☆ 4.5 Article

Planar heterojunction formamidinium lead-based perovskite solar cells with MXenes/Au electrode

OPTICAL AND QUANTUM ELECTRONICS (2023)

Related references

Note: Only part of the references are listed.

Article Multidisciplinary Sciences

Conformal quantum dot-SnO2 layers as electron transporters for efficient perovskite solar cells

Minjin Kim et al.

Summary: The study replaced the commonly used mesoporous titanium dioxide electron transport layer with a thin layer of polyacrylic acid-stabilized tin(IV) oxide quantum dots, which improved the efficiency and stability of perovskite solar cells and enabled successful scaling up of PSCs production.

SCIENCE (2022)

Add to Collection

Review Chemistry, Multidisciplinary

Rear Electrode Materials for Perovskite Solar Cells

Rui Chen et al.

Summary: Perovskite solar cells (PSCs) are a promising next-generation photovoltaic technology due to their high efficiency and low cost. The stability issue needs to be resolved urgently for the commercialization of PSCs, and the choice of rear electrode material is crucial for achieving long-term stability. This review summarizes recent progress in the development of rear electrodes based on different materials and discusses their impacts on device stability, degradation mechanisms, overall efficiency, and cost-effectiveness.

ADVANCED FUNCTIONAL MATERIALS (2022)

Add to Collection

Article Multidisciplinary Sciences

Inactive (PbI2)2RbCl stabilizes perovskite films for efficient solar cells

Yang Zhao et al.

Summary: In halide perovskite solar cells, introducing RbCl doping effectively stabilizes the perovskite phase by converting excess PbI2 into an inactive compound. This strategy achieved a certified PCE of 25.6% for FAPbI(3) perovskite solar cells, with high device stability and minimal hysteresis effects.

SCIENCE (2022)

Add to Collection

Article Engineering, Electrical & Electronic

Device Engineering Approach Toward Stable, Efficient, and Eco-Friendly Perovskite Solar Cell

Saurabh Kumar Pandey et al.

Summary: Through device optimization, a lead-free perovskite solar cell based on MA(3)Sb(2)I(9) achieved an impressive power conversion efficiency of 20.36% by incorporating a tungsten disulfide interlayer. This study highlights the potential of lead-free perovskite solar cells and provides opportunities for designing novel devices for broad photovoltaic applications.

IEEE TRANSACTIONS ON ELECTRON DEVICES (2021)

Add to Collection

Article Energy & Fuels

Comprehensive device modelling and performance analysis of MASnI3 based perovskite solar cells with diverse ETM, HTM and back metal contacts

K. Deepthi Jayan et al.

Summary: Perovskite materials are essential in the photovoltaic industry due to their outstanding properties. This study simulated the performance of lead-free MASnI(3) perovskite solar cells with various materials, and found that the Glass/FTO/PCBM/MASnI(3)/CuI/Au configuration exhibited the highest efficiency of 25.05%, while two other configurations achieved 24.94% efficiency.

SOLAR ENERGY (2021)

Add to Collection

Review Nanoscience & Nanotechnology

MXenes for Solar Cells

Lujie Yin et al.

Summary: The application of two-dimensional MXene materials in photovoltaics has attracted attention for their unique properties, and this review focuses on the development and applications of Ti3C2Tx MXene in solar cells. Existing problems are discussed and suggestions for further exploration are provided to advance the research in this area.

NANO-MICRO LETTERS (2021)

Add to Collection

Review Chemistry, Multidisciplinary

MXene-Based Materials for Solar Cell Applications

Zhe Shi et al.

Summary: MXenes are a class of two-dimensional nanomaterials with exceptional tailor-made properties, currently being extensively explored for solar cell applications. Research efforts focus on studying their applications in solar technologies, as well as discussing their synthesis methods and properties for comprehensive understanding and development.

NANOMATERIALS (2021)

Add to Collection

Article Multidisciplinary Sciences

Pseudo-halide anion engineering for α-FAPbI3 perovskite solar cells

Jaeki Jeong et al.

Summary: The research introduces a new concept of using formate anion to suppress defects in metal halide perovskite films and enhance film crystallinity, leading to improved efficiency and stability of solar cells.

NATURE (2021)

Add to Collection

Article Chemistry, Physical

Tailoring the Dimensionality of Hybrid Perovskites in Mesoporous Carbon Electrodes for Type-II Band Alignment and Enhanced Performance of Printable Hole-Conductor-Free Perovskite Solar Cells

Xiayan Chen et al.

Summary: The reduction of dimensionality in the perovskite absorber within mesoporous carbon electrodes via post-treatments enhances device performance. Printable hole-conductor-free perovskite solar cells using MAPbI(3) and FAPbI(3) achieve high efficiencies and open-circuit voltages, providing a new strategy for research in printable solar cells.

ADVANCED ENERGY MATERIALS (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Performance optimization of lead free-MASnI3 based solar cell with 27% efficiency by numerical simulation

Anand Kumar Singh et al.

Summary: Perovskite solar cells based on MASnI3 demonstrate high power conversion efficiency and performance, with an optimized structure using Cu2O as the hole transport layer and TiO2 as the electron transport layer. This indicates the possibility of achieving high-performance lead-free perovskite solar cells experimentally in future research.

OPTICAL MATERIALS (2021)

Add to Collection

Review Materials Science, Multidisciplinary

Charge transporting materials for perovskite solar cells

Ting Ji et al.

Summary: Perovskite solar cells have seen significant advancements in recent years, with a focus on the evolution of charge transporting materials like metal oxides and organic materials for electron transport, and small molecules and polymers for hole transport. The future development prospects for different types of charge transporting materials are also discussed in the review.

RARE METALS (2021)

Add to Collection

Review Chemistry, Multidisciplinary

Application of MXenes in Perovskite Solar Cells: A Short Review

Syed Afaq Ali Shah et al.

Summary: The application of MXene materials in perovskite solar cells has attracted significant attention due to their outstanding properties. This article reviews the progress made in using Ti3C2Tx MXene materials in various components of PSCs and discusses the opportunities and challenges in incorporating MXene materials for improved performance and stability.

NANOMATERIALS (2021)

Add to Collection

Proceedings Paper Materials Science, Multidisciplinary

Optimization of layer thickness of ZnO based perovskite solar cells using SCAPS 1D

S. Aseena et al.

Summary: Perovskite solar cells have shown significant advancements in performance and efficiency in recent years. Optimization of the cell structure through software simulation plays a crucial role in enhancing the overall efficiency of the solar cells.

MATERIALS TODAY-PROCEEDINGS (2021)

Add to Collection

Article Engineering, Electrical & Electronic

Evidence of improved power conversion efficiency in lead-free CsGeI3 based perovskite solar cell heterostructure via scaps simulation

Abhishek Raj et al.

Summary: The simulation of fully lead-free inorganic cesium germanium tri-iodide perovskite solar cell heterostructure achieved a champion power conversion efficiency of 18.30% and demonstrated significantly improved device parameters. The results showed that the device is perfectly optimized with experimental results, indicating the maximum possible improvement in power conversion efficiency for this type of solar cell.

JOURNAL OF VACUUM SCIENCE & TECHNOLOGY B (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Porous g-C3N4 and MXene Dual-Confined FeOOH Quantum Dots for Superior Energy Storage in an Ionic Liquid

Minjie Shi et al.

ADVANCED SCIENCE (2020)

Add to Collection

Article Chemistry, Physical

Is Formamidinium Always More Stable than Methylammonium?

Haotong Wei et al.

CHEMISTRY OF MATERIALS (2020)

Add to Collection

Article Engineering, Electrical & Electronic

Perovskite PV-Powered RFID: Enabling Low-Cost Self-Powered IoT Sensors

Sai Nithin R. Kantareddy et al.

IEEE SENSORS JOURNAL (2020)

Add to Collection

Article Materials Science, Multidisciplinary

Investigating the performance of formamidinium tin-based perovskite solar cell by SCAPS device simulation

S. Abdelaziz et al.

OPTICAL MATERIALS (2020)

Add to Collection

Article Energy & Fuels

Managing grains and interfaces via ligand anchoring enables 22.3%-efficiency inverted perovskite solar cells

Xiaopeng Zheng et al.

NATURE ENERGY (2020)

Add to Collection

Article Energy & Fuels

Experimental and SCAPS simulated formamidinium perovskite solar cells: A comparison of device performance

S. Karthick et al.

SOLAR ENERGY (2020)

Add to Collection

Review Physics, Multidisciplinary

Photodetectors based on inorganic halide perovskites: Materials and devices

Ying Li et al.

CHINESE PHYSICS B (2019)

Add to Collection

Article Multidisciplinary Sciences

A chemically inert bismuth interlayer enhances long-term stability of inverted perovskite solar cells

Shaohang Wu et al.

NATURE COMMUNICATIONS (2019)

Add to Collection

Article Nanoscience & Nanotechnology

Highly Conducting MXene-Silver Nanowire Transparent Electrodes for Flexible Organic Solar Cells

Honghao Tang et al.

ACS APPLIED MATERIALS & INTERFACES (2019)

Add to Collection

Article Nanoscience & Nanotechnology

Fluorine doped tin oxide as an alternative of indium tin oxide for bottom electrode of semi-transparent organic photovoltaic devices

Amirah Way et al.

AIP ADVANCES (2019)

Add to Collection

Article Chemistry, Physical

Perovskite/Graphene Solar Cells without a Hole-Transport Layer

Ryousuke Ishikawa et al.

ACS APPLIED ENERGY MATERIALS (2019)

Add to Collection

Article Chemistry, Physical

Numerical Simulation of Planar Heterojunction Perovskite Solar Cells Based on SnO2 Electron Transport Layer

Peng Zhao et al.

ACS APPLIED ENERGY MATERIALS (2019)

Add to Collection

Article Chemistry, Physical

Highly Reproducible Sn-Based Hybrid Perovskite Solar Cells with 9% Efficiency

Shuyan Shao et al.

ADVANCED ENERGY MATERIALS (2018)

Add to Collection

Article Chemistry, Multidisciplinary

Opening Magnesium Storage Capability of Two-Dimensional MXene by Intercalation of Cationic Surfactant

Min Xu et al.

ACS NANO (2018)

Add to Collection

Article Chemistry, Multidisciplinary

Perovskite Solar Cells with Inorganic Electron- and Hole-Transport Layers Exhibiting Long-Term (≈500 h) Stability at 85 °C under Continuous 1 Sun Illumination in Ambient Air

Seongrok Seo et al.

ADVANCED MATERIALS (2018)

Add to Collection

Review Nanoscience & Nanotechnology

Perovskite-Based Solar Cells: Materials, Methods, and Future Perspectives

Di Zhou et al.

JOURNAL OF NANOMATERIALS (2018)

Add to Collection

Article Chemistry, Physical

Studying the Effect of MoO3 in Hole-Conductor-Free Perovskite Solar Cells

Eytan Avigad et al.

ACS ENERGY LETTERS (2018)

Add to Collection

Article Chemistry, Multidisciplinary

High Electrical Conductivity 2D MXene Serves as Additive of Perovskite for Efficient Solar Cells

Zhanglin Guo et al.

SMALL (2018)

Add to Collection

Article Chemistry, Multidisciplinary

Electronic and Optical Properties of Ultrasmall ABX3 (A = Cs, CH3NH3/B = Ge, Pb, Sn, Ca, Sr/X = Cl, Br, I) Perovskite Quantum Dots

Athanasios Koliogiorgos et al.

ACS OMEGA (2018)

Add to Collection

Review Green & Sustainable Science & Technology

Perovskite solar cells: An integrated hybrid lifecycle assessment and review in comparison with other photovoltaic technologies

T. Ibn-Mohammed et al.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2017)

Add to Collection

Article Energy & Fuels

23.6%-efficient monolithic perovskite/silicon tandem solar cells with improved stability

Kevin A. Bush et al.

NATURE ENERGY (2017)

Add to Collection

Article Chemistry, Physical

Toxicity of organometal halide perovskite solar cells

Aslihan Babayigit et al.

NATURE MATERIALS (2016)

Add to Collection

Review Green & Sustainable Science & Technology

Progress in emerging solution-processed thin film solar cells - Part II: Perovskite solar cells

Mehran Habibi et al.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2016)

Add to Collection

Article Chemistry, Physical

Influence of Electrode Interfaces on the Stability of Perovskite Solar Cells: Reduced Degradation Using MoOx/Al for Hole Collection

Erin M. Sanehira et al.

ACS ENERGY LETTERS (2016)

Add to Collection

Article Multidisciplinary Sciences

Assessing the toxicity of Pb- and Sn-based perovskite solar cells in model organism Danio rerio

Aslihan Babayigit et al.

SCIENTIFIC REPORTS (2016)

Add to Collection

Article Chemistry, Multidisciplinary

Formamidinium lead trihalide: a broadly tunable perovskite for efficient planar heterojunction solar cells

Giles E. Eperon et al.

ENERGY & ENVIRONMENTAL SCIENCE (2014)

Add to Collection

Article Multidisciplinary Sciences

A hole-conductor-free, fully printable mesoscopic perovskite solar cell with high stability

Anyi Mei et al.

SCIENCE (2014)

Add to Collection

© Peeref 2019-2024. All rights reserved.