☆ 4.6 Article

Environmental lead-free Cs3Bi2I9 films deposited by vapor transport deposition for stable all-inorganic solar cells

OPTICAL MATERIALS (2023)

Related references

Note: Only part of the references are listed.

Article Chemistry, Physical

In situ crystallization of 0D perovskite derivative Cs3Bi2I9 thin films via ultrasonic spray

Sebin Devasia et al.

Summary: Cs3Bi2I9 has been proposed as an alternative material for optoelectronic applications to address stability and toxicity issues associated with organic lead halide perovskites. In this study, Cs3Bi2I9 thin films were prepared by ultrasonically assisted spray deposition, and their structure, morphology, optical and electronic properties were investigated. The optimized Cs3Bi2I9 film showed potential for applications in photodetectors and solar cells.

JOURNAL OF ALLOYS AND COMPOUNDS (2022)

Add to Collection

Article Multidisciplinary Sciences

Conformal quantum dot-SnO2 layers as electron transporters for efficient perovskite solar cells

Minjin Kim et al.

Summary: The study replaced the commonly used mesoporous titanium dioxide electron transport layer with a thin layer of polyacrylic acid-stabilized tin(IV) oxide quantum dots, which improved the efficiency and stability of perovskite solar cells and enabled successful scaling up of PSCs production.

SCIENCE (2022)

Add to Collection

Article Chemistry, Physical

0D/2D Mixed Dimensional Lead-Free Caesium Bismuth Iodide Perovskite for Solar Cell Application

Salma Maneno Masawa et al.

Summary: Bismuth-based perovskites are a potentially promising alternative to lead-free perovskites. By adjusting the ratio of trivalent ions, a mixed 0D/2D structure with lower bandgap and better absorption capacity can be formed. Solvent vapour annealing improves film morphology and enhances power conversion efficiency.

MATERIALS (2022)

Add to Collection

Article Chemistry, Physical

Tin perovskite solar cells with >1,300 h of operational stability in N2 through a synergistic chemical engineering approach

Jesus Sanchez-Diaz et al.

Summary: A chemical engineering approach using Dipropylammonium iodide and sodium borohydride as additives is reported to effectively prevent the premature degradation of Sn-HPs. The method allows for obtaining high efficiency and enhanced stability, with 96% of the initial PCE maintained after 1300 hours in N-2.

JOULE (2022)

Add to Collection

Article Green & Sustainable Science & Technology

Bi5+doping improves the electrochemical properties of Ti/SnO2-Sb/PbO2 electrode and its electrocatalytic performance for phenol

Chunli Wan et al.

Summary: This study investigated the effect of Bi metal doping on the Ti/SnO2-Sb/PbO2 anode and found that Bi5+ doping increased the active sites on the electrode surface, resulting in higher catalytic reaction activity and oxygen evolution potential. Electrocatalytic oxidation experiments demonstrated that the Ti/SnO2-Sb/Bi5+-PbO2 electrode exhibited high removal rate and apparent kinetic coefficient for phenol. Energy consumption evaluation showed that Bi5+-doped electrodes had the highest current efficiency and lowest energy consumption.

JOURNAL OF CLEANER PRODUCTION (2022)

Add to Collection

Article Engineering, Electrical & Electronic

Growth of (100)-orientation-preferred BiI3 nanoplate films by vapor transport deposition for photovoltaic application

Wenbin Yuan et al.

Summary: In this study, a simple vapor transport deposition method was used to deposit high-quality BiI3 thin films, and the orientation of the films was controlled by adjusting substrate angles. The results showed that the orientation of the films was closely related to the efficiency of BiI3 solar cells, providing a new avenue for improving photovoltaic applications.

JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS (2022)

Add to Collection

Article Multidisciplinary Sciences

Surface reaction for efficient and stable inverted perovskite solar cells

Qi Jiang et al.

Summary: In this study, a reactive surface engineering approach was used to enhance the performance of perovskite solar cells with an inverted structure. The resulting p-i-n solar cells showed a high power conversion efficiency of over 25% and remained stable after long-term operation under extreme conditions.

NATURE (2022)

Add to Collection

Article Multidisciplinary Sciences

Efficient perovskite solar cells via improved carrier management

Jason J. Yoo et al.

Summary: Metal halide perovskite solar cells have shown great potential to disrupt the silicon solar cell market with their improved performance, yet still face limitations in light-harvesting due to charge carrier recombination. Efforts to enhance charge carrier management offer a path to increase device performance and approach the theoretical efficiency limit of PSCs.

NATURE (2021)

Add to Collection

Article Optics

Numerical simulation studies of Cs3Bi2I9 perovskite solar device with optimal selection of electron and hole transport layers

Md Tohidul Islam et al.

Summary: In this study, the investigation on Cs3Bi2I9 perovskite device showed that utilizing TiO2 as ETL and NiO as HTL achieved the optimal performance. Parameters such as layer band alignment, electron affinity significantly impact device performance. Modulating radiative recombination rate has minor impact on PCE, while absorber layer thickness variation has significant effect on Voc. Cs3Bi2I9 is more sensitive to defect density than ETL and HTL.

OPTIK (2021)

Add to Collection

Review Chemistry, Physical

Lead-free tin perovskite solar cells

Tianhao Wu et al.

Summary: Efficient and stable development of lead-free perovskite solar cells (PSCs) using tin as a promising candidate for high-performance, eco-friendly photovoltaic technology has been reviewed. Approaches toward efficiency improvement and challenges in reaching higher PCE and scalable production for tin PSCs have been discussed in this paper with the goal of accelerating their commercialization.

JOULE (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Heterogeneous 2D/3D Tin-Halides Perovskite Solar Cells with Certified Conversion Efficiency Breaking 14%

Bin-Bin Yu et al.

Summary: By modulating the microstructure of 2D/3D heterogeneous tin-perovskite absorber films through substituting FAI with FPEABr, the oxidation of Sn2+ to Sn4+ and defect density were effectively suppressed, leading to a remarkable increase in conversion efficiency from 9.38% to 14.81%.

ADVANCED MATERIALS (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Photorechargeable Lead-Free Perovskite Lithium-Ion Batteries Using Hexagonal Cs3Bi2I9 Nanosheets

Neha Tewari et al.

Summary: The study introduces a lead-free all-inorganic bismuth-based perovskite halide as a photoelectrode for energy harvesting in lithium-ion batteries without the need for external load. The performance of the battery using different current collectors demonstrates the electrode's various functions, and further exploration in anode structure and design shows potential for more efficient photobatteries.

NANO LETTERS (2021)

Add to Collection

Article Chemistry, Physical

Fabrication of efficient CsPbBr3 perovskite solar cells by single-source thermal evaporation

Juan Li et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2020)

Add to Collection

Review Chemistry, Physical

From Pb to Bi: A Promising Family of Pb-Free Optoelectronic Materials and Devices

Cuncun Wu et al.

ADVANCED ENERGY MATERIALS (2020)

Add to Collection

Article Nanoscience & Nanotechnology

High Efficiency and Stability of Inverted Perovskite Solar Cells Using Phenethyl Ammonium Iodide-Modified Interface of NiOx and Perovskite Layers

Yuning Liu et al.

ACS APPLIED MATERIALS & INTERFACES (2020)

Add to Collection

Article Chemistry, Physical

2D layer-embedded transparent photovoltaics

Malkeshkumar Patel et al.

NANO ENERGY (2020)

Add to Collection

Article Chemistry, Physical

Bulk heterojunction gifts bismuth-based lead-free perovskite solar cells with record efficiency

Wanpei Hu et al.

NANO ENERGY (2020)

Add to Collection

Article Multidisciplinary Sciences

Nucleation-controlled growth of superior lead-free perovskite Cs3Bi2I9 single-crystals for high-performance X-ray detection

Yunxia Zhang et al.

NATURE COMMUNICATIONS (2020)

Add to Collection

Article Nanoscience & Nanotechnology

Constructing Caesium-Based Lead-Free Perovskite Photodetector Enabling Self-Powered Operation with Extended Spectral Response

Amreen A. Hussain

ACS APPLIED MATERIALS & INTERFACES (2020)

Add to Collection

Article Chemistry, Physical

Manipulating the Electrical Properties of Sb2(S,Se)3Film for High-Efficiency Solar Cell

Xiaomin Wang et al.

ADVANCED ENERGY MATERIALS (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Environmentally stable lead-free cesium bismuth iodide (Cs3Bi2I9) perovskite: Synthesis to solar cell application

Ravindra Waykar et al.

JOURNAL OF PHYSICS AND CHEMISTRY OF SOLIDS (2020)

Add to Collection

Article Chemistry, Physical

Fluorinated interfacial layers in perovskite solar cells: efficient enhancement of the fill factor

Ru Wang et al.

JOURNAL OF MATERIALS CHEMISTRY A (2020)

Add to Collection

Article Chemistry, Physical

Solution-Processed Bismuth Halide Perovskite Thin Films: Influence of Deposition Conditions and A-Site Alloying on Morphology and Optical Properties

Umar H. Hamdeh et al.

JOURNAL OF PHYSICAL CHEMISTRY LETTERS (2019)

Add to Collection

Article Chemistry, Inorganic & Nuclear

Cesium Bismuth Iodide Solar Cells from Systematic Molar Ratio Variation of CsI and BiI3

Malin B. Johansson et al.

INORGANIC CHEMISTRY (2019)

Add to Collection

Article Chemistry, Physical

Alloy-induced phase transition and enhanced photovoltaic performance: the case of Cs3Bi2I9-xBrx perovskite solar cells

Bin-Bin Yu et al.

JOURNAL OF MATERIALS CHEMISTRY A (2019)

Add to Collection

Article Chemistry, Physical

3D low toxicity Cu-Pb binary perovskite films and their photoluminescent/photovoltaic performance

Xin Ge et al.

JOURNAL OF MATERIALS CHEMISTRY A (2019)

Add to Collection

Article Materials Science, Multidisciplinary

Tailoring the film morphology and interface band offset of caesium bismuth iodide-based Pb-free perovskite solar cells

Dhruba B. Khadka et al.

JOURNAL OF MATERIALS CHEMISTRY C (2019)

Add to Collection

Article Nanoscience & Nanotechnology

Limitations of Cs3Bi2I9 as Lead-Free Photovoltaic Absorber Materials

Biplab Ghosh et al.

ACS APPLIED MATERIALS & INTERFACES (2018)

Add to Collection

Article Chemistry, Physical

A Versatile Thin-Film Deposition Method for Multidimensional Semiconducting Bismuth Halides

Maryam Khazaee et al.

CHEMISTRY OF MATERIALS (2018)

Add to Collection

Article Chemistry, Multidisciplinary

Lead free halide perovskite Cs3Bi2I9 bulk crystals grown by a low temperature solution method

Hongjian Zhang et al.

CRYSTENGCOMM (2018)

Add to Collection

Article Chemistry, Multidisciplinary

Efficient Planar Perovskite Solar Cells with Improved Fill Factor via Interface Engineering with Graphene

Xiaojuan Zhao et al.

NANO LETTERS (2018)

Add to Collection

Article Multidisciplinary Sciences

Maximizing and stabilizing luminescence from halide perovskites with potassium passivation

Mojtaba Abdi-Jalebi et al.

NATURE (2018)

Add to Collection

Article Energy & Fuels

Lead-free, air-stable ultrathin Cs3Bi2I9 perovskite nanosheets for solar cells

Fan Bai et al.

SOLAR ENERGY MATERIALS AND SOLAR CELLS (2018)

Add to Collection

Article Chemistry, Physical

Kinetically Controlled Growth of Phase-Pure SnS Absorbers for Thin Film Solar Cells: Achieving Efficiency Near 3% with Long-Term Stability Using an SnS/CdS Heterojunction

Dongha Lim et al.

ADVANCED ENERGY MATERIALS (2018)

Add to Collection

Article Chemistry, Physical

Enhanced efficiency in lead-free bismuth iodide with post treatment based on a hole-conductor-free perovskite solar cell

Jongmoon Shin et al.

NANO RESEARCH (2018)

Add to Collection

Article Chemistry, Physical

Band Gap Engineering of Cs3Bi2I9 Perovskites with Trivalent Atoms Using a Dual Metal Cation

Ki-Ha Hong et al.

JOURNAL OF PHYSICAL CHEMISTRY C (2017)

Add to Collection

Article Multidisciplinary Sciences

Iodide management in formamidinium-lead-halide-based perovskite layers for efficient solar cells

Woon Seok Yang et al.

SCIENCE (2017)

Add to Collection

Article Chemistry, Physical

Extended Photo-Conversion Spectrum in Low-Toxic Bismuth Halide Perovskite Solar Cells

Malin B. Johansson et al.

JOURNAL OF PHYSICAL CHEMISTRY LETTERS (2016)

Add to Collection

Article Chemistry, Multidisciplinary

Theoretical insights into a potential lead-free hybrid perovskite: substituting Pb2+ with Ge2+

Ping-Ping Sun et al.

NANOSCALE (2016)

Add to Collection

Article Chemistry, Multidisciplinary

Bismuth Based Hybrid Perovskites A3Bi2I9 (A: Methylammonium or Cesium) for Solar Cell Application

Byung-Wook Park et al.

ADVANCED MATERIALS (2015)

Add to Collection

Article Chemistry, Physical

Investigation of Bismuth Triiodide (Bil3) for Photovoltaic Applications

Riley E. Brandt et al.

JOURNAL OF PHYSICAL CHEMISTRY LETTERS (2015)

Add to Collection

Article Chemistry, Physical

Lead-free germanium iodide perovskite materials for photovoltaic applications

Thirumal Krishnamoorthy et al.

JOURNAL OF MATERIALS CHEMISTRY A (2015)

Add to Collection

Article Chemistry, Multidisciplinary

Sub-150 °C processed meso-superstructured perovskite solar cells with enhanced efficiency

Konrad Wojciechowski et al.

ENERGY & ENVIRONMENTAL SCIENCE (2014)

Add to Collection

Article Multidisciplinary Sciences

Lead Iodide Perovskite Sensitized All-Solid-State Submicron Thin Film Mesoscopic Solar Cell with Efficiency Exceeding 9%

Hui-Seon Kim et al.

SCIENTIFIC REPORTS (2012)

Add to Collection

Article Chemistry, Multidisciplinary

Organometal Halide Perovskites as Visible-Light Sensitizers for Photovoltaic Cells

Akihiro Kojima et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2009)

Add to Collection

© Peeref 2019-2024. All rights reserved.