4.7 Article

Experimental study on the evolution of pore structure of coal samples under freeze-thaw

Related references

Note: Only part of the references are listed.
Article Thermodynamics

Quantitative characterization of the pore volume fractal dimensions for three kinds of liquid nitrogen frozen coal and its enlightenment to coalbed methane exploitation

Lei Qin et al.

Summary: Liquid nitrogen fracturing technology is crucial for improving the permeability of coal seams and enhancing unconventional natural gas extraction. Research has shown that freezing coal with liquid nitrogen can effectively expand the coal pores, thereby promoting the migration and drainage of coalbed methane. These findings have significant implications for further research on liquid nitrogen fracturing technology.

ENERGY (2023)

Article Engineering, Chemical

Investigation of the breaking manifestations of bedded shale impacted by a high-pressure abrasive water jet

Fei Huang et al.

Summary: Experiments were conducted to study the effects of high-pressure abrasive water jet (AWJ) on shale crushing, with a focus on bedding planes. The angle between the jet direction and bedding plane was found to play a dominant role in the rock-breaking manifestation, leading to either deep perforation holes or split-shaped breakage. The results suggest that a combination of a large angle, suitable jet pressure, and abrasive mass flow rate is required for hydraulic AWJ perforation in shale gas exploitation.

POWDER TECHNOLOGY (2022)

Article Mechanics

Experimental study on the mechanical properties, permeability characteristics, and energy evolution of gas-containing anthracite coal under different loading-unloading speeds

Yapei Chu et al.

Summary: This study analyzes the mechanical properties, permeability characteristics, and energy evolution of coal seams at different loading-unloading speeds. The results show that increasing loading-unloading speeds decrease the strength of coal samples and increase permeability, which has an impact on the occurrence of coal and gas outburst.

PHYSICS OF FLUIDS (2022)

Article Energy & Fuels

Experimental study on mechanical properties, acoustic emission characteristics and energy evolution of coal samples after freezing with liquid nitrogen

Yapei Chu et al.

Summary: The use of liquid nitrogen fracturing technology in the petroleum/energy industry has gained interest due to its limited water consumption and non-pollution compared to conventional hydraulic fracturing. This study investigates the effects of LN2 freezing and freeze-thaw on coal samples by analyzing their mechanical properties and acoustic emission characteristics. The results show that LN2 freezing and freeze-thaw can damage the coal samples' structure, decrease their P-wave velocity and uniaxial compressive strength, and reduce acoustic emission events and energy.
Article Thermodynamics

Heat-mass transfer coupling effects in water-ice phase transformation of water-bearing coal frozen with liquid nitrogen

Min Yan et al.

Summary: This study systematically investigated the heat-flow coupling problem of LN2 fracturing coal mass through numerical simulation. The results showed that the most obvious heat mass transfer occurred in the coal mass area close to the LN2 inlet, indicating significant anisotropic characteristics in the changes of temperature and water-ice phase.

APPLIED THERMAL ENGINEERING (2022)

Article Energy & Fuels

Liquid CO2 injection to enhance coalbed methane recovery: An experiment and in-situ application test

Gaoming Wei et al.

Summary: Recent studies have shown that liquid CO2 injection can increase the recovery rate of coalbed methane, with the sweep efficiency of CH4 recovery reaching over 92.0% under low-pressure injection. The competitive adsorption between CO2 and CH4 enhances CH4 recovery, while the dilution effect of high-concentration CO2 leads to inefficiency in methane extraction. In-situ tests in Chinese mining areas have demonstrated that the effective migration radius of CO2 in coalbeds can exceed 15m, significantly improving methane extraction rates and reducing extraction times.
Article Economics

Analysis and forecast of China's energy consumption structure

Sheng Zeng et al.

Summary: China has made significant progress in optimizing its energy structure, and is expected to achieve its carbon emission targets in the future and complete the carbon emission target per unit of GDP ahead of schedule.

ENERGY POLICY (2021)

Article Engineering, Chemical

Comparative investigation of the damage of coal subjected to pure water jets, ice abrasive water jets and conventional abrasive water jets

Fei Huang et al.

Summary: This study proposed the use of ice abrasive water jets (IAWJs) for coal slotting, showing that IAWJs have better breaking performance and lower specific energy consumption compared to pure water jets (PWJs) and conventional abrasive water jets (CAWJs).

POWDER TECHNOLOGY (2021)

Article Thermodynamics

Visualized study on the mechanism of temperature effect on coal during liquid nitrogen cold shock

Yuzhou Cong et al.

Summary: This study investigates the mechanism of temperature effect on coal during cold shock caused by anhydrous low-temperature liquid nitrogen. The research found that the temperature and strain distributions of coal around the drill hole are uneven during cold shock, with obvious temperature gradient and strain-concentrated area. By establishing a hierarchical thermal stress calculation model, the variations of radial thermal stress based on temperature difference and strain were analyzed after 30 minutes of cold shock.

APPLIED THERMAL ENGINEERING (2021)

Article Engineering, Geological

Experimental Study on the Damage and Cracking Characteristics of Bedded Coal Subjected to Liquid Nitrogen Cooling

Menglin Du et al.

Summary: Liquid nitrogen cooling can cause significant cracking damage in coalbed methane reservoirs, leading to deterioration in mechanical properties and easier cracking and fragmentation. The failure mode after cooling varies at different bedding angles, with a transition to tensile failure at a 60 degrees angle.

ROCK MECHANICS AND ROCK ENGINEERING (2021)

Review Energy & Fuels

A review of liquid nitrogen fracturing technology

Zhongwei Huang et al.

Article Engineering, Mechanical

Study on Lateral Jetting Range During an Arc-Curved Jet Impacting Nonplanar Solid Surfaces

Fei Huang et al.

JOURNAL OF FLUIDS ENGINEERING-TRANSACTIONS OF THE ASME (2018)

Review Energy & Fuels

China's coalbed methane development: A review of the challenges and opportunities in subsurface and surface engineering

Hangyu Li et al.

JOURNAL OF PETROLEUM SCIENCE AND ENGINEERING (2018)

Article Engineering, Mechanical

A numerical study on the transient impulsive pressure of a water jet impacting nonplanar solid surfaces

Fei Huang et al.

JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY (2018)

Article Metallurgy & Metallurgical Engineering

Microscopic damage and dynamic mechanical properties of rock under freeze-thaw environment

Ke-ping Zhou et al.

TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA (2015)

Article Engineering, Environmental

Changes in microstructure and physical properties of rocks caused by artificial freeze-thaw action

Jihwan Park et al.

BULLETIN OF ENGINEERING GEOLOGY AND THE ENVIRONMENT (2015)

Article Engineering, Environmental

Laboratory investigations on the mechanical properties degradation of granite under freeze-thaw cycles

Xianjun Tan et al.

COLD REGIONS SCIENCE AND TECHNOLOGY (2011)