Related references
Note: Only part of the references are listed.Precipitation and phase transformation behavior during high-temperature aging of a cobalt modified Fe-24Cr-(22-x)Ni-7Mo-xCo superaustenitic stainless steel
Luhai Liao et al.
JOURNAL OF MATERIALS SCIENCE (2022)
Hot deformation and dynamic recrystallization in Al-Mg-Si alloy
Jiachen Li et al.
MATERIALS CHARACTERIZATION (2021)
Dynamic precipitation of σ-phase and element partitioning in equiatomic CoCrFeMnNi high-entropy alloy
Unhae Lee et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2021)
Orientation-dependent dynamic recrystallization of super austenitic stainless steels
Lin Wang et al.
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2021)
Influence of N on precipitation behavior, associated corrosion and mechanical properties of super austenitic stainless steel S32654
Shucai Zhang et al.
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2020)
Mechanisms of DRX nucleation with grain boundary bulging and subgrain rotation during the hot working of nickel-based superalloys with columnar grains
Bingchao Xie et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2019)
An insight into oversaturated deformation-induced sigma precipitation in Super304H austenitic stainless steel
Qingwen Zhou et al.
MATERIALS & DESIGN (2019)
On microstructure characterization of Fe-Cr-Ni-Mo-N super-austenitic stainless steel during hot deformation
Yan-sen Hao et al.
JOURNAL OF IRON AND STEEL RESEARCH INTERNATIONAL (2019)
Effects of carbon and nitrogen on austenite stability and tensile deformation behavior of 15Cr-15Mn-4Ni based austenitic stainless steels
Nithi Saenarjhan et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)
Twining and dynamic recrystallization in austenitic Alloy 718 during friction welding
F. C. Liu et al.
MATERIALS CHARACTERIZATION (2018)
Precipitation behavior and phase transformation mechanism of super austenitic stainless steel S32654 during isothermal aging
Shucai Zhang et al.
MATERIALS CHARACTERIZATION (2018)
Dislocation and twinning mechanisms for dynamic recrystallization of as-cast Mn18Cr18N steel
Fengming Qin et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)
Hot deformation characteristics and processing map of a phosphorous modified super austenitic stainless steel
K. Arun Babu et al.
MATERIALS & DESIGN (2017)
Microstructure evolution and mechanical properties of friction stir welding super-austenitic stainless steel S32654
Huabing Li et al.
MATERIALS & DESIGN (2017)
Study on the dynamic recrystallization model and mechanism of nuclear grade 316LN austenitic stainless steel
Shenglong Wang et al.
MATERIALS CHARACTERIZATION (2016)
Hot Ductility Characterization of Sanicro-28 Super-Austenitic Stainless Steel
A. Mirzaei et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2016)
γ-Phase transformation, dynamic recrystallization and texture of a forged TiAl-based alloy based on plane strain compression at elevated temperature
Yingying Zong et al.
MATERIALS & DESIGN (2016)
Grain orientation statistics of grain-clusters and the propensity of multiple-twinning during grain boundary engineering
Tingguang Liu et al.
MATERIALS & DESIGN (2016)
Hot deformation characteristics and processing map analysis for Nickel-based corrosion resistant alloy
L. Wang et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2015)
On the Stacking Fault Energy Evaluation and Deformation Mechanism of Sanicro-28 Super-Austenitic Stainless Steel
Mohammad Moallemi et al.
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2015)
Constitutive equation and dynamic recrystallization behavior of as-cast 254SMO super-austenitic stainless steel
Ying Han et al.
MATERIALS & DESIGN (2015)
Twin boundary characters established during dynamic recrystallization in a nickel alloy
Hui Shi et al.
MATERIALS CHARACTERIZATION (2015)
Influence of stored energy on twin formation during primary recrystallization
W. Wang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2014)
Hot deformation characteristic and processing map of superaustenitic stainless steel S32654
Enxiang Pu et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2014)
Effect of Strain Rate on the Dynamic Recrystallization Behavior in a Nitrogen-Enhanced 316L(N)
Sumantra Mandal et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2014)
Contribution of deformation mechanisms to strength and ductility in two Cr-Mn grade austenitic stainless steels
A. S. Hamada et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2013)
An electron backscattered diffraction study on the dynamic recrystallization behavior of a nickel-chromium alloy (800H) during hot deformation
Yu Cao et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2013)
Phase transformations and mechanical properties in heat treated superaustenitic stainless steels
T. Koutsoukis et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2013)
Passivation behaviour of Alloy 31 (UNS N08031) in polluted phosphoric acid at different temperatures
C. Escriva-Cerdan et al.
CORROSION SCIENCE (2012)
Optimization of processing parameters based on high temperature flow behavior and microstructural evolution of a nitrogen enhanced 316L(N) stainless steel
Dipti Samantaray et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2012)
Twinning and martensite in a 304 austenitic stainless steel
Y. F. Shen et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2012)
Role of Twinning on Dynamic Recrystallization and Microstructure During Moderate to High Strain Rate Hot Deformation of a Ti-Modified Austenitic Stainless Steel
Sumantra Mandal et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2012)
Quantification of multiple twinning in face centred cubic materials
C. Cayron
ACTA MATERIALIA (2011)
Microstructure characterization and tensile properties of β phase containing TiAl pancake
H. Z. Niu et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2011)
A critical review of experimental results and constitutive descriptions for metals and alloys in hot working
Y. C. Lin et al.
MATERIALS & DESIGN (2011)
Optimization of hot working parameters for thermo-mechanical processing of modified 9Cr-1Mo (P91) steel employing dynamic materials model
Dipti Samantaray et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2011)
A Study on Microstructural Evolution and Dynamic Recrystallization During Isothermal Deformation of a Ti-Modified Austenitic Stainless Steel
Sumantra Mandal et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2011)
Deformation Behaviour and Microstructural Evolution During Hot Compression of AISI 9041
B. Bradaskja et al.
STEEL RESEARCH INTERNATIONAL (2011)
Characterization of Precipitation Sequences in Superaustenitic Stainless Steels
T. Koutsoukis et al.
SOLID-SOLID PHASE TRANSFORMATIONS IN INORGANIC MATERIALS, PTS 1-2 (2011)
Characterization of hot deformation behavior of 410 martensitic stainless steel using constitutive equations and processing maps
A. Momeni et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2010)
Hot deformation behavior and microstructural evolution of a superaustenitic stainless steel
A. Momeni et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2010)
Modelling discontinuous dynamic recrystallization using a physically based model for nucleation
D. G. Cram et al.
ACTA MATERIALIA (2009)
Crevice corrosion behaviour of superaustenitic stainless steels: Dynamic electrochemical impedance spectroscopy and atomic force microscopy studies
S. Nagarajan et al.
CORROSION SCIENCE (2009)
Dynamic Recrystallization of Austenite in Ni-30 Pct Fe Model Alloy: Microstructure and Texture Evolution
Hossein Beladi et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2009)
Grain Cluster Microstructure and Grain Boundary Character Distribution in Alloy 690
Shuang Xia et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2009)
Optimisation of cold and warm workability of commercially pure titanium using dynamic materials model (DMM) instability maps
S. Venugopal et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2008)
Recrystallization in AISI 304 austenitic stainless steel during and after hot deformation
A. Dehghan-Manshadi et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2008)
Hot deformation and recrystallization of austenitic stainless steel: Part I. Dynamic recrystallization
A. Dehghan-Manshadi et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2008)
Evolution and characterization of dynamically recrystallized microstructure in a titanium-modified austenitic stainless steel using ultrasonic and EBSD techniques
Sumantra Mandal et al.
PHILOSOPHICAL MAGAZINE (2008)
Evaluation of intragranular misorientation parameters measured by EBSD in a hot worked austenitic stainless steel
D. Jorge-Badiola et al.
JOURNAL OF MICROSCOPY (2007)
Formation of shear bands and strain-induced martensite during plastic deformation of metastable austenitic stainless steels
J. Talonen et al.
ACTA MATERIALIA (2007)
The role of annealing twins during recrystallization of Cu
D. P. Field et al.
ACTA MATERIALIA (2007)
Randomization of texture during recrystallization of austenite in a cold rolled metastable austenitic stainless steel
Sandip Ghosh Chowdhury et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2007)
Microstructural, compositional and residual stress evaluation of CO2 laser welded superaustenitic AISI 904L stainless steel
A Zambon et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2006)
Mechanisms of grain boundary engineering
V Randle et al.
ACTA MATERIALIA (2006)
Study by EBSD of the development of the substructure in a hot deformed 304 stainless steel
D Jorge-Badiola et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2005)
A model of continuous dynamic recrystallization
S Gourdet et al.
ACTA MATERIALIA (2003)
Hot working of two AISI 304 steels: a comparative study
M El Wahabi et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2003)
Constitutive analysis in hot working
HJ McQueen et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2002)
The adiabatic correction factor for deformation heating during the uniaxial compression test
RL Goetz et al.
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2001)
Dynamic recrystallization behavior of AISI 304 stainless steel
SI Kim et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2001)
An experimental study of the recrystallization mechanism during hot deformation of aluminium
S Gourdet et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2000)
Share Paper
