☆ 4.7 Article

Understanding the effect of deformation combined with heat treatment on age hardening of Al-Zn-Mg-Cu alloy AA7075

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2023)

Related references

Note: Only part of the references are listed.

Article Materials Science, Multidisciplinary

Microstructural stability and paint bake response of pre-aged AA7075

Z. Ma et al.

Summary: High strength AA7xxx alloys with long ageing times are used in the automotive industry to provide significant strength/weight benefits. Pre-ageing has been investigated as a method to reduce total ageing time by combining it with the paint bake cycle. This study presents the first results on the precipitate evolution during pre-ageing, natural ageing and paint bake of AA7075 using SAXS, TEM and isothermal calorimetry techniques. It demonstrates that a stable microstructure can be achieved through pre-ageing at 80 degrees C for 8 hours, and a high T6 hardness can be obtained through a short paint bake process with uniformly distributed precipitates.

MATERIALS CHARACTERIZATION (2023)

Add to Collection

Article Materials Science, Multidisciplinary

Dynamic Precipitation in Supersaturated Al-Zn-Mg-Cu Alloy During Warm Stretching

Joseph Robson et al.

Summary: The effect of warm stretching on precipitation in AA7075 alloy was investigated. It was found that deformation can strongly influence the evolution of precipitates, with higher strain resulting in faster growth rate.

METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2023)

Add to Collection

Article Materials Science, Multidisciplinary

Interactions between plastic deformation and precipitation in Aluminium alloys: A crystal plasticity model

Madeleine Bignon et al.

Summary: This study presents a crystal plasticity model that accounts for the dynamic precipitation process in aluminium alloys. The model considers the influence of evolving precipitate distribution on dislocation glide and the accelerated precipitation kinetics caused by deformation. It integrates the effect of precipitates on deformation behavior into the crystal plasticity constitutive law. The spatio-temporal modeling of deformation's influence on precipitation kinetics is achieved using a multi-class precipitation kinetic model. The model's application to the growth and coarsening of shearable precipitates in pre-aged AA7075 alloy under deformation at 150 degrees C reveals significant improvements in uniform elongation and tensile stress.

ACTA MATERIALIA (2023)

Add to Collection

Article Materials Science, Multidisciplinary

Modelling dynamic precipitation in pre-aged aluminium alloys under warm forming conditions

Madeleine Bignon et al.

ACTA MATERIALIA (2022)

Add to Collection

Article Materials Science, Multidisciplinary

Comparisons of Age Hardening and Precipitation Behavior in 7075 Alloy Under Single and Double-Stage Aging Treatments

Yun Fan et al.

Summary: Various heat treatments were conducted on 7075 alloy in this study to reduce treatment time while achieving similar mechanical properties as the traditional T6 tempered alloy. Hardness tests showed that the double aging treatment and single aging treatment had high similarity in precipitates, mainly consisting of Cr-containing large dispersoids and fine precipitates. Advanced microscopy techniques were used to compare the two treatments.

METALS AND MATERIALS INTERNATIONAL (2021)

Add to Collection

Article Nanoscience & Nanotechnology

Precipitation strengthening in naturally aged Al-Zn-Mg-Cu alloy

Sang-Hwa Lee et al.

Summary: The research revealed that the formation and evolution of GPI and GPII zones during natural aging had a significant impact on the mechanical properties of the Al-7.6Zn-2.7Mg-2.0Cu-0.1Zr-0.07Ti alloy. The Zn/Mg atomic ratio, mean radius, number density, and volume fraction of the GP zones also played crucial roles in influencing the mechanical properties of the alloy.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2021)

Add to Collection

Article Materials Science, Characterization & Testing

Investigation of the unloading yield effect in 7075 Al alloys based on microstructural and digital image correlation analysis

Howook Choi et al.

MATERIALS CHARACTERIZATION (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Deformation Enhanced Diffusion in Aluminium Alloys

J. D. Robson

METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2020)

Add to Collection

Article Materials Science, Multidisciplinary

(Al, Zn)3Zr dispersoids assisted η′ precipitation in anAl-Zn-Mg-Cu-Zr alloy

Huan Zhao et al.

MATERIALIA (2020)

Add to Collection

Article Multidisciplinary Sciences

Precipitation strengthening of aluminum alloys by room-temperature cyclic plasticity

Wenwen Sun et al.

SCIENCE (2019)

Add to Collection

Article Chemistry, Physical

Stabilization of 7xxx aluminium alloys

Johannes A. Oesterreicher et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2018)

Add to Collection

Article Nanoscience & Nanotechnology

Constitutive modeling of flow behavior and microstructure evolution of AA7075 in hot tensile deformation

Wenchao Xiao et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)

Add to Collection

Article Nanoscience & Nanotechnology

Improved bake-hardening response of Al-Zn-Mg-Cu alloy through pre-aging treatment

Yun-Soo Lee et al.

SCRIPTA MATERIALIA (2018)

Add to Collection

Article Nanoscience & Nanotechnology

Warm formability and post-forming microstructure/property of high-strength AA 7075-T6 Al alloy

Wangtu Huo et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2016)

Add to Collection

Article Materials Science, Multidisciplinary

Mechanical behavior and strengthening mechanisms in ultrafine grain precipitation-strengthened aluminum alloy

Kaka Ma et al.

ACTA MATERIALIA (2014)

Add to Collection

Article Chemistry, Physical

Precipitation behaviour of Al-Zn-Mg-Cu alloy and diffraction analysis from η′ precipitates in four variants

Wenchao Yang et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2014)

Add to Collection

Article Materials Science, Multidisciplinary

Quantitative Characterization of Precipitate Microstructures in Metallic Alloys Using Small-Angle Scattering

Alexis Deschamps et al.

METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2013)

Add to Collection

Article Astronomy & Astrophysics

Precipitate characterisation in metallic systems by small-angle X-ray or neutron scattering

Frederic De Geuser et al.

COMPTES RENDUS PHYSIQUE (2012)

Add to Collection

Article Chemistry, Physical

Effect of ageing on microstructure and mechanical properties of bulk, cryorolled, and room temperature rolled Al 7075 alloy

Sushanta Kumar Panigrahi et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2011)

Add to Collection

Article Materials Science, Multidisciplinary

Influence of alloy composition and heat treatment on precipitate composition in Al-Zn-Mg-Cu alloys

T. Marlaud et al.

ACTA MATERIALIA (2010)

Add to Collection

Article Nanoscience & Nanotechnology

Characterization of the microstructure in random and textured polycrystals and single crystals by diffraction line profile analysis

Gabor Ribarik et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2010)

Add to Collection

Article Chemistry, Physical

Effect of post equal-channel-angular-pressing aging on the modified 7075 Al alloy containing Sc

W. J. Kim et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2008)

Add to Collection

Article Nanoscience & Nanotechnology

The strength of friction stir welded and friction stir processed aluminium alloys

M. J. Starink et al.

SCRIPTA MATERIALIA (2008)

Add to Collection

Article Materials Science, Multidisciplinary

Optimizing the strength and ductility of fine structured 2024 Al alloy by nano-precipitation

S. Cheng et al.

ACTA MATERIALIA (2007)

Add to Collection

Article Chemistry, Multidisciplinary

Simultaneously increasing the ductility and strength of nanostructured alloys

Yong-Hao Zhao et al.

ADVANCED MATERIALS (2006)

Add to Collection

Article Materials Science, Multidisciplinary

Characterization of the evolution of the volume fraction of precipitates in aged AlMgSiCu alloys using DSC technique

S Esmaeili et al.

MATERIALS CHARACTERIZATION (2005)

Add to Collection

© Peeref 2019-2024. All rights reserved.