☆ 4.4 Article

Improving the wear resistance of the magnesium alloy WE43 by cold sprayed Ni-Al2O3 and Ni-Zn-Al2O3 coatings

MATERIALS TESTING (2023)

Related references

Note: Only part of the references are listed.

Review Chemistry, Physical

Multifunctional cold spray coatings for biological and biomedical applications: A review

Tzu-Ying Liao et al.

Summary: This article explores the fabrication, performance factors, and latest developments of cold spray coatings in biomedical applications. Cold spray coatings can be widely used in the biomedical field, including biocompatibility, anti-infection, corrosion resistance, and wear resistance. In addition, the article discusses the expansion of cold spray coatings and their potential applications in antiviral fields.

PROGRESS IN SURFACE SCIENCE (2022)

Add to Collection

Article Nanoscience & Nanotechnology

Thermal stability and mechanical properties of cold-sprayed Nickel-Yttria coating

Bharat Gwalani et al.

Summary: The Ni-Y2O3 coatings produced through cold spray deposition technique exhibited improved phase stability and mechanical properties after annealing, with a 1.5 times increase in hardness and better thermal and mechanical stability compared to pure Ni coatings.

SCRIPTA MATERIALIA (2022)

Add to Collection

Article Materials Science, Characterization & Testing

Surface roughness prediction of wire electric discharge machining (WEDM)-machined AZ91D magnesium alloy using multilayer perceptron, ensemble neural network, and evolving product-unit neural network

Turan Gurgenc et al.

Summary: Magnesium alloy parts are highly valued in industries for their lightweight and high specific strengths. Conventional manufacturing methods face difficulties in producing Mg alloys, but nontraditional methods like wire electric discharge machining (WEDM) can solve these problems. Predicting surface roughness (SR) using artificial intelligence methods eliminates the difficulties and provides advantages in terms of time, material, and cost. This study used different parameters to cut AZ91D using WEDM and compared different methods for predicting SR, with EPUNN demonstrating better performance.

MATERIALS TESTING (2022)

Add to Collection

Article Materials Science, Characterization & Testing

Effect of reinforcement particle amounts on dry sliding wear behavior of shot-peened SiC/A356 composites

Coskun Yolcu et al.

Summary: This study focuses on improving the wear properties of aluminum matrix composites through shot peening treatment, and verifies the deformation caused by shot peening using X-ray diffraction tests.

MATERIALS TESTING (2022)

Add to Collection

Article Materials Science, Coatings & Films

Improved microstructure and properties of cold sprayed zinc coatings in the as sprayed condition

Gidla Vinay et al.

Summary: Cold sprayed zinc coatings were deposited on mild steel substrate and their microstructure and properties were evaluated. The results showed that cold sprayed coatings performed better than coatings from other techniques, primarily due to improved inter-splat bonding. Finite element analysis also supported these findings.

SURFACE & COATINGS TECHNOLOGY (2022)

Add to Collection

Article Materials Science, Multidisciplinary

Influence of sodium pentaborate (B5H10NaO13) additive in plasma electrolytic oxidation process on WE43 magnesium alloys

Taha Cagri Senocak et al.

Summary: In recent years, research has focused on the effects of adding various nanoparticles and chemicals dissolved in electrolytes to chemicals. This paper proposes the idea of using sodium pentaborate in the electrolyte PEO coating on the WE43 magnesium alloy and investigates its tribological and corrosion properties. The results show that the sodium pentaborate additive supports the formation of hard oxide compounds, providing corrosion protection and reducing wear rate in comparison to non-additive PEO coatings. The experimental results suggest that sodium pentaborate can be used as an electrolyte additive for advanced functional coating materials in tribological applications.

MATERIALS TODAY COMMUNICATIONS (2022)

Add to Collection

Article Materials Science, Multidisciplinary

Microstructure, mechanical properties and fracture behavior of a new WE43 alloy

Gui-Long Jia et al.

Summary: The microstructures, mechanical properties and fracture behaviors of a new WE43 alloy were investigated. The optimal solution treatment and aging treatment resulted in a large amount of beta '-phases dispersed and precipitated at the grain interior, providing good comprehensive mechanical properties of the alloy. Further studies on the fracture behaviors in different states show significant differences in comparison with traditional WE43 and other modified WE43 alloys.

RARE METALS (2021)

Add to Collection

Article Materials Science, Coatings & Films

Optimization of ceramic content in nickel-alumina composite coatings obtained by low pressure cold spraying

M. Winnicki et al.

Summary: The technology of nickel-alumina composite coatings obtained by low-pressure cold spray (LPCS) was described in this paper. The content of alumina reinforcement and the morphology of cladded powders were optimized by mixing different commercial and developed powders. The coatings' microhardness and bond strength varied for different mixtures of powders used in the spraying process.

SURFACE & COATINGS TECHNOLOGY (2021)

Add to Collection

Article Chemistry, Physical

Research progress on surface protective coatings of biomedical degradable magnesium alloys

Yun Liu et al.

Summary: Magnesium alloys as medical materials have attracted attention for their degradability and biocompatibility, but face challenges such as corrosion and wear. Surface modification is an effective method to enhance corrosion resistance and improve degradation behavior and biological activity.

JOURNAL OF ALLOYS AND COMPOUNDS (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Corrosion resistance of WE43 Mg alloy in sodium chloride solution

Gualter Silva Pereira et al.

Summary: The study showed that the WE43 Mg alloy exhibited better corrosion resistance in a sodium chloride solution compared to commercially pure Mg, with a corrosion rate 10 to 100 times lower. This was mainly attributed to the nature of the corrosion product layer and its impact on the cathodic reaction of hydrogen gas evolution.

MATERIALS CHEMISTRY AND PHYSICS (2021)

Add to Collection

Article Materials Science, Coatings & Films

Corrosion resistance and tribological behavior of ZK30 magnesium alloy coated by plasma electrolytic oxidation

Joel da Silva Rodrigues et al.

Summary: The study applied plasma electrolytic oxidation (PEO) to create a coating on a magnesium alloy, ZK30, enhancing its corrosion resistance and wear resistance for potential orthopedic applications involving friction and wear. This technology has shown promising results in reducing hydrogen release, decreasing susceptibility to localized corrosion, and altering surface topography and chemistry.

SURFACE & COATINGS TECHNOLOGY (2021)

Add to Collection

Article Materials Science, Coatings & Films

One-step in situ synthesis of graphene oxide/MgAl-layered double hydroxide coating on a micro-arc oxidation coating for enhanced corrosion protection of magnesium alloys

Yanning Chen et al.

Summary: The research focused on enhancing the anti-corrosion performance of MAO coating by preparing GO/LDH-MAO composite coating on AZ31 magnesium alloy. The organic combination of Mg-Al LDH and GO significantly improved the corrosion protection ability of the coating, revealing promising potential for practical large-scale applications.

SURFACE & COATINGS TECHNOLOGY (2021)

Add to Collection

Proceedings Paper Materials Science, Multidisciplinary

Tribological studies of Ni-SiC and Ni-Al2O3 composite coatings by Pulsed Electrodeposition

R. Karthik et al.

Summary: The study suggests that Pulse Electrodeposition is a common technique used to produce materials with high abrasion mechanical resistance. Experimental and theoretical investigations have identified Current Density, Duty cycle, and Frequency as important parameters for grain refinement. Future work involves studying the friction and wear properties of the coatings.

MATERIALS TODAY-PROCEEDINGS (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Characteristics of selenium-containing coatings on WE43 magnesium alloy by micro-arc oxidation

Xiaoting Shi et al.

MATERIALS LETTERS (2020)

Add to Collection

Article Materials Science, Multidisciplinary

Optimising the torsional properties and corrosion resistance of biodegradable WE43 Mg alloy by ECAP and subsequent ageing

Yi Zhang et al.

MATERIALS TECHNOLOGY (2020)

Add to Collection

Article Materials Science, Multidisciplinary

Comparison of the short and long-term degradation behaviors of as-cast pure Mg, AZ91 and WE43 alloys

Ezgi Butev Ocal et al.

MATERIALS CHEMISTRY AND PHYSICS (2020)

Add to Collection

Article Metallurgy & Metallurgical Engineering

Characterization of Tantalum Oxide Sol-Gel-coated AZ91 Mg Alloys

Canser Gul et al.

TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS (2020)

Add to Collection

Article Chemistry, Physical

Mechanical, corrosion and biological properties of advanced biodegradable Mg-MgF2 and WE43-MgF2 composite materials prepared by spark plasma sintering

Drahomir Dvorsky et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2020)

Add to Collection

Article Materials Science, Coatings & Films

Enhancing structural integrity, corrosion resistance and wear properties of Mg alloy by heat treated cold sprayed Al coating

Sumera Siddique et al.

SURFACE & COATINGS TECHNOLOGY (2020)

Add to Collection

Article Engineering, Chemical

Sandblasting parameter variation effect on galvanized steel surface chemical composition, roughness and free energy

A. Bechikh et al.

INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES (2020)

Add to Collection

Article Chemistry, Physical

Tribological behavior of graphene anchored Mg-Al layered double hydroxide film on Mg alloy pre-sprayed Al coating

Huishu Wu et al.

APPLIED SURFACE SCIENCE (2020)

Add to Collection

Article Chemistry, Physical

The Fundamental Comparison of Zn-2Mg and Mg-4Y-3RE Alloys as a Perspective Biodegradable Materials

Jiri Kubasek et al.

MATERIALS (2019)

Add to Collection

Article Engineering, Chemical

Effect of dislocation density on adhesion strength of electroforming Ni layer on Cu substrate

Zhong Zhao et al.

JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY (2019)

Add to Collection

Article Chemistry, Physical

A combined coating strategy based on atomic layer deposition for enhancement of corrosion resistance of AZ31 magnesium alloy

Xiangmei Liu et al.

APPLIED SURFACE SCIENCE (2018)

Add to Collection

Article Materials Science, Multidisciplinary

A study on corrosion resistance of Al magnetron sputtering coated AZ31 magnesium alloy

Ehsan Goli et al.

VACUUM (2018)

Add to Collection

Article Electrochemistry

On the stability of the oxides film formed on a magnesium alloy containing rare-earth elements

Samuel Leleu et al.

ELECTROCHIMICA ACTA (2018)

Add to Collection

Article Engineering, Biomedical

Microstructure, mechanical properties, biocompatibility, and in vitro corrosion and degradation behavior of a new Zn-5Ge alloy for biodegradable implant materials

Xian Tong et al.

ACTA BIOMATERIALIA (2018)

Add to Collection

Article Materials Science, Multidisciplinary

Cold spraying - A materials perspective

H. Assadi et al.

ACTA MATERIALIA (2016)

Add to Collection

Article Nanoscience & Nanotechnology

Effect of heat treatment on microstructures and mechanical properties of a cast Mg-Y-Nd-Zr alloy

Huizhong Li et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2016)

Add to Collection

Article Materials Science, Coatings & Films

Fracture mechanism of an Al/AlN/CrAlN gradient coating on nitrogen implanted magnesium alloy

Y. Z. Cao et al.

SURFACE & COATINGS TECHNOLOGY (2016)

Add to Collection

Article Materials Science, Coatings & Films

Reactive-sputter-deposited β-Ta2O5 and TaON nanoceramic coatings on Ti-6Al-4V alloy against wear and corrosion damage

Jiang Xu et al.

SURFACE & COATINGS TECHNOLOGY (2016)

Add to Collection

Article Engineering, Biomedical

Enhancement of the mechanical properties of AZ31 magnesium alloy via nanostructured hydroxyapatite thin films fabricated via radio-frequency magnetron sputtering

M. A. Surmeneva et al.

JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2015)

Add to Collection

Article Materials Science, Multidisciplinary

Improving anti-wear and anti-corrosion properties of AM60 magnesium alloy by ion implantation and Al/AlN/CrAlN/CrN/MoS2 gradient duplex coating

Zhiwen Xie et al.

VACUUM (2014)

Add to Collection

Article Materials Science, Coatings & Films

Tantalum coated NiTi alloy by PIIID for biomedical application

Y. Zhou et al.

SURFACE & COATINGS TECHNOLOGY (2013)

Add to Collection

Article Materials Science, Coatings & Films

Microstructural and mechanical characterization of thermal sprayed nickel-alumina composite coatings

H. S. Grewal et al.

SURFACE & COATINGS TECHNOLOGY (2013)

Add to Collection

Article Engineering, Mechanical

Tribological behavior of electroless Ni-B coatings on magnesium and AZ91D alloy

E. Correa et al.

WEAR (2013)

Add to Collection

Article Materials Science, Multidisciplinary

Effect of cold working and sandblasting on the microhardness, tensile strength and corrosion resistance of AISI 316L stainless steel

Suyitno et al.

INTERNATIONAL JOURNAL OF MINERALS METALLURGY AND MATERIALS (2012)

Add to Collection

Article Chemistry, Physical

Effect of substrate hardness on the deformation behavior of subsequently incident particles in cold spraying

Shuo Yin et al.

APPLIED SURFACE SCIENCE (2011)

Add to Collection

Article Materials Science, Multidisciplinary

Deposition of nano-scaled CrTiAlN multilayer coatings with different negative bias voltage on Mg alloy by unbalanced magnetron sputtering

Yongjing Shi et al.

VACUUM (2010)

Add to Collection

Article Materials Science, Coatings & Films

Characterizations of cold-sprayed Nickel-Alumina composite coating with relatively large Nickel-coated Alumina powder

Wen-Ya Li et al.

SURFACE & COATINGS TECHNOLOGY (2008)

Add to Collection

Article Materials Science, Coatings & Films

Investigation of Al-Al2O3 cold spray coating formation and properties

Eric Irissou et al.

JOURNAL OF THERMAL SPRAY TECHNOLOGY (2007)

Add to Collection

Article Materials Science, Multidisciplinary

Fabrication of Al and Al/Ti coatings on magnesium alloy by sputtering

Guosong Wu

MATERIALS LETTERS (2007)

Add to Collection

Article Materials Science, Coatings & Films

The influence of pulse plating parameters on the hardness and wear resistance of nickel-alumina composite coatings

ME Bahrololoom et al.

SURFACE & COATINGS TECHNOLOGY (2005)

Add to Collection

Article Materials Science, Multidisciplinary

Bonding mechanism in cold gas spraying

H Assadi et al.

ACTA MATERIALIA (2003)

Add to Collection

Article Materials Science, Composites

Laser composite surfacing of a magnesium alloy with silicon carbide

JD Majumdar et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2003)

Add to Collection

Review Chemistry, Physical

Protective coatings on magnesium and its alloys - a critical review

JE Gray et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2002)

Add to Collection

© Peeref 2019-2024. All rights reserved.