☆ 4.7 Article

Zooming optimization for fractional Fourier holographic parallel laser microprocessing

OPTICS AND LASER TECHNOLOGY (2023)

Related references

Note: Only part of the references are listed.

Article Chemistry, Physical

Long-term seawater anti-corrosion properties of Al alloy triggered by femtosecond laser structuring with phase change

Rahul A. Rajan et al.

Summary: By adopting a technique of femtosecond laser micro/nano-structuring, the surface of aluminium alloy material has been successfully modified into long-term stable anti-corrosive properties, with a measured corrosion rate two orders of magnitude smaller than the bare sample. This is attributed to the formation of surface micro/nano-structure with thick stable oxide layers and significant phase change from crystalline to amorphous induced by laser stress and compressive strain.

APPLIED SURFACE SCIENCE (2022)

Add to Collection

Article Materials Science, Ceramics

Three-dimensional holographic femtosecond laser parallel processing method with the fractional Fourier transform for glass substrates

Jin Wang et al.

Summary: A novel three-dimensional holographic femtosecond laser parallel processing method based on the fractional Fourier transform was proposed for arbitrary microstructures inside glass materials. It has shown high speed, high resolution, and excellent control over uniformity and positional accuracy.

CERAMICS INTERNATIONAL (2022)

Add to Collection

Article Materials Science, Ceramics

Anti-icing ceramics surface induced by femtosecond laser

Zhihao Hong et al.

Summary: This study successfully achieved the transition from superhydrophilicity to superhydrophobicity on alumina ceramics surface by inducing nested micro/nanostructures using fs laser. The superhydrophobic ceramics showed excellent anti-icing and frost resistance properties, and have a wide range of potential applications.

CERAMICS INTERNATIONAL (2022)

Add to Collection

Article Materials Science, Ceramics

High quality full ablation cutting and stealth dicing of silica glass using picosecond laser Bessel beam with burst mode

Kai Liao et al.

Summary: This paper studies the methods of full ablation cutting and stealth dicing using picosecond laser Bessel beam for glass cutting. Through experimental research and theoretical analyses, the optimal parameters for high-quality glass cutting are obtained.

CERAMICS INTERNATIONAL (2022)

Add to Collection

Review Optics

Review of femtosecond laser direct writing fiber-optic structures based on refractive index modification and their applications

Jian Zhao et al.

Summary: This paper reviews the latest development of fiber-optic structures based on refractive index modification under fs-laser irradiation, including processing mechanisms and various applications. The advantages of fs-laser direct writing technology in fabricating fiber structures with excellent properties are highlighted, along with discussions on the applications of these structures in sensors, lasers, birefringence adjustable elements, and couplers. Performance comparisons and applications of RI-modified structures are presented in conclusion.

OPTICS AND LASER TECHNOLOGY (2022)

Add to Collection

Article Chemistry, Physical

Investigation on anisotropic tribological properties of superhydrophobic/superlipophilic lead bronze surface textured by femtosecond laser

Junyuan Huang et al.

Summary: In this study, a superhydrophobic/superlipophilic surface was prepared using ultrafast femtosecond laser, and it was found that the surface properties changed after reactions occurred in the air. The friction behavior and anisotropy of superhydrophobic/superlipophilic surfaces differ in oil lubrication and dry friction, with fatigue wear being the main form of wear.

APPLIED SURFACE SCIENCE (2022)

Add to Collection

Article Engineering, Biomedical

Probing depth reduction of laser application in periodontal therapy: a network meta-analysis

Liying Jia et al.

Summary: The study systematically evaluated the reduction of probing depth (PD) in scaling and root planing of chronic periodontitis with lasers through network meta-analysis. The results showed that laser-assisted periodontal treatment has better PD reduction compared to mechanical treatment, with specific lasers showing significant differences in PD reduction at different follow-up times.

LASERS IN MEDICAL SCIENCE (2022)

Add to Collection

Article Materials Science, Coatings & Films

Cu patterns with high adhesion strength and fine resolution directly fabricated on ceramic boards by ultrafast laser modification assisted metallization

Liexin Wu et al.

Summary: This paper investigates the laser modification assisted metallization technology (LAM) for fabricating metallic patterns on ceramic substrates. The use of picosecond laser for selective activation and subsequent electroless plating results in improved adhesion strength, fracture mechanism, and deposition resolution of the copper coating. The results suggest that ultrafast-laser based LAM technology has the potential to enhance the performance of circuits on ceramic boards.

SURFACE & COATINGS TECHNOLOGY (2022)

Add to Collection

Article Optics

Adaptive weighted Gerchberg-Saxton algorithm for generation of phase-only hologram with artifacts suppression

Yang Wu et al.

Summary: An adaptive weighted GS algorithm is proposed in this paper to address the issue of iteration divergence in the conventional GS algorithm. By replacing the feedback and introducing an approximate quadratic phase, the proposed method improves the peak signal-noise ratio of the reconstructed image and suppresses artifacts in optical reconstruction. Validation through numerical simulations and optical experiments confirms the effectiveness of the proposed method.

OPTICS EXPRESS (2021)

Add to Collection

Article Materials Science, Coatings & Films

Experimental study on the ice suppression characteristics of TC4 microstructure surface induced by femtosecond pulsed laser

Guang-Feng Yang et al.

Summary: The femtosecond pulse laser processing technology can significantly improve the anti-icing performance of alloy surfaces, proposing the correlation mechanism between parameters and performance, and conducting a detailed experimental analysis of ice surface characteristics.

SURFACE & COATINGS TECHNOLOGY (2021)

Add to Collection

Article Optics

Enhanced wetting behavior using femtosecond laser-textured surface in laser welding-brazing of Ti/Al butt joint

Xi Chen et al.

Summary: This study utilized femtosecond laser texturing on Ti alloy surface to enhance the wetting behavior in laser welding-brazing of Ti/Al butt joint. Different laser power and structure patterns were used for Ti surface fabrication, with the strip pattern at 1.5 W showing the best hydrophilicity. The femtosecond laser-textured microcosmic morphology improved wetting behaviors and bonding quality in the joint, as confirmed by microhardness and mechanical properties testing.

OPTICS AND LASER TECHNOLOGY (2021)

Add to Collection

Article Optics

Holographic Femtosecond Laser Parallel Processing Method Based on the Fractional Fourier Transform

Jin Wang et al.

Summary: This novel holographic femtosecond laser parallel processing method utilizes the fractional Fourier transform to increase flexibility and available space for processing, with computer-generated holograms and an iterative algorithm for uniformity and efficiency. By adjusting the femtosecond laser beam using a spatial light modulator, complex microstructures can be processed in parallel, with the zero-order beam spot defocused or utilized to improve laser energy utilization for various structures.

OPTICS AND LASERS IN ENGINEERING (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Direct Optical Lithography of Colloidal Metal Oxide Nanomaterials for Diffractive Optical Elements with 2π Phase Control

Jia-Ahn Pan et al.

Summary: This work demonstrates the direct optical patterning of oxide nanoparticles, allowing for micron resolution patterning of materials like ZrO2, TiO2, HfO2, and ITO. By mixing the nanoparticles with a photosensitive compound and irradiating with 405 nm light, the researchers were able to achieve precise patterning and control of material properties for use in photonic applications. The fabricated structures showed excellent optical transparency, high refractive index, and good thermal stability, making them suitable for diffractive optical elements and other photonic devices.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Light-Driven Magnetic Encoding for Hybrid Magnetic Micromachines

Huan Wang et al.

Summary: The femtosecond laser-directed bubble microprinting (FsLDBM) technique enables printing of nanomaterials on solid-state substrates and remote manipulation of micromachines, expanding its applications. By utilizing Marangoni convection, evaporation flow, and capillary force, the technique achieves magnetic encoding, long-distance delivery, and printing processes effectively.

NANO LETTERS (2021)

Add to Collection

Article Multidisciplinary Sciences

Towards real-time photorealistic 3D holography with deep neural networks

Liang Shi et al.

Summary: The ability to present three-dimensional scenes with continuous depth sensation has a profound impact on various fields. Computer-generated holography enables high-resolution 3D projection, but existing methods have limitations. We demonstrate a deep-learning-based pipeline for real-time 3D hologram synthesis from a single RGB-depth image. Our memory-efficient CNN runs on consumer-grade GPUs and mobile devices, promising real-time performance in future AR/VR headsets.

NATURE (2021)

Add to Collection

Article Chemistry, Physical

Highly stretchable multilayer electronic circuits using biphasic gallium-indium

Shanliangzi Liu et al.

Summary: Biphasic Ga-In, a printable conductor, with high conductivity and extreme stretchability, is used to create various stretchable circuit board assemblies through a scalable transfer-printing process. These assemblies include a multilayer light-emitting diode display, an amplifier circuit, and a signal conditioning board for wearable sensing applications.

NATURE MATERIALS (2021)

Add to Collection

Article Optics

Amplitude-modulated log-polar coordinate mapping for generating top-hat line-shaped beams with steep edges and a high aspect ratio

Youngbin Na et al.

Summary: A method based on conformal mapping is presented to generate top-hat line-shaped beams, using Cartesian to log-polar coordinate transformation and amplitude modulation to transform circular symmetric input beams into straight lines. Experimental results demonstrate that this transformation can effectively convert any input beams with circular symmetry and produce a top-hat line-shaped focus with steep edges and a high aspect ratio.

OPTICS AND LASER TECHNOLOGY (2021)

Add to Collection

Review Optics

Femtosecond laser-based processing methods and their applications in optical device manufacturing: A review

Xiaoduo Wang et al.

Summary: Femtosecond laser fabrication offers unique advantages for manufacturing optical and photonic devices based on complex 3D structures, with versatile applications in various fields. This review highlights recent advancements in femtosecond laser fabrication technologies and their applications, as well as methods and applications for manufacturing cutting-edge optical devices.

OPTICS AND LASER TECHNOLOGY (2021)

Add to Collection

Article Optics

Enhancement of electrical conductivity during the femtosecond laser trimming process for OLED repair

Sanghoon Ahn et al.

Summary: Femtosecond laser ablation has been used in OLED panel repair for the past decade, primarily for modifying organic materials without thermal effects. To increase production yield, additive repair techniques using electrode printing and femtosecond laser trimming have been suggested to increase electrical conductivity of printed electrodes.

OPTICS AND LASERS IN ENGINEERING (2021)

Add to Collection

Article Materials Science, Coatings & Films

Surface smoothing of bulk metallic glasses by femtosecond laser double-pulse irradiation

Tie Li et al.

Summary: In this paper, a method using femtosecond laser double-pulse irradiation is proposed to smooth the surface of Zr-based BMG without inducing laser-induced periodic surface structures and crystallization. The optimized parameters include a first laser pulse energy of 0.06 mu J, an energy ratio of 40% between the first and second pulses, and a time delay of 20 ps. By applying this method, a significant decrease in surface roughness is achieved, demonstrating the feasibility of this approach in BMGs polishing.

SURFACE & COATINGS TECHNOLOGY (2021)

Add to Collection

Article Chemistry, Analytical

Three-Dimensional Reconstruction with a Laser Line Based on Image In-Painting and Multi-Spectral Photometric Stereo

Liang Lu et al.

Summary: This study introduces a multi-spectral photometric stereo method based on image in-painting, which reconstructs shapes using multi-spectral images. By improving the network and utilizing a Generative Adversarial Network, the method successfully separates a multi-spectral image with a laser line into a clean laser image and an uncorrupted multi-spectral image, resulting in high-precision 3D reconstruction.

SENSORS (2021)

Add to Collection

Article Polymer Science

Optical Encryption Based on Computer Generated Holograms in Photopolymer

Taihui Wu et al.

Summary: The study presents an optical encryption method based on computer-generated holograms printing of photopolymer. Experimental results show that large-size encrypted QR code and miniature keys can be printed in photopolymers, with advantages of high-density storage, high speed, large fault tolerance, and anti-peeping, suggesting good application prospects in optical encryption.

POLYMERS (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Fast Welding of Silver Nanowires for Flexible Transparent Conductive Film by Spatial Light Modulated Femtosecond Laser

Chang Liang et al.

Summary: An efficient and rapid method using spatial light modulated femtosecond laser for welding silver nanowires (AgNWs) is proposed in this study, which can significantly improve the welding efficiency and reduce the sheet resistance of AgNWs films without substrate damage. The welded AgNWs films demonstrate excellent electrical conductivity even after 10,000 bending cycles, showing promising prospects in the field of flexible transparent electrodes.

ADVANCED ENGINEERING MATERIALS (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Dynamic Bifunctional Metasurfaces for Holography and Color Display

Wenhong Yang et al.

Summary: The study introduces dynamic bifunctional metasurfaces that combine multiple metaholograms at different wavelengths with structural colors by controlling their spectral and phase responses. The ability to switch light diffraction on and off at specific wavelengths through destructive interference and resonance on external environment allows for selectively turning encoded metaholograms on and off, making holographic images dynamically switchable. This concept is a solid step towards practical applications of all-dielectric metasurfaces.

ADVANCED MATERIALS (2021)

Add to Collection

Article Chemistry, Physical

Anti-icing properties of femtosecond laser-induced nano and multiscale topographies

Anvesh Gaddam et al.

Summary: This study fabricated single-tier nano and two-tier multiscale topographies on stainless steel surfaces with one-step femtosecond laser processing, and investigated their anti-icing properties. The results showed that the superhydrophobic two-tier multiscale topography significantly delayed the droplet freezing time and surface frost formation.

APPLIED SURFACE SCIENCE (2021)

Add to Collection

Article Optics

Optical system design of fully symmetrical Fourier transform lens

Chao Gao et al.

Summary: The design requirements of a Fourier transform optical system for synthetic aperture radar (SAR) were analyzed to determine specific optical parameters. A Fourier lens with a fully symmetrical structure was designed to correct conjugate positional aberrations of object images. Through the construction of a 4f optical system in the laboratory, it was demonstrated that the optical lens could achieve Fourier transform and complete SAR point target signal imaging.

OPTICAL REVIEW (2021)

Add to Collection

Article Optics

Femtosecond laser processing with adaptive optics based on convolutional neural network

Satoshi Hasegawa et al.

Summary: This paper demonstrates an adaptive optics technique based on convolutional neural network for femtosecond laser processing, continuously predicting and compensating aberrations to reduce wavefront error in the system.

OPTICS AND LASERS IN ENGINEERING (2021)

Add to Collection

Article Materials Science, Coatings & Films

Switchable bubble wettability copper mesh for underwater gas collection ablated by spatial modulated femtosecond laser

Xiaoyan Sun et al.

Summary: This paper reports a fast, flexible, and efficient method for processing switchable bubble wettability copper surfaces using spatial light modulated femtosecond laser sputtering and ablation, which significantly increases processing efficiency. The laser-treated copper mesh surfaces exhibit reversible switching between underwater (super-)aerophilicity and superaerophobicity, allowing for control over bubble passage or blockage. The underwater superaerophobic characteristic of the prepared copper mesh was demonstrated for gas collection, with the gas intrusion pressure studied theoretically and experimentally.

SURFACE & COATINGS TECHNOLOGY (2021)

Add to Collection

Article Optics

Reversible 3D optical data storage and information encryption in photo-modulated transparent glass medium

Zhen Hu et al.

Summary: This study demonstrates that rare earth ions doped transparent glass can be used as a medium for 3D optical information storage and data encryption, with reversible color change and luminescence modulation. Information data can be repeatedly written and erased in arbitrary 3D space of transparent glass, showing excellent reproducibility and storage capacity.

LIGHT-SCIENCE & APPLICATIONS (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Tailoring submicrometer periodic surface structures via ultrashort pulsed direct laser interference patterning

F. Fraggelakis et al.

Summary: This study investigates the fundamental mechanisms for the formation of laser-induced topographies on stainless steel using DLIP and ULP, enhancing control over the structure and providing insights into the formation process.

PHYSICAL REVIEW B (2021)

Add to Collection

Article Chemistry, Physical

Tribological performance of metal-reinforced ceramic composites selectively structured with femtosecond laser-induced periodic surface structures

Clemens Kunz et al.

APPLIED SURFACE SCIENCE (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Rapid Assembly of Small Materials Building Blocks (Voxels) into Large Functional 3D Metamaterials

Vincent Hahn et al.

ADVANCED FUNCTIONAL MATERIALS (2020)

Add to Collection

Article Computer Science, Interdisciplinary Applications

Coupling laser physics to radiation-hydrodynamics

Brian M. Haines et al.

COMPUTERS & FLUIDS (2020)

Add to Collection

Article Optics

Single-shot phase detection in a speckle wavemeter for the measurement of femtometric wavelength change

A. Davila et al.

OPTICS AND LASERS IN ENGINEERING (2020)

Add to Collection

Article Optics

Three-dimensional micropatterning of graphene by femtosecond laser direct writing technology

Yu-Qing Liu et al.

OPTICS LETTERS (2020)

Add to Collection

Article Computer Science, Theory & Methods

Computer-Generated Holograms for 3D Imaging: A Survey

Erdem Sahin et al.

ACM COMPUTING SURVEYS (2020)

Add to Collection

Article Multidisciplinary Sciences

Applying Ultrashort Pulsed Direct Laser Interference Patterning for Functional Surfaces

Daniel Wyn Mueller et al.

SCIENTIFIC REPORTS (2020)

Add to Collection

Article Optics

In-system optimization of a hologram for high-stability parallel laser processing

Honghao Zhang et al.

OPTICS LETTERS (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Form-Factor Free 3D Copper Circuits by Surface-Conformal Direct Printing and Laser Writing

Yejin Jo et al.

ADVANCED FUNCTIONAL MATERIALS (2020)

Add to Collection

Article Optics

Direct femtosecond laser writing of inverted array for broadband antireflection in the far-infrared

Fan Zhang et al.

OPTICS AND LASERS IN ENGINEERING (2020)

Add to Collection

Article Optics

Self-assembled micropillars fabricated by holographic femtosecond multi-foci beams for in situ trapping of microparticles

Yanlei Hu et al.

OPTICS LETTERS (2020)

Add to Collection

Article Materials Science, Coatings & Films

Spatial light modulated femtosecond laser ablated durable superhydrophobic copper mesh for oil-water separation and self-cleaning

Zhuolin Dong et al.

SURFACE & COATINGS TECHNOLOGY (2020)

Add to Collection

Article Materials Science, Coatings & Films

Tribological behaviour of femtosecond laser micro-patterned hydrogenated DLC in dry and hyaluronic gel lubricated conditions

Annett Dorner-Reisel et al.

SURFACE & COATINGS TECHNOLOGY (2020)

Add to Collection

Article Multidisciplinary Sciences

Femtosecond laser programmed artificial musculoskeletal systems

Zhuo-Chen Ma et al.

NATURE COMMUNICATIONS (2020)

Add to Collection

Review Nanoscience & Nanotechnology

Advances in ultrafast laser structuring of materials at the nanoscale

Razvan Stoian et al.

NANOPHOTONICS (2020)

Add to Collection

Article Chemistry, Physical

Laser-Induced Chemistry Observed during 248 nm Vacuum Ultraviolet Photolysis of an O3 and CH3NH2 Mixture

Hayley A. Bunn et al.

JOURNAL OF PHYSICAL CHEMISTRY A (2020)

Add to Collection

Article Optics

Fabrication of homogenous subwavelength grating structures on metallic glass using double-pulsed femtosecond lasers

Yuhao Lei et al.

OPTICS AND LASERS IN ENGINEERING (2020)

Add to Collection

Article Nanoscience & Nanotechnology

Switchable active phase modulation and holography encryption based on hybrid metasurfaces

Hongqiang Zhou et al.

NANOPHOTONICS (2020)

Add to Collection

Article Optics

Enhancing microwave absorption of metals by femtosecond laser induced micro/nano surface structure

Haiyan Tao et al.

OPTICS AND LASERS IN ENGINEERING (2019)

Add to Collection

Article Optics

Maskless lithography based on digital micromirror device (DMD) and double sided microlens and spatial filter array

Duc-Hanh Dinh et al.

OPTICS AND LASER TECHNOLOGY (2019)

Add to Collection

Article Multidisciplinary Sciences

Highly stacked 3D organic integrated circuits with via-hole-less multilevel metal interconnects

Hocheon Yoo et al.

NATURE COMMUNICATIONS (2019)

Add to Collection

Article Chemistry, Physical

High-throughput micropatterning of plasmonic surfaces by multiplexed femtosecond laser pulses for advanced IR-sensing applications

S. Kudryashov et al.

APPLIED SURFACE SCIENCE (2019)

Add to Collection

Article Optics

Multi imaging-based beam shaping for ultrafast laser-material processing using spatial light modulators

Jiangning Li et al.

OPTICS AND LASERS IN ENGINEERING (2019)

Add to Collection

Article Materials Science, Coatings & Films

Non-contact residual stress analysis method with displacement measurements in the nanometric range by laser made material removal and SLM based beam conditioning on ceramic coatings

V. Martinez-Garcia et al.

SURFACE & COATINGS TECHNOLOGY (2019)

Add to Collection

Article Chemistry, Multidisciplinary

Dual-3D Femtosecond Laser Nanofabrication Enables Dynamic Actuation

Yong-Lai Zhang et al.

ACS NANO (2019)

Add to Collection

Article Chemistry, Multidisciplinary

3D Scaffolds to Study Basic Cell Biology

Marc Hippler et al.

ADVANCED MATERIALS (2019)

Add to Collection

Article Nanoscience & Nanotechnology

Fast fabrication of silver helical metamaterial with single-exposure femtosecond laser photoreduction

Lipu Liu et al.

NANOPHOTONICS (2019)

Add to Collection

Article Optics

Femtosecond laser inscription of Bragg gratings on a thin GaN film grown on a sapphire substrate

Aviran Halstuch et al.

OPTICS AND LASERS IN ENGINEERING (2018)

Add to Collection

Article Optics

Fast two-step layer-based method for computer generated hologram using sub-sparse 2D fast Fourier transform

Jia Jia et al.

OPTICS EXPRESS (2018)

Add to Collection

Review Materials Science, Coatings & Films

Application of superhydrophobic coatings as a corrosion barrier: A review

E. Vazirinasab et al.

SURFACE & COATINGS TECHNOLOGY (2018)

Add to Collection

Article Multidisciplinary Sciences

Addressable metasurfaces for dynamic holography and optical information encryption

Jianxiong Li et al.

SCIENCE ADVANCES (2018)

Add to Collection

Article Optics

Fabrication of multi-scale periodic surface structures on Ti-6Al-4V by direct laser writing and direct laser interference patterning for modified wettability applications

D. Huerta-Murillo et al.

OPTICS AND LASERS IN ENGINEERING (2017)

Add to Collection

Article Optics

Multi-beam pulsed-laser patterning of plasmonic films using broadband diffractive optical elements

A. A. Kuchmizhak et al.

OPTICS LETTERS (2017)

Add to Collection

Article Optics

Full-color holographic 3D display using slice-based fractional Fourier transform combined with free-space Fresnel diffraction

Zhen Zhang et al.

APPLIED OPTICS (2017)

Add to Collection

Article Chemistry, Physical

Fabricating a regular hexagonal lattice structure by interference pattern of six femtosecond laser beams

Yoshiki Nakata et al.

APPLIED SURFACE SCIENCE (2017)

Add to Collection

Article Chemistry, Physical

Fabrication of two-dimensional periodic structures on silicon after scanning irradiation with femtosecond laser multi-beams

An Pan et al.

APPLIED SURFACE SCIENCE (2016)

Add to Collection

Article Multidisciplinary Sciences

Optimized holographic femtosecond laser patterning method towards rapid integration of high-quality functional devices in microchannels

Chenchu Zhang et al.

SCIENTIFIC REPORTS (2016)

Add to Collection

Review Optics

Ultrafast laser processing of materials: from science to industry

Mangirdas Malinauskas et al.

LIGHT-SCIENCE & APPLICATIONS (2016)

Add to Collection

Article Optics

Femtosecond laser processing with a holographic line-shaped beam

Satoshi Hasegawa et al.

OPTICS EXPRESS (2015)

Add to Collection

Article Optics

Addressable microlens array for parallel laser microfabrication

Patrick S. Salter et al.

OPTICS LETTERS (2011)

Add to Collection

Article Optics

Fundamental structure of Fresnel diffraction: natural sampling grid and the fractional Fourier transform

Haldun M. Ozaktas et al.

OPTICS LETTERS (2011)

Add to Collection

Article Chemistry, Multidisciplinary

Direct imprinting of microcircuits on graphene oxides film by femtosecond laser reduction

Yonglai Zhang et al.

NANO TODAY (2010)

Add to Collection

Article Optics

Holographic femtosecond laser processing using optimal-rotation-angle method with compensation of spatial frequency response of liquid crystal spatial light modulator

Hidetomo Takahashi et al.

APPLIED OPTICS (2007)

Add to Collection

Article Physics, Applied

Variable holographic femtosecond laser processing by use of a spatial light modulator

Y Hayasaki et al.

APPLIED PHYSICS LETTERS (2005)

Add to Collection

© Peeref 2019-2024. All rights reserved.