☆ 4.7 Article

Microstructure evolution and mechanical behavior of Fe-Mn-Al-C low-density steel upon aging

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2023)

Related references

Note: Only part of the references are listed.

Article Materials Science, Multidisciplinary

Ultrahigh strength and high ductility lightweight steel achieved by dual nanoprecipitate strengthening and dynamic slip refinement

G. F. Zhang et al.

Summary: In this study, the microstructure and tensile properties of a thermomechanically treated and aged lightweight Fe-Mn-Al-C-V steel were investigated. The results showed that the aged steel exhibited high yield strength and good ductility, with the nanosized particles and second phase strengthening mechanisms playing significant roles.

MATERIALS LETTERS (2023)

Add to Collection

Article Materials Science, Multidisciplinary

Ultrahigh strength in lightweight steel via avalanche multiplication of intermetallic phases and dislocation

Sen Xiang et al.

Summary: Lightweight high-strength steel is an important subject in the field of structural materials. Recent studies have shown that the use of B2 intermetallic phase can further enhance the mechanical properties of metal alloys. In this study, a thermal-controlled high strain rate plastic deformation process called warm laser shock peening (wLSP) was used to process a lightweight Fe-Mn-Al-C steel, resulting in the precipitation of B2 intermetallic phase and high density dislocations. The strong coupling effect between the B2 intermetallic precipitates and shock wave leads to the avalanche multiplication of ultrahigh density and ultrafine B2 precipitates, significantly improving the strength and ductility of the material.

ACTA MATERIALIA (2023)

Add to Collection

Article Materials Science, Multidisciplinary

Enhancing strength and ductility in a near medium Mn austenitic steel via multiple deformation mechanisms through nanoprecipitation

Junheng Gao et al.

Summary: By massive nano-precipitation, the grain sizes of a near medium Mn austenitic steel were successfully refined, leading to a transition of deformation mechanism and achieving a unique combination of high strength and large elongation.

ACTA MATERIALIA (2023)

Add to Collection

Article Biochemistry & Molecular Biology

The impact of misorientation on the grain boundary energy in bi-crystal copper: an atomistic simulation study

Ke Wang et al.

Summary: Atomistic simulations were used to investigate the relationships among misorientation, dislocation density, and grain boundary energy of twist and tilt bi-crystal grain boundaries. The results show that the dislocation density affects the grain boundary energy, with grain boundaries without dislocations having higher energy than those with dislocations. Additionally, the grain boundary energy increases with the dislocation density of the grain boundary. A new relationship between misorientation angle and grain boundary energy is proposed.

JOURNAL OF MOLECULAR MODELING (2022)

Add to Collection

Article Materials Science, Multidisciplinary

Probing the effect of intragranular premature κ-carbide on incipient plasticity behavior in austenite-based Fe-Win-Al-(Cr)-C steels

Jianlei Zhang et al.

Summary: This study investigated the effect of nanoscale α-carbide precipitates on the incipient plasticity behavior of austenite in Fe-Mn-Al-(Cr)-C low-density steels. It was found that despite the decrease in α-carbide content with Cr addition, its effect on incipient plasticity strength was negligible, with only a slight increase in shear stress for dislocation nucleation. In contrast, the increased interstitial C atoms with Cr content enhanced lattice cohesions and impeded nucleation events by increasing the required shear stress.

MATERIALS RESEARCH LETTERS (2022)

Add to Collection

Article Engineering, Manufacturing

Manufacturing and forging issues encountered while upscaling 1.3C30Mn10Al-austenitic and 0.65C12Mn-duplex low-density steels

Idurre Kaltzakorta et al.

Summary: This work discusses the challenges encountered when manufacturing and forging two low density steels in different scales. The study reveals the difficulties in scaling up the production process and subsequent forging of the ingots, highlighting the importance of geometry, dimensions, and homogenization temperatures in forging properties. Possible causes of scale dependence are proposed based on experimental results, hot axial compression tests, and thermodynamic simulations.

MATERIALS AND MANUFACTURING PROCESSES (2022)

Add to Collection

Article Materials Science, Multidisciplinary

The effect of Cr content on intragranular κ-carbide precipitation in Fe-Mn-Al-(Cr)-C low-density steels: A multiscale investigation

Jianlei Zhang et al.

Summary: The effect of Cr content on intragranular kappa-carbide precipitation behaviors in Fe-Mn-Al-Cr-C low-density steels was investigated. It was found that the volume fraction of kappa-carbides decreased and the growth rate slowed down with increasing Cr content. The precipitation temperature and temperature range of kappa-carbides were also affected by the increased Cr content. The presence of Cr atoms in the kappa-carbide structure increased interfacial energy and nucleation energy, making kappa-carbide formation more difficult. The increased interfacial energy, improved solubility of Al and C, and decreased diffusion coefficient of C in gamma-austenite caused by increasing Cr content resulted in a slower growth rate of the kappa-carbides.

MATERIALS CHARACTERIZATION (2022)

Add to Collection

Article Materials Science, Multidisciplinary

Effect of cooling rate on the precipitation behavior of.-carbide in Fe-32Mn-11Al-0.9C low density steel

Tinghui Man et al.

Summary: The effect of cooling rate on the precipitation behavior of kappa-carbide in Fe-32Mn-11Al-0.9C low density steel was studied. The results showed that decreasing the cooling rate resulted in increased content and size of kappa-carbide precipitations, which had different effects on the nanohardness of austenite and delta-ferrite.

MATERIALS LETTERS (2022)

Add to Collection

Article Nanoscience & Nanotechnology

Ultrahigh strength-high ductility 1 GPa low density austenitic steel with ordered precipitation strengthening phase and dynamic slip band refinement

L. L. Wei et al.

Summary: This article investigates the mechanical behavior of Fe-27Mn-9Al-1C austenitic steel microalloyed with Nb, specifically focusing on its work hardening behavior and plasticity mechanisms. The study reveals that pronounced planar dislocation slip occurs during plastic deformation, and the shearing of precipitates and refinement of slip bands contribute to strain hardening of the steel. Annealing twin boundaries act as dislocation sources, promoting further subdivision of slip bands and suppressing strain localization.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2022)

Add to Collection

Article Chemistry, Physical

Alloy Partitioning Effect on Strength and Toughness of κ-Carbide Strengthened Steels

Daniel M. Field et al.

Summary: Alloy partitioning during heat treatment in a lightweight precipitation hardened steel was investigated using transmission electron microscopy and atom probe tomography. The mechanical properties are discussed as a function of the effect of solution treatment temperature and aging time, giving rise to variations in chemical modulation.

MATERIALS (2022)

Add to Collection

Review Materials Science, Multidisciplinary

Effect of Micro-Alloyed/Alloyed Elements on Microstructure and Properties of Fe-Mn-Al-C Lightweight Steel

Xiqiang Ren et al.

Summary: This article reviews the research progress of lightweight automobile steel in the automotive manufacturing industry. Specifically, the effects of micro-alloyed/alloyed elements on the microstructure, properties, and kappa-carbide of Fe-Mn-Al-C lightweight steel are discussed. The authors summarize the main ways to improve the properties of lightweight steel by adding these elements and analyze the existing problems, providing a reference for future research.

METALS (2022)

Add to Collection

Article Nanoscience & Nanotechnology

Strain hardening and stored energy in high-Mn austenitic based low-density steel

Bidyapati Mishra et al.

Summary: This study investigates the high strain hardening and energy storage mechanism in austenitic low-density steel through full field measurements of temperature and strain. The results show that high energy storage is attributed to the interaction between dislocation groups in different slip bands and the destruction of short-range order clusters. The elastic stress field of slip bands is influenced by this interaction. Furthermore, weak deformation heterogeneity occurs after yield and persists throughout the deformation process, resulting in microstructural heterogeneity in the form of micro-bands and nano twins.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2022)

Add to Collection

Article Materials Science, Multidisciplinary

Microstructural study of microbands in a Fe-30Mn-6.5Al-0.3C low-density steel deformed at cryogenic temperature by combined electron channeling contrast imaging and electron backscatter diffraction

I. Gutierrez-Urrutia et al.

Summary: In this study, the microstructural characteristics of the microband structure in low-density steel deformed at low temperatures were investigated. The nucleation mechanisms and grain-orientation dependence of the microband structure were analyzed, providing insight into the deformation behavior of the steel at cryogenic temperatures.

ACTA MATERIALIA (2022)

Add to Collection

Article Materials Science, Multidisciplinary

Ultra-high strength medium-Mn lightweight steel by dislocation slip band refinement and suppressed intergranular ?-carbide with Cr addition

Mingxiang Liu et al.

Summary: An ultra-high strength lightweight steel has been developed in this study, with improved ductility and strain hardening ability through the addition of Cr element. By carefully controlling alloy composition and processing methods, the steel achieved high elongation, yield and tensile strength of around 1.5 GPa, meeting the requirements of ultra-high strength and lightweight in automotive applications.

MATERIALS CHARACTERIZATION (2022)

Add to Collection

Article Crystallography

Effect of κ Carbides on Deformation Behavior of Fe-27Mn-10Al-1C Low Density Steel

Siyuan Li et al.

Summary: Fe-Mn-Al-C steel, a potential lightweight material for automobiles, exhibited excellent mechanical properties and continuous high strain hardening rate when quenched, due to the uniform distribution of nanoscale kappa carbides in the austenite matrix.

CRYSTALS (2022)

Add to Collection

Article Nanoscience & Nanotechnology

Achieving better synergy of strength and ductility by adjusting size and volume fraction of coherent Κ'-carbides in a lightweight steel

Jian Wang et al.

Summary: Heterogeneous grain structures with dual-nanoprecipitates are designed and fabricated in a lightweight steel. Aging treatment increases the size and volume fraction of coherent Kappa'-carbides, resulting in better tensile properties due to higher hetero-deformation-induced hardening and density of induced dislocations. Two distinct precipitation hardening mechanisms are revealed, and high density of stacking faults and nanotwins contribute to strain hardening in aged samples.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2022)

Add to Collection

Article Nanoscience & Nanotechnology

Effect of S addition on mechanical and machinability properties in austenitic Fe-Mn-Al-C lightweight steels

Hyungkwon Park et al.

Summary: This study investigates the machinability of austenitic LWS and the impact of MnS formation on its mechanical and machinability properties. The research finds that the number and area fraction of MnS inclusions increase linearly with the increase of S content, while the size of inclusions first increases rapidly and then slows down. The tensile properties remain unchanged regardless of the S content, but the impact energy deteriorates linearly with the increase of S content. Additionally, the formation of MnS inclusions significantly improves the machinability of LWS by acting as sites of mechanical stress concentration and generating thermal cavity and pores during machining.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2022)

Add to Collection

Review Materials Science, Multidisciplinary

Austenite-Based Fe-Mn-Al-C Lightweight Steels: Research and Prospective

Hua Ding et al.

Summary: Fe-Mn-Al-C lightweight steels have been intensively investigated, and different types of steels with excellent mechanical properties have been discovered. The addition of Al and high C content significantly affects the microstructures and mechanical properties of the lightweight steels. Due to their high stacking fault energies, the microstructural evolution, strengthening mechanisms, and deformation behaviors of these steels differ from those of conventional steels. The relationship between the microstructures and mechanical properties has been widely studied, and several deformation mechanisms have been proposed.

METALS (2022)

Add to Collection

Article Materials Science, Multidisciplinary

Hydrogen-assisted decohesion associated with nanosized grain boundary κ-carbides in a high-Mn lightweight steel

Mohamed Naguib Elkot et al.

Summary: This study focuses on the hydrogen embrittlement behavior induced by kappa-carbide precipitation in high-Mn and high-Al lightweight steels. The presence of nanosized grain boundary kappa-carbides at early stages of aging is observed, and this phenomenon is correlated with the deterioration of hydrogen embrittlement resistance. The facile hydrogen-induced decohesion of grain boundary kappa-carbide/matrix interfaces is proposed as the mechanism for intergranular fracture. Other plasticity-associated hydrogen embrittlement mechanisms are also discussed, and possible alloying and microstructure design strategies for enhancing hydrogen embrittlement resistance are suggested.

ACTA MATERIALIA (2022)

Add to Collection

Review Metallurgy & Metallurgical Engineering

Low Density Fe-Mn-Al-C Steels: Phase Structures, Mechanisms and Properties

Ivan Gutierrez-Urrutia

Summary: This review introduces the structural phases, microstructural characteristics, and properties of low density Fe-Mn-Al-C steels, highlighting their potential applications in lightweight car body structures and cryogenic industry. It also discusses the latest alloy design strategies and future challenges for establishing these steels as structural materials for industrial applications.

ISIJ INTERNATIONAL (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Stacking Fault Energy Determination in Fe-Mn-Al-C Austenitic Steels by X-ray Diffraction

Jaime A. Castaneda et al.

Summary: A critical assessment was conducted to determine the stacking fault energy (SFE) of the austenite phase in high manganese steels using X-ray diffraction (XRD), revealing a substantial variation in SFE with chosen elastic constants, leading to potential errors of up to 37%. The study aimed to establish a more direct and reliable methodology for calculating SFE by XRD, and found that uncertainty in elastic constants can significantly impact the estimated values.

METALS (2021)

Add to Collection

Article Nanoscience & Nanotechnology

Revisiting the formation mechanism of intragranular κ-carbide in austenite of a Fe-Mn-Al-Cr-C low-density steel

Jianlei Zhang et al.

Summary: The formation of intragranular kappa-carbide in gamma-austenite is found to occur directly in the disordered state, rather than through spinodal decomposition-ordering mechanism. This is due to the similar lattice structure, same composition, and complete coherency between the gamma-austenite matrix and kappa-carbides.

SCRIPTA MATERIALIA (2021)

Add to Collection

Article Materials Science, Multidisciplinary

The high temperature deformation behavior of a triplex (ferrite plus austenite plus martensite) low density steel

Amir-Reza Kalantari et al.

Summary: This study investigates the high temperature deformation behavior of Fe-11.15Mn-5.6Al-0.07C lightweight steel, with a focus on the occurrence of flow softening mechanisms such as dynamic strain induced transformation and dynamic recrystallization. By developing a constitutive model that considers the three dimensional variation of materials' constants, the strain compensation mechanisms were accurately assessed. The activation energy maps and Q-plots provided insights into the microstructural evolutions and highlighted the effectiveness of load transition and high dislocation annihilation rate in high temperature flow behavior of the steel.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2021)

Add to Collection

Article Materials Science, Multidisciplinary

γ Decomposition in Fe-Mn-Al-C lightweight steels

C. Mapelli et al.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2020)

Add to Collection

Review Materials Science, Multidisciplinary

The κ-Carbides in Low-Density Fe-Mn-Al-C Steels: A Review on Their Structure, Precipitation and Deformation Mechanism

Peng Chen et al.

METALS (2020)

Add to Collection

Article Materials Science, Multidisciplinary

Characterization of microstructural evolution in austenitic Fe-Mn-Al-C lightweight steels with Cr content

Kyeong-Won Kim et al.

MATERIALS CHARACTERIZATION (2020)

Add to Collection

Article Materials Science, Multidisciplinary

Current Challenges and Opportunities in Microstructure-Related Properties of Advanced High-Strength Steels

Dierk Raabe et al.

METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2020)

Add to Collection

Article Materials Science, Multidisciplinary

Aging hardening and precipitation behavior of Fe-31.6Mn-8.8Al-1.38C austenitic cast steel

Yifan Feng et al.

VACUUM (2020)

Add to Collection

Article Chemistry, Physical

Partitioning of C into κ-carbides by Si addition and its effect on the initial deformation mechanism of Fe-Mn-Al-C lightweight steels

C. W. Kim et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2019)

Add to Collection

Article Nanoscience & Nanotechnology

Microstructure evolution and room temperature mechanical properties of a thermomechanically processed ferrite-based low density steel

Amir-Reza Kalantari et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)

Add to Collection

Article Chemistry, Physical

A New Explanation for the Effect of Dynamic Strain Aging on Negative Strain Rate Sensitivity in Fe-30Mn-9Al-1C Steel

Jia Xing et al.

MATERIALS (2019)

Add to Collection

Article Materials Science, Multidisciplinary

Effect of Mn and C on Age Hardening of Fe-Mn-Al-C Lightweight Steels

Sung-Won Park et al.

METALS AND MATERIALS INTERNATIONAL (2019)

Add to Collection

Review Materials Science, Multidisciplinary

A general perspective of Fe-Mn-Al-C steels

O. A. Zambrano

JOURNAL OF MATERIALS SCIENCE (2018)

Add to Collection

Article Materials Science, Multidisciplinary

Effect of Aging Isothermal Time on the Microstructure and Room-Temperature Impact Toughness of Fe-24.8Mn-7.3Al-1.2C Austenitic Steel with kappa-Carbides Precipitation

Yifan Feng et al.

METALS AND MATERIALS INTERNATIONAL (2018)

Add to Collection

Article Materials Science, Multidisciplinary

An Atom Probe Study of κ-carbide Precipitation in Austenitic Lightweight Steel and the Effect of Phosphorus

L. N. Bartlett et al.

METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2017)

Add to Collection

Review Materials Science, Multidisciplinary

Current state of Fe-Mn-Al-C low density steels

Shangping Chen et al.

PROGRESS IN MATERIALS SCIENCE (2017)

Add to Collection

Article Materials Science, Multidisciplinary

Strengthening and strain hardening mechanisms in a precipitation-hardened high-Mn lightweight steel

M. J. Yao et al.

ACTA MATERIALIA (2017)

Add to Collection

Article Materials Science, Multidisciplinary

Strain hardening by dynamic slip band refinement in a high-Mn lightweight steel

E. Welsch et al.

ACTA MATERIALIA (2016)

Add to Collection

Article Engineering, Mechanical

Stacking Fault Energy Maps of Fe-Mn-Al-C-Si Steels: Effect of Temperature, Grain Size, and Variations in Compositions

O. A. Zambrano

JOURNAL OF ENGINEERING MATERIALS AND TECHNOLOGY-TRANSACTIONS OF THE ASME (2016)

Add to Collection

Article Nanoscience & Nanotechnology

β-Mn formation and aging effect on the fracture behavior of high-Mn low-density steels

Keunho Lee et al.

SCRIPTA MATERIALIA (2016)

Add to Collection

Article Nanoscience & Nanotechnology

Phase transformation of the L12 phase to kappa-carbide after spinodal decomposition and ordering in an Fe-C-Mn-Al austenitic steel

Wei-Chun Cheng et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2015)

Add to Collection

Article Chemistry, Physical

Deformation mechanisms in ultrahigh-strength and high-ductility nanostructured FeMnAlC alloy

Chih-Lung Lin et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2014)

Add to Collection

Article Materials Science, Multidisciplinary

High strength and ductile low density austenitic FeMnAlC steels: Simplex and alloys strengthened by nanoscale ordered carbides

I. Gutierrez-Urrutia et al.

MATERIALS SCIENCE AND TECHNOLOGY (2014)

Add to Collection

Article Materials Science, Multidisciplinary

An Atom Probe Study of Kappa Carbide Precipitation and the Effect of Silicon Addition

Laura N. Bartlett et al.

METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2014)

Add to Collection

Article Metallurgy & Metallurgical Engineering

Control of Strain Hardening Behavior in High-Mn Austenitic Steels

Wenwen Song et al.

ACTA METALLURGICA SINICA-ENGLISH LETTERS (2014)

Add to Collection

Article Chemistry, Physical

Isothermal precipitation behavior of κ-carbide in the Fe-9Mn-6Al-0.15C lightweight steel with a multiphase microstructure

Junyeong Jeong et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2013)

Add to Collection

Article Materials Science, Multidisciplinary

Fe-Al-Mn-C lightweight structural alloys: a review on the microstructures and mechanical properties

Hansoo Kim et al.

SCIENCE AND TECHNOLOGY OF ADVANCED MATERIALS (2013)

Add to Collection

Article Nanoscience & Nanotechnology

Tensile deformation of low-density Fe-Mn-Al-C austenitic steels at ambient temperature

Kyung-Tae Park

SCRIPTA MATERIALIA (2013)

Add to Collection

Article Nanoscience & Nanotechnology

Influence of Al content and precipitation state on the mechanical behavior of austenitic high-Mn low-density steels

I. Gutierrez-Urrutia et al.

SCRIPTA MATERIALIA (2013)

Add to Collection

Article Materials Science, Multidisciplinary

Rapid alloy prototyping: Compositional and thermo-mechanical high throughput bulk combinatorial design of structural materials based on the example of 30Mn-1.2C-xAl triplex steels

H. Springer et al.

ACTA MATERIALIA (2012)

Add to Collection

Article Nanoscience & Nanotechnology

Effect of aging on the microstructure and deformation behavior of austenite base lightweight Fe-28Mn-9Al-0.8C steel

Kayoung Choi et al.

SCRIPTA MATERIALIA (2010)

Add to Collection

Article Nanoscience & Nanotechnology

Microband-induced plasticity in a high Mn-Al-C light steel

Je Doo Yoo et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2008)

Add to Collection

Article Materials Science, Multidisciplinary

Grain boundary precipitation in Fe-30Mn-9Al-5Cr-0.7C alloy

Yi Hsuan Tuan et al.

MATERIALS TRANSACTIONS (2008)

Add to Collection

Article Materials Science, Multidisciplinary

The role of annealing twins during recrystallization of Cu

D. P. Field et al.

ACTA MATERIALIA (2007)

Add to Collection

Article Metallurgy & Metallurgical Engineering

Diagram of phase transformations in the austenite of hardened alloy Fe-28% Mn-8.5% Al-1% C-1.25% Si as a result of aging due to isothermal heating

O. Acselrad et al.

METAL SCIENCE AND HEAT TREATMENT (2006)

Add to Collection

Article Metallurgy & Metallurgical Engineering

Microstructures and mechanical properties of high-strength Fe-Mn-Al-C light-weight TRIPLEX steels

Georg Frommeyer et al.

STEEL RESEARCH INTERNATIONAL (2006)

Add to Collection

Article Materials Science, Multidisciplinary

Room-temperature cleavage fracture of FeMnAIC steels

O Acselrad et al.

METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2004)

Add to Collection

Article Engineering, Mechanical

A first evaluation of the abrasive wear of an austenitic FeMnAlC steel

O Acselrad et al.

WEAR (2004)

Add to Collection

Article Engineering, Industrial

Heat treatment and thermal stability of FeMnAlC alloys

IS Kalashnikov et al.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2003)

Add to Collection

Article Materials Science, Multidisciplinary

Phase transformations in FeMnAlC austenitic steels with Si addition

O Acselrad et al.

METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2002)

Add to Collection

Article Materials Science, Multidisciplinary

Effects of Mn contents on the microstructure and mechanical properties of the Fe-10Al-xMn-1.0C alloy

CY Chao et al.

MATERIALS TRANSACTIONS (2002)

Add to Collection

© Peeref 2019-2024. All rights reserved.