☆ 4.6 Article

Highly improved photo-sensing ability of In2S3 thin films through cerium doping

OPTICAL MATERIALS (2023)

Related references

Note: Only part of the references are listed.

Article Chemistry, Physical

?????????????????????One-pot solvothermal synthesis of flower-like Fe-doped In2S3/Fe3S4 S- scheme hetero-microspheres with enhanced interfacial electric field and boosted visible-light-driven CO2 reduction

Tongfei Xu et al.

Summary: In this work, Fe-doped flower-like In2S3/Fe3S4 hetero-microspheres (Fe-In2S3/Fe3S4 HMSs) were prepared through a facile one-pot solvothermal reaction and demonstrated as efficient S-scheme photocatalysts for visible-light-driven CO2 photoreduction. The doping of Fe reduced the bandgap of In2S3, extended the optical response to the visible-light region, increased the densities of donors and sulfur vacancies, and elevated the Fermi level. The enhanced interfacial electric field resulted in promoted carrier transfer in the S-scheme pathway. Fe-doped In2S3 also reduced the formation energy of the *CO intermediate, which favored the CO evolution at the surface.

JOURNAL OF COLLOID AND INTERFACE SCIENCE (2023)

Add to Collection

Article Materials Science, Multidisciplinary

Fabrication of Er, Tb doped CuO thin films using nebulizer spray pyrolysis technique for photosensing applications

T. Gnanasekar et al.

Summary: CuO-based high-performance photo-sensors were studied with undoped, CuO:Er (1%), CuO:Tb (1%), and Er(1%), Tb(1%) dual doped CuO thin films for photodetector applications. The doped films showed improved crystalline structure, light absorption level, and luminescence properties compared to undoped films. Additionally, CuO photodetectors doped with Er and Tb exhibited high responsivity, external quantum efficiency, and detectivity.

OPTICAL MATERIALS (2022)

Add to Collection

Article Materials Science, Multidisciplinary

Effect of F doping on the properties of zinc tin oxide thin films for UV photodetector applications prepared by low-cost nebulizer spray pyrolysis method

M. Thirumoorthi et al.

Summary: Fluorine doped zinc tin oxide (FZTO) thin films were successfully fabricated using nebulizer spray pyrolysis method in this study, and the effects of fluorine doping on their properties were investigated. The results showed that the prepared films exhibited good crystallinity, surface morphology, and optical properties, with strong response to UV light.

OPTICAL MATERIALS (2022)

Add to Collection

Article Engineering, Electrical & Electronic

Highly sensitive ultraviolet photodetectors fabricated from rare earth metal ions doped NiO thin films via nebulizer spray pyrolysis method

I. Loyola Poul Raj et al.

Summary: An automated nebulizer spray pyrolysis (NSP) route was used to prepare pure NiO and (1%-Er, Tb, Pr) RE doped NiO thin films on glass slides. The microstructure, surface morphology, composition, optical properties, and UV photoconduction of the samples were systematically studied. The Pr-doped NiO sample showed better performance in terms of photocurrent, responsivity, detectivity, and EQE, making it suitable for photodetector applications.

SENSORS AND ACTUATORS A-PHYSICAL (2022)

Add to Collection

Article Chemistry, Physical

Ozone sensing study of sprayed β-In2S3 thin films

R. Souissi et al.

Summary: The importance of detecting ozone and its impact on human health; Gas sensors based on In2S3 films prepared have high sensitivity and low detection limits; The gas sensor at a working temperature of 160 degrees Celsius exhibits good rapidity and selectivity.

JOURNAL OF ALLOYS AND COMPOUNDS (2022)

Add to Collection

Article Materials Science, Multidisciplinary

Highly photo-responsive In2S3 thin film by sulfurizing indium layer

Sumit Kumar et al.

Summary: Indium Sulphide (In2S3) films with different thicknesses were deposited by sulfurizing thermally evaporated Indium layers. The structural, optical and optoelectronic properties of the films were systematically studied. The bandgap decreased with increasing thickness, leading to increased photosensitive response and photo-detectivity. Thicker samples showed a quicker light-detecting response. XPS analysis revealed the presence of oxygen in the film, which may be responsible for the red emission in the PL spectra. AFM observation showed an increase in surface roughness with increasing thickness. The quick photo-detective response of the device was influenced by inter-band levels generated by intrinsic and surface defects.

MATERIALS CHEMISTRY AND PHYSICS (2022)

Add to Collection

Article Materials Science, Multidisciplinary

Induction cycle influence on physicochemical and optoelectronic properties of nanostructured In2S3 thin films for photocatalytic activity

B. N. Kakade et al.

Summary: The article discusses the influence of induction cycle on the physicochemical and optoelectronic properties of nanostructured In2S3 thin films. The results show that increasing the induction cycle affects the structure, optical, and electrical properties of the thin films. Additionally, the photocatalytic activity of the films is also influenced by the induction cycle.

EMERGENT MATERIALS (2022)

Add to Collection

Article Multidisciplinary Sciences

Photoconversion efficiency of In2S3/ZnO core-shell heterostructures nanorod arrays deposited via controlled SILAR cycles

Mohammed Rashid Almamari et al.

Summary: This paper reports on the structures, morphologies, optical properties, and photoconversion efficiency of In2S3/ZnO core-shell heterostructures nanorod arrays produced using SILAR cycles. The results show that the IZCSHNRAs have higher photocurrent density and photoconversion efficiency compared to pure ZnO nanorod arrays, and the properties of the specimens improve with the increase of SILAR cycles. The deposition of In2S3 nanoparticles on the ZNRAs surface improves the heterostructures, light absorption, and separation of electron-hole pairs, thus enhancing the photoconversion performance.

HELIYON (2022)

Add to Collection

Article Chemistry, Physical

Chemical bath deposition of petal-shaped In2S3 microspheres and their photoelectrochemical properties

Meng Cao et al.

Summary: In(2)S(3) thin films were prepared by chemical bath deposition, and the photoelectric properties were optimized by controlling the amount of acetic acid. The structural characteristics and morphologies of the films were characterized using XRD, SEM, and TEM. The bandgaps were measured using UV-Vis-NIR spectra. PEC measurements showed that the addition of 0.4 M CH(3)CO2H resulted in the best PEC performance for In(2)S(3), with the highest photocurrent density of 41.93 mu A/cm2.

CHEMICAL PHYSICS LETTERS (2022)

Add to Collection

Article Engineering, Electrical & Electronic

Noticeably enhanced photosensing properties of Fe-doped Bi2S3 thin films developed by nebulizer spray pyrolysis technique for photosensor applications

S. Rajeswari et al.

Summary: The current study explores the impact of Fe doping on the crystalline, morphological, electrical conductivity, and photo detector properties of Bi2S3 thin films produced through nebulized spray pyrolysis. Fe-doped films exhibit an orthorhombic structure and a maximum crystallite size of 38 nm. The 2% Fe-doped Bi2S3 film shows the highest responsivity, external quantum efficiency, and detectivity, indicating its potential for photo detector applications.

SENSORS AND ACTUATORS A-PHYSICAL (2022)

Add to Collection

Article Physics, Condensed Matter

Experimental and theoretical investigations of electronic structure and optical in Ln3+-doped In2S3 nanoparticles

Zhifang Li et al.

Summary: Indium sulfide (In2S3) quantum dots have shown great potential as chalcogenide semiconductor nanoparticles with high transparency in the visible region and excellent photoelectric performance. The introduction of lanthanide ions has been studied for its effect on the band gap value of In2S3. The study provides important guidance for the theoretical design and experimental synthesis of unique Ln(3+)-doped semiconductor nanomaterials.

SOLID STATE COMMUNICATIONS (2022)

Add to Collection

Article Chemistry, Inorganic & Nuclear

Effect of chlorine doping on some physical properties of annealed In2S3 thin layers deposited by spray technique

M. Toumi et al.

SOLID STATE SCIENCES (2022)

Add to Collection

Article Materials Science, Multidisciplinary

Effect of polycrystalline structure on the behavior of evaporated β-In2S3 thin films

C. Guillen

Summary: The crystalline structure and properties of beta-In2S3 thin films can be modified by adjusting the sulfur source pressure and heating temperature. The crystal size and bandgap energy increase with heating temperature, while the free carrier concentration and electrical conductivity decrease.

VACUUM (2022)

Add to Collection

Article Engineering, Electrical & Electronic

S/In molar ratio effect on the photoconductivity of the sprayed β-In2S3 thin films

Y. Bchiri et al.

Summary: In this study, In2S3 thin films were successfully deposited on glass substrates using a spray pyrolysis method, and their photoconductive properties were investigated by adjusting the S/In ratio. The best photosensitivity was achieved when the S/In ratio was 2. The relationship between photocurrent and light intensity follows a power law, while the relationship with bias voltage is linear.

JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Structural and optical studies of cerium doped gadolinium oxide phosphor

J. S. Revathy et al.

Summary: The research studied the influence of doping concentration variation on the properties of Ce3+ doped Gd2O3 phosphor, finding that higher doping concentration leads to lattice expansion and reduced crystal size, resulting in a blue-green emission.

BULLETIN OF MATERIALS SCIENCE (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Fabrication of ZnO-In2S3 composite nanofiber as highly efficient hydrogen evolution photocatalyst

Yu-Cheng Chang et al.

Summary: The zinc oxide-indium sulfide composite nanofiber is fabricated through electrospinning process, serving as a promising candidate for highly efficient hydrogen evolution photocatalyst by enhancing photocatalytic hydrogen production activity and increasing electron-hole pairs separation.

MATERIALS LETTERS (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Fabrication of nanostructured In2S3 thin film with broad optical absorption for improved sunlight mediated photocatalysis application

Jaspal Singh et al.

Summary: Recently, advanced coatings based on 2D-In2S3 nanosheets have been successfully fabricated using the hydrothermal method, showing uniformity and high adhesion properties on FTO substrates. The thin film with 2D nanostructure exhibits beta-In2S3 phase and is capable of absorbing the entire electromagnetic spectrum, leading to efficient degradation of organic pollutants under natural sunlight. This study provides insight into advanced thin-film-based photocatalysis initiated by solar light.

OPTICAL MATERIALS (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Improved photocurrent properties of La doped CuO thin films coated by nebulizer spray pyrolysis method for photosensor applications

T. Gnanasekar et al.

Summary: This study produced La-doped CuO thin films of various concentrations using the NSP technique, finding that the addition of La improved the absorption level in the UV region and altered the optical bandgap. The fabricated La-doped CuO thin films exhibited better photo-responsivity and detectivity.

OPTICAL MATERIALS (2021)

Add to Collection

Article Engineering, Chemical

Construction of a ternary Z-scheme In2S3@Au@P3HT photocatalyst for the degradation of phenolic pollutants under visible light

Rui Ji et al.

Summary: A ternary nanoflower, In2S3@Au@P3HT, doped with gold nanoparticles and covered with a nanolayer P3HT, was prepared for efficient photocatalytic degradation of the organic pollutant phenol. The synergistic benefits of the gold nanoparticles and P3HT layer contribute to the high performance of the ternary Z-type heterojunction photocatalyst, showing rapid degradation of phenol in water remediation applications. This new strategy for preparing the highly-efficient photocatalyst provides potential for further environmental remediation solutions.

SEPARATION AND PURIFICATION TECHNOLOGY (2021)

Add to Collection

Article Energy & Fuels

Electrical and optical characterization of sprayed In2S3 thin films as an electron transporting layer in high efficient perovskite solar cells

Maryam Hashemi et al.

Summary: This study investigated the electrical properties of In2S3 thin films deposited using the CSP method with different Indium salts, optimized the Rb(1)MAFA perovskite solar cell, and successfully improved the efficiency by inserting In2S3 layers. The highest recorded efficiency was 23.47%, approximately 3% higher than the reference case.

SOLAR ENERGY (2021)

Add to Collection

Article Engineering, Electrical & Electronic

Fabrication of Cost-Effective Nebulizer Sprayed In2S3 Thin Films for Photodetector Applications

M. Dharani Devi et al.

Summary: The study investigated the effect of precursor solution volume on In2S3 films, finding that higher precursor solution volumes led to improved photo-responsivity and performance in photodetector devices.

JOURNAL OF ELECTRONIC MATERIALS (2021)

Add to Collection

Article Energy & Fuels

Effect of heat treatment in sulfur on structural, optical and electrical properties of thermally evaporated In2S3 thin films

M. S. Tivanov et al.

Summary: The study investigates the crystallinity, optical properties, electrical conductivity, and photoresponse of thermally evaporated In2S3 thin films. It is found that annealing the films in sulfur vapor at different temperatures results in changes in the optical band gap and conductivity. Sulfur annealing at temperatures of 250-300 degrees C leads to an increase in conductivity and photosensitivity, making the films suitable for photovoltaic applications.

SOLAR ENERGY (2021)

Add to Collection

Article Chemistry, Physical

Highly luminescent In2S3 thin films with preferred growth direction of [103]

Yumin Sim et al.

Summary: High quality In2S3 thin films were synthesized via physical vapor deposition method, exhibiting extremely high crystalline quality and high quantum yield. These films showed strong photoluminescence at room temperature, possibly attributed to oxygen isoelectronic substitution at the sulfur site.

APPLIED SURFACE SCIENCE (2021)

Add to Collection

Article Chemistry, Inorganic & Nuclear

Characterization of Jet nebulizer spray pyrolysis coated MoS2 thin films and fabrication of p-Si/n-MoS2 junction diodes for optoelectronic application

T. Sasikala et al.

Summary: This study demonstrated the preparation of MoS2 thin films at various temperatures using the JNSP technique, showing that films deposited at 550 degrees Celsius exhibited the smallest band gap. The conductivity values increased with substrate temperature, and a p-Si/n-MoS2 diode with positive photo conducting nature was fabricated, indicating potential for optoelectronic device applications.

INORGANIC CHEMISTRY COMMUNICATIONS (2021)

Add to Collection

Article Engineering, Electrical & Electronic

Illumination and voltage effects on the forward and reverse bias current-voltage (I-V) characteristics in In/In2S3/p-Si photodiodes

Esra Yukselturk et al.

Summary: The study investigated the I-V characteristics of the fabricated In/In2S3/p-Si photodiode under different illumination intensities, observed two linear regions in the forward-bias ln(I)-V plots, and found that the ideality factor of the diode increased with increasing illumination intensity while the barrier height decreased. The photodiode's photoresponse, photoresponsivity, and specific detectivity were calculated as a function of the illumination.

JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Origin of ferromagnetism in Sm-doped In2S3 nanoparticles: Experimental and theoretical insights

Yi Liu et al.

JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS (2020)

Add to Collection

Article Environmental Sciences

A novel application of In2S3 for visible-light-driven photocatalytic inactivation of bacteria: Kinetics, stability, toxicity and mechanism

Haibo Qiu et al.

ENVIRONMENTAL RESEARCH (2020)

Add to Collection

Article Chemistry, Multidisciplinary

Tuning of the morphological and electronic properties of In2S3 nanosheets by cerium ion intercalation for optimizing photocatalytic activity

Soumya Shankar Basu et al.

CRYSTENGCOMM (2020)

Add to Collection

Article Chemistry, Multidisciplinary

An asymmetric contact-induced self-powered 2D In2S3 photodetector towards high-sensitivity and fast-response

Jianting Lu et al.

NANOSCALE (2020)

Add to Collection

Article Materials Science, Multidisciplinary

Effect of annealing on the physical properties of thermally evaporated In2S3 thin films

S. Rasool et al.

CURRENT APPLIED PHYSICS (2019)

Add to Collection

Article Materials Science, Multidisciplinary

Effect of cerium doping on the structural, optical and photocatalytic properties of SnO2 thin films prepared by spray pyrolysis method

M. Ayadi et al.

MATERIALS RESEARCH EXPRESS (2019)

Add to Collection

Article Chemistry, Physical

Effect of silver doping on structural and optical properties of In2S3 thin films fabricated by chemical pyrolysis

B. Tiss et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2019)

Add to Collection

Article Chemistry, Multidisciplinary

High-Performance Flexible Self-Powered Photodetector Based on Perovskite and Low-Temperature Processed In2S3 Nanoflake Film

Meng Wang et al.

ADVANCED MATERIALS INTERFACES (2019)

Add to Collection

Article Materials Science, Multidisciplinary

Transition metals doped In2S3 nanostructure: structural and optical features

Y. Al-Douri et al.

MATERIALS RESEARCH EXPRESS (2019)

Add to Collection

Article Materials Science, Multidisciplinary

Nd3+ Doping effect on the optical and electrical properties of SnO2 thin films prepared by nebulizer spray pyrolysis for opto-electronic application

K. Deva Arun Kumar et al.

MATERIALS RESEARCH BULLETIN (2018)

Add to Collection

Article Physics, Condensed Matter

Novel rare earth Gd and Al co-doped ZnO thin films prepared by nebulizer spray method for optoelectronic applications

V. Anand et al.

SUPERLATTICES AND MICROSTRUCTURES (2018)

Add to Collection

Article Chemistry, Multidisciplinary

Nickel doping effect on the structural and optical properties of indium sulfide thin films by SILAR

Fatma Gode et al.

OPEN CHEMISTRY (2018)

Add to Collection

Article Physics, Multidisciplinary

Nickel doping effect on properties of sprayed In2S3 films

M. Kraini et al.

INDIAN JOURNAL OF PHYSICS (2018)

Add to Collection

Article Materials Science, Multidisciplinary

Effect of solvents on sol-gel spin-coated nanostructured Al-doped ZnO thin films: a film for key optoelectronic applications

K. Deva Arun Kumar et al.

APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING (2017)

Add to Collection

Article Engineering, Electrical & Electronic

Preparation of high-sensitivity In2S3/Si heterojunction photodetector by chemical spray pyrolysis

Raid A. Ismail et al.

OPTICAL AND QUANTUM ELECTRONICS (2016)

Add to Collection

Article Chemistry, Multidisciplinary

Zr-Doped β-In2S3 Ultrathin Nanoflakes as Photoanodes: Enhanced Visible-Light-Driven Photoelectrochemical Water Splitting

Ligang Wang et al.

ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2016)

Add to Collection

Article Chemistry, Multidisciplinary

Structure reinvestigation of α-, β- and γ-In2S3

Paul Pistor et al.

ACTA CRYSTALLOGRAPHICA SECTION B-STRUCTURAL SCIENCE CRYSTAL ENGINEERING AND MATERIALS (2016)

Add to Collection

Article Chemistry, Physical

Template Synthesis of CuInS2 Nanocrystals from In2S3 Nanoplates and Their Application as Counter Electrodes in Dye-Sensitized Solar Cells

Bingkun Chen et al.

CHEMISTRY OF MATERIALS (2015)

Add to Collection

Article Chemistry, Physical

Enhanced Luminescence with Fast Nanosecond Lifetime in In2S3:Tb3+ Nanophosphors

Zhifang Li et al.

JOURNAL OF PHYSICAL CHEMISTRY C (2015)

Add to Collection

Article Chemistry, Multidisciplinary

Single-crystalline In2S3 nanowire-based flexible visible-light photodetectors with an ultra-high photoresponse

Xuming Xie et al.

NANOSCALE (2015)

Add to Collection

Article Chemistry, Multidisciplinary

Ce doping influence on the magnetic phase transition in In2S3:Ce nanoparticles

Binbin Yao et al.

CRYSTENGCOMM (2014)

Add to Collection

Article Chemistry, Physical

Synthesis and Characterization of Cerium Doped Titanium Catalyst for the Degradation of Nitrobenzene Using Visible Light

Padmini Ellappan et al.

INTERNATIONAL JOURNAL OF PHOTOENERGY (2014)

Add to Collection

Article Chemistry, Multidisciplinary

Effect of Sputtering Power on Structural and Optical Properties of Radio Frequency-Sputtered In2S3 Thin Films

Dong Hyun Hwang et al.

JOURNAL OF NANOSCIENCE AND NANOTECHNOLOGY (2014)

Add to Collection

Article Chemistry, Inorganic & Nuclear

The pressure-induced phase transition studies of In2S3 and In2S3:Ce nanoparticles

Binbin Yao et al.

JOURNAL OF SOLID STATE CHEMISTRY (2014)

Add to Collection

Article Materials Science, Multidisciplinary

The effects of cerium doping on the size, morphology, and optical properties of α-hematite nanoparticles for ultraviolet filtration

Dean Cardillo et al.

MATERIALS RESEARCH BULLETIN (2013)

Add to Collection

Article Physics, Condensed Matter

Effect of Al incorporation on the structural, morphological, optoelectronic and transport properties of PbS thin films

K. C. Preetha et al.

PHYSICA B-CONDENSED MATTER (2012)

Add to Collection

Article Chemistry, Physical

In2S3 Atomic Layer Deposition and Its Application as a Sensitizer on TiO2 Nanotube Arrays for Solar Energy Conversion

Shaibal K. Sarkar et al.

JOURNAL OF PHYSICAL CHEMISTRY C (2010)

Add to Collection

Article Chemistry, Physical

A New Application of Nanocrystal In2S3 in Efficient Degradation of Organic Pollutants under Visible Light Irradiation

Yunhui He et al.

JOURNAL OF PHYSICAL CHEMISTRY C (2009)

Add to Collection

Article Physics, Applied

Bright white light emission from In2S3 : Eu3+ nanoparticles

Anuja Datta et al.

JOURNAL OF PHYSICS D-APPLIED PHYSICS (2009)

Add to Collection

Article Chemistry, Physical

X-ray diffraction patterns of graphite and turbostratic carbon

Z. Q. Li et al.

CARBON (2007)

Add to Collection

Article Chemistry, Physical

Full-color emission from In2S3 and ln2S3:Eu3+ nanoparticles

W Chen et al.

JOURNAL OF PHYSICAL CHEMISTRY B (2004)

Add to Collection

© Peeref 2019-2024. All rights reserved.