☆ 4.2 Article

Testing and modeling for the tensile strength of nylon badminton string at different processing conditionsPrufung und Modellierung der Zugfestigkeit von Badmintonsaiten aus Nylon bei unterschiedlichen Verarbeitungsbedingungen

MATERIALWISSENSCHAFT UND WERKSTOFFTECHNIK (2023)

Related references

Note: Only part of the references are listed.

Article Materials Science, Multidisciplinary

Investigation on Milling Quality of Stone-Plastic Composite Using Response Surface Methodology

Zhanwen Wu et al.

Summary: This study performed a series of milling experiments to investigate the effects of milling parameters on the cutting quality of stone-plastic composites. The optimal conditions for minimal surface roughness were determined, and a reliable mathematical model for surface roughness was developed.

JOM (2022)

Add to Collection

Article Chemistry, Physical

Study of Cutting Power and Power Efficiency during Straight-Tooth Cylindrical Milling Process of Particle Boards

Rongrong Li et al.

Summary: The cutting power consumption of milling has a direct effect on the economic benefits of manufacturing particle boards. This study investigates the influence of milling parameters on the cutting power and finds that the rake angle, rotation speed of the main shaft, and depth of milling are the key factors affecting the cutting power.

MATERIALS (2022)

Add to Collection

Article Forestry

Investigation on Cutting Power of Wood-Plastic Composite Using Response Surface Methodology

Wangyu Xu et al.

Summary: In this study, RSM was used to investigate the cutting power and optimal cutting conditions of wood-plastic composite. A cutting power model was developed based on experimental results, and the effects of various factors were analyzed. The optimal cutting condition obtained can be applied in industrial manufacturing to achieve efficient machining and energy savings.

FORESTS (2022)

Add to Collection

Article Materials Science, Paper & Wood

PREDICTION OF SURFACE ROUGHNESS OF CO2 LASER MODIFIED POPLAR WOOD VIA RESPONSE SURFACE METHODOLOGY

Rongrong Li et al.

Summary: The CO2 laser is used as an environmentally friendly thermal treatment for wood materials due to its advantages of short treatment period and no wastewater and oil produced. However, it also affects the surface roughness of the treated wood, which in turn affects the wooden product properties. This study analyzed the influence of laser parameters on surface roughness and found that laser power increased the surface roughness of poplar wood, while feed speed and path spacing decreased the surface roughness. It is important to scientifically predict and guide the selection of reasonable modification process parameters for the modified wood surface.

MADERAS-CIENCIA Y TECNOLOGIA (2022)

Add to Collection

Article Engineering, Electrical & Electronic

Assessment of Surface Roughness in Milling of Beech Using a Response Surface Methodology and an Adaptive Network-Based Fuzzy Inference System

Zhaolong Zhu et al.

Summary: This study focused on improving the cutting quality of beech wood during milling by investigating the changes in surface roughness under different cutting conditions. A relationship model between milling conditions and surface roughness was established using response surface methodology and adaptive network-based fuzzy inference system. The optimal milling condition, which includes a rake angle of 15 degrees, a spindle speed of 3357 r/min, and a depth of cut of 0.62 mm, was determined for achieving smooth surface in actual machining.

MACHINES (2022)

Add to Collection

Article Engineering, Electrical & Electronic

Modeling and Predicting the Machined Surface Roughness and Milling Power in Scot's Pine Helical Milling Process

Rongrong Li et al.

Summary: Helical milling of Scots pine was studied to evaluate machinability based on surface roughness and milling power consumption. The results showed that surface roughness decreased with an increase in helical angle and rotation speed, while increased with an increase in milling depth. However, milling power consumption increased with an increase in helical angle and milling depth, but showed a slight downward trend with an increase in rotation speed. The optimized combination of helical angle, rotation speed, and milling depth were determined to improve surface quality and save power consumption.

MACHINES (2022)

Add to Collection

Article Engineering, Electrical & Electronic

Energy Efficiency Optimization for Machining of Wood Plastic Composite

Zhaolong Zhu et al.

Summary: Enhancing energy efficiency is crucial for achieving green manufacturing. This study focuses on the energy efficiency of spiral milling in wood plastic composites and develops a model to establish the relationship between energy efficiency and milling conditions. The findings show that milling depth is positively correlated to power efficiency, while the spiral angle and feed per tooth display non-monotonic behavior. Optimal milling conditions are determined for the highest material removal rate and power efficiency.

MACHINES (2022)

Add to Collection

Article Materials Science, Composites

Effects of temperature and fiber orientation on the tensile behavior of short carbon fiber reinforcedPEEKcomposites

Baoning Chang et al.

Summary: The study found that the mechanical properties of SCF/PEEK composites exhibit significant anisotropy under different temperatures and fiber orientations, with fibers mainly aligned along the mold flow direction. As temperature increases, both elastic modulus and tensile strength decrease, while fracture strain increases.

POLYMER COMPOSITES (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Milling performance of stone-plastic composite with diamond cuttersFrasleistung an Stein-Kunststoffverbundwerkstoff mit einem Diamantfraser

F. Zhang et al.

Summary: By conducting milling tests and using response surface methodology, optimal cutting parameters for stone plastic composite straight-tooth milling were determined to improve processing efficiency and reduce production costs.

MATERIALWISSENSCHAFT UND WERKSTOFFTECHNIK (2021)

Add to Collection

Proceedings Paper Materials Science, Multidisciplinary

Study on the Tribological Properties of MC Nylon Composites Filled with Hydraulic Oil

S. Yuan et al.

4TH INTERNATIONAL CONFERENCE ON ADVANCED ENGINEERING AND TECHNOLOGY (4TH ICAET) (2018)

Add to Collection

Article Materials Science, Multidisciplinary

Surface modification of carbon fibers and the selective laser sintering of modified carbon fiber/nylon 12 composite powder

Wu Jing et al.

MATERIALS & DESIGN (2017)

Add to Collection

Proceedings Paper Engineering, Manufacturing

Optimization of Hot Press Parameters on Tensile Strength for Unidirectional Long Kenaf Fiber Reinforced Polylactic-Acid Composite

I. Tharazi et al.

ADVANCES IN MATERIAL & PROCESSING TECHNOLOGIES CONFERENCE (2017)

Add to Collection

Article Nanoscience & Nanotechnology

Nylon-Graphene Composite Nonwovens as Monolithic Conductive or Capacitive Fabrics

Qin Pan et al.

ACS APPLIED MATERIALS & INTERFACES (2017)

Add to Collection

Article Mechanics

Improving the strength and service life of jute/epoxy laminar composites for structural applications

M. Pinto et al.

COMPOSITE STRUCTURES (2016)

Add to Collection

Review Engineering, Geological

A Review of the Tensile Strength of Rock: Concepts and Testing

Matthew A. Perras et al.

GEOTECHNICAL AND GEOLOGICAL ENGINEERING (2014)

Add to Collection

Article Automation & Control Systems

Friction stir welding of AZ61A magnesium alloy A parametric study

S. Rajakumar et al.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2013)

Add to Collection

Article Forestry

Determining the mechanical properties of hazel forks by testing their component parts

Duncan Slater et al.

TREES-STRUCTURE AND FUNCTION (2013)

Add to Collection

Article Polymer Science

Optimization of Tensile Strength of Poly(Lactic Acid)/Graphene Nanocomposites Using Response Surface Methodology

B. W. Chieng et al.

POLYMER-PLASTICS TECHNOLOGY AND ENGINEERING (2012)

Add to Collection

Proceedings Paper Materials Science, Multidisciplinary

Application of Nanometer Materials into Badminton Racquet Strings

Li Menglong et al.

ADVANCED MATERIALS AND PROCESSES II, PTS 1-3 (2012)

Add to Collection

Article Engineering, Mechanical

An organically modified montmorillonite/nylon-12 composite powder for selective laser sintering

C. Z. Yan et al.

RAPID PROTOTYPING JOURNAL (2011)

Add to Collection

Article Polymer Science

Effect of water absorption on the plastic deformation behavior of nylon 6

V. Miri et al.

EUROPEAN POLYMER JOURNAL (2009)

Add to Collection

Article Construction & Building Technology

Tensile and low cycle fatigue behavior of corroded reinforcing steel bars S400

C. A. Apostolopoulos et al.

CONSTRUCTION AND BUILDING MATERIALS (2007)

Add to Collection

Article Construction & Building Technology

Strength properties of nylon- and polypropylene-fiber-reinforced concretes

PS Song et al.

CEMENT AND CONCRETE RESEARCH (2005)

Add to Collection

Article Engineering, Mechanical

Improvement of frictional properties and abrasive wear resistance, of nylon/graphite composite by oil impregnation

SC Kang et al.

WEAR (2003)

Add to Collection

Article Materials Science, Composites

Effects of temperature and strain rate on the tensile behavior of short fiber reinforced polyamide-6

Z Wang et al.

POLYMER COMPOSITES (2002)

Add to Collection

Article Polymer Science

Toughenability of Nylon-6 with CaCO3 filler particles:: new findings and general principles

MWL Wilbrink et al.

POLYMER (2001)

Add to Collection

© Peeref 2019-2024. All rights reserved.