☆ 4.6 Article

A Constitutive Model of Tensile Deformation of a Metastable Medium-Entropy Alloy

METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2023)

Related references

Note: Only part of the references are listed.

Article Materials Science, Multidisciplinary

Fe55Co17.5Ni10Cr12.5Mo5 High-Entropy Alloy with Outstanding Cryogenic Mechanical Properties Driven by Deformation-Induced Phase Transformation Behavior

Hae Don Park et al.

Summary: This study investigates the deformation-induced phase transformation and its effect on the mechanical properties of high-entropy alloys. The results show that deformation-induced phase transformation can enhance the plasticity of high-entropy alloys, leading to improved tensile strength and ductility.

METALS AND MATERIALS INTERNATIONAL (2023)

Add to Collection

Article Chemistry, Physical

The temperature dependence of strengthening mechanisms in Ni-based superalloys: A newly re-defined cuboidal model and its implications for strength design

Liberty Wu et al.

Summary: A new model for precipitation strengthening in Ni-based superalloys with large amounts of cuboidal gamma' particles has been developed, which integrates weak and strong pair-coupling models. The model accurately predicts alloy strength over a wide temperature range and provides insights into the physical parameters controlling particle strengthening. The study highlights that cuboidal gamma' particles allow for easier strength optimization of turbine discs compared to spherical gamma'.

JOURNAL OF ALLOYS AND COMPOUNDS (2023)

Add to Collection

Article Materials Science, Multidisciplinary

Microstructure Characteristics, Mechanical Properties and Strain Hardening Behavior of Nitrogen-Bearing Fe-0.2 C-5Mn TRIP Steel

Bao-Guang Zhang et al.

Summary: The deliberate addition of nitrogen in the Fe-0.2C-5Mn TRIP steel not only increases the austenite fraction and improves the austenite stability, but also leads to the simultaneous precipitation of cementite and carbonitride in ferrite and at grain boundaries. This results in increased yield strength and strong serrated flow behavior, contributing to the excellent strength-ductility balance of the steel.

METALS AND MATERIALS INTERNATIONAL (2023)

Add to Collection

Article Nanoscience & Nanotechnology

Constitutive modeling and finite element analysis of metastable medium entropy alloy

Jihye Kwon et al.

Summary: In this study, a constitutive model for a metastable ferrous medium entropy alloy was developed based on deformation-induced martensitic transformation behavior. The model considered the crystal structure transformation, DIMT kinetics, and the behavior of both the FCC and BCC phases. The model's applicability was verified through comparison with experimental data.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2022)

Add to Collection

Article Materials Science, Multidisciplinary

Elucidating the temperature dependence of TRIP in Q&P steels using synchrotron X-Ray diffraction, constituent phase properties, and strain-based kinetics models

Christopher B. Finfrock et al.

Summary: Understanding deformation-induced martensitic transformation (DIMT) is crucial for interpreting the structure-property relationships in transformation-induced plasticity (TRIP) assisted steels. Researchers addressed the challenge of capturing DIMT kinetics in modern TRIP-assisted steels and discussed the importance of temperature-dependent toughness in determining the mechanical properties.

ACTA MATERIALIA (2022)

Add to Collection

Article Metallurgy & Metallurgical Engineering

Assessment of a physical based modelling suitable to capture the mechanical behaviour at large plastic strain of aluminium alloys

Olivier Bouaziz et al.

Summary: This study reports the application of a physical-based constitutive law for capturing flow stress and strain-hardening in a wide range of plastic strain. The law is validated through experiments on the effect of alloying elements and temperature in aluminium alloys, particularly through bulge tests at room and warm temperature.

METALLURGICAL RESEARCH & TECHNOLOGY (2022)

Add to Collection

Article Materials Science, Multidisciplinary

Effect of Microstructural Features on the High-Cycle Fatigue Behavior of CoCrFeMnNi High-Entropy Alloys Deformed at Room and Cryogenic Temperatures

Gyung Tae Lee et al.

Summary: This study investigated the influence of deformation twins and dislocation cell structures on the fatigue properties of the CoCrFeMnNi high-entropy alloy through rotational bending fatigue tests. It was found that prestraining at room temperature resulted in higher fatigue resistance and fatigue limit compared to prestraining at cryogenic temperature, with different aspects of micro-void formation affecting crack initiation and fatigue properties.

METALS AND MATERIALS INTERNATIONAL (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Nano-scale heterogeneity-driven metastability engineering in ferrous medium-entropy alloy induced by additive manufacturing

Jeong Min Park et al.

Summary: Selective laser melting (SLM) technology offers unprecedented advantages in improving the mechanical properties of metals and alloys through unique dislocation network and solute segregation.

ACTA MATERIALIA (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Novel, Equimolar, Multiphase CoCuNiTiV High-Entropy Alloy: Phase Component, Microstructure, and Compressive Properties

Jiaojiao Yi et al.

Summary: The novel 3D transition metal high entropy alloy CoCuNiTiV exhibits different phase components and microstructure in the as-cast and annealed conditions. The hardness of the annealed alloy is slightly higher than that of the as-cast alloy, while the yield strength and fracture strength are highly similar.

METALS AND MATERIALS INTERNATIONAL (2021)

Add to Collection

Article Nanoscience & Nanotechnology

Enhanced cryogenic tensile properties with multi-stage strain hardening through partial recrystallization in a ferrous medium-entropy alloy

Jae Wung Bae et al.

Summary: In this study, we demonstrate the formation of partially recrystallized bimodal microstructures in the Fe60Co15Ni15Cr10 (at%) ferrous medium-entropy alloy through a single-step heat treatment after cold-rolling. This process enhances the yield-strength and ultimate-tensile-strength of the alloy while maintaining a persistent ductility of 61%, thus avoiding the strength-ductility trade-off. The retention of deformation substructures allows for a significant increase in yield-strength compared to a fully-recrystallized state.

SCRIPTA MATERIALIA (2021)

Add to Collection

Article Chemistry, Physical

Temperature- and strain-dependent thermally-activated deformation mechanism of a ferrous medium-entropy alloy

Jungwan Lee et al.

Summary: This study investigated the quasi-static tensile properties of Fe60Co15Ni15Cr10 ferrous medium-entropy alloy at 298 K and 77 K in terms of thermally-activated deformation mechanism. The alloy showed relatively high strain rate sensitivity and low activation volume at 77 K, where deformation-induced martensitic transformation occurred. Different rate-controlling mechanisms were identified at both temperatures for early and latter deformation, with dislocation behaviors supporting the outstanding cryogenic tensile properties of the alloy.

INTERMETALLICS (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Development of an Advanced Ultrahigh Strength TRIP Steel and Evaluation of Its Unique Strain Hardening Behavior

N. Saeidi et al.

METALS AND MATERIALS INTERNATIONAL (2020)

Add to Collection

Article Materials Science, Multidisciplinary

On the phase transformation and dynamic stress-strain partitioning of ferrous medium-entropy alloy using experimentation and finite element method

Jae Wung Bae et al.

MATERIALIA (2020)

Add to Collection

Article Materials Science, Multidisciplinary

Exceptional phase-transformation strengthening of ferrous medium entropy alloys at cryogenic temperatures

Jae Wung Bae et al.

ACTA MATERIALIA (2018)

Add to Collection

Article Materials Science, Multidisciplinary

A TRIP-assisted dual-phase high-entropy alloy: Grain size and phase fraction effects on deformation behavior

Zhiming Li et al.

ACTA MATERIALIA (2017)

Add to Collection

Article Multidisciplinary Sciences

A fracture-resistant high-entropy alloy for cryogenic applications

Bernd Gludovatz et al.

SCIENCE (2014)

Add to Collection

Article Multidisciplinary Sciences

A Promising New Class of High-Temperature Alloys: Eutectic High-Entropy Alloys

Yiping Lu et al.

SCIENTIFIC REPORTS (2014)

Add to Collection

Article Materials Science, Multidisciplinary

Work Hardening Behavior in Steel with Multiple TRIP Mechanisms

M. C. McGrath et al.

METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2013)

Add to Collection

Article Materials Science, Multidisciplinary

Revisited Storage and Dynamic Recovery of Dislocation Density Evolution Law: Toward a Generalized Kocks-Mecking Model of Strain-Hardening

O. Bouaziz

ADVANCED ENGINEERING MATERIALS (2012)

Add to Collection

Article Materials Science, Multidisciplinary

Iso-work increment assumption for heterogeneous material behavior modelling

O Bouaziz et al.

ADVANCED ENGINEERING MATERIALS (2004)

Add to Collection

© Peeref 2019-2024. All rights reserved.