☆ 4.7 Article

A novel short fiber Bragg grating accelerometer based on a V-type dual mass block structure for low- and medium-frequency vibration measurements

OPTICS AND LASER TECHNOLOGY (2023)

Related references

Note: Only part of the references are listed.

Article Optics

In-place fiber-optic inclinometer based on a vertical cantilever beam and dual FBGs

Cong Zhang et al.

Summary: A new fiber-optic inclinometer (FOI) is developed, featuring a robust design, bidirectional large range, multiplexing capability, and temperature insensitivity. The FOI utilizes a vertical cantilever beam with dual fiber Bragg gratings (FBGs) to achieve accurate measurements. Experimental results demonstrate the high sensitivity, resolution, and bidirectional measurement range of the proposed inclinometer.

OPTICS AND LASER TECHNOLOGY (2023)

Add to Collection

Article Engineering, Electrical & Electronic

Fiber Bragg grating accelerometer based on symmetrical double flexure hinges

Xiaodong Luo et al.

Summary: A compact fiber Bragg grating accelerometer based on symmetrical double flexure hinges structure is designed and demonstrated, with good linear response and high sensitivity, capable of measuring vibration acceleration in a wide frequency range.

OPTICAL FIBER TECHNOLOGY (2022)

Add to Collection

Article Engineering, Electrical & Electronic

Medium and low frequency fiber Bragg grating acceleration sensor based on single-sided single-arc hinge

Min Shao et al.

Summary: This study designs and demonstrates a medium and low frequency fiber Bragg grating (FBG) based acceleration sensor with a single-axis single-arc hinge-shaped sensitization structure. The theoretical formula for the sensor's resonance frequency and sensitivity is provided, and the stress distribution, characteristic frequency, and amplitude frequency characteristics of the sensor are simulated and optimized. Experimental results show that the sensor has a resonance frequency of 630 Hz, a flat frequency range of 30-300 Hz, and an acceleration sensitivity of 57.77 pm/g. The sensor exhibits high sensitivity, a wide flat frequency range, and strong transverse anti-interference ability, meeting the requirements for acceleration detection in the petroleum exploration field.

OPTICAL FIBER TECHNOLOGY (2022)

Add to Collection

Review Optics

Review of femtosecond laser machining technologies for optical fiber microstructures fabrication

Mao-qing Chen et al.

Summary: By using femtosecond (fs) laser micro-machining technology to fabricate sensing structures, the accuracy limits of traditional processing technology can be surpassed, enabling true three-dimensional structure production and enhancing key performance indicators of optical fiber sensors.

OPTICS AND LASER TECHNOLOGY (2022)

Add to Collection

Review Optics

Polymer optical fiber for monitoring human physiological and body function: A comprehensive review on mechanisms, materials, and applications

Rui Min et al.

Summary: Polymer optical fibers, with advantages like low Young's modulus, high flexibility, and bio-compatibility, meet the requirements for monitoring human physiological and body functions and are expected to be widely implemented in this research field in the next few years.

OPTICS AND LASER TECHNOLOGY (2022)

Add to Collection

Article Optics

Miniature bending-resistant fiber grating accelerometer based on a flexible hinge structure

Lei Liang et al.

Summary: A miniaturized fiber Bragg grating accelerometer based on flexible hinges is proposed in this paper to meet the special requirements for the size and quality of accelerometers in vibration monitoring. The accelerometer utilizes a flexible hinge as an elastic body and achieves miniaturization through a suspended arc package. The bending-resistant optical fiber grating effectively solves the issue of light loss in arc-shaped packaging. The experimental results demonstrate that the prepared accelerometer has excellent performance in terms of size, mass, and sensing characteristics, making it suitable for medium and low frequency vibration monitoring in narrow spaces.

OPTICS EXPRESS (2022)

Add to Collection

Article Engineering, Electrical & Electronic

Broadband and High Sensitivity FBG Accelerometer Based on Double Diaphragms and h-Shaped Hinges

Faxiang Zhang et al.

Summary: The novel FBG accelerometer with broadband and high sensitivity features a compact structure and interferometric demodulation method. It shows high resolution and stability, making it suitable for a variety of vibration monitoring applications.

IEEE SENSORS JOURNAL (2021)

Add to Collection

Article Engineering, Electrical & Electronic

Miniature Structure Optimization of Small-Diameter FBG-Based One-Dimensional Optical Fiber Vibration Sensor

Han Song et al.

Summary: This paper presents a miniature vibration sensor based on a small-diameter fiber Bragg grating, which is optimized for size and sensitivity using a genetic algorithm and fabricated through metal 3D printing, demonstrating superior performance compared to ordinary FBG sensors.

IEEE SENSORS JOURNAL (2021)

Add to Collection

Article Engineering, Electrical & Electronic

A fiber Bragg grating accelerometer based on Y-shaped symmetrical beam structure

Xiaodong Luo et al.

Summary: The novel fiber Bragg grating (FBG) accelerometer features a compact symmetrical structure, high linearity, wide stable working frequency range, and is suitable for vibration measurement.

OPTICAL FIBER TECHNOLOGY (2021)

Add to Collection

Article Chemistry, Analytical

A Medium-Frequency Fiber Bragg Grating Accelerometer Based on Flexible Hinges

Zichuang Li et al.

Summary: A novel medium-frequency accelerometer, based on fiber Bragg grating and flexible hinges, has been proposed in this paper. The differential structure doubles the sensitivity of the sensor while avoiding temperature effects. The proposed sensor shows good temperature self-compensation function and lateral anti-interference capability.

SENSORS (2021)

Add to Collection

Article Optics

A Fiber Bragg Grating acceleration sensor with temperature compensation

Xianfeng Zhao et al.

Summary: The FBG accelerometer based on a composite beam utilizes the opposite movement of two FBGs to reduce the impact of temperature and improve sensitivity. Experimental results demonstrate that the sensor structure is minimally affected by temperature within a certain range and has good performance at specific frequency ranges.

OPTIK (2021)

Add to Collection

Article Engineering, Electrical & Electronic

Fiber Bragg grating accelerometer based on symmetrical tilting cantilever beams and solder glass packaging for harsh environment

Shuangshuang Li et al.

Summary: The high-reliability acceleration sensor based on fiber Bragg grating (FBG) is designed to solve the low-reliability issue of existing optical fiber acceleration sensors in the field of petroleum and natural gas resources exploration. It uses inertial force to detect vibration signals and is packaged with solder glass to maintain stability in harsh environments. Through theoretical calculation and experimental verification, the sensor demonstrates excellent stability in high temperatures and has high measuring accuracy.

OPTICAL FIBER TECHNOLOGY (2021)

Add to Collection

Review Optics

Optical fiber sensing for marine environment and marine structural health monitoring: A review

Rui Min et al.

Summary: Optical fiber sensors have advantages such as resistance to electromagnetic interference, durability under extreme conditions, high transmission rate, small size, and flexibility, making them attractive for marine environment and structural health monitoring. They can be used for various sensing applications and are expected to have widespread use in marine research in the future.

OPTICS AND LASER TECHNOLOGY (2021)

Add to Collection

Article Optics

A novel strain-decoupled sensitized FBG temperature sensor and its applications to aircraft thermal management

Guang Yan et al.

Summary: This paper introduces a novel type of strain-decoupled sensitized FBG temperature sensor for accurate aircraft thermal management. By eliminating the influence of structural deformation on the sensor through packaging design, the sensor shows high temperature sensitivity and stability in experimental results, making it suitable for actual flight measurements of aircraft load spectrum.

OPTICS AND LASER TECHNOLOGY (2021)

Add to Collection

Article Chemistry, Analytical

New Fiber Bragg Grating Three-Dimensional Accelerometer Based on Composite Flexure Hinges

Hui Wang et al.

Summary: A new composite flexure hinge three-dimensional acceleration sensor was designed in this study, aiming to optimize structural parameters and coupling characteristics to achieve a small size and excellent performance for the sensor.

SENSORS (2021)

Add to Collection

Article Optics

Tube-cantilever double resonance enhanced fiber-optic photoacoustic spectrometer

Ke Chen et al.

OPTICS AND LASER TECHNOLOGY (2020)

Add to Collection

Article Engineering, Electrical & Electronic

A Novel Fiber Bragg Grating Accelerometer Based on Parallel Double Flexible Hinges

Bing Yan et al.

IEEE SENSORS JOURNAL (2020)

Add to Collection

Article Engineering, Electrical & Electronic

Signal enhancement of FBG-based cantilever accelerometer by resonance suppression using magnetic damper

Waldo Udos et al.

SENSORS AND ACTUATORS A-PHYSICAL (2020)

Add to Collection

Review Engineering, Electrical & Electronic

Recent Advances and Tendency in Fiber Bragg Grating-Based Vibration Sensor: A Review

Tianliang Li et al.

IEEE SENSORS JOURNAL (2020)

Add to Collection

Article Engineering, Electrical & Electronic

Design and Modeling of a High Sensitivity Fiber Bragg Grating-Based Accelerometer

Qinpeng Liu et al.

IEEE SENSORS JOURNAL (2019)

Add to Collection

Article Engineering, Electrical & Electronic

DBR Fiber Laser Based High-Resolution Accelerometer Network

Tao Liu et al.

JOURNAL OF LIGHTWAVE TECHNOLOGY (2019)

Add to Collection

Article Engineering, Electrical & Electronic

Double-L Cantilever-Based Fiber Bragg Grating Accelerometer

Om Prakash Parida et al.

IEEE SENSORS JOURNAL (2019)

Add to Collection

Article Instruments & Instrumentation

Railway monitoring system using optical fiber grating accelerometers

Kivilcim Yuksel et al.

SMART MATERIALS AND STRUCTURES (2018)

Add to Collection

Article Engineering, Electrical & Electronic

Design and Analysis of a Novel Dual FBG Accelerometer Based on Lantern Shape Metallic Shells

Jing Zhu et al.

IEEE SENSORS JOURNAL (2017)

Add to Collection

Article Engineering, Electrical & Electronic

Theoretical and experimental study on FBG accelerometer based on multi-flexible hinge mechanism

Lei Qiu et al.

OPTICAL FIBER TECHNOLOGY (2017)

Add to Collection

Article Chemistry, Analytical

Diaphragm Based Fiber Bragg Grating Acceleration Sensor with Temperature Compensation

Tianliang Li et al.

SENSORS (2017)

Add to Collection

Review Chemistry, Analytical

Fiber Bragg Grating Sensors for the Oil Industry

Xueguang Qiao et al.

SENSORS (2017)

Add to Collection

Article Engineering, Electrical & Electronic

Induction Motors Vibration Monitoring Using a Biaxial Optical Fiber Accelerometer

Rafael Pomorski Linessio et al.

IEEE SENSORS JOURNAL (2016)

Add to Collection

Article Chemistry, Analytical

An Intrusion Detection System for the Protection of Railway Assets Using Fiber Bragg Grating Sensors

Angelo Catalano et al.

SENSORS (2014)

Add to Collection

Proceedings Paper Physics, Applied

Fibre Bragg Grating sensor for shock wave diagnostics

A. Ravid et al.

18TH APS-SCCM AND 24TH AIRAPT, PTS 1-19 (2014)

Add to Collection

Article Engineering, Electrical & Electronic

Optical Fiber Accelerometer System for Structural Dynamic Monitoring

Paulo Fernando da Costa Antunes et al.

IEEE SENSORS JOURNAL (2009)

Add to Collection

Article Engineering, Aerospace

Industrial applications of shock waves

G. Jagadeesh

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART G-JOURNAL OF AEROSPACE ENGINEERING (2008)

Add to Collection

© Peeref 2019-2024. All rights reserved.