Related references
Note: Only part of the references are listed.Thermal management of metal hydride hydrogen storage using phase change materials for standalone solar hydrogen systems: An energy/exergy investigation
Huy Quoc Nguyen et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2022)
Numerical study on latent heat thermal energy storage system with PCM partially filled with aluminum foam in local thermal equilibrium
Bernardo Buonomo et al.
RENEWABLE ENERGY (2022)
The performance of hydrogen desorption from a metal hydride with heat supply by a phase change material incorporated in porous media (metal foam): Heat and mass transfer assessment
Atef Chibani et al.
JOURNAL OF ENERGY STORAGE (2022)
Heat and mass transfer characteristics of charging in a metal hydride-phase change material reactor with nano oxide additives: The large scale-approach
Atef Chibani et al.
APPLIED THERMAL ENGINEERING (2022)
Natural Convection Effect on Solidification Enhancement in a Multi-Tube Latent Heat Storage System: Effect of Tubes' Arrangement
Mohammadreza Ebrahimnataj Tiji et al.
ENERGIES (2021)
Acceleration of Heat Transfer and Melting Rate of a Phase Change Material by Nanoparticles Addition at Low Concentrations
Atef Chibani et al.
INTERNATIONAL JOURNAL OF THERMOPHYSICS (2021)
Enhanced hydrogen storage of a LaNi5 based reactor by using phase change materials
Yang Ye et al.
RENEWABLE ENERGY (2021)
Investigation of Heat Transfer Enhancement in a Triple Tube Latent Heat Storage System Using Circular Fins with Inline and Staggered Arrangements
Xinguo Sun et al.
NANOMATERIALS (2021)
Solidification Enhancement in a Multi-Tube Latent Heat Storage System for Efficient and Economical Production: Effect of Number, Position and Temperature of the Tubes
Min Li et al.
NANOMATERIALS (2021)
Computational analysis of the melting process of Phase change material-metal foam-based latent thermal energy storage unit: The heat exchanger configuration
Atef Chibani et al.
JOURNAL OF ENERGY STORAGE (2021)
Hydrogen release from a metal hydride tank with phase change material jacket and coiled-tube heat exchanger
Liang Tong et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2021)
A strategy for enhancing heat transfer in phase change material-based latent thermal energy storage unit via nano-oxides addition: A study applied to a shell-and-tube heat exchanger
Atef Chibani et al.
JOURNAL OF ENVIRONMENTAL CHEMICAL ENGINEERING (2021)
Solidification Enhancement in a Triple-Tube Latent Heat Energy Storage System Using Twisted Fins
Xinguo Sun et al.
ENERGIES (2021)
Experimental investigation on thermal conductivity of nanoparticle dispersed paraffin (NDP)
P. Manoj Kumar et al.
MATERIALS TODAY-PROCEEDINGS (2021)
Analysis of melting behavior of PCMs in a cavity subject to a non-uniform magnetic field using a moving grid technique
Mohammad Ghalambaz et al.
APPLIED MATHEMATICAL MODELLING (2020)
Solidification enhancement with multiple PCMs, cascaded metal foam and nanoparticles in the shell-and-tube energy storage system
Jasim M. Mahdi et al.
APPLIED ENERGY (2020)
Conjugate solid-liquid phase change heat transfer in heatsink filled with phase change material-metal foam
Mohammad Ghalambaz et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2020)
Examining effects of special heat transfer fins designed for the melting process of PCM and Nano-PCM
Besir Kok
APPLIED THERMAL ENGINEERING (2020)
Selection of phase change materials, metal foams and geometries for improving metal hydride performance
Hafsa El Mghari et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2020)
An experimental investigation of the charging process of thermal energy storage system filled with PCM and metal wire mesh
Soroush Ebadi et al.
APPLIED THERMAL ENGINEERING (2020)
Numerical investigation of an innovative discontinuous distribution of fins for solidification rate enhancement in PCM with and without nanoparticles
I Sarani et al.
APPLIED THERMAL ENGINEERING (2020)
A continuous hydrogen absorption/desorption model for metal hydride reactor coupled with PCM as heat management and its application in the fuel cell power system
Jing Yao et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2020)
Thermal performance analysis of a metal hydride reactor encircled by a phase change material sandwich bed
Talal Alqahtani et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2020)
Cyclic behaviors of a novel design of a metal hydride reactor encircled by cascaded phase change materials
Talal Alqahtani et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2020)
A comprehensive review on latent heat and thermal conductivity of nanoparticle dispersed phase change material for low-temperature applications
Eanest B. Jebasingh et al.
ENERGY STORAGE MATERIALS (2020)
Thermal management of metal hydride hydrogen storage reservoir using phase change materials
Liang Tong et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2019)
Thermal transport augmentation in latent heat thermal energy storage system by partially filled metal foam: A novel configuration
Varun Joshi et al.
JOURNAL OF ENERGY STORAGE (2019)
Nano-enhancement of phase change material in a shell and multi-PCM-tube heat exchanger
Majid Gorzin et al.
JOURNAL OF ENERGY STORAGE (2019)
Numerical study on latent thermal energy storage systems with aluminum foam in local thermal equilibrium
Bernardo Buonomo et al.
APPLIED THERMAL ENGINEERING (2019)
Metal Hydride Beds-Phase Change Materials: Dual Mode Thermal Energy Storage for Medium-High Temperature Industrial Waste Heat Recovery
Serge Nyallang Nyamsi et al.
ENERGIES (2019)
Analysis of hydrogen storage performance of metal hydride reactor with phase change materials
Hafsa El Mghari et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2019)
Numerical study of a multiple-segment metal foam-PCM latent heat storage unit: Effect of porosity, pore density and location of heat source
Pouyan Talebizadeh Sardari et al.
ENERGY (2019)
Heat transfer evaluation of metal oxides based nano-PCMs for latent heat storage system application
Zakir Khan et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2019)
Non-uniform heat transfer suppression to enhance PCM melting by angled fins
Chenzhen Ji et al.
APPLIED THERMAL ENGINEERING (2018)
Melting of nano-PCM inside a cylindrical thermal energy storage system: Numerical study with experimental verification
Soroush Ebadi et al.
ENERGY CONVERSION AND MANAGEMENT (2018)
Experimental investigation of transient melting and heat transfer behavior of nanoparticle-enriched PCM in a rectangular enclosure
Mohammad Bashar et al.
JOURNAL OF ENERGY STORAGE (2018)
Efficient modeling of phase change material solidification with multidimensional fins
Chunjian Pan et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2017)
Evaluation and optimization of melting performance for a latent heat thermal energy storage unit partially filled with porous media
Yang Xu et al.
APPLIED ENERGY (2017)
Phase-change heat transfer of single/hybrid nanoparticles-enhanced phase-change materials over a heated horizontal cylinder confined in a square cavity
A. J. Chamkha et al.
ADVANCED POWDER TECHNOLOGY (2017)
Melting heat transfer characteristics of a composite phase change material fabricated by paraffin and metal foam
P. Zhang et al.
APPLIED ENERGY (2017)
Nano-PCMs for enhanced energy storage and passive cooling applications
Laura Colla et al.
APPLIED THERMAL ENGINEERING (2017)
Solidification of a PCM with nanoparticles in triplex-tube thermal energy storage system
Jasim M. Mahdi et al.
APPLIED THERMAL ENGINEERING (2016)
A numerical method for PCM-based pin fin heat sinks optimization
R. Pakrouh et al.
ENERGY CONVERSION AND MANAGEMENT (2015)
Effects of heat exchanger design on the performance of a solid state hydrogen storage device
Anurag Singh et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2015)
Numerical study on performance enhancement of solid-solid phase change materials by using multi-nanoparticles mixtures
Amr Owes Elsayed
JOURNAL OF ENERGY STORAGE (2015)
The effect of pore size and porosity on thermal management performance of phase change material infiltrated microcellular metal foams
Sriharsha S. Sundarram et al.
APPLIED THERMAL ENGINEERING (2014)
Experimental study of melting and solidification of PCM in a triplex tube heat exchanger with fins
Abduljalil A. Al-Abidi et al.
ENERGY AND BUILDINGS (2014)
Thermal energy storage behavior of composite using hybrid nanomaterials as PCM for solar heating systems
S. Harikrishnan et al.
JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY (2014)
Numerical modeling for solid-liquid phase change phenomena in porous media: Shell-and-tube type latent heat thermal energy storage
Zhenyu Liu et al.
APPLIED ENERGY (2013)
Numerical study of PCM solidification in a triplex tube heat exchanger with internal and external fins
Abduljalil A. Al-Abidi et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2013)
Experimental and numerical studies on melting phase change heat transfer in open-cell metallic foams filled with paraffin
W. Q. Li et al.
APPLIED THERMAL ENGINEERING (2012)
An optimization study on the finned tube heat exchanger used in hydride hydrogen storage system - analytical method and numerical simulation
Serge Nyallang Nyamsi et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2012)
Experimental investigations on heat transfer in phase change materials (PCMs) embedded in porous materials
D. Zhou et al.
APPLIED THERMAL ENGINEERING (2011)
Heat transfer enhancement for thermal energy storage using metal foams embedded within phase change materials (PCMs)
C. Y. Zhao et al.
SOLAR ENERGY (2010)
Experimental determination of thermal conductivity of three nanofluids and development of new correlations
Ravikanth S. Vajjha et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2009)
Numerical study for enhancing the thermal conductivity of phase change material (PCM) storage using high thermal conductivity porous matrix
O Mesalhy et al.
ENERGY CONVERSION AND MANAGEMENT (2005)
A review on phase change energy storage: materials and applications
MM Farid et al.
ENERGY CONVERSION AND MANAGEMENT (2004)
Share Paper
