☆ 4.7 Article

Drag reduction by flapping a pair of flexible filaments behind a cylinder

PHYSICS OF FLUIDS (2023)

Related references

Note: Only part of the references are listed.

Article Mechanics

Drag reduction by a rotationally oscillating cylinder with a flexible filament

Qian Mao et al.

Summary: The hydrodynamic mechanism of drag reduction by a rotationally oscillating cylinder with a flexible filament was explored using the penalty immersed boundary method. The study found that drag reduction is achieved through different mechanisms depending on the oscillation mode.

PHYSICS OF FLUIDS (2022)

Add to Collection

Article Mechanics

Harmonic forcing of a laminar bluff body wake with rear pitching flaps

Athanasios Emmanouil Giannenas et al.

Summary: A numerical study was conducted to investigate the response of a two-dimensional bluff body wake subjected to harmonic forcing by two rear pitching flaps. The study found that near the resonant regime, the wake intensity and drag increased, while away from the resonant regime, the wake symmetrisation and propulsion mechanisms led to a significant drag reduction.

JOURNAL OF FLUID MECHANICS (2022)

Add to Collection

Article Mechanics

Drag reduction by flapping a flexible filament behind a stationary cylinder

Qian Mao et al.

Summary: This study investigated the hydrodynamic mechanism of drag reduction by flapping a flexible filament behind a stationary cylinder using the penalty immersed boundary method. The effects of filament parameters on drag reduction were examined, and three distinct flapping modes were observed. The oscillation and undulation modes were found to be more beneficial for drag reduction than the vortex-dominated mode.

PHYSICS OF FLUIDS (2022)

Add to Collection

Article Engineering, Mechanical

Numerical analysis of the flow-induced vibrations in the laminar wake behind a blunt body with rear flexible cavities

C. Garcia-Baena et al.

Summary: This study focuses on the fluid-structure interaction of an incompressible laminar flow around a slender blunt-based body with a rear cavity of flexible plates. The effects of various control parameters on the flow-induced vibrations and flow dynamics are evaluated, and it is found that the lock-in regime is the best for energy extraction from the flow.

JOURNAL OF FLUIDS AND STRUCTURES (2021)

Add to Collection

Article Mechanics

Collective locomotion of two uncoordinated undulatory self-propelled foils

Huiyang Yu et al.

Summary: This study investigates the collective locomotion of fish modeled as undulatory self-propelled foils in tandem configuration with different amplitude and frequency ratios. The results reveal a phase diagram of locomotion modes that differs significantly from previous studies. It also demonstrates the phenomenon of inverted drafting in fast stable position cases, where the leader gains hydrodynamic advantages. Additionally, the cruising speed increases piecewise linearly with FrAr in the stable cycle mode.

PHYSICS OF FLUIDS (2021)

Add to Collection

Article Mechanics

Flow past a rotationally oscillating cylinder with an attached flexible filament

Puja Sunil et al.

Summary: Experimental studies were conducted on a rotationally oscillating cylinder with an attached flexible filament at a Reynolds number of 150 to investigate the effect of cylinder forcing parameters and filament stiffness on the wake structure. The transition from a Karman vortex street to a reverse Kaman vortex street was observed over a certain range of Strouhal number, and maximum thrust was generated at the instants when vortices were shed in the wake from the filament tip. Filament flexibility was found to delay the formation of an asymmetric wake, indicating that wake symmetry is governed by the timing of vortex pair shedding from the filament tip.

JOURNAL OF FLUID MECHANICS (2021)

Add to Collection

Article Acoustics

Flow-induced vibrations of a hinged cavity at the rear of a blunt-based body subject to laminar flow

J. I. Jimenez-Gonzalez et al.

Summary: Numerical simulations were conducted to study the flow-induced vibrations (FIV) of a rear cavity with elastically hinged rigid plates under laminar flow conditions of Reynolds number Re = 400. The study identified three different regimes of rotational oscillations, with varying amplitudes and frequencies. Additionally, a multibody model was developed to analyze the resulting forces and moments that drive the plates' vibration.

JOURNAL OF SOUND AND VIBRATION (2021)

Add to Collection

Article Mechanics

Influence of flexible fins on vortex-induced load over a circular cylinder at low Reynolds number

Abhishek Banerjee et al.

Summary: This study investigates the impact of fin flexibility on reducing vortex-induced forces, revealing that an increase in fin flexibility leads to loss of stability and different dynamic responses. As flexibility increases, fins undergo a coupled flapping motion, showing three distinct response regimes based on flexural rigidity. The study highlights the effectiveness of fin flexibility and inclination angle in minimizing vortex-induced forces.

PHYSICS OF FLUIDS (2021)

Add to Collection

Article Mechanics

Flow-induced vibration of a flexible splitter-plate in the wake of a stationary cylinder

Charu Mittal et al.

Summary: The study numerically investigates the effects of Reynolds number, gap, and plate length on the vibration characteristics of a flexible plate across a circular cylinder. The research reveals correlations between plate dynamics and flow phenomena, including vortex formation and interaction modes.

PHYSICS OF FLUIDS (2021)

Add to Collection

Article Mechanics

Drag reduction by a flexible afterbody

Qian Mao et al.

Summary: The study explored the hydrodynamic mechanism of drag reduction by a flexible afterbody, showing that an appropriately shaped flexible afterbody can delay vortex formation, weaken resistance, and active flapping negatively affects drag reduction. Increasing Reynolds number can reduce drag, while drag is insensitive to kinetic energy but sensitive to the flapping amplitude of the flexible afterbody as Reynolds number increases.

PHYSICS OF FLUIDS (2021)

Add to Collection

Article Mechanics

Multiple lock-ins in vortex-induced vibration of a filament

Mohd Furquan et al.

Summary: The study investigates the vortex-induced vibration of a flexible filament attached behind a stationary cylinder. Lock-in phenomenon and responses of multiple normal modes were observed. Different shedding modes were identified during the flow, showing systematic variations in both amplitude and frequency.

JOURNAL OF FLUID MECHANICS (2021)

Add to Collection

Article Mechanics

Computational analysis of hydrodynamic interactions in a high-density fish school

Yu Pan et al.

PHYSICS OF FLUIDS (2020)

Add to Collection

Article Mechanics

Phase-mediated locomotion of two self-propelled flexible plates in a tandem arrangement

Jaeha Ryu et al.

PHYSICS OF FLUIDS (2020)

Add to Collection

Article Engineering, Aerospace

Reynolds Number Scaling of the Propulsive Performance of a Pitching Airfoil

Utku Senturk et al.

AIAA JOURNAL (2019)

Add to Collection

Article Mechanics

Numerical study of flow-induced vibration of a circular cylinder with attached flexible splitter plate at low Re

Tulsi Ram Sahu et al.

JOURNAL OF FLUID MECHANICS (2019)

Add to Collection

Article Mechanics

Hydrodynamics of flexible fins propelled in tandem, diagonal, triangular and diamond configurations

Sung Goon Park et al.

JOURNAL OF FLUID MECHANICS (2018)

Add to Collection

Article Engineering, Mechanical

Flow control around a circular cylinder with swinging thin plates

Babak Bagherzadeh Chehreh et al.

JOURNAL OF FLUIDS AND STRUCTURES (2018)

Add to Collection

Article Mechanics

Wall-attached structures of velocity fluctuations in a turbulent boundary layer

Jinyul Hwang et al.

JOURNAL OF FLUID MECHANICS (2018)

Add to Collection

Article Thermodynamics

Self-propelled heaving and pitching flexible fin in a quiescent flow

Boyoung Kim et al.

INTERNATIONAL JOURNAL OF HEAT AND FLUID FLOW (2016)

Add to Collection

Article Mechanics

Inner-outer interactions of large-scale structures in turbulent channel flow

Jinyul Hwang et al.

JOURNAL OF FLUID MECHANICS (2016)

Add to Collection

Article Mechanics

Self-propelled flexible fin in the wake of a circular cylinder

Sung Goon Park et al.

PHYSICS OF FLUIDS (2016)

Add to Collection

Article Mechanics

Direct measurement of thrust and efficiency of an airfoil undergoing pure pitching

A. W. Mackowski et al.

JOURNAL OF FLUID MECHANICS (2015)

Add to Collection

Article Mathematics, Applied

A momentum exchange-based immersed boundary-lattice Boltzmann method for simulating a flexible filament in an incompressible flow

Hai-Zhuan Yuan et al.

COMPUTERS & MATHEMATICS WITH APPLICATIONS (2014)

Add to Collection

Article Mechanics

Investigation of flow characteristics around a stationary circular cylinder with an undulatory plate

J. Wu et al.

EUROPEAN JOURNAL OF MECHANICS B-FLUIDS (2014)

Add to Collection

Article Engineering, Mechanical

Numerical study of flow control via the interaction between a circular cylinder and a flexible plate

J. Wu et al.

JOURNAL OF FLUIDS AND STRUCTURES (2014)

Add to Collection

Article Mechanics

Flow control of a circular cylinder by using an attached flexible filament

J. Wu et al.

PHYSICS OF FLUIDS (2014)

Add to Collection

Article Mechanics

Study of vortex-shedding-induced vibration of a flexible splitter plate behind a cylinder

Jinmo Lee et al.

PHYSICS OF FLUIDS (2013)

Add to Collection

Article Mechanics

Comparison of very-large-scale motions of turbulent pipe and boundary layer simulations

Jae Hwa Lee et al.

PHYSICS OF FLUIDS (2013)

Add to Collection

Article Computer Science, Interdisciplinary Applications

Vortex shedding characteristics of a circular cylinder with an oscillating wake splitter plate

Y. Sudhakar et al.

COMPUTERS & FLUIDS (2012)

Add to Collection

Article Computer Science, Interdisciplinary Applications

An improved penalty immersed boundary method for fluid-flexible body interaction

Wei-Xi Huang et al.

JOURNAL OF COMPUTATIONAL PHYSICS (2011)

Add to Collection

Article Mechanics

Numerical study of flow characteristics behind a stationary circular cylinder with a flapping plate

J. Wu et al.

PHYSICS OF FLUIDS (2011)

Add to Collection

Article Mechanics

Three-dimensional simulation of a flapping flag in a uniform flow

Wei-Xi Huang et al.

JOURNAL OF FLUID MECHANICS (2010)

Add to Collection

Article Engineering, Multidisciplinary

Numerical simulation of laminar flow past a circular cylinder

B. N. Rajani et al.

APPLIED MATHEMATICAL MODELLING (2009)

Add to Collection

Article Computer Science, Interdisciplinary Applications

Assessment of regularized delta functions and feedback forcing schemes for an immersed boundary method

Soo Jai Shin et al.

INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN FLUIDS (2008)

Add to Collection

Article Computer Science, Interdisciplinary Applications

hSimulation of flexible filaments in a uniform flow by the immersed boundary method

Wei-Xi Huang et al.

JOURNAL OF COMPUTATIONAL PHYSICS (2007)

Add to Collection

Article Computer Science, Interdisciplinary Applications

An immersed interface method for simulating the interaction of a fluid with moving boundaries

Sheng Xu et al.

JOURNAL OF COMPUTATIONAL PHYSICS (2006)

Add to Collection

Article Computer Science, Interdisciplinary Applications

An implicit velocity decoupling procedure for the incompressible Navier-Stokes equations

K Kim et al.

INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN FLUIDS (2002)

Add to Collection

Article Thermodynamics

Development of a near-wall turbulence model and application to jet impingement heat transfer

TS Park et al.

INTERNATIONAL JOURNAL OF HEAT AND FLUID FLOW (2001)

Add to Collection

© Peeref 2019-2024. All rights reserved.