Related references
Note: Only part of the references are listed.Computational Evaluation of Flow-Induced Abrasion of Blade and Ladle in Kanbara Reactors for Hot Metal Desulfurization
Qiang Li et al.
JOM (2022)
Tracking and analysis of interfaces and flow structures in multiphase flows
A. Bussmann et al.
COMPUTERS & FLUIDS (2022)
Droplet-Resolved Modeling on Dispersion Kinetics of Desulfurization Flux in a Mechanically Agitated Ladle for Hot Metal Treatment
Qiang Li et al.
METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE (2022)
On the turbulence modelling of bubble plumes
Qingqing Pan et al.
CHEMICAL ENGINEERING SCIENCE (2021)
Favre-filtered LES-VOF of two-phase flows with eddy viscosity-based subgrid closure models: An a-posteriori analysis
Mahdi Saeedipour et al.
INTERNATIONAL JOURNAL OF MULTIPHASE FLOW (2021)
Effects of Impeller Rotational Speed and Immersion Depth on Flow Pattern, Mixing and Interface Characteristics for Kanbara Reactors Using VOF-SMM Simulations
Qiang Li et al.
METALS (2021)
Interface-Resolved Simulation of Bubbles-Metal-Slag Multiphase System in a Gas-Stirred Ladle
Qiang Li et al.
METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE (2021)
Toward Multiscale Model Development for Multiphase Flow: Direct Numerical Simulation of Dispersed Phases and Multiscale Interfaces in a Gas-Stirred Ladle
Qiang Li et al.
JOM (2021)
Computational Investigation on Effect of Impeller Dimension on Fluid Flow and Interface Behavior for Kanbara Reactor Hot Metal Treatment
Qiang Li et al.
STEEL RESEARCH INTERNATIONAL (2021)
Computational Investigation of Inclusion Removal in the Steel-Refining Ladle Process
Xipeng Guo et al.
PROCESSES (2021)
Slag eye formation in single and dual bottom purged industrial steelmaking ladles
Vishnu Teja Mantripragada et al.
CANADIAN METALLURGICAL QUARTERLY (2020)
Physical and Mathematical Modeling of Flow Structures of Liquid Steel in Ladle Stirring Operations
Rodolfo D. Morales et al.
METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE (2020)
Numerical Simulation of Fluid Flow in a Gas-Stirred Ladle Using a Particle-Free Surface Coupled Model
Bohong Zhu et al.
METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE (2020)
Physical and Mathematical Modelling of Mass Transfer in Ladles due to Bottom Gas Stirring: A Review
Alberto N. Conejo
PROCESSES (2020)
Numerical modeling of multiphase flow in gas stirred ladles: From a multiscale point of view
Linmin Li et al.
POWDER TECHNOLOGY (2020)
Comparison of Euler-Euler Approach and Euler-Lagrange Approach to Model Gas Injection in a Ladle
Yu Liu et al.
STEEL RESEARCH INTERNATIONAL (2019)
Demystifying Underlying Fluid Mechanics of Gas Stirred Ladle Systems with Top Slag Layer Using Physical Modeling and Mathematical Modeling
Rodolfo D. Morales et al.
ISIJ INTERNATIONAL (2019)
Application of Inhomogeneous Discrete Method to the Simulation of Transport, Agglomeration, and Removal of Oxide Inclusions in a Gas-Stirred Ladle
Gujun Chen et al.
JOM (2019)
Physical and CFD Modeling of the Effect of Top Layer Properties on the Formation of Open-Eye in Gas-Stirred Ladles With Single and Dual-Plugs
Eshwar Kumar Ramasetti et al.
STEEL RESEARCH INTERNATIONAL (2019)
Characterization of Cavity Oscillation and Splashing Distribution Under Excitation by Bottom Gas Blowing in a Steelmaking Converter
Mingming Li et al.
JOM (2019)
A Review of Physical and Numerical Approaches for the Study of Gas Stirring in Ladle Metallurgy
Yu Liu et al.
METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE (2019)
Modeling of the Effect of the Gas Flow Rate on the Fluid Flow and Open-Eye Formation in a Water Model of a Steelmaking Ladle
Eshwar Kumar Ramasetti et al.
STEEL RESEARCH INTERNATIONAL (2019)
Argon Bubble Coalescence and Breakup in a Steel Ladle with Bottom Plugs
Wenjie Liu et al.
STEEL RESEARCH INTERNATIONAL (2019)
Numerical modelling of fluid flow and desulphurisation kinetics in an argon-stirred ladle furnace
Q. Cao et al.
IRONMAKING & STEELMAKING (2018)
A CFD-DEM solver to model bubbly flow. Part II: Critical validation in upward vertical pipes including axial evolution
C. Pena-Monferrer et al.
CHEMICAL ENGINEERING SCIENCE (2018)
Numerical modelling of the transport and removal of inclusions in an industrial gas-stirred ladle
Qing Cao et al.
IRONMAKING & STEELMAKING (2018)
Effects of Interphase Forces on Fluid Flow in Gas-Stirred Steel Ladles Using the Eulerian-Lagrangian Multiphase Approach
Haojian Duan et al.
JOM (2018)
Mathematical Investigation of Fluid Flow, Mass Transfer, and Slag-steel Interfacial Behavior in Gas-stirred Ladles
Qing Cao et al.
METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE (2018)
Hydrogen Degassing in a Vacuum Arc Degasser Using a Three-Phase Eulerian Method and Discrete Population Balance Model
Faris Karouni et al.
STEEL RESEARCH INTERNATIONAL (2018)
Toward Better Control of Inclusion Cleanliness in a Gas Stirred Ladle Using Multiscale Numerical Modeling
Jean-Pierre Bellot et al.
MATERIALS (2018)
Twin Roll Casting of Steels: An Overview
Ali Maleki et al.
ISIJ INTERNATIONAL (2017)
A Mathematical Model for the Multiphase Transport and Reaction Kinetics in a Ladle with Bottom Powder Injection
Wentao Lou et al.
METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE (2017)
Computational Investigation of the Splashing Phenomenon Induced by the Impingement of Multiple Supersonic Jets onto a Molten Slag-Metal Bath
Mingming Li et al.
INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2016)
Understanding Characteristic of Abrasion of Refractory Lining Caused by Bath Oscillation in BOF Steelmaking
Qiang Li et al.
JOM (2016)
Recent Advances in the Fluid Dynamics of Ladle Metallurgy
Gordon Irons et al.
ISIJ INTERNATIONAL (2015)
Water Model and CFD-PBM Coupled Model of Gas-Liquid-Slag Three-Phase Flow in Ladle Metallurgy
Linmin Li et al.
ISIJ INTERNATIONAL (2015)
Large Eddy Simulation of Bubbly Flow and Slag Layer Behavior in Ladle with Discrete Phase Model (DPM)-Volume of Fluid (VOF) Coupled Model
Linmin Li et al.
JOM (2015)
Numerical Simulation of the Interaction Between Supersonic Oxygen Jets and Molten Slag-Metal Bath in Steelmaking BOF Process
Qiang Li et al.
METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE (2015)
Effect of Nozzle Diameter on Mixing Time During Bottom-Gas Injection in Metallurgical Ladles
M. S. C. Terrazas et al.
METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE (2015)
Effect of Slag Properties on Mixing Phenomena in Gas-stirred Ladles by Physical Modeling
Adrian Manuel Amaro-Villeda et al.
ISIJ INTERNATIONAL (2014)
Coupling of CFD and PBE Calculations to Simulate the Behavior of an Inclusion Population in a Gas-Stirring Ladle
Jean-Pierre Bellot et al.
METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE (2014)
A numerical modelling investigation into design variables influencing mixing efficiency in full scale gas stirred ladles
Schalk W. P. Cloete et al.
MINERALS ENGINEERING (2013)
Effects of Top Layer, Nozzle Arrangement, and Gas Flow Rate on Mixing Time in Agitated Ladles by Bottom Gas Injection
A. N. Conejo et al.
METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE (2013)
Numerical Simulation of Gas and Liquid Two-Phase Flow in Gas-Stirred Systems Based on Euler-Euler Approach
Wentao Lou et al.
METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE (2013)
Numerical Modelling of Inclusion Behaviour in a Gas-stirred Ladle
Valerio De Felice et al.
ISIJ INTERNATIONAL (2012)
Modeling Related to Secondary Steel Making
Du Sichen
STEEL RESEARCH INTERNATIONAL (2012)
Effect of Both Radial Position and Number of Porous Plugs on Chemical and Thermal Mixing in an Industrial Ladle Involving Two Phase Flow
Francisco Daniel Maldonado-Parra et al.
ISIJ INTERNATIONAL (2011)
Numerical Simulation of Fluid Flow and Interfacial Behavior in Three-phase Argon-Stirred Ladles with One Plug and Dual Plugs
Heping Liu et al.
STEEL RESEARCH INTERNATIONAL (2011)
CFD modeling of plume and free surface behavior resulting from a sub-sea gas release
Schalk Cloete et al.
APPLIED OCEAN RESEARCH (2009)
Modeling of Three-phase Flows and Behavior of Slag/Steel Interface in an Argon Gas Stirred Ladle
Baokuan Li et al.
ISIJ INTERNATIONAL (2008)
Mathematical modeling and validation of wall shear stress in gas stirred vessels
Rajeev Singh et al.
ISIJ INTERNATIONAL (2008)
Gas-liquid reaction model in gas-stirred systems: Part 1. Numerical model
Gabriela Venturini et al.
METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE (2007)
Evaluation of subgrid scale kinetic energy models in large eddy simulations of turbulent channel flow
CM Winkler et al.
INTERNATIONAL JOURNAL OF NUMERICAL METHODS FOR HEAT & FLUID FLOW (2006)
Flow simulation in bubble columns in regard to bubble coalescence and break-up utilizing LES and DEM
H Takeda et al.
JOURNAL OF CHEMICAL ENGINEERING OF JAPAN (2004)
Macroscopic models for gas stirred ladies
D Mazumdar et al.
ISIJ INTERNATIONAL (2004)
The use of fundamental process models in studying ladle refining operations
PG Jonsson et al.
ISIJ INTERNATIONAL (2001)