COMPOSITES (2016)

Add to Collection

Article Polymer Science

Effect of Wollastonite on the ablation resistance of EPDM based elastomeric heat shielding materials for solid rocket motors

Maurizio Natali et al.

POLYMER DEGRADATION AND STABILITY (2016)

Add to Collection

Review Materials Science, Multidisciplinary

Science and technology of polymeric ablative materials for thermal protection systems and propulsion devices: A review

Maurizio Natali et al.

PROGRESS IN MATERIALS SCIENCE (2016)

Add to Collection

Article Chemistry, Physical

Improved Ablation Resistance of Silicone Rubber Composites by Introducing Montmorillonite and Silicon Carbide Whisker

Guangwu Zhang et al.

MATERIALS (2016)

Add to Collection

Article Materials Science, Multidisciplinary

Synthesis, characterization, and ceramization of a SiC-ZrC-C preceramic polymer precursor

Changqing Liu et al.

JOURNAL OF MATERIALS SCIENCE (2015)

Add to Collection

Article Polymer Science

Chemisorption and thermally induced transformations of polydimethylsiloxane on the surface of nanoscale silica and ceria/silica

Kostiantyn Kulyk et al.

POLYMER DEGRADATION AND STABILITY (2015)

Add to Collection

Article Polymer Science

Brittle-ductile transition of double network hydrogels: Mechanical balance of two networks as the key factor

Saika Ahmed et al.

POLYMER (2014)

Add to Collection

Article Polymer Science

Ablation and thermo-mechanical investigation of short carbon fiber impregnated elastomeric ablatives for ultrahigh temperature applications

M. Bassyouni et al.

POLYMER DEGRADATION AND STABILITY (2014)

Add to Collection

Article Materials Science, Ceramics

Ceramization and oxidation behaviors of silicone rubber ablative composite under oxyacetylene flame

Dong Yang et al.

CERAMICS INTERNATIONAL (2013)

Add to Collection

Article Engineering, Manufacturing

Silicone rubber ablative composites improved with zirconium carbide or zirconia

Dong Yang et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2013)

Add to Collection

Article Materials Science, Composites

Thermal insulation by heat resistant polymers for solid rocket motor insulation

Ashraf Fathy Ahmed et al.

JOURNAL OF COMPOSITE MATERIALS (2012)

Add to Collection

Article Materials Science, Composites

Phenolic matrix nanocomposites based on commercial grade resols: Synthesis and characterization

Maurizio Natali et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2010)

Add to Collection

© Peeref 2019-2024. All rights reserved.