☆ 4.5 Article

A fiber Bragg grating acceleration sensor based on a circular flexure hinge structure for medium- and high-frequency vibration measurements

OPTIK (2023)

Related references

Note: Only part of the references are listed.

Article Optics

Temperature-compensated optical fiber magnetic field sensor with cascaded femtosecond laser micromachining hollow core fiber and fiber loop

Xi-xin Wang et al.

Summary: A fiber magnetic field sensor with temperature compensation is proposed and experimentally verified using Fabry-Perot interferometer and multimode interferometer. By utilizing these two interferometers, the sensor achieves both magnetic field sensing and temperature compensation, with high sensitivity and low cost.

OPTICS AND LASER TECHNOLOGY (2023)

Add to Collection

Article Optics

A novel short fiber Bragg grating accelerometer based on a V-type dual mass block structure for low- and medium-frequency vibration measurements

Hoang-Dang Le et al.

Summary: This paper presents a novel short fiber Bragg grating (FBG) accelerometer based on a dual mass block structure. The sensor is established on a solid, symmetrical design comprising a V-type beam. The FBG accelerometer configuration causes the FBG fiber to distort twice as much when subjected to external vibration. Theoretical research and optimization of the sensor's natural frequency and sensitivity are performed using MATLAB software, while static structural stress and modal simulation analysis are examined using ANSYS software. An experimental test is conducted to evaluate the sensor's implementation. The sensor has a natural frequency of 880 Hz, with a flat stability frequency response in the 20-340 Hz low-to-middle frequency range. The average sensitivity shows a linearity of approximately 66.95 pm/g, and the transverse anti-interference of the FBG fiber is around 6.53%. This work proposes a suitable method to observe low-and medium-frequency vibration signals in large-scale applications.

OPTICS AND LASER TECHNOLOGY (2023)

Add to Collection

Article Engineering, Electrical & Electronic

Fiber Bragg grating accelerometer based on symmetrical double flexure hinges

Xiaodong Luo et al.

Summary: A compact fiber Bragg grating accelerometer based on symmetrical double flexure hinges structure is designed and demonstrated, with good linear response and high sensitivity, capable of measuring vibration acceleration in a wide frequency range.

OPTICAL FIBER TECHNOLOGY (2022)

Add to Collection

Article Optics

A process modeling approach for micro drilling of aerospace alloys with a waterjet guided laser system

Levent Subasi et al.

Summary: Laser drilling is an effective method for creating cooling holes on gas turbine parts. Waterjet guided laser (WJGL) is a hybrid process that offers improved machining results by coupling a laser beam with a thin cylindrical waterjet. It has potential for micro drilling operations on aerospace jet engine parts. However, further research is needed to understand the effects of process variables on material removal rate.

OPTICS AND LASER TECHNOLOGY (2022)

Add to Collection

Review Engineering, Multidisciplinary

Fibre-optic sensor and deep learning-based structural health monitoring systems for civil structures: A review

U. M. N. Jayawickrema et al.

Summary: This paper reviews the latest developments in the use of emerging OFS and DL-based applications in SHM in civil engineering, providing an overall understanding of various SHM applications. Additionally, current research trends and future research needs are identified.

MEASUREMENT (2022)

Add to Collection

Article Automation & Control Systems

Acceleration sensor of medium-high frequency dual FBG based on L-shaped support sensitization structure

Zhongchao Qiu et al.

Summary: A FBG acceleration sensor based on flexure hinge is proposed in this research to improve the sensitivity and eliminate adverse effects caused by temperature changes. The sensor is optimized and calibrated using simulation and experimentation. The research results show that the sensor has good linearity and high sensitivity.

MEASUREMENT & CONTROL (2022)

Add to Collection

Article Optics

Miniature bending-resistant fiber grating accelerometer based on a flexible hinge structure

Lei Liang et al.

Summary: A miniaturized fiber Bragg grating accelerometer based on flexible hinges is proposed in this paper to meet the special requirements for the size and quality of accelerometers in vibration monitoring. The accelerometer utilizes a flexible hinge as an elastic body and achieves miniaturization through a suspended arc package. The bending-resistant optical fiber grating effectively solves the issue of light loss in arc-shaped packaging. The experimental results demonstrate that the prepared accelerometer has excellent performance in terms of size, mass, and sensing characteristics, making it suitable for medium and low frequency vibration monitoring in narrow spaces.

OPTICS EXPRESS (2022)

Add to Collection

Article Optics

A flexible multiplexing method of FBG sensors based on OFDR

Ning Yang et al.

Summary: This paper proposes a flexible multiplexing method for fiber Bragg grating (FBG) sensors based on optical frequency domain reflectometer (OFDR) to reduce the influence of spectral shadow effect on measurement and improve the reliability and measurement flexibility of FBG sensing network. The method allows for flexible multiplexing of multi-channel FBGs with a single acquisition channel while maintaining measurement accuracy.

OPTIK (2022)

Add to Collection

Article Optics

Distributed strain sensing, employing apodized ?-phase shifted FBG: Application in power transformer oil breakdown detection br

Vahid Talebi et al.

Summary: This article presents a distributed strain sensing system based on Fiber Bragg Grating (FBG) for detecting power transformer oil breakdown. By adjusting the phase shift and applying suitable apodization function, the sensitivity and measurement range of the system can be greatly improved.

OPTIK (2022)

Add to Collection

Article Engineering, Electrical & Electronic

Miniature Structure Optimization of Small-Diameter FBG-Based One-Dimensional Optical Fiber Vibration Sensor

Han Song et al.

Summary: This paper presents a miniature vibration sensor based on a small-diameter fiber Bragg grating, which is optimized for size and sensitivity using a genetic algorithm and fabricated through metal 3D printing, demonstrating superior performance compared to ordinary FBG sensors.

IEEE SENSORS JOURNAL (2021)

Add to Collection

Article Chemistry, Analytical

A Medium-Frequency Fiber Bragg Grating Accelerometer Based on Flexible Hinges

Zichuang Li et al.

Summary: A novel medium-frequency accelerometer, based on fiber Bragg grating and flexible hinges, has been proposed in this paper. The differential structure doubles the sensitivity of the sensor while avoiding temperature effects. The proposed sensor shows good temperature self-compensation function and lateral anti-interference capability.

SENSORS (2021)

Add to Collection

Article Multidisciplinary Sciences

Hinge-type FBG acceleration sensor based on double elastic plate

Zhongchao Qiu et al.

Summary: A new hinge-type FBG acceleration sensor based on double elastic plate is proposed to improve the sensitivity and transverse anti-interference of medium-frequency and high-frequency vibration signals monitoring in large-scale structures.

SCIENTIFIC REPORTS (2021)

Add to Collection

Article Engineering, Multidisciplinary

Enhanced processing of low signal-to-noise-ratio dynamic signals from pavement testing

Hao Han et al.

Summary: This study investigated the use of low-pass filtering and wavelet filtering to de-noise pavement structure dynamic response data, proposed the adaptive maximum energy ratio and standard deviation methods to identify peak and valley response areas, and developed an automated data processing software that can accurately identify dynamic responses on pavements.

MEASUREMENT (2021)

Add to Collection

Review Optics

Optical fiber sensing for marine environment and marine structural health monitoring: A review

Rui Min et al.

Summary: Optical fiber sensors have advantages such as resistance to electromagnetic interference, durability under extreme conditions, high transmission rate, small size, and flexibility, making them attractive for marine environment and structural health monitoring. They can be used for various sensing applications and are expected to have widespread use in marine research in the future.

OPTICS AND LASER TECHNOLOGY (2021)

Add to Collection

Article Multidisciplinary Sciences

A multi-cantilever beam low-frequency FBG acceleration sensor

Li Hong et al.

Summary: This study addresses the issue of low sensitivity in FBG acceleration sensors for low-frequency vibration measurements by proposing a multi-cantilever beam low-frequency FBG acceleration sensor. The sensor, optimized through simulation analysis, exhibits high sensitivity and low transverse crosstalk, making it suitable for monitoring low-frequency vibration signals within the range of 16-54Hz. Performance tests show that the sensor has a sensitivity of approximately 87.955 pm/m s^(-2), with a linearity exceeding 99% and a transverse interference immunity below 2.58%.

SCIENTIFIC REPORTS (2021)

Add to Collection

Article Engineering, Multidisciplinary

Magnetic field-based arc stability sensor for electric arc furnaces

Asier Vicente et al.

MEASUREMENT (2020)

Add to Collection

Article Optics

Measurement of moisture content in lubricating oils of high-speed rail gearbox by Vis-NIR spectroscopy

Chenyang Liu et al.

OPTIK (2020)

Add to Collection

Article Engineering, Electrical & Electronic

A Novel Miniaturized Fiber Bragg Grating Vibration Sensor

Li Wei et al.

IEEE SENSORS JOURNAL (2019)

Add to Collection

Article Engineering, Electrical & Electronic

Design of Multichannel and Multihop Low-Power Wide-Area Network for Aircraft Vibration Monitoring

Shang Gao et al.

IEEE TRANSACTIONS ON INSTRUMENTATION AND MEASUREMENT (2019)

Add to Collection

Article Engineering, Electrical & Electronic

High-Frequency Optical Fiber Bragg Grating Accelerometer

Xiaofeng Wang et al.

IEEE SENSORS JOURNAL (2018)

Add to Collection

Article Engineering, Electrical & Electronic

Design and Analysis of a Novel Dual FBG Accelerometer Based on Lantern Shape Metallic Shells

Jing Zhu et al.

IEEE SENSORS JOURNAL (2017)

Add to Collection

Article Engineering, Electrical & Electronic

2-D Medium-High Frequency Fiber Bragg Gratings Accelerometer

Yunshan Zhang et al.

IEEE SENSORS JOURNAL (2017)

Add to Collection

Article Instruments & Instrumentation

The Application of Vibration Accelerations in the Assessment of Average Friction Coefficient of a Railway Brake Disc

Wojciech Sawczuk

MEASUREMENT SCIENCE REVIEW (2017)

Add to Collection

Article Engineering, Electrical & Electronic

Theoretical and experimental study on FBG accelerometer based on multi-flexible hinge mechanism

Lei Qiu et al.

OPTICAL FIBER TECHNOLOGY (2017)

Add to Collection

Article Optics

Research on a vibration signal analysis method for motor bearing

Huimin Zhao et al.

OPTIK (2016)

Add to Collection

Article Chemistry, Analytical

Analysis and Optimization of Thermodiffusion of an FBG Sensor in the Gas Nitriding Process

Tso-Sheng Hsieh et al.

MICROMACHINES (2016)

Add to Collection

Article Optics

Application study on FBG sensor applied to hull structural health monitoring

Wei Shen et al.

OPTIK (2015)

Add to Collection

Article Engineering, Electrical & Electronic

Optimization design for medium-high frequency FBG accelerometer with different eigenfrequency and sensitivity

G. L. Yin et al.

SENSORS AND ACTUATORS A-PHYSICAL (2015)

Add to Collection

Article Optics

Medium-high frequency FBG accelerometer with integrative matrix structure

Yutang Dai et al.

APPLIED OPTICS (2015)

Add to Collection

Article Engineering, Electrical & Electronic

Large Frequency Range and High Sensitivity Fiber Bragg Grating Accelerometer Based on Double Diaphragms

Qinpeng Liu et al.

IEEE SENSORS JOURNAL (2014)

Add to Collection

Article Engineering, Electrical & Electronic

Design optimization of fiber Bragg grating accelerometer for maximum sensitivity

Nandini Basumallick et al.

SENSORS AND ACTUATORS A-PHYSICAL (2013)

Add to Collection

Article Optics

A fiber bragg grating acceleration sensor interrogated by a DFB laser diode

J. Chang et al.

LASER PHYSICS (2009)

Add to Collection

Article Instruments & Instrumentation

Design calculations for flexure hinges

YF Wu et al.

REVIEW OF SCIENTIFIC INSTRUMENTS (2002)

Add to Collection

© Peeref 2019-2024. All rights reserved.