Related references
Note: Only part of the references are listed.From simple binary to complex multicomponent eutectic alloys
Isaac Chang et al.
PROGRESS IN MATERIALS SCIENCE (2022)
Five decades of research on the development of eutectic as engineering materials
Chandra Sekhar Tiwary et al.
PROGRESS IN MATERIALS SCIENCE (2022)
On cooling rates dependence of microstructure and mechanical properties of refractory high-entropy alloys HfTaTiZr and HfNbTiZr
Hailong Huang et al.
SCRIPTA MATERIALIA (2022)
Multicomponent high-entropy Cantor alloys
B. Cantor
PROGRESS IN MATERIALS SCIENCE (2021)
Heat treatment of high-pressure die casting Al-Mg-Si-Mn-Zn alloys
O. Trudonoshyn et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2021)
Microstructure evolution and mechanical properties of new die-cast Al-Si-Mg-Mn alloys
Qing Cai et al.
MATERIALS & DESIGN (2020)
A new Zr-rich intermetallic phase in an Al-14Si-3Cu-4.5Ni casting alloy with trace additions of Zr
Min-Su Jo et al.
INTERMETALLICS (2020)
Effect of ε-Al3Ni phase on mechanical properties of Al-Si-Cu-Mg-Ni alloys at elevated temperature
Lijie Zuo et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2020)
Quantified contribution of β and β′ precipitates to the strengthening of an aged Al-Mg-Si alloy
Mingjun Yang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2020)
Enhanced mechanical properties of Al-Si-Cu-Mn-Fe alloys at elevated temperatures through grain refinement and dispersoid strengthening
Haoyu Li et al.
MATERIALS SCIENCE AND TECHNOLOGY (2020)
Regulating microstructures and mechanical properties of Al-Fe-Ni alloys
Zeyu Bian et al.
PROGRESS IN NATURAL SCIENCE-MATERIALS INTERNATIONAL (2020)
Consideration of kinetics on intermetallics formation in solid-solution high entropy alloys
T. H. Chou et al.
ACTA MATERIALIA (2020)
A review on nano-/ultrafine advanced eutectic alloys
Barnasree Chanda et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2020)
Effect of short T6 heat treatment on the microstructure and the mechanical properties of newly developed die-cast Al-Si-Mg-Mn alloys
Qing Cai et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2020)
A Study on Material Properties of Intermetallic Phases in a Multicomponent Hypereutectic Al-Si Alloy with the Use of Nanoindentation Testing
Miroslaw Tupaj et al.
MATERIALS (2020)
A novel heat-resistant Al-Si-Cu-Ni-Mg base material synergistically strengthened by Ni-rich intermetallics and nano-AlNp microskeletons
Kaiqi Hu et al.
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2019)
Single-phase high-entropy intermetallic compounds (HEICs): bridging high-entropy alloys and ceramics
Naixie Zhou et al.
SCIENCE BULLETIN (2019)
Effects of θ' precipitates on the mechanical performance and fracture behavior of an Al-Cu alloy subjected to overaged condition
Lin Gao et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)
High strength and ductility aluminium alloy processed by high pressure die casting
Xixi Dong et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2019)
On the origin of a remarkable increase in the strength and stability of an Al rich Al-Ni eutectic alloy by Zr addition
Prafull Pandey et al.
ACTA MATERIALIA (2019)
Formation of Al15Mn3Si2 Phase During Solidification of a Novel Al-12%Si-4%Cu-1.2%Mn Heat-Resistant Alloy and Its Thermal Stability
Xiaojing Suo et al.
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2018)
Influence of 3D connectivity of rigid phases on damage evolution during tensile deformation of an AlSi12Cu4Ni2 piston alloy
Katrin Bugelnig et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)
Cr-induced morphology change of primary Mn-rich phase in Al-Si-Cu-Mn heat resistant aluminum alloys and its contribution to high temperature strength
Guangjin Li et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)
High-Temperature Behavior of High-Pressure Diecast Alloys Based on the Al-Si-Cu System: The Role Played by Chemical Composition
Elisabetta Gariboldi et al.
METALS (2018)
In situ synthesizing SiC particles and its strengthening effect on an Al-Si-Cu-Ni-Mg piston alloy
Xiaofan Du et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2017)
Effects of Nd on microstructure and mechanical properties of cast Al-Si-Cu-Ni-Mg piston alloys
Lina Han et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2017)
Effect of Q-Al5Cu2Mg8Si6 phase on mechanical properties of Al-Si-Cu-Mg alloy at elevated temperature
Lijie Zuo et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)
The generalized thermodynamic rule for phase selection in multicomponent alloys
Y. F. Ye et al.
INTERMETALLICS (2015)
Microstructural, mechanical and electrical characterization of directionally solidified Al-Si-Mg eutectic alloy
Yusuf Kaygisiz et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2015)
High-temperature mechanical properties and fracture mechanisms of Al-Si piston alloy reinforced with in situ TiB2 particles
Gang Han et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2015)
Enhanced mechanical properties of an Al-Si-Cu-Mg alloy at 300°C: Effects of Mg and the Q-precipitate phase
A. R. Farkoosh et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2015)
Chemical composition of the Ni-containing intermetallic phases in the multicomponent Al alloys
Malgorzata Warmuzek
JOURNAL OF ALLOYS AND COMPOUNDS (2014)
Heterogeneous Nucleation of α-Al Grain on Primary α-AlFeMnSi Intermetallic Investigated Using 3D SEM Ultramicrotomy and HRTEM
Wenchao Yang et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2014)
Morphological evolution of ZrAlSi phase and its impact on the elevated-temperature properties of Al-Si piston alloy
Tong Gao et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2013)
Effect of iron on the microstructure and mechanical property of Al-Mg-Si-Mn and Al-Mg-Si diecast alloys
Shouxun Ji et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2013)
Evolution of nickel-rich phases in Al-Si-Cu-Ni-Mg piston alloys with different Cu additions
Yang Yang et al.
MATERIALS & DESIGN (2012)
Physical and mechanical properties of Al-Si-Ni eutectic alloy
Ugur Boyuk
METALS AND MATERIALS INTERNATIONAL (2012)
Eutectic Al-Si-Cu-Fe-Mn alloys with enhanced mechanical properties at room and elevated temperature
E. R. Wang et al.
MATERIALS & DESIGN (2011)
Microstructural characterization of unidirectional solidified eutectic Al-Si-Ni alloy
U. Boyuk et al.
MATERIALS CHARACTERIZATION (2011)
The combined use of EBSD and EDX analyses for the identification of complex intermetallic phases in multicomponent Al-Si piston alloys
C-L Chen et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2010)
Heat treatment of high-pressure die castings
R. N. Lumley et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2007)
High-temperature. mechanics properties of in situ TiB2p reinforced Al-Si alloy composites
HZ Yi et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2006)
Constituent phase diagrams of the Al-Cu-Fe-Mg-Ni-Si system and their application to the analysis of aluminium piston alloys
NA Belov et al.
ACTA MATERIALIA (2005)
Mechanical properties and microstructure of aluminum alloy 2618 with Al3(Sc, Zr) phases
K Yu et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2004)
Diffusion coefficients of some solutes in fcc and liquid Al: critical evaluation and correlation
Y Du et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2003)
An overview of the development of Al-Si-alloy based material for engine applications
HZ Ye
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2003)
Decomposition of supersaturated solid solutions in Al-Cu-Mg-Si alloys
DG Eskin
JOURNAL OF MATERIALS SCIENCE (2003)
Recent development in aluminium alloys for the automotive industry
WS Miller et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2000)