Related references
Note: Only part of the references are listed.Mechanical properties and energy absorption capabilities of aluminium foam sandwich structure subjected to low-velocity impact
Ying Zhao et al.
CONSTRUCTION AND BUILDING MATERIALS (2021)
Effects of porosity gradient pattern on mechanical performance of additive manufactured Ti-6Al-4V functionally graded porous structure
Yinze Xiong et al.
MATERIALS & DESIGN (2021)
Improvement in energy absorption properties of aluminum foams by designing pore-density distribution
Fateme Hassanli et al.
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2021)
Characteristics, applications and processing of aluminium foams - A Review
J. Dineshkumar et al.
MATERIALS TODAY-PROCEEDINGS (2021)
Biaxial mechanical behavior of closed-cell aluminum foam under combined shear-compression loading
Zhi-bin Li et al.
TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA (2020)
Characterization of initial and subsequent yield behaviors of closed-cell aluminum foams under multiaxial loadings
Erdong Wang et al.
COMPOSITES PART B-ENGINEERING (2020)
Sample size effect on the mechanical behavior of aluminum foam
Yue Zhang et al.
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2019)
Compressive mechanical property of a new three-dimensional aluminum based double-V lattice structure
Yingying Xue et al.
MATERIALS LETTERS (2019)
A survey of fabrication and application of metallic foams (1925-2017)
Shweta Singh et al.
JOURNAL OF POROUS MATERIALS (2018)
Influence of particle diameter in mechanical performance of Al expanded clay syntactic foams
H. Puga et al.
COMPOSITE STRUCTURES (2018)
A review on functionally graded structures and materials for energy absorption
Fengxiang Xu et al.
ENGINEERING STRUCTURES (2018)
Investigations on the yield behavior of metal foam under multiaxial loadings by an imaged-based mesoscopic model
Geng Luo et al.
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2018)
Application of Aluminium Flakes in Fabrication of Open-Cell Aluminium Foams by Space Holder Method
Ioannis G. Papantoniou et al.
MATERIALS (2018)
Mass-scale processing of open-cell metallic foams by pressurized casting method
B. Soni et al.
JOURNAL OF POROUS MATERIALS (2017)
A replication-casting device for manufacturing open-cell Mg foams
G. A. Lara-Rodriguez et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2017)
Fabrication and Characterization of an Innovative Heat Exchanger with Open Cell Aluminum Foams
Stefano Guarino et al.
2017 2ND INTERNATIONAL CONFERENCE ON ADVANCES ON CLEAN ENERGY RESEARCH (ICACER 2017) (2017)
Strain-rate effects in Ni/Al composite metal foams from quasi-static to low-velocity impact behaviour
A. Jung et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2016)
On the energy absorption of tube reinforced foam materials under quasi-static and dynamic compression
D. Karagiozova et al.
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2016)
Uniaxial and biaxial failure behaviors of aluminum alloy foams
Zhiwei Zhou et al.
COMPOSITES PART B-ENGINEERING (2014)
Compressive properties of closed-cell aluminum foams with different contents of ceramic microspheres
Xingchuan Xia et al.
MATERIALS & DESIGN (2014)
Compressive properties of aluminum foam produced by powder-Carbamide spacer route
Hasan Bafti et al.
MATERIALS & DESIGN (2013)
Deformation and failure behaviour of open cell Al foams under quasistatic and impact loading
Paul Schueler et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2013)
Multiaxial yield behaviour of Al replicated foam
E. Combaz et al.
JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS (2011)
The microstructural origin of strain hardening in two-dimensional open-cell metal foams
K. R. Mangipudi et al.
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2010)
Compressive property and energy absorption characteristic of open-cell SiCp/AlSi9Mg composite foams
Yanru Luo et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2010)
Aluminum foam-polymer hybrid structures (APM aluminum foam) in compression testing
Karsten Stoebener et al.
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2008)
Dynamic biaxial plastic buckling of circular shells
A. Abdul-Latif et al.
JOURNAL OF APPLIED MECHANICS-TRANSACTIONS OF THE ASME (2008)
Elaboration and characterization of metallic foams based on tin-lead
Abd-Elmouneim Belhadj et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2008)
Mechanical properties of a density-graded replicated aluminum foam
Alan H. Brothers et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2008)
On the plastic collapse stress of open-cell aluminum foam
E. Amsterdam et al.
SCRIPTA MATERIALIA (2008)
Mechanical and physical characterization of copper foam
Medhat Awad El-Hadek et al.
International Journal of Mechanics and Materials in Design (2008)
Spherical pore replicated microcellular aluminium: Processing and influence on properties
Russell Goodall et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2007)
Influence of the infiltration pressure on the structure and properties of replicated aluminium foams
J. F. Despois et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2007)
Quasi-static biaxial plastic buckling of tubular structures used as an energy absorber
R. Baleh et al.
JOURNAL OF APPLIED MECHANICS-TRANSACTIONS OF THE ASME (2007)
Mechanical properties of open-pore titanium foam
Thomas Imwinkelried
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART A (2007)
Metal foams for structural applications: design and manufacturing
M. Barletta et al.
INTERNATIONAL JOURNAL OF COMPUTER INTEGRATED MANUFACTURING (2007)
Effect of pore size and relative density on the mechanical properties of open cell aluminum foams
Jiang Bin et al.
SCRIPTA MATERIALIA (2007)
Replication processing of highly porous materials
Yves Conde et al.
ADVANCED ENGINEERING MATERIALS (2006)
Effects of cell size on compressive properties of aluminum foam
XQ Cao et al.
TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA (2006)
Studies on the dynamic compressive properties of open-cell aluminum alloy foams
ZH Wang et al.
SCRIPTA MATERIALIA (2006)
The effect of structural defects on the compressive behavior of closed-cell Al foam
I Jeon et al.
ACTA MATERIALIA (2005)
Permeability of open-pore microcellular materials
JF Despois et al.
ACTA MATERIALIA (2005)
Compressibility of porous magnesium foam: dependency on porosity and pore size
CE Wen et al.
MATERIALS LETTERS (2004)
Compressive strength of aluminium foams
E Koza et al.
MATERIALS LETTERS (2004)
Dependency of densification properties on cell topology of metal foams
KC Chan et al.
SCRIPTA MATERIALIA (2003)
Acoustic absorption behaviour of an open-celled aluminium foam
FS Han et al.
JOURNAL OF PHYSICS D-APPLIED PHYSICS (2003)
Experimental studies on the yield behavior of ductile and brittle aluminum foams
M Doyoyo et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2003)
Fracture behaviour and fracture toughness of ductile closed-cell metallic foams
C Motz et al.
ACTA MATERIALIA (2002)
Processing and mechanical properties of autogenous titanium implant materials
CE Wen et al.
JOURNAL OF MATERIALS SCIENCE-MATERIALS IN MEDICINE (2002)
Validation of constitutive models applicable to aluminium foams
AG Hanssen et al.
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2002)
Ductile fracture of two-dimensional cellular structures
I Schmidt et al.
INTERNATIONAL JOURNAL OF FRACTURE (2001)
The effect of cell wall microstructure on the deformation and fracture of aluminium-based foams
AE Markaki et al.
ACTA MATERIALIA (2001)
Deformation and fracture of aluminium foams
OB Olurin et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2000)
Mechanical properties and non-homogeneous deformation of open-cell nickel foams: application of the mechanics of cellular solids and of porous materials
X Badiche et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2000)
High-strength aluminum alloys containing nanoquasicrystalline particles
A Inoue et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2000)
Effect of cell morphology on the compressive properties of open-cell aluminum foams
TG Nieh et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2000)
Strain rate sensitivity of a closed-cell aluminum foam
A Paul et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2000)
Share Paper
