☆ 4.2 Article

Numerical simulation of Sutterby hybrid nanoliquid flow between two concentric cylinders with thermal radiation

NUMERICAL HEAT TRANSFER PART B-FUNDAMENTALS (2023)

Related references

Note: Only part of the references are listed.

Article Engineering, Mechanical

Significance of porous elliptical cylinder on the MHD natural convection

T. R. Vijaybabu et al.

Summary: In this study, the effects of different alignments of porous elliptical cylinder and orientation of magnetic field intensity on buoyancy driven flow and heat transfer in an enclosure were investigated using lattice Boltzmann technique. The results showed that the parameters such as buoyancy force, permeability, magnetic field intensity, and orientation significantly influenced the flow and heat transfer behavior.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2023)

Add to Collection

Article Thermodynamics

Entropy generation of natural heat exchange into a porous medium accumulated by a hybrid nanoliquid applying LTNE model

Hosein Shaker et al.

Summary: This study investigates the entropy production and natural heat exchange in a porous medium using the thermal non-equilibrium approach. It is found that the thermal conductivity ratio between the rigid wall and the nanoliquid does not affect the entropy generation and viscous friction in the nanoliquid phase. Additionally, a higher amount of entropy is generated by the thermal gradients in the nanoliquid phase compared to the solid matrix.

INTERNATIONAL JOURNAL OF NUMERICAL METHODS FOR HEAT & FLUID FLOW (2022)

Add to Collection

Article Engineering, Multidisciplinary

Theoretical analysis on MHD nanofluid flow between two concentric cylinders using efficient computational techniques

Sina Gouran et al.

Summary: The aim of the current research is to analyze thermal radiation on nanofluid flow between two circular cylinders under the influence of a magnetic field using two effective computational methods. The numerical and analytical techniques used are the differential quadrature scheme and the optimal homotopy asymptotic approach. Results show that the methods have excellent accuracy, reliability, and simplicity, with temperature and Nusselt number varying with different physical variables.

ALEXANDRIA ENGINEERING JOURNAL (2022)

Add to Collection

Article Nanoscience & Nanotechnology

Prescribed Thermal Activity in the Radiative Bidirectional Flow of Magnetized Hybrid Nanofluid: Keller-Box Approach

Iftikhar Ahmad et al.

Summary: This study investigates the effects of thermal conditions on the unsteady 3D dynamics of water-based radiative hybrid nanofluids with cylindrical-shaped nanosized particles and the Lorentz force. The transport equations are transformed into ordinary differential equations and numerically solved. Graphical illustrations and convergence analysis are used to predict the impact of parameters on the thermal setup. The results show that temperature distribution increases with higher radiation parameters and decreases with improved temperature maintaining indices. The inclusion of cylindrical-shaped nanoparticles improves the thermophysical properties of the hybrid nanofluids.

JOURNAL OF NANOMATERIALS (2022)

Add to Collection

Article Multidisciplinary Sciences

被撤回的出版物: Solar energy optimization in solar-HVAC using Sutterby hybrid nanofluid with Smoluchowski temperature conditions: a solar thermal application (Retracted article. See vol. 13, 2023)

Wasim Jamshed et al.

Summary: This article investigates the heat transmission effects in solar heating, ventilation, and air conditioning (HVAC) systems, including copper and graphene oxide nanoparticles, thermal radiative fluxing, and mass transfer. By simplifying the partial differential equations into ordinary differential equations and using numerical techniques for solution, this study mathematically processes and presents the physical attributes through tables and figures, indicating that increasing the volume fraction of nanoparticles and activation energy enhances the temperature and mass fraction field.

SCIENTIFIC REPORTS (2022)

Add to Collection

Article Engineering, Multidisciplinary

Numerical study of MHD hybrid nanofluid flow between two coaxial cylinders

A. Alsaedi et al.

Summary: This paper presents a numerical study on the flow of a hybrid nanofluid between two coaxial cylinders. The results show that higher magnetic parameters lead to a decrease in the velocity of the hybrid nanofluid and nanofluid. Higher magnetic and Brinkman parameters increase the temperature of the hybrid nanofluid and nanofluid. The temperature decreases with an increase in the nanoparticle volume fraction for copper. The Nusselt number increases with the nanoparticle volume fraction for both copper and graphene oxide nanoparticles.

ALEXANDRIA ENGINEERING JOURNAL (2022)

Add to Collection

Article Thermodynamics

Thermal effect on bioconvection flow of Sutterby nanofluid between two rotating disks with motile microorganisms

Hassan Waqas et al.

Summary: The study investigates the flow of Sutterby nanofluid with applied magnetic field and considers non-Newtonian base fluid, non-uniform thermal conductivity, nonlinear thermal radiation, and bioconvection of motile microorganisms. The numerical and graphical analysis shows the impact of different physical parameters on the velocity field, temperature field, solutal field of species, and microorganisms' profile.

CASE STUDIES IN THERMAL ENGINEERING (2021)

Add to Collection

Article

Theoretical Analysis of Cu-H2O, Al2O3-H2O, and TiO2-H2O Nanofluid Flow Past a Rotating Disk with Velocity Slip and Convective Conditions

Abdullah Dawar et al.

Journal of Nanomaterials (2021)

Add to Collection

Article Multidisciplinary Sciences

Impact of thermal radiation and non-uniform heat flux on MHD hybrid nanofluid along a stretching cylinder

Aamir Ali et al.

Summary: The study investigates the impacts of thermal radiations and non-uniform heat flux on magnetohydrodynamic hybrid nanofluid flow along a stretching cylinder. By using numerical methods, changes in velocity and temperature fields are analyzed. Results show that adding hybrid nanofluid particles decreases fluid velocity but increases temperature, while considering magnetic field and slip effects also leads to a decrease in fluid velocity.

SCIENTIFIC REPORTS (2021)

Add to Collection

Article Mathematics, Applied

Dynamics of Sutterby fluid flow due to a spinning stretching disk with non-Fourier/Fick heat and mass flux models

F. Mabood et al.

Summary: This study models the magnetohydrodynamic Sutterby fluid flow caused by a spinning stretchable disk, incorporating Stefan blowing, heat and mass flux aspects, and modified traditional heat and mass flux models for greater accuracy. The results show that Stefan blowing leads to increased species diffusion, while external magnetism decreases velocity field and enhances heat transport.

APPLIED MATHEMATICS AND MECHANICS-ENGLISH EDITION (2021)

Add to Collection

Article Energy & Fuels

Thermal analysis on Darcy-Forchheimer swirling Casson hybrid nanofluid flow inside parallel plates in parabolic trough solar collector: An application to solar aircraft

Faisal Shahzad et al.

Summary: This work focuses on making effective contributions in the field of solar aviation using nanotechnology, specifically the Casson hybrid nanofluid, to enhance the thermal efficiency of solar aircraft wings. Through parametrical studies and numerical simulation methods, the feasibility of using hybrid nanofluids to improve the performance of solar wings has been validated.

INTERNATIONAL JOURNAL OF ENERGY RESEARCH (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Thermal expansion optimization in solar aircraft using tangent hyperbolic hybrid nanofluid: a solar thermal application

Wasim Jamshed et al.

Summary: This study focuses on the thermal efficiency of solar aircraft wings, utilizing hybrid nanofluid to enhance heat transfer efficiency. The results show that hybrid nanofluid is a more ideal heat transfer source compared to traditional nanofluid.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2021)

Add to Collection

Article Computer Science, Information Systems

Dual Branches of MHD Three-Dimensional Rotating Flow of Hybrid Nanofluid on Nonlinear Shrinking Sheet

Liaquat Ali Lund et al.

Summary: This study investigates the magnetohydrodynamic three-dimensional flow of alumina and copper nanoparticles in an electrically conducting incompressible fluid in a rotating frame. Results show that an increase in copper volumetric concentration improves the velocity of the hybrid nanofluid in the upper branch, and the heat transfer rate is enhanced compared to viscous and simple nanofluids. The study highlights the impact of various applied parameters on velocity and temperature fields through graphical representations.

CMC-COMPUTERS MATERIALS & CONTINUA (2021)

Add to Collection

Article Physics, Multidisciplinary

Dynamical and optimal procedure to analyze the exhibition of physical attributes imparted by Sutterby magneto-nanofluid in Darcy medium yielded by axially stretched cylinder

S. Bilal et al.

CANADIAN JOURNAL OF PHYSICS (2020)

Add to Collection

Article Engineering, Multidisciplinary

Flow and heat transfer of hybrid nanofluid over a permeable shrinking cylinder with Joule heating: A comparative analysis

Najiyah Safwa Khashi'ie et al.

ALEXANDRIA ENGINEERING JOURNAL (2020)

Add to Collection

Article Mathematics

Radiative MHD Sutterby Nanofluid Flow Past a Moving Sheet: Scaling Group Analysis

Mohammed M. Fayyadh et al.

MATHEMATICS (2020)

Add to Collection

Article Thermodynamics

Heat transfer enhancement in hydromagnetic alumina-copper/water hybrid nanofluid flow over a stretching cylinder

Muhammad Muddassar Maskeen et al.

JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY (2019)

Add to Collection

Article Engineering, Multidisciplinary

Momentum and heat transfer behaviour of Jeffrey, Maxwell and Oldroyd-B nanofluids past a stretching surface with non-uniform heat source/sink

N. Sandeep et al.

AIN SHAMS ENGINEERING JOURNAL (2018)

Add to Collection

Article Engineering, Multidisciplinary

Nanofluid heat transfer between two pipes considering Brownian motion using AGM

M. Sheikholeslami et al.

ALEXANDRIA ENGINEERING JOURNAL (2017)

Add to Collection

Article Engineering, Chemical

Experimental investigation of nanofluid free convection over the vertical and horizontal flat plates with uniform heat flux by PIV

R. Parizad Laein et al.

ADVANCED POWDER TECHNOLOGY (2016)

Add to Collection

Article Chemistry, Physical

Recovery of drop in heat transfer rate for a rotating system by nanofluids

Saeedreza Zeibi Shirejini et al.

JOURNAL OF MOLECULAR LIQUIDS (2016)

Add to Collection

Article Engineering, Multidisciplinary

Effect of partial slip on hydromagnetic flow over a porous stretching sheet with non-uniform heat source/sink, thermal radiation and wall mass transfer

A. K. Abdul Hakeem et al.

AIN SHAMS ENGINEERING JOURNAL (2014)

Add to Collection

© Peeref 2019-2024. All rights reserved.