Preliminary assessment of potential pile tip damage and extrusion buckling

Pile tip damage has become of particular concern for the offshore wind industry due to the extensive use of large -diameter, thin-walled piles for monopiles and jacket structures. The potential for damage has increased in recent developments due to the occurrence of embedded boulders within the seabed sediments (e.g. glacial tills) or partially weathered soft rocks (e.g. limestones, chalk). To assess the risk of pile tip damage, this paper presents a simple schematic approach to estimate: i) whether pile tip damage might occur following impact with embedded boulders; and ii) what soil strength (e.g. as reflected in the cone tip resistance qc) might initiate progressive distortion of an initial minor dent (extrusion buckling). The methodology was developed based on results of centrifuge model tests and large displacement finite element analysis, encompassing: i) undamaged thin-walled piles installed through embedded layers of different sized boulders; and ii) initially 'pre-dented' piles driven through homogeneous sand triggering progressive distortion. Numerical analysis was used to develop predictive guidelines for conditions that might cause significant pile tip damage. The guidelines were validated by com-parison with results from model tests and also through well documented field cases where extrusion buckling occurred. The paper provides guidance for choosing the critical parameters involved in the calculation processes to enable direct application in design, allowing assessment of whether more detailed investigation and analysis should be undertaken.

Automated summary

Pile tip damage is a major concern for offshore wind industry due to the use of large-diameter, thin-walled piles. The occurrence of embedded boulders and soft rocks has increased the potential for damage. This paper presents a simple approach to assess the risk of pile tip damage and provides guidelines for the design process.