☆ 4.5 Review

Challenges and Future in Ni Laterite Ore Enrichment: A Critical Review

MINERAL PROCESSING AND EXTRACTIVE METALLURGY REVIEW (2023)

Related references

Note: Only part of the references are listed.

Article Engineering, Chemical

Low-temperature heat transfer mediums for cryogenic applications

Hussam Jouhara et al.

Summary: Researchers and industrialists are interested in cryogenic technologies due to the unique properties of materials at very low temperatures. This work discusses the recent progress and characteristics of cryogenic mediums in heat transfer applications. Liquid He and N2 are the most commonly used cryogenic mediums, with liquid He providing extremely low temperatures and liquid N2 being cost-effective and easily accessible. The single-phase application of cryogenic mediums is common, while two-phase applications are mainly seen in heat pipes. Cryogenic mediums are crucial for critical and niche applications in aerospace, superconductivity, advanced manufacturing, healthcare, and scientific research.

JOURNAL OF THE TAIWAN INSTITUTE OF CHEMICAL ENGINEERS (2023)

Add to Collection

Review Metallurgy & Metallurgical Engineering

The Direct Leaching of Nickel Sulfide Flotation Concentrates - A Historic and State-of-the-Art Review Part III: Laboratory Investigations into Atmospheric Leach Processes

Nebeal Faris et al.

Summary: This article reviews laboratory investigations into the leaching of nickeliferous sulfide concentrates at ambient pressure, and summarizes the challenges and research opportunities in the direct leaching of nickel sulfide flotation concentrates. The majority of the studies have focused on leaching in chloride media, bioleaching, and pyrometallurgical pre-treatments.

MINERAL PROCESSING AND EXTRACTIVE METALLURGY REVIEW (2023)

Add to Collection

Article Metallurgy & Metallurgical Engineering

Xanthan gum based investigations into the surface chemistry of cassiterite and beneficiation of cassiterite tailings

C. Nambaje et al.

Summary: This study investigated the surface chemistry and selective dispersion-flocculation-flotation of cassiterite tailings using xanthan gum. The results showed that xanthan gum adsorbs on cassiterite through both physical and chemical forces. The adsorption density decreases with increasing pH, and does not occur on quartz. The adsorption of xanthan gum on cassiterite is governed by hydrogen bonding and chemical interaction. Selective dispersion-flocculation-flotation tests demonstrated that a cleaner concentrate of high grade and recovery could be obtained using xanthan gum.

MINERAL PROCESSING AND EXTRACTIVE METALLURGY REVIEW (2022)

Add to Collection

Article Thermodynamics

Enhancement effects of the obstacle arrangement and gradient height distribution in serpentine flow-field on the performances of a PEMFC

Yang Wang et al.

Summary: The structure of flow-field on the cathode-side channel has a significant impact on the performance of PEMFC, and incorporating serial obstacles can improve reactant gas transfer and current density distribution. The arrangement and height distribution of obstacles influence the performance of PEMFC, with the potential to enhance stability or increase net power output.

ENERGY CONVERSION AND MANAGEMENT (2022)

Add to Collection

Article Engineering, Chemical

Reverse froth flotation separation of limonite and quartz with cationic gemini surfactant

Chang Liu et al.

Summary: A novel collector, EDDA, was synthesized and used in the reverse froth flotation of limonite and quartz. The results showed that EDDA had good floatation ability and selectivity to quartz, and it was more effective than the commonly used DDA. The high-efficiency separation of limonite and quartz could be achieved without adding depressant by using EDDA at the natural pH range.

MINERALS ENGINEERING (2022)

Add to Collection

Review Chemistry, Multidisciplinary

Molecular electrostatic potential analysis: A powerful tool to interpret and predict chemical reactivity

Cherumuttathu H. Suresh et al.

Summary: The MESP topology analysis is widely used for the interpretation and prediction of chemical reactivity, providing valuable information about bonded regions, electron-rich regions, and intermolecular interactions. The mapping of MESP topology is achieved by computing backward difference data and Hessian matrix elements at critical points.

WILEY INTERDISCIPLINARY REVIEWS-COMPUTATIONAL MOLECULAR SCIENCE (2022)

Add to Collection

Article Metallurgy & Metallurgical Engineering

Alternative Resources for Producing Nickel Matte-Laterite Ores and Polymetallic Nodules

Kun Su et al.

Summary: Polymetallic nodules and nickel laterite ores, both containing a variety of valuable metals with similar nickel concentrations, are ideal alternatives for industries seeking to meet the increasing demand for nickel resources. High-temperature carbothermic reduction and sulfurization have been investigated for efficient nickel extraction by optimizing slag and matte systems, achieving high nickel concentrations in the matte.

MINERAL PROCESSING AND EXTRACTIVE METALLURGY REVIEW (2022)

Add to Collection

Article Engineering, Chemical

Helping to reduce mining industry carbon emissions: A step-by-step guide to sizing and selection of energy efficient high pressure grinding rolls circuits

Stephen Morrell

Summary: Comminution significantly contributes to the Mining Industry's carbon footprint, and there is a need to improve comminution circuit energy efficiency in order to meet net zero carbon emission targets. High Pressure Grinding Rolls (HPGR) circuits have the potential to reduce CO2 emissions by a considerable amount compared to traditional alternatives. However, the adoption of HPGR technology has been slow, possibly due to the costly and time-consuming pilot testing required. To address this issue, a power-based methodology has been developed to assess, size, and select HPGR closed circuits in hard rock mining applications.

MINERALS ENGINEERING (2022)

Add to Collection

Article Chemistry, Physical

Recovery of Non-Ferrous Metals from PCBs Scrap by Liquation from Lead

Maciej Wedrychowicz et al.

Summary: This article presents the results of research on the recycling of non-ferrous metals from PCB scrap using the melting in metallic lead method. It shows that copper and tin have a high solubility in lead, and the concentration of copper and tin in the alloy increases with a higher amount of scrap dissolved in lead.

MATERIALS (2022)

Add to Collection

Article Chemistry, Multidisciplinary

Dual Nickel/Photoredox-Catalyzed Site-Selective Cross-Coupling of 1,2-Bis-Boronic Esters Enabled by 1,2-Boron Shifts

Hui Wang et al.

Summary: This study reports a nickel/photoredox-catalyzed site-selective mono-deboronative arylation of 1,2-bis-boronic esters, which allows for selective coupling of the more sterically hindered secondary/tertiary positions. This is achieved by utilizing a 1,2-boron shift of primary β-boryl radicals to the thermodynamically favored secondary/tertiary radicals for arylation. The mild conditions of this method are suitable for a wide range of aryl halides, resulting in good yields and high regioselectivity. Additionally, this method allows for stereodivergent coupling of cyclic cis-1,2-bis-boronic esters to give trans-substituted products.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2022)

Add to Collection

Article Geochemistry & Geophysics

Adsorption of Sodium of Polyaspartic Acid on Serpentine and Its Effects on Selective Pyrite/Serpentine Flotation

Xihui Fang et al.

Summary: In this study, sodium of polyaspartic acid (PASP) was used as a selective depressant to achieve the selective flotation of pyrite from serpentine. The addition of PASP rendered the surface charge of serpentine negative, breaking the hetero-coagulation between serpentine and pyrite. This resulted in the successful recovery of pyrite from serpentine.

MINERALS (2022)

Add to Collection

Article Chemistry, Organic

Nickel-Catalyzed Cascade Reaction of 2-Vinylanilines with gem-Dichloroalkenes

Jin Lin et al.

Summary: An efficient nickel-catalyzed cascade reaction has been developed for the synthesis of diversely substituted quinolines from 2-vinylanilines and gem-dichloroalkenes. This method provides an effective approach to access quinolines bearing various functional groups from easily available starting materials. Mechanistic studies suggest the involvement of two plausible pathways in the IPr-nickel catalytic system.

ORGANIC LETTERS (2022)

Add to Collection

Article Chemistry, Physical

Investigations into the flotation of molybdenite in the presence of chalcopyrite using (3S,4S,5S,6R)-3,4,5,6-tetrahydroxyoxane-2-carboxylate acid as a novel selective depressant: An experimental and theoretical perspective

Levie Mweene et al.

Summary: The experimental and theoretical investigation of (3S,4S,5S,6R)-3,4,5,6-tetrahydroxyoxane-2-carboxylate (TTC) acid as a chalcopyrite (CPY) depressant during molybdenite-chalcopyrite (MLT-CPY) beneficiation was conducted. The adsorption of TTC onto CPY was found to be higher than onto MLT. The most stable complexes on MLT and CPY were Mo(OH)-4 center dot center dot center dot FeOH+center dot center dot center dot TTC (S = 1) and FeOH+center dot center dot center dot TTC (S = 0) complexes, respectively. The complexes were governed by traditional hydrogen bonding, as well as covalent and other non-covalent interactions. Flotation tests using an economical TTC depressant yielded satisfactory grade, recovery, and separation efficiency for the synthetic mixture of MLT and CPY.

JOURNAL OF MOLECULAR LIQUIDS (2022)

Add to Collection

Article Chemistry, Physical

Design and Characterization of Zeolite/Serpentine Nanocomposite Photocatalyst for Solar Hydrogen Generation

Abeer S. Altowyan et al.

Summary: In this study, a low-cost, high-yield hydrothermal treatment was used to produce nanozeolite, nanoserpentine, and Zeo/Serp nanocomposites. The generated nanostructures showed various morphologies such as nanofibers, nanorods, and hybrid nanofibril/nanorods. The Zeo/Serp (2:1) composite exhibited superior performance as a photoelectrochemical catalyst for solar hydrogen generation compared to its constituents. This research opens up new possibilities for low-cost materials in efficient solar hydrogen production.

MATERIALS (2022)

Add to Collection

Article Engineering, Environmental

The effect of cationic unit structure on reverse demulsification and air flotation performance of cationic polyacrylate

Wenju Zhang et al.

Summary: This paper studied the relationship between the structure and performance of cationic polyacrylates, and prepared polymers with different cationic unit structures. The research results showed that cationic polyacrylates with different unit structures exhibited different air flotation and reverse demulsification efficiencies, providing reference for the selection of chemical agents in oilfield produced water treatment.

JOURNAL OF ENVIRONMENTAL CHEMICAL ENGINEERING (2022)

Add to Collection

Review Metallurgy & Metallurgical Engineering

Flotation of Fine Particles: A Review

Saeed Farrokhpay et al.

Summary: Flotation of fine particles poses challenges due to their large surface area and low collision efficiency with bubbles. Strategies to address this issue include increasing particle size, reducing bubble size, and utilizing reactor-separator type flotation cells for stronger particle-bubble interaction. The paper discusses the advantages and disadvantages of these strategies.

MINERAL PROCESSING AND EXTRACTIVE METALLURGY REVIEW (2021)

Add to Collection

Article Metallurgy & Metallurgical Engineering

Drying Kinetics of a Philippine Nickel Laterite Ore by Microwave Heating

Wei Lv et al.

Summary: Microwave drying of Philippine nickel laterite ore is proposed as an alternative method to reduce air pollution. The study shows that increasing ore bed thickness and microwave power can improve effective diffusivity and reduce specific energy consumption.

MINERAL PROCESSING AND EXTRACTIVE METALLURGY REVIEW (2021)

Add to Collection

Article Engineering, Chemical

Surface chemical and selective flocculation studies on iron oxide and silica suspensions in the presence of xanthan gum

Saravanan Loganathan et al.

Summary: The study showed that the addition of xanthan gum altered the isoelectric point and zeta potential of iron oxide suspensions, while having little effect on the electrokinetic and flocculation characteristics of silica. Additionally, FTIR spectral investigations provided evidence of hydrogen bonding and chemical interaction forces between iron oxide and xanthan gum, leading to a maximum separation efficiency of 65% for iron oxide-silica mixture in selective flocculation tests.

MINERALS ENGINEERING (2021)

Add to Collection

Article Chemistry, Physical

Hydrogen-doped viscoplastic liquid metal microparticles for stretchable printed metal lines

Selvaraj Veerapandian et al.

Summary: This study introduces hydrogen doping to increase the conductivity of liquid metal particles, allowing for the printing of metallic and stretchable circuit lines. The printed lines exhibit excellent mechanical properties and long-term stability, making them suitable for use in various electronic applications.

NATURE MATERIALS (2021)

Add to Collection

Article Engineering, Chemical

Spinel ferrite transformation for enhanced upgrading nickel grade in laterite ore of various types

Jian-ming Gao et al.

Summary: The paper introduces a method of spinel ferrite transformation to enhance the upgrading of nickel grade in low-grade nickeliferous laterite ores. By investigating mineral phase transformation and migration of valuable metals, optimal calcination conditions were determined to significantly increase nickel recovery and nickel content in magnetic fraction after separation.

MINERALS ENGINEERING (2021)

Add to Collection

Article Engineering, Chemical

Experimental and theoretical investigation on the separation of chalcopyrite from biotite using xanthan gum as a selective depressant

Levie Mweene et al.

Summary: Experimental and theoretical analysis showed that using xanthan gum as a selective depressant can effectively separate chalcopyrite from biotite. The adsorption of xanthan gum on chalcopyrite and biotite is pH-dependent, with a chemisorption process observed on both minerals. Analysis using QTAIM and NCI tools indicated that the adsorption of xanthan gum is governed by weak, partial covalent hydrogen bonding and other non-covalent interactions on both chalcopyrite and biotite.

SEPARATION AND PURIFICATION TECHNOLOGY (2021)

Add to Collection

Article Engineering, Chemical

Evaluation of green synthetic depressants for sulfide flotation: Synthesis, characterization and floatation performance to pyrite and chalcopyrite

Sultan Ahmed Khoso et al.

Summary: This study developed a series of low molecular weight starch-based molecules through oxidative treatment of starch, with tricarboxystarch (sodium salt) identified as the most selective and effective depressant for pyrite in chalcopyrite flotation.

SEPARATION AND PURIFICATION TECHNOLOGY (2021)

Add to Collection

Article Engineering, Chemical

Studies on the selective flotation of pyrite from fine serpentine by using citric acid as depressant

Dezhi Liu et al.

Summary: The study showed that citric acid effectively alleviated the depression effect of serpentine on pyrite flotation by adsorbing on the serpentine surface and accelerating the dissolution of magnesium cations. This led to a change in surface charge of serpentine, breaking the hetero-coagulation between serpentine and pyrite and restoring the floatability of pyrite. Based on these findings, citric acid could potentially serve as an effective depressant in the flotation separation of sulfide ore from serpentine.

MINERALS ENGINEERING (2021)

Add to Collection

Article Mining & Mineral Processing

Factors affecting nickel upgrade during selective grinding of low-grade limonitic laterites

E. Petrakis et al.

Summary: The study investigated the optimal grinding conditions for potential nickel upgrade using laterites from Evia island, Greece, through wet grinding batch experiments. Results showed that nickel tends to concentrate in the finer fraction with increasing grinding times, leading to a significant increase in nickel recovery while only a slight decrease in its grade is noticed.

MINERAL PROCESSING AND EXTRACTIVE METALLURGY-TRANSACTIONS OF THE INSTITUTIONS OF MINING AND METALLURGY (2021)

Add to Collection

Article Mining & Mineral Processing

Investigation of the reduction roasting of saprolite ores in the Caron process: reaction mechanisms and reduction kinetics

J. Chen et al.

Summary: Laboratory studies have investigated the mechanisms and kinetics of reactions during the reduction roasting of saprolite ores, focusing on the effects of dehydration, reduction, sintering, and olivine recrystallisation reactions on nickel recovery. The results provide valuable insights into the relative contributions of elementary processes during the reduction roast process, helping to explain behavior observed in industrial practice.

MINERAL PROCESSING AND EXTRACTIVE METALLURGY-TRANSACTIONS OF THE INSTITUTIONS OF MINING AND METALLURGY (2021)

Add to Collection

Review Green & Sustainable Science & Technology

Recovering full metallic resources from waste printed circuit boards: A refined review

Ruijun Qiu et al.

JOURNAL OF CLEANER PRODUCTION (2020)

Add to Collection

Article Engineering, Environmental

An innovative method of recycling metals in printed circuit board (PCB) using solutions from PCB production

Quanyin Tan et al.

JOURNAL OF HAZARDOUS MATERIALS (2020)

Add to Collection

Article Materials Science, Multidisciplinary

Weak ferromagnetic component in goethite (α-FeOOH) and its relation with microstructural characteristics

D. F. Valezi et al.

MATERIALS CHEMISTRY AND PHYSICS (2020)

Add to Collection

Article Engineering, Chemical

Extraction of nickel and cobalt from a laterite ore using the carbothermic reduction roasting-ammoniacal leaching process

Sadia Ilyas et al.

SEPARATION AND PURIFICATION TECHNOLOGY (2020)

Add to Collection

Article Chemistry, Multidisciplinary

A Novel Nanocomposite of Activated Serpentine Mineral Decorated with Magnetic Nanoparticles for Rapid and Effective Adsorption of Hazardous Cationic Dyes: Kinetics and Equilibrium Studies

Moaaz K. Seliem et al.

NANOMATERIALS (2020)

Add to Collection

Article Geology

Mineralogical characterization of low-grade nickel laterites from the North Oman Mountains: Using mineral liberation analyses - scanning electron microscopy-based automated quantitative mineralogy

Salah A. Al-Khirbash

ORE GEOLOGY REVIEWS (2020)

Add to Collection

Article Engineering, Chemical

Breakage process of mineral processing comminution machines - An approach to liberation

Parisa Semsari Parapari et al.

ADVANCED POWDER TECHNOLOGY (2020)

Add to Collection

Article Engineering, Chemical

A comparison of native starch, oxidized starch and CMC as copper-activated pyrite depressants

Brenton Fletcher et al.

MINERALS ENGINEERING (2020)

Add to Collection

Article Mining & Mineral Processing

Mechanism of carbothermic reduction of a sulfur-containing nickeliferous limonitic laterite ore

O. Marzoughi et al.

MINERAL PROCESSING AND EXTRACTIVE METALLURGY-TRANSACTIONS OF THE INSTITUTIONS OF MINING AND METALLURGY (2020)

Add to Collection

Article Mining & Mineral Processing

Study of the kinetics of the magnesium leaching from serpentine bearing chromite overburden rocks for mineral carbonation

Veerendra Singh et al.

MINERAL PROCESSING AND EXTRACTIVE METALLURGY-TRANSACTIONS OF THE INSTITUTIONS OF MINING AND METALLURGY (2020)

Add to Collection

Article Materials Science, Multidisciplinary

A Novel Method of Smelting a Mixture of Two Types of Laterite Ore to Prepare Ferronickel

Xueming Lv et al.

JOM (2019)

Add to Collection

Article Engineering, Chemical

Pre-concentration of nickel in laterite ores using physical separation methods

Saeed Farrokhpay et al.

MINERALS ENGINEERING (2019)

Add to Collection

Article Chemistry, Multidisciplinary

Novel Sodium O-Benzythioethyl Xanthate Surfactant: Synthesis, DFT Calculation and Adsorption Mechanism on Chalcopyrite Surface

Xiaoping Huang et al.

LANGMUIR (2019)

Add to Collection

Article Geochemistry & Geophysics

Characterization of Weda Bay nickel laterite ore from Indonesia

Saeed Farrokhpay et al.

JOURNAL OF GEOCHEMICAL EXPLORATION (2019)

Add to Collection

Review Metallurgy & Metallurgical Engineering

Advanced Review on Extraction of Nickel from Primary and Secondary Sources

Pratima Meshram et al.

MINERAL PROCESSING AND EXTRACTIVE METALLURGY REVIEW (2019)

Add to Collection

Article Engineering, Chemical

Upgrading nickel in laterite ores by flotation

Saeed Farrokhpay et al.

MINERALS ENGINEERING (2018)

Add to Collection

Article Engineering, Chemical

Sodium hexametaphosphate and sodium silicate as dispersants to reduce the negative effect of kaolinite on the flotation of chalcopyrite in seawater

Andres Ramirez et al.

MINERALS ENGINEERING (2018)

Add to Collection

Article Geology

Mineralogical association and Ni-Co deportment in the Wingellina oxide-type laterite deposit (Western Australia)

F. Putzolu et al.

ORE GEOLOGY REVIEWS (2018)

Add to Collection

Article Soil Science

Adsorption of Antimonate, Sulfate, and Phosphate by Goethite: Reversibility and Competitive Effects

Michael E. Essington et al.

SOIL SCIENCE SOCIETY OF AMERICA JOURNAL (2018)

Add to Collection

Review Mining & Mineral Processing

Hydrochloric acid regeneration in hydrometallurgical processes: a review

Caitlyn McKinley et al.

MINERAL PROCESSING AND EXTRACTIVE METALLURGY-TRANSACTIONS OF THE INSTITUTIONS OF MINING AND METALLURGY (2018)

Add to Collection

Article Engineering, Chemical

Utilization of N-carboxymethyl chitosan as selective depressants for serpentine on the flotation of pyrite

Cheng Zhang et al.

INTERNATIONAL JOURNAL OF MINERAL PROCESSING (2017)

Add to Collection

Review Agriculture, Multidisciplinary

Application of Deep Eutectic Solvents (DES) for Phenolic Compounds Extraction: Overview, Challenges, and Opportunities

Mariana Ruesgas-Ramon et al.

JOURNAL OF AGRICULTURAL AND FOOD CHEMISTRY (2017)

Add to Collection

Article Engineering, Chemical

Comminution modeling using mineralogical properties of iron ores

A. Mwanga et al.

MINERALS ENGINEERING (2017)

Add to Collection

Article Engineering, Chemical

Guar gum as a selective flocculant for the beneficiation of alumina rich iron ore slimes: Density functional theory and experimental studies

Vinay Jain et al.

MINERALS ENGINEERING (2017)

Add to Collection

Article Engineering, Chemical

Improved flotation separation of cassiterite from calcite using a mixture of lead (II) ion/benzohydroxamic acid as collector and carboxymethyl cellulose as depressant

Mengjie Tian et al.

MINERALS ENGINEERING (2017)

Add to Collection

Review Engineering, Environmental

Recovery of waste printed circuit boards through pyrometallurgical processing: A review

Huaidong Wang et al.

RESOURCES CONSERVATION AND RECYCLING (2017)

Add to Collection

Article Chemistry, Physical

Breaking Amides using Nickel Catalysis

Jacob E. Dander et al.

ACS CATALYSIS (2017)

Add to Collection

Article Geochemistry & Geophysics

Factors Affecting the Upgrading of a Nickeliferous Limonitic Laterite Ore by Reduction Roasting, Thermal Growth and Magnetic Separation

Filipe Rodrigues et al.

MINERALS (2017)

Add to Collection

Article Geochemistry & Geophysics

Revealing the conditions of Ni mineralization in the laterite profiles of New Caledonia: Insights from reactive geochemical transport modelling

Andrey Myagkiy et al.

CHEMICAL GEOLOGY (2017)

Add to Collection

Article Chemistry, Multidisciplinary

Metallic Nickel Hydroxide Nanosheets Give Superior Electrocatalytic Oxidation of Urea for Fuel Cells

Xiaojiao Zhu et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2016)

Add to Collection

Review Chemistry, Physical

Development of nickel based catalysts for the transformation of natural triglycerides and related compounds into green diesel: a critical review

Christos Kordulis et al.

APPLIED CATALYSIS B-ENVIRONMENTAL (2016)

Add to Collection

Article Engineering, Chemical

Challenges in processing nickel laterite ores by flotation

Saeed Farrokhpay et al.

INTERNATIONAL JOURNAL OF MINERAL PROCESSING (2016)

Add to Collection

Article Engineering, Chemical

Zeta potential study of pentlandite in the presence of serpentine and dissolved mineral species

M. Alvarez-Silva et al.

MINERALS ENGINEERING (2016)

Add to Collection

Article Engineering, Chemical

Surface chemical properties and selective flocculation studies on alumina and silica suspensions in the presence of xanthan gum

L. Saravanan et al.

MINERALS ENGINEERING (2016)

Add to Collection

Article Mining & Mineral Processing

Comparison of leaching and heavy liquid separation methods for low grade nickel lateritic ore

M. Sadigh et al.

TRANSACTIONS OF THE INSTITUTIONS OF MINING AND METALLURGY SECTION C-MINERAL PROCESSING AND EXTRACTIVE METALLURGY (2016)

Add to Collection

Article Metallurgy & Metallurgical Engineering

A two-stage thermal upgrading process for nickeliferous limonitic laterite ores

R. Elliott et al.

CANADIAN METALLURGICAL QUARTERLY (2015)

Add to Collection

Article Metallurgy & Metallurgical Engineering

Reductive atmospheric acid leaching of lateritic smectite/nontronite ores in H2SO4/Cu(II)/SO2 solutions

G. Senanayake et al.

HYDROMETALLURGY (2015)

Add to Collection

Review Materials Science, Multidisciplinary

Production of nuclear grade zirconium: A review

L. Xu et al.

JOURNAL OF NUCLEAR MATERIALS (2015)

Add to Collection

Article Engineering, Chemical

Preconcentration strategies in the processing of nickel laterite ores part 2: Laboratory experiments

Keith Quast et al.

MINERALS ENGINEERING (2015)

Add to Collection

Article Engineering, Chemical

Effects of magnetite on magnetic coating behavior in pentlandite and serpentine system

Jiwei Lu et al.

MINERALS ENGINEERING (2015)

Add to Collection

Article Engineering, Chemical

Deriving the ideal ore texture for microwave treatment of metalliferous ores

A. R. Batchelor et al.

MINERALS ENGINEERING (2015)

Add to Collection

Review Engineering, Chemical

Preconcentration strategies in the processing of nickel laterite ores Part 1: Literature review

Keith Quast et al.

MINERALS ENGINEERING (2015)

Add to Collection

Article Engineering, Chemical

Is progress in energy-efficient comminution doomed?

Tim Napier-Munn

MINERALS ENGINEERING (2015)

Add to Collection

Article Engineering, Chemical

Preconcentration strategies in the processing of nickel laterite ores part 3: Flotation testing

Keith Quast et al.

MINERALS ENGINEERING (2015)

Add to Collection

Article Mining & Mineral Processing

Smelting of difficult laterite ores

Maurice Y. Solar et al.

TRANSACTIONS OF THE INSTITUTIONS OF MINING AND METALLURGY SECTION C-MINERAL PROCESSING AND EXTRACTIVE METALLURGY (2015)

Add to Collection

Article Mining & Mineral Processing

Thermodynamic analysis of selective reduction of nickeliferous limonitic laterite ore by carbon monoxide

C. Pickles et al.

TRANSACTIONS OF THE INSTITUTIONS OF MINING AND METALLURGY SECTION C-MINERAL PROCESSING AND EXTRACTIVE METALLURGY (2015)

Add to Collection

Review Environmental Sciences

An overview of the role of goethite surfaces in the environment

Haibo Liu et al.

CHEMOSPHERE (2014)

Add to Collection

Article Green & Sustainable Science & Technology

Arsenic Removal by Adsorptive Flotation Methods

Unzile Yenial et al.

CLEAN-SOIL AIR WATER (2014)

Add to Collection

Article Geochemistry & Geophysics

A Detailed Assessment of Global Nickel Resource Trends and Endowments

Gavin M. Mudd et al.

ECONOMIC GEOLOGY (2014)

Add to Collection

Article Engineering, Chemical

A preliminary rheological classification of phyllosilicate group minerals

Bulelwa Ndlovu et al.

MINERALS ENGINEERING (2014)

Add to Collection

Article Engineering, Chemical

Understanding interaction mechanisms between pentlandite and gangue minerals by zeta potential and surface force measurements

Andreas M. Kusuma et al.

MINERALS ENGINEERING (2014)

Add to Collection

Article Geochemistry & Geophysics

Nickel Laterite Ore Deposits: Weathered Serpentinites

Charles R. M. Butt et al.

ELEMENTS (2013)

Add to Collection

Article Energy & Fuels

Diagnosis of the Surface Chemistry Effects on Fine Coal Flotation Using Saline Water

Bo Wang et al.

ENERGY & FUELS (2013)

Add to Collection

Article Engineering, Chemical

The effect of phyllosilicate minerals on mineral processing industry

Bulelwa Ndlovu et al.

INTERNATIONAL JOURNAL OF MINERAL PROCESSING (2013)

Add to Collection

Article Metallurgy & Metallurgical Engineering

Existence of Maghemite and Trevorite in Nickel Laterites

Geraldo Magela da Costa et al.

MINERAL PROCESSING AND EXTRACTIVE METALLURGY REVIEW (2013)

Add to Collection

Article Engineering, Chemical

Stirred milling kinetics of siliceous goethitic nickel laterite for selective comminution

Libin Tong et al.

MINERALS ENGINEERING (2013)

Add to Collection

Article Engineering, Chemical

Examining Ni-laterite leach mineralogy & chemistry - a holistic multi-scale approach

Hazel M. A. Hunter et al.

MINERALS ENGINEERING (2013)

Add to Collection

Article Engineering, Chemical

Selective sulphidation and flotation of nickel from a nickeliferous laterite ore

C. T. Harris et al.

MINERALS ENGINEERING (2013)

Add to Collection

Article Mining & Mineral Processing

The reduction behaviour of iron from low grade nickel laterite ore using a solid state deoxidisation method

B. Li et al.

TRANSACTIONS OF THE INSTITUTIONS OF MINING AND METALLURGY SECTION C-MINERAL PROCESSING AND EXTRACTIVE METALLURGY (2013)

Add to Collection

Article Engineering, Chemical

Mineral liberation by high voltage pulses and conventional comminution with same specific energy levels

Eric Wang et al.

MINERALS ENGINEERING (2012)

Add to Collection

Article Mining & Mineral Processing

Kinetic analysis for non-isothermal solid state reduction of nickel laterite ore by carbon monoxide

B. Li et al.

TRANSACTIONS OF THE INSTITUTIONS OF MINING AND METALLURGY SECTION C-MINERAL PROCESSING AND EXTRACTIVE METALLURGY (2012)

Add to Collection

Article Mining & Mineral Processing

Effect of mineralogy and reducing agent on reduction of saprolitic nickel ores

A. Bunjaku et al.

TRANSACTIONS OF THE INSTITUTIONS OF MINING AND METALLURGY SECTION C-MINERAL PROCESSING AND EXTRACTIVE METALLURGY (2012)

Add to Collection

Article Engineering, Chemical

High pressure acid leaching of a refractory lateritic nickel ore

S. Kaya et al.

MINERALS ENGINEERING (2011)

Add to Collection

Article Geochemistry & Geophysics

Density functional calculation of the infrared spectrum of surface hydroxyl groups on goethite (α-FeOOH)

James R. Rustad et al.

AMERICAN MINERALOGIST (2010)

Add to Collection

Article Engineering, Environmental

Using vacuum pyrolysis and mechanical processing for recycling waste printed circuit boards

Laishou Long et al.

JOURNAL OF HAZARDOUS MATERIALS (2010)

Add to Collection

Article Engineering, Chemical

Development of a model for serpentine quantification in nickel laterite minerals by infrared spectroscopy

Andrew Basile et al.

MINERALS ENGINEERING (2010)

Add to Collection

Article Engineering, Chemical

Calcination of low-grade laterite for concentration of Ni by magnetic separation

Jungah Kim et al.

MINERALS ENGINEERING (2010)

Add to Collection

Article Chemistry, Physical

A new application for nickel foam in alkaline fuel cells

F. Bidault et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2009)

Add to Collection

Article Engineering, Chemical

Use of QEMSCAN® for the characterization of Ni-rich and Ni-poor goethite in laterite ores

Jens C. O. Andersen et al.

MINERALS ENGINEERING (2009)

Add to Collection

Article Mining & Mineral Processing

Nickel laterite Part 1 - microstructure and phase characterisations during reduction roasting and leaching

M. A. Rhamdhani et al.

TRANSACTIONS OF THE INSTITUTIONS OF MINING AND METALLURGY SECTION C-MINERAL PROCESSING AND EXTRACTIVE METALLURGY (2009)

Add to Collection

Article Mining & Mineral Processing

Nickel laterite Part 2 - thermodynamic analysis of phase transformations occurring during reduction roasting

M. A. Rhamdhani et al.

TRANSACTIONS OF THE INSTITUTIONS OF MINING AND METALLURGY SECTION C-MINERAL PROCESSING AND EXTRACTIVE METALLURGY (2009)

Add to Collection

Article Mining & Mineral Processing

A comprehensive study of atmospheric pressure leaching of saprolitic laterites in acidic media

W. Luo et al.

TRANSACTIONS OF THE INSTITUTIONS OF MINING AND METALLURGY SECTION C-MINERAL PROCESSING AND EXTRACTIVE METALLURGY (2009)

Add to Collection

Article Geochemistry & Geophysics

Structure and reactivity of synthetic Co-substituted goethites

Mariana Alvarez et al.

AMERICAN MINERALOGIST (2008)

Add to Collection

Review Metallurgy & Metallurgical Engineering

Atmospheric acid leaching of nickel laterites review Part I. Sulphuric acid technologies

R. G. McDonald et al.

HYDROMETALLURGY (2008)

Add to Collection

Review Metallurgy & Metallurgical Engineering

Atmospheric acid leaching of nickel laterites review. Part II. Chloride and bio-technologies

R. G. McDonald et al.

HYDROMETALLURGY (2008)

Add to Collection

Article Engineering, Manufacturing

Modelling of specific energy requirement during high-efficiency deep grinding

S. Ghosh et al.

INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2008)

Add to Collection

Software Review Chemistry, Multidisciplinary

VESTA:: a three-dimensional visualization system for electronic and structural analysis

Koichi Momma et al.

JOURNAL OF APPLIED CRYSTALLOGRAPHY (2008)

Add to Collection

Review Geochemistry & Geophysics

Adsorption and surface oxidation of Fe(II) on metal (hydr)oxides

Tjisse Hiemstra et al.

GEOCHIMICA ET COSMOCHIMICA ACTA (2007)

Add to Collection

Article Chemistry, Physical

Sorption of silicates on goethite, hematite, and magnetite: Experiments and modelling

Norbert Jordan et al.

JOURNAL OF COLLOID AND INTERFACE SCIENCE (2007)

Add to Collection

Article Engineering, Chemical

Volume split control of a hydrocyclone group

T. Neesse et al.

MINERALS ENGINEERING (2007)

Add to Collection

Article Chemistry, Physical

Effect of replacing a hydroxyl group with a methyl group on arsenic (V) species adsorption on goethite (α-FeOOH)

J. S. Zhang et al.

JOURNAL OF COLLOID AND INTERFACE SCIENCE (2007)

Add to Collection

Article Engineering, Environmental

Adsorption of arsenate on synthetic goethite from aqueous solutions

P. Lakshmipathiraj et al.

JOURNAL OF HAZARDOUS MATERIALS (2006)

Add to Collection

Review Biotechnology & Applied Microbiology

Review of xanthan gum production from unmodified starches by Xanthomonas comprestris sp.

S. Rosalam et al.

ENZYME AND MICROBIAL TECHNOLOGY (2006)

Add to Collection

Article Chemistry, Physical

Proven technologies on high-performance Nd-Fe-B sintered magnets

Y Kaneko et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2006)

Add to Collection

Article Engineering, Chemical

Role of acidified sodium silicate in low temperature bitumen extraction from poor-processing oil sand ores

H Li et al.

INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2005)

Add to Collection

Review Chemistry, Multidisciplinary

Directed assembly of metal-cyanide cluster magnets

LMC Beltran et al.

ACCOUNTS OF CHEMICAL RESEARCH (2005)

Add to Collection

Article Chemistry, Physical

Pentlandite-lizardite interactions and implications for their separation by flotation

KE Bremmell et al.

COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS (2005)

Add to Collection

Article Engineering, Chemical

Leaching residue of nickeliferous laterites as a source of iron concentrate

E Stamboliadis et al.

MINERALS ENGINEERING (2004)

Add to Collection

Review Materials Science, Multidisciplinary

Molten carbonate fuel cells

AL Dicks

CURRENT OPINION IN SOLID STATE & MATERIALS SCIENCE (2004)

Add to Collection

Article Metallurgy & Metallurgical Engineering

Beneficiation of a Greek serpentinic nickeliferous ore - Part I. Mineral processing

S Agatzini-Leonardou et al.

HYDROMETALLURGY (2004)

Add to Collection

Article Engineering, Manufacturing

Printed circuit board recycling: A state-of-the-art survey

JZ Li et al.

IEEE TRANSACTIONS ON ELECTRONICS PACKAGING MANUFACTURING (2004)

Add to Collection

Article Chemistry, Physical

Variability in goethite surface site density: evidence from proton and carbonate sorption

M Villalobos et al.

JOURNAL OF COLLOID AND INTERFACE SCIENCE (2003)

Add to Collection

Article Geochemistry & Geophysics

Effects of different crystal faces on the surface charge of colloidal goethite (α-FeOOH) particles:: An experimental and modeling study

F Gaboriaud et al.

GEOCHIMICA ET COSMOCHIMICA ACTA (2003)

Add to Collection

Article Engineering, Chemical

Nickel laterite processing and electrowinning practice

RR Moskalyk et al.

MINERALS ENGINEERING (2002)

Add to Collection

Article Chemistry, Physical

Adsorption of sulfate and copper(II) on goethite in relation to the changes of zeta potentials

RS Juang et al.

JOURNAL OF COLLOID AND INTERFACE SCIENCE (2002)

Add to Collection

Article Engineering, Chemical

The effects of mineralogy on the biological leaching of nickel laterite ores

M Valix et al.

MINERALS ENGINEERING (2001)

Add to Collection

Article Engineering, Chemical

Nickel retention by goethite and hematite

JP Beukes et al.

MINERALS ENGINEERING (2000)

Add to Collection

Article Chemistry, Physical

Distinguishing adsorption and surface precipitation of phosphate on goethite (α-FeOOH)

L Li et al.

JOURNAL OF COLLOID AND INTERFACE SCIENCE (2000)

Add to Collection

© Peeref 2019-2024. All rights reserved.