☆ 4.6 Article

Three-dimensional and four-dimensional printing in otolaryngology

MRS BULLETIN (2023)

Related references

Note: Only part of the references are listed.

Article Biotechnology & Applied Microbiology

Fluidic integrated 3D bioprinting system to sustain cell viability towards larynx fabrication

Hae Sang Park et al.

Summary: In this study, we successfully created a three-dimensional bioprinted artificial larynx using rabbit's chondrocyte-laden gelatin methacryloyl (GelMA)/glycidyl-methacrylated hyaluronic acid (GMHA) hybrid bioink. We incorporated a polycaprolactone (PCL) outer framework with pores to provide structural strength and a suitable microenvironment for the printed cells. Our novel fluidics supply (FS) system improved cell viability during the printing process, leading to the generation of a large-scale cell-laden artificial laryngeal framework. Animal studies confirmed the functionality of the transplanted 3D bio-larynx, offering potential for clinical applications in laryngectomy patients.

BIOENGINEERING & TRANSLATIONAL MEDICINE (2023)

Add to Collection

Review Health Care Sciences & Services

3D Printing in Otolaryngology Surgery: Descriptive Review of Literature to Define the State of the Art

Federica Zoccali et al.

Summary: This systematic review summarizes the current benefits and possible future applications of 3D printing in the field of otolaryngology. The review includes studies on surgical planning, reconstructing missing tissues, medical training, and providing information to patients. Although the use of 3D printing in otolaryngology practice is growing, further studies are needed to evaluate its benefits.

HEALTHCARE (2023)

Add to Collection

Article Engineering, Biomedical

Human-engineered auricular reconstruction (hEAR) by 3D-printed molding with human-derived auricular and costal chondrocytes and adipose-derived mesenchymal stem cells

Shira Landau et al.

Summary: This study developed a clinical-grade, 3D-printed biodegradable auricle scaffold using novel tissue engineering techniques for microtia repair. The unique scaffold design allows for stable cartilage formation, which is expected to improve aesthetic outcomes and reduce patient discomfort.

BIOFABRICATION (2022)

Add to Collection

Article Materials Science, Multidisciplinary

Extracellular Matrix Microparticles Improve GelMA Bioink Resolution for 3D Bioprinting at Ambient Temperature

Zachary Galliger et al.

Summary: This study proposes a method to improve the viscosity of bioinks by adding decellularized extracellular matrix microparticles to gelatin-methacryloyl, creating a fluid capable of self-supporting structures. The method performs similarly to traditional methods in terms of print quality and mechanical properties, while eliminating the need for cooling systems.

MACROMOLECULAR MATERIALS AND ENGINEERING (2022)

Add to Collection

Article Engineering, Biomedical

Microtissue-Based Bioink as a Chondrocyte Microshelter for DLP Bioprinting

Xinfang Xie et al.

Summary: This study introduces a novel microtissue bioink suitable for digital light processing (DLP) bioprinting, which exhibits good printability and cellular viability maintenance. The bioink is prepared by crosslinking acellular matrix microparticles and GelMA hydrogel, allowing biomimetic cell density and microenvironment.

ADVANCED HEALTHCARE MATERIALS (2022)

Add to Collection

Article Chemistry, Multidisciplinary

3D Printing of Human Ossicle Models for the Biofabrication of Personalized Middle Ear Prostheses

Jacob Dairaghi et al.

Summary: The use of 3D printing technology enables the production of anatomically correct and personalized middle ear protheses, which opens the way for the in vitro generation of personalized middle ear prostheses for implantation.

APPLIED SCIENCES-BASEL (2022)

Add to Collection

Article Engineering, Biomedical

Bioprinting and regeneration of auricular cartilage using a bioactive bioink based on microporous photocrosslinkable acellular cartilage matrix

Litao Jia et al.

Summary: Tissue engineering offers new opportunities and strategies for auricular reconstruction, and the use of multi-nozzle bioprinting technology can develop biocompatible auricular equivalents with precise shapes and low immunogenicity.

BIOACTIVE MATERIALS (2022)

Add to Collection

Article Surgery

Current Application and Future Prospects of 3D Printing in Otorhinolaryngology-A Narrative Review

Devendra Tiwari et al.

Summary: The application of 3D printing technology in healthcare, especially in otorhinolaryngology and head and neck surgery, has shown significant progress. Despite the promising potential, further research is needed to improve 3D materials and integrate tissue engineering 3D bioprinting for better training models and functional implants.

INDIAN JOURNAL OF OTOLARYNGOLOGY AND HEAD & NECK SURGERY (2022)

Add to Collection

Review Biology

Current Strategies for Tracheal Replacement: A Review

Giuseppe Damiano et al.

Summary: The incidence of airway cancers is increasing, and tracheal resection is commonly performed with significant post-operative complications affecting quality of life. Current research focuses on regenerative medicine for tracheal replacement using bio-prosthesis, with successful tracheal transplantation requiring an effective vascular supply. This review describes the current research efforts in the field of tracheal replacement, including attempts to use decellularized tissues and the importance of ensuring proper mechanical properties and biocompatibility.

LIFE-BASEL (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Biomimetic Tendrils by Four Dimensional Printing Bimorph Springs with Torsion and Contraction Properties Based on Bio-Compatible Graphene/Silk Fibroin and Poly(3-Hydroxybutyrate-co-3-Hydroxyvalerate)

Carmelo De Maria et al.

Summary: This study fabricated 4D bimorph coiled structures inspired by plant tendril geometry, demonstrating temperature-induced self-compression and torsion. The reversible contractive actuation of these structures in water environment holds potential for applications in regenerative medicine.

ADVANCED FUNCTIONAL MATERIALS (2021)

Add to Collection

Article Biochemistry & Molecular Biology

Bioprinting of human nasoseptal chondrocytes-laden collagen hydrogel for cartilage tissue engineering

Xiaoyi Lan et al.

Summary: Skin cancer patients with tumorigenic lesions on their noses often require surgical resection resulting in nasal cartilage removal. Autologous tissue-engineered nasal cartilage grafts can help mitigate the problem, despite the issue of inhomogeneous distribution of cartilage matrix. Advances in 3D bioprinting technology offer customizable and anatomically shaped cartilages without the distribution issues.

FASEB JOURNAL (2021)

Add to Collection

Article Biophysics

Embedded 3D printing of multi-layer, self-oscillating vocal fold models

Taylor E. Greenwood et al.

Summary: This study introduces a new method - embedded 3D printing, for fabricating functional multi-layer vocal fold models. Analysis of the geometric and stiffness characteristics of the layers was conducted, and test results demonstrating the models' capability for sustained phonon mimic vibration were presented. The embedded 3D printing process shows potential for improving fabrication, design, and functionality of multi-layer vocal fold models in voice biomechanics research.

JOURNAL OF BIOMECHANICS (2021)

Add to Collection

Review Materials Science, Biomaterials

Recent advances in bioprinting technologies for engineering different cartilage-based tissues

Tarun Agarwal et al.

Summary: The inadequate self-repair and regenerative efficiency of cartilage tissues have led researchers to devise advanced strategies, including the introduction of bioprinting, for resolving this issue. This review discusses the implications of standard and advanced 3D/4D printing technologies for repairing various cartilage tissues, highlights stem cell opportunities, and explores critical issues and prospects for future developments in personalized medicine.

MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2021)

Add to Collection

Review Cell & Tissue Engineering

Three-Dimensional Bioprinting Scaffolding for Nasal Cartilage Defects: A Systematic Review

Carlos M. Chiesa-Estomba et al.

Summary: This study conducted a systematic review on the role of 3D bioprinting scaffolding for nasal cartilage defects repair, with a focus on cellular sources, types of scaffold materials, biochemical evaluation, histological analysis, in-vitro and in-vivo studies, and animal models used. The results showed high heterogeneity in mechanical evaluation, common patterns of collagen expression in scaffolds, and potential limitations in the translational investigation due to heterotopic scaffold implantation and lack of quantitative histological data. Further research is needed to address these issues in the growing field of 3D bioprinting for nasal cartilage defects repair.

TISSUE ENGINEERING AND REGENERATIVE MEDICINE (2021)

Add to Collection

Article

Open-source CAD-CAM simulator of the extrusion-based bioprinting process

Amedeo Franco Bonatti et al.

Bioprinting (2021)

Add to Collection

Review Surgery

Long-term complications of microtia reconstruction: A systematic review

E. M. Ronde et al.

Summary: The follow-up of ACC reconstruction for over five years has shown good results, while reports on the extended long-term results of PPE reconstruction are limited. Data synthesis was constrained by heterogeneity and poor study quality. Future studies should focus on reporting long-term complications and recommend a surgical follow-up of at least five years.

JOURNAL OF PLASTIC RECONSTRUCTIVE AND AESTHETIC SURGERY (2021)

Add to Collection

Review Orthopedics

Bioprinting for bone tissue engineering

Amedeo F. Bonatti et al.

Summary: Bone tissue engineering is an interdisciplinary field that aims to create three-dimensional living scaffolds, and bioprinting techniques have played a crucial role in this field. Bioprinting has almost replaced traditional techniques, allowing for precise control of scaffold architecture and the incorporation of cells and bioactive molecules.

MINERVA ORTHOPEDICS (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Fabricating hydrogels to mimic biological tissues of complex shapes and high fatigue resistance

Hang Yang et al.

Summary: The challenge of achieving high fatigue resistance and complex shapes with synthetic materials has been met with hydrogels of heterogeneous structures, which show great potential for various applications.

MATTER (2021)

Add to Collection

Article Cell Biology

3D printing for tissue engineering in otolaryngology

Roberto Di Gesu et al.

CONNECTIVE TISSUE RESEARCH (2020)

Add to Collection

Review Surgery

The History of Alloplastic Ear Reconstruction for Microtia

Steven D. Kozusko et al.

ANNALS OF PLASTIC SURGERY (2020)

Add to Collection

Review Biochemistry & Molecular Biology

Pectin-GPTMS-Based Biomaterial: toward a Sustainable Bioprinting of 3D scaffolds for Tissue Engineering Application

Anna Lapomarda et al.

BIOMACROMOLECULES (2020)

Add to Collection

Review Biochemistry & Molecular Biology

Mechanisms of larynx and vocal fold development and pathogenesis

Vlasta Lungova et al.

CELLULAR AND MOLECULAR LIFE SCIENCES (2020)

Add to Collection

Article Chemistry, Multidisciplinary

A 3D-Printed Hybrid Nasal Cartilage with Functional Electronic Olfaction

Yasamin A. Jodat et al.

ADVANCED SCIENCE (2020)

Add to Collection

Article Engineering, Biomedical

4D-bioprinted silk hydrogels for tissue engineering

Soon Hee Kim et al.

BIOMATERIALS (2020)

Add to Collection

Article Engineering, Biomedical

Modeling the Three-Dimensional Bioprinting Process of β-Sheet Self-Assembling Peptide Hydrogel Scaffolds

Irene Chiesa et al.

FRONTIERS IN MEDICAL TECHNOLOGY (2020)

Add to Collection

Review Otorhinolaryngology

Tissue engineering applications in otolaryngology-The state of translation

Weston L. Niermeyer et al.

LARYNGOSCOPE INVESTIGATIVE OTOLARYNGOLOGY (2020)

Add to Collection

Article Otorhinolaryngology

A 3-dimensional bioprinted tracheal segment implant pilot study: Rabbit tracheal resection with graft implantation

Rachel Kaye et al.

INTERNATIONAL JOURNAL OF PEDIATRIC OTORHINOLARYNGOLOGY (2019)

Add to Collection

Article Multidisciplinary Sciences

Experimental Tracheal Replacement Using 3-dimensional Bioprinted Artificial Trachea with Autologous Epithelial Cells and Chondrocytes

Jae-Hyun Park et al.

SCIENTIFIC REPORTS (2019)

Add to Collection

Review Engineering, Manufacturing

Binder jetting: A review of process, materials, and methods

Mohsen Ziaee et al.

ADDITIVE MANUFACTURING (2019)

Add to Collection

Article Dentistry, Oral Surgery & Medicine

Direct 3D Printing of Flexible Nasal Prosthesis: Optimized Digital Workflow from Scan to Fit

Amjad Nuseir et al.

JOURNAL OF PROSTHODONTICS-IMPLANT ESTHETIC AND RECONSTRUCTIVE DENTISTRY (2019)

Add to Collection

Article Anatomy & Morphology

A morphometric study of human middle ear ossicles in cadaveric temporal bones of Indian population and a comparative analysis

David Victor Kumar et al.

JOURNAL OF THE ANATOMICAL SOCIETY OF INDIA (2018)

Add to Collection

Article Cell & Tissue Engineering

Repair of Tympanic Membrane Perforations with Customized Bioprinted Ear Grafts Using Chinchilla Models

Che-Ying Kuo et al.

TISSUE ENGINEERING PART A (2018)

Add to Collection

Review Biotechnology & Applied Microbiology

Biofabrication: A Guide to Technology and Terminology

Lorenzo Moroni et al.

TRENDS IN BIOTECHNOLOGY (2018)

Add to Collection

Article Medicine, General & Internal

In Vitro Regeneration of Patient-specific Ear-shaped Cartilage and Its First Clinical Application for Auricular Reconstruction

Guangdong Zhou et al.

EBIOMEDICINE (2018)

Add to Collection

Review Biotechnology & Applied Microbiology

Spatio-Temporal Control of Cell Adhesion: Toward Programmable Platforms to Manipulate Cell Functions and Fate

Chiara Cimmino et al.

FRONTIERS IN BIOENGINEERING AND BIOTECHNOLOGY (2018)

Add to Collection

Article Cardiac & Cardiovascular Systems

Surgical anatomy of the trachea

Paul W. Furlow et al.

ANNALS OF CARDIOTHORACIC SURGERY (2018)

Add to Collection

Review Otorhinolaryngology

3D printing for clinical application in otorhinolaryngology

Nongping Zhong et al.

EUROPEAN ARCHIVES OF OTO-RHINO-LARYNGOLOGY (2017)

Add to Collection

Article Engineering, Biomedical

Reconstruction of defects of the trachea

Margot Den Hondt et al.

JOURNAL OF MATERIALS SCIENCE-MATERIALS IN MEDICINE (2017)

Add to Collection

Review Polymer Science

Dynamically tunable cell culture platforms for tissue engineering and mechanobiology

Koichiro Uto et al.

PROGRESS IN POLYMER SCIENCE (2017)

Add to Collection

Article Medicine, General & Internal

Morphological Variations of Middle Ear Ossicles and its Clinical Implications

Ritaban Saha et al.

JOURNAL OF CLINICAL AND DIAGNOSTIC RESEARCH (2017)

Add to Collection

Review Medicine, Research & Experimental

Stem cell approaches for vocal fold regeneration

Jonathan M. Fishman et al.

LARYNGOSCOPE (2016)

Add to Collection

Article Biochemical Research Methods

Predicting Achievable Fundamental Frequency Ranges in Vocalization Across Species

Ingo Titze et al.

PLOS COMPUTATIONAL BIOLOGY (2016)

Add to Collection

Article Surgery

Pre and post-operative psychological functioning in younger and older children with microtia

Alexis L. Johns et al.

JOURNAL OF PLASTIC RECONSTRUCTIVE AND AESTHETIC SURGERY (2015)

Add to Collection

Article Cell Biology

Bioengineered vocal fold mucosa for voice restoration

Changying Ling et al.

SCIENCE TRANSLATIONAL MEDICINE (2015)

Add to Collection

Review Audiology & Speech-Language Pathology

Mechanical Characterization of Vocal Fold Tissue: A Review Study

Amir K. Miri

JOURNAL OF VOICE (2014)

Add to Collection

Article Engineering, Biomedical

Long-term functional reconstruction of segmental tracheal defect by pedicled tissue-engineered trachea in rabbits

Xusong Luo et al.

BIOMATERIALS (2013)

Add to Collection

Article Chemistry, Multidisciplinary

3D Printed Bionic Ears

Manu S. Mannoor et al.

NANO LETTERS (2013)

Add to Collection

Review Genetics & Heredity

Microtia: Epidemiology and Genetics

Daniela V. Luquetti et al.

AMERICAN JOURNAL OF MEDICAL GENETICS PART A (2012)

Add to Collection

Article Otorhinolaryngology

Pediatric Tracheal Reconstruction Using Cadaveric Homograft

Evan J. Propst et al.

ARCHIVES OF OTOLARYNGOLOGY-HEAD & NECK SURGERY (2011)

Add to Collection

Article Engineering, Biomedical

Development of bioengineered human larynx

Silvia Baiguera et al.

BIOMATERIALS (2011)

Add to Collection

Article Cell & Tissue Engineering

A Healing Method of Tympanic Membrane Perforations Using Three-Dimensional Porous Chitosan Scaffolds

Jangho Kim et al.

TISSUE ENGINEERING PART A (2011)

Add to Collection

Article Surgery

Psychosocial Outcomes Among Microtia Patients of Different Ages and Genders Before Ear Reconstruction

Datao Li et al.

AESTHETIC PLASTIC SURGERY (2010)

Add to Collection

Review Cell & Tissue Engineering

Tissue Engineering Therapies for the Vocal Fold Lamina Propria

Jaishankar K. Kutty et al.

TISSUE ENGINEERING PART B-REVIEWS (2009)

Add to Collection

Article Otorhinolaryngology

Preliminary study on the quantitative analysis of vocal loading effects on vocal fold dynamics using phonovibrograms

Joerg Lohscheller et al.

ANNALS OF OTOLOGY RHINOLOGY AND LARYNGOLOGY (2008)

Add to Collection

Review Engineering, Biomedical

Tracheal replacements: part 1

Kristin A. Kucera et al.

ASAIO JOURNAL (2007)

Add to Collection

Article Medicine, Research & Experimental

Butterfly cartilage graft inlay tympanoplasty for large perforations

Marcielle A. Ghanem et al.

LARYNGOSCOPE (2006)

Add to Collection

Article Medicine, Research & Experimental

Tympano-ossiculoplasty utilizing the Spiggle and Theis titanium total ossicular replacement prosthesis

BA Neff et al.

LARYNGOSCOPE (2003)

Add to Collection

© Peeref 2019-2024. All rights reserved.