☆ 4.6 Article

Effect of Austempering Treatment on Microstructure and Mechanical Properties of M50NiL Bearing Steel

METALS AND MATERIALS INTERNATIONAL (2023)

Related references

Note: Only part of the references are listed.

Article Metallurgy & Metallurgical Engineering

Effect of prior martensite on bainite transformation and microstructure of high-carbon nano-bainitic steel

Xin-pan Yu et al.

Summary: By introducing prior martensite, the bainite transformation process can be accelerated, the microstructure of bainite can be improved, and the strength and hardness of high-carbon nano-bainitic steel can be enhanced, although it has some impact on impact toughness.

JOURNAL OF IRON AND STEEL RESEARCH INTERNATIONAL (2022)

Add to Collection

Article Materials Science, Multidisciplinary

Effect of Carbon Concentration Gradient on Multi-Level Composite Microstructure and Performance of M50NiL Steel

Xingfu Yu et al.

Summary: The effect of carbon concentration gradient on the multi-level composite microstructure and hardness of M50NiL steel after vacuum isothermal quenching was studied. Improving the microstructure of the carburized layer significantly increased the impact property of M50NiL steel.

JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2022)

Add to Collection

Article Metallurgy & Metallurgical Engineering

Microstructure of Ultrafine Acicular Bainite and Mechanical Properties of 3Cr2MnNiMo Mold Steel during Austempering

Jinyi Ren et al.

Summary: In this study, the effect of austempering treatment on the microstructure and mechanical properties of 3Cr2MnNiMo mold steel was investigated. The results showed that by changing the austempering temperature, the morphology of martensite and bainite can be effectively controlled, resulting in improved strength of the material.

STEEL RESEARCH INTERNATIONAL (2022)

Add to Collection

Article Materials Science, Multidisciplinary

Effect of carbide precipitation behavior at high temperatures on microstructure and mechanical properties of M50 steel

X. F. Yu et al.

Summary: The effect of carbide precipitation behavior at high temperatures on the microstructure and mechanical properties of M50 steel was studied. It was found that short-term heat holding at high temperatures promotes carbide precipitation along grain boundaries, resulting in more obvious grain boundary characteristics. The stability and content of retained austenite were increased by short-term heat holding, but reduced after tempering. The precipitation of grain boundary carbides reduced the impact toughness, plasticity, and rotational bending fatigue properties of the steel, while slightly reducing its hardness and strength.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2022)

Add to Collection

Article Materials Science, Multidisciplinary

Effect of Austempering Temperature on Microstructure and Mechanical Properties of M50 Bearing Steel

Y. Su et al.

Summary: The effect of austempering temperature on the bainite transformation, carbide precipitation, hardness, and impact toughness of M50 bearing steel was studied using microstructure observation and mechanical property tests. The results show that the austempering temperature significantly affects the bainite content, carbide content, hardness, and impact toughness of the steel.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2022)

Add to Collection

Article Materials Science, Multidisciplinary

Microstructure evolution of carbidic austempered ductile iron at different austempering temperatures

Penghui Yang et al.

Summary: The study reveals that in carbidic austempered ductile iron, acicular ferrite size decreases with increasing austempering temperature, and a fine twin structure can form within acicular ferrite at low temperatures.

JOURNAL OF MATERIALS SCIENCE (2021)

Add to Collection

Article Nanoscience & Nanotechnology

Influence of layer thickness on tensile deformation and fracture in the ferrite plus martensite fine multi-layered steel sheets

Norimitsu Koga et al.

Summary: The distribution of strain and void formation in fine multi-layered steel sheets subjected to tensile deformation was investigated. The influence of layer thickness on deformation and fracture behavior was discussed. Void coalescence at highly strained martensite layer and secondary voids or quasi-cleavage fracture in the ferrite layer contributed to the fracture of the multi-layered steel sheets.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Numerical Simulation of Heat Treatment Process by Incorporating Stress State on Martensitic Transformation to Investigate Microstructure and Stress State of 1045 Steel Gear Parts

Ali Koohi Esfahani

Summary: By developing a finite element algorithm, this study investigates the microstructure evolution and stress state during continuous cooling of 1045 steel gear parts. It was found that considering stress state in microstructure modeling affects martensite starting temperature, and a hybrid quenching method was proposed to increase martensite volume fraction in oil-quenched samples.

METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Effect of pre-existing martensite within the microstructure of nano bainitic steel on its mechanical properties

Behzad Avishan et al.

Summary: Partial quenching below the martensite start temperature accelerates bainite transformation in nanostructured bainitic steels, affecting the strength-ductility combinations. The study found that pre-existing martensite changed the amount of high carbon retained austenite, increasing carbon content in solid solution and dislocation density in austenite. Microstructural changes resulted in strength promotion, reduction of elongation and impact energy, while still maintaining an acceptable balance of strength-elongation-impact energy.

MATERIALS CHEMISTRY AND PHYSICS (2021)

Add to Collection

Article Metallurgy & Metallurgical Engineering

Microstructural Characterizations and Kinetics Model of Isothermal Bainite Formation with the Presence of Prior Martensite in High-Carbon Nanostructured Bainitic Steel

Hui Guo et al.

Summary: By utilizing quenching and subsequent isothermal transformation, prior martensite can be introduced in high-carbon nanostructured bainitic steel to accelerate bainite transformation rate, reduce the size of retained austenite, and shorten the required time for producing a nanosized bainitic microstructure.

STEEL RESEARCH INTERNATIONAL (2021)

Add to Collection

Article Metallurgy & Metallurgical Engineering

Precipitation kinetics of carbides during cyclical and isothermal aging of 2.25Cr-1Mo steel and its effect on mechanical properties

Maribel Leticia Saucedo-Munoz

Summary: The study analyzed carbide precipitation during aging of 2.25Cr-1Mo steel at 550 degrees C. Carbide coarsening occurred with increasing aging time in both aging treatments, but the growth kinetics were faster in the case of cyclical aging. Specimen hardness decreased with aging time in both cases, with a quicker decrease in hardness for cyclical aging.

JOURNAL OF IRON AND STEEL RESEARCH INTERNATIONAL (2021)

Add to Collection

Article Nanoscience & Nanotechnology

Effect of precipitates on the cryogenic fracture toughness of 9%Ni steel flux cored arc weld

Weidong Mu et al.

Summary: The fracture toughness of 9%Ni steel flux cored arc welds decreases with an increasing amount of precipitates, impacting the micro-regional force and deformation. Both carbides and Laves phase have influences on the stress concentration and local plastic deformation, with Laves phase showing a higher impact. The size of carbide has minimal effect on microcrack formation near precipitates at interdendritic region during stretching at cryogenic temperature.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Transformation-Induced Ductility of Reverse Austenite Evolved by Low-Temperature Tempering of Martensite

Pengju Du et al.

METALS (2020)

Add to Collection

Article Materials Science, Multidisciplinary

Designing a high Si reduced activation ferritic/martensitic steel for nuclear power generation by using Calphad method

Chao Liu et al.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2019)

Add to Collection

Article Metallurgy & Metallurgical Engineering

Influence of initial microstructure and grain size on transformation of bainite to austenite in large size forgings

Emna Ben Fredj et al.

JOURNAL OF IRON AND STEEL RESEARCH INTERNATIONAL (2018)

Add to Collection

Article Metallurgy & Metallurgical Engineering

Effect of Ostwald ripening of carbide particles on mechanical properties of SCM435 steel during subcritical annealing

Cheng Ji et al.

JOURNAL OF IRON AND STEEL RESEARCH INTERNATIONAL (2018)

Add to Collection

Article Materials Science, Multidisciplinary

Kinetics model of bainitic transformation with stress

Mingxing Zhou et al.

METALS AND MATERIALS INTERNATIONAL (2018)

Add to Collection

Article Metallurgy & Metallurgical Engineering

Evolution of carbides on surface of carburized M50NiL bearing steel

Jiang-long Lian et al.

JOURNAL OF IRON AND STEEL RESEARCH INTERNATIONAL (2018)

Add to Collection

Article Chemistry, Physical

Isothermal heat treatment of a bearing steel for improved mechanical properties

Chao Huang et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2016)

Add to Collection

Article Materials Science, Multidisciplinary

Effect of prior martensite on bainite transformation in nanobainite steel

W. Gong et al.

ACTA MATERIALIA (2015)

Add to Collection

Article Materials Science, Multidisciplinary

Work hardening response of M50-NiL case hardened bearing steel during shakedown in rolling contact fatigue

N. K. Arakere et al.

MATERIALS SCIENCE AND TECHNOLOGY (2012)

Add to Collection

© Peeref 2019-2024. All rights reserved.