Related references
Note: Only part of the references are listed.Sample-efficient parameter exploration of the powder film drying process using experiment-based Bayesian optimization
Kohei Nagai et al.
SCIENTIFIC REPORTS (2022)
Towards an instant structure-property prediction quality control tool for additive manufactured steel using a crystal plasticity trained deep learning surrogate
Yuhui Tu et al.
MATERIALS & DESIGN (2022)
Powder Bed Fusion of nickel-based superalloys: A review
Salome Sanchez et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2021)
A new ray tracing heat source model for mesoscale CFD simulation of selective laser melting (SLM)
Binqi Liu et al.
APPLIED MATHEMATICAL MODELLING (2020)
Stability of a Melt Pool during 3D-Printing of an Unsupported Steel Component and Its Influence on Roughness
Mateusz Skalon et al.
MATERIALS (2020)
Real-Time Observation of Melt Pool in Selective Laser Melting: Spatial, Temporal, and Wavelength Resolution Criteria
Luca Mazzoleni et al.
IEEE TRANSACTIONS ON INSTRUMENTATION AND MEASUREMENT (2020)
Identification and characterization of spatter particles and their effect on surface roughness, density and mechanical response of 17-4 PH stainless steel laser powder-bed fusion parts
Usman Ali et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)
The investigation of plume and spatter signatures on melted states in selective laser melting
Dongsen Ye et al.
OPTICS AND LASER TECHNOLOGY (2019)
Dynamics of pore formation during laser powder bed fusion additive manufacturing
Aiden A. Martin et al.
NATURE COMMUNICATIONS (2019)
Microstructure of selective laser melted AlSi10Mg alloy
Xihe Liu et al.
MATERIALS & DESIGN (2019)
Microstructure formed during selective laser melting of IN738LC in keyhole mode
T. Guraya et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2019)
Effects of sulfur concentration and Marangoni convection on melt-pool formation in transition mode of selective laser melting process
Trong-Nhan Le et al.
MATERIALS & DESIGN (2019)
Experimental analysis of spatter generation and melt-pool behavior during the powder bed laser beam melting process
V. Gunenthiram et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2018)
Solidification pattern, microstructure and texture development in Laser Powder Bed Fusion (LPBF) of Al10SiMg alloy
Hong Qin et al.
MATERIALS CHARACTERIZATION (2018)
Effects of scan speed on vapor plume behavior and spatter generation in laser powder bed fusion additive manufacturing
Hang Zheng et al.
JOURNAL OF MANUFACTURING PROCESSES (2018)
Selective laser melting of AlSi10Mg: Effects of scan direction, part placement and inert gas flow velocity on tensile strength
Ahmad Bin Anwar et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2017)
Process defects and in situ monitoring methods in metal powder bed fusion: a review
Marco Grasso et al.
MEASUREMENT SCIENCE AND TECHNOLOGY (2017)
Mechanisms and characteristics of spatter generation in SLM processing and its effect on the properties
Di Wang et al.
MATERIALS & DESIGN (2017)
Selective laser melting of Al7050 powder: Melting mode transition and comparison of the characteristics between the keyhole and conduction mode
Ting Qi et al.
MATERIALS & DESIGN (2017)
Real-time monitoring of laser powder bed fusion process using high-speed X-ray imaging and diffraction
Cang Zhao et al.
SCIENTIFIC REPORTS (2017)
Metal vapor micro-jet controls material redistribution in laser powder bed fusion additive manufacturing
Sonny Ly et al.
SCIENTIFIC REPORTS (2017)
Denudation of metal powder layers in laser powder bed fusion processes
Manyalibo J. Matthews et al.
ACTA MATERIALIA (2016)
Influence of thermodynamics within molten pool on migration and distribution state of reinforcement during selective laser melting of AlN/AlSi 10Mg composites
Donghua Dai et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2016)
On the formation of A1Si10Mg single tracks and layers in selective laser melting: Microstructure and nano-mechanical properties
Nesma T. Aboulkhair et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2016)
Review of in-situ process monitoring and in-situ metrology for metal additive manufacturing
Sarah K. Everton et al.
MATERIALS & DESIGN (2016)
A Study on the Laser Spatter and the Oxidation Reactions During Selective Laser Melting of 316L Stainless Steel, Al-Si10-Mg, and Ti-6Al-4V
Marco Simonelli et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2015)
Laser powder bed fusion additive manufacturing of metals; physics, computational, and materials challenges
W. E. King et al.
APPLIED PHYSICS REVIEWS (2015)
Observation of keyhole-mode laser melting in laser powder-bed fusion additive manufacturing
Wayne E. King et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2014)
Mesoscopic simulation model of selective laser melting of stainless steel powder
Saad A. Khairallah et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2014)
Use of track/layer morphology to develop functional parts by selective laser melting
I. Yadroitsev et al.
JOURNAL OF LASER APPLICATIONS (2013)
Laser additive manufacturing of metallic components: materials, processes and mechanisms
D. D. Gu et al.
INTERNATIONAL MATERIALS REVIEWS (2012)
Heat transfer modelling and stability analysis of selective laser melting
A. V. Gusarov et al.
APPLIED SURFACE SCIENCE (2007)
Share Paper
