☆ 4.7 Article

Integrated modelling and simulation of NiTi alloy by powder bed fusion: Single track study

MATERIALS & DESIGN (2023)

Related references

Note: Only part of the references are listed.

Article Materials Science, Multidisciplinary

Multiscale simulation of powder-bed fusion processing of metallic alloys

S. M. Elahi et al.

Summary: We present a computational framework for simulating powder-bed fusion of metallic alloys, incorporating CalPhaD calculations, macroscale finite element thermal simulations, and microscopic phase-field simulations. With this framework, we simulated the selective laser melting of an Inconel 718 alloy and analyzed the effects of temperature-dependent properties and differences between the powder bed and the dense material. Microscale simulations provided new insights into grain texture selection under realistic selective laser melting conditions.

COMPUTATIONAL MATERIALS SCIENCE (2022)

Add to Collection

Article Materials Science, Multidisciplinary

Controlling microstructure evolution and phase transformation behavior in additive manufacturing of nitinol shape memory alloys by tuning hatch distance

Jia-Ning Zhu et al.

Summary: The effect of hatch distance on microstructure and functional properties of L-PBF NiTi shape memory alloys is investigated. It is found that the phase transformation temperatures do not decrease proportionally with hatch distance, but rather relate to a critical value. Below this critical value, epitaxial grain growth and in situ recrystallization are enhanced, while above, irregular grains and decreased dislocations are formed. However, the critical value exhibits high dislocation density and fine grain size, resulting in superior thermal cyclic stability.

JOURNAL OF MATERIALS SCIENCE (2022)

Add to Collection

Article Materials Science, Multidisciplinary

Absorbance study of powder conditions for laser additive manufacturing

Benedikt Brandau et al.

Summary: This study determines the absorbance of 39 metal powders for additive manufacturing at various laser wavelengths. The results show the changes in absorbance for different materials and wavelengths, providing important information for simulations and validations of process parameters in powder-based laser materials processing.

MATERIALS & DESIGN (2022)

Add to Collection

Article Multidisciplinary Sciences

Keyhole fluctuation and pore formation mechanisms during laser powder bed fusion additive manufacturing

Yuze Huang et al.

Summary: This study reveals the behavior and evolution mechanisms of keyhole and bubble in laser powder-bed fusion (LPBF) using synchrotron X-ray imaging. The findings provide guidance for the development of control systems to reduce porosity.

NATURE COMMUNICATIONS (2022)

Add to Collection

Article Engineering, Manufacturing

Scanning strategy induced cracking and anisotropic weakening in grain texture of additively manufactured superalloys

Marcus C. Lam et al.

Summary: Using a multiphysics process model, this study explains the correlation between cracking and anisotropic texture weakening in a Ni-based superalloy produced by laser powder bed fusion. The findings suggest that the cracking susceptibility is related to a specific kind of texture weakening, which reduces grain texture and generates crack-prone high-angle grain boundaries. Computational simulations support the observation that texture weakening originates from the non-epitaxial solidification region with excessively scattered thermal gradient vectors. The results highlight the importance of considering scanning vector arrangements to suppress cracking in laser powder bed fusion processes for superalloys.

ADDITIVE MANUFACTURING (2022)

Add to Collection

Review Engineering, Manufacturing

Understanding laser-metal interaction in selective laser melting additive manufacturing through numerical modelling and simulation: a review

Abdelkrim Bouabbou et al.

Summary: Selective laser melting (SLM) is a widely used and versatile technique for additive manufacturing of metallic parts. This review focuses on the interaction between laser and metal powders, highlighting the advancements in powder-scale modeling and simulation, as well as the generation of virtual powder beds and multi-physics computations. The use of meta-modeling and machine learning for process optimization is critically discussed.

VIRTUAL AND PHYSICAL PROTOTYPING (2022)

Add to Collection

Article Engineering, Manufacturing

Formation of keyhole and lack of fusion pores during the laser powder bed fusion process

Subin Shrestha et al.

Summary: This study investigates the formation of pores during the laser powder bed fusion process using different energy densities. The results show that an increase in energy density leads to an increase in keyhole porosity, while a decrease in energy density leads to an increase in lack of fusion porosity.

MANUFACTURING LETTERS (2022)

Add to Collection

Article Engineering, Manufacturing

Influence of laser shock peening on the residual stresses in additively manufactured 316L by Laser Powder Bed Fusion: A combined experimental-numerical study

Paul Sandmann et al.

Summary: This study demonstrates that laser shock peening (LSP) technology can effectively improve the residual stress state of components manufactured by laser powder bed fusion (LPBF), while traditional heat treatments may not completely eliminate these detrimental stresses. Experimental results show that LSP can convert the surface tensile stresses of LPBF components into beneficial compressive residual stresses.

ADDITIVE MANUFACTURING (2022)

Add to Collection

Article Engineering, Manufacturing

Investigation of molten pool and heat transfer mechanisms after moving annular laser incidence metal by lattice Boltzmann method

Junyong Shen et al.

Summary: This study develops a double distribution LB model based on the lattice Boltzmann method to investigate the interaction between annular laser and material. The model is verified and compared with different considerations of temperature-related thermal conductivity. It is found that the inner and outer annular radii significantly affect the flow pattern and molten pool depth.

JOURNAL OF MANUFACTURING PROCESSES (2022)

Add to Collection

Article Engineering, Manufacturing

Microstructure and mechanical properties of AlSi10Mg alloy built by laser powder bed fusion/direct energy deposition hybrid laser additive manufacturing

Jianqiang Gong et al.

Summary: This paper investigates the application of LPBF/DED hybrid laser additive manufacturing technology in the manufacturing of aluminum alloy components. The results show that there are no obvious defects at the LPBF/DED interface, but the microstructure around the interface changes significantly. The LPBF zone has higher microhardness and tensile strength, while the DED zone has better elongation. The tensile strength of the LPBF/DED interface is not lower than the DED zone. The findings have important implications for understanding and applying LPBF/DED hybrid laser additive manufacturing technology.

ADDITIVE MANUFACTURING (2022)

Add to Collection

Review Materials Science, Multidisciplinary

Additive manufacturing of shape memory alloys: A review with emphasis on powder bed systems

Ali N. Alagha et al.

Summary: This study provides a comprehensive review of additive manufacturing applied to various SMA systems, focusing on the influence of process parameters and heat treatment on the microstructure, printability, and structural and functional behavior of additively fabricated samples.

MATERIALS & DESIGN (2021)

Add to Collection

Article Chemistry, Physical

Selective Laser Melting of Pre-Alloyed NiTi Powder: Single-Track Study and FE Modeling with Heat Source Calibration

Stanislav V. Chernyshikhin et al.

Summary: Nickel-titanium shape-memory alloys have unique functional properties that enable various applications, and selective laser melting allows for low-cost customization and manufacturing of complex geometries. Optimization of process parameters is crucial for maintaining high mass density and functional properties.

MATERIALS (2021)

Add to Collection

Article Engineering, Manufacturing

Micromechanical modeling approach to single track deformation, phase transformation and residual stress evolution during selective laser melting using crystal plasticity

Matti Lindroos et al.

Summary: The study presents a thermomechanical crystal plasticity model for analyzing microscale evolution and residual stress and strain in a single track event of selective laser melting. The model is effective in addressing material properties and complex performance dependent on microstructure scale phenomena.

ADDITIVE MANUFACTURING (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Optimizing the cellular automata finite element model for additive manufacturing to simulate large microstructures

Kirubel Teferra et al.

Summary: This study introduces the implementation of the cellular automata finite element (CAFE) model for simulating the solidification of additively manufactured materials. The proposed separation of temporal scales improves the computational efficiency and scalability of the model, leading to more accurate simulations of polycrystalline microstructures. The model is validated for 316L stainless steel and further evaluated for different scan patterns to assess their effects on microstructural features.

ACTA MATERIALIA (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Analytical model for the depth progress of percussion drilling with ultrashort laser pulses

Daniel Holder et al.

Summary: A simplified analytical model is presented to predict the depth progress and final hole depth obtained by laser percussion drilling in metals with ultrashort laser pulses. Experimental validation confirms the accuracy of the model for percussion drilling in stainless steel with picosecond pulses.

APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING (2021)

Add to Collection

Article Chemistry, Physical

Phase-field modeling of grain evolutions in additive manufacturing from nucleation, growth, to coarsening

Min Yang et al.

Summary: A three-dimensional phase-field model was developed to simulate grain evolutions during powder-bed-fusion additive manufacturing, incorporating a physically-informed temperature profile. Validation experiments showed consistent simulation results with experimental data, including the preliminary verification of grain refinement by adding nanoparticles.

NPJ COMPUTATIONAL MATERIALS (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Depth Dependence and Keyhole Stability at Threshold, for Different Laser Welding Regimes

Remy Fabbro

APPLIED SCIENCES-BASEL (2020)

Add to Collection

Article Materials Science, Multidisciplinary

Spattering and denudation in laser powder bed fusion process: Multiphase flow modelling

Hui Chen et al.

ACTA MATERIALIA (2020)

Add to Collection

Article Multidisciplinary Sciences

Critical instability at moving keyhole tip generates porosity in laser melting

Cang Zhao et al.

SCIENCE (2020)

Add to Collection

Article Engineering, Manufacturing

Types of spatter and their features and formation mechanisms in laser powder bed fusion additive manufacturing process

Zachary A. Young et al.

ADDITIVE MANUFACTURING (2020)

Add to Collection

Article Materials Science, Multidisciplinary

Correlation between the spatters and evaporation vapor on the front keyhole wall during fiber laser keyhole welding

Gaolei Zhang et al.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2020)

Add to Collection

Article Thermodynamics

Surface tension of liquid nickel: Re-evaluated and revised data

Anna Werkovits et al.

HIGH TEMPERATURES-HIGH PRESSURES (2020)

Add to Collection

Article Multidisciplinary Sciences

Keyhole threshold and morphology in laser melting revealed by ultrahigh-speed x-ray imaging

Ross Cunningham et al.

SCIENCE (2019)

Add to Collection

Article Materials Science, Multidisciplinary

A cellular automaton finite volume method for microstructure evolution during additive manufacturing

Yanping Lian et al.

MATERIALS & DESIGN (2019)

Add to Collection

Article Engineering, Manufacturing

In-situ characterization and quantification of melt pool variation under constant input energy density in laser powder bed fusion additive manufacturing process

Qilin Guo et al.

ADDITIVE MANUFACTURING (2019)

Add to Collection

Review Automation & Control Systems

A review on machining of NiTi shape memory alloys: the process and post process perspective

Eren Kaya et al.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2019)

Add to Collection

Article Materials Science, Multidisciplinary

Phase field simulation of powder bed-based additive manufacturing

Liang-Xing Lu et al.

ACTA MATERIALIA (2018)

Add to Collection

Article Materials Science, Multidisciplinary

Laser energy absorption behavior of powder particles using ray tracing method during selective laser melting additive manufacturing of aluminum alloy

Ying Yang et al.

MATERIALS & DESIGN (2018)

Add to Collection

Article Physics, Applied

Time-Resolved Absorptance and Melt Pool Dynamics during Intense Laser Irradiation of a Metal

Brian J. Simonds et al.

PHYSICAL REVIEW APPLIED (2018)

Add to Collection

Article Materials Science, Multidisciplinary

In situ absorptivity measurements of metallic powders during laser powder-bed fusion additive manufacturing

Johannes Trapp et al.

APPLIED MATERIALS TODAY (2017)

Add to Collection

Article Materials Science, Multidisciplinary

Additive manufacturing of metals

Dirk Herzog et al.

ACTA MATERIALIA (2016)

Add to Collection

Review Materials Science, Multidisciplinary

The metallurgy and processing science of metal additive manufacturing

W. J. Sames et al.

INTERNATIONAL MATERIALS REVIEWS (2016)

Add to Collection

Article Optics

Metal powder absorptivity: modeling and experiment

C. D. Boley et al.

APPLIED OPTICS (2016)

Add to Collection

Article Optics

Calculation of laser absorption by metal powders in additive manufacturing

C. D. Boley et al.

APPLIED OPTICS (2015)

Add to Collection

Review Materials Science, Multidisciplinary

Metal Additive Manufacturing: A Review

William E. Frazier

JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2014)

Add to Collection

Article Engineering, Multidisciplinary

Micro-end milling of NiTi biomedical alloys, burr formation and phase transformation

R. Piquard et al.

PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY (2014)

Add to Collection

Article Materials Science, Multidisciplinary

Vacuum Evaporation of Pure Metals

Jafar Safarian et al.

METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2013)

Add to Collection

Article Physics, Fluids & Plasmas

Phase-field-based lattice Boltzmann model for incompressible binary fluid systems with density and viscosity contrasts

Y. Q. Zu et al.

PHYSICAL REVIEW E (2013)

Add to Collection

Review Materials Science, Multidisciplinary

Manufacturing and processing of NiTi implants: A review

Mohammad H. Elahinia et al.

PROGRESS IN MATERIALS SCIENCE (2012)

Add to Collection

Article Engineering, Industrial

Relationship of laser absorption to keyhole behavior in high power fiber laser welding of stainless steel and aluminum alloy

Yousuke Kawahito et al.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2011)

Add to Collection

Article Engineering, Industrial

Mesoscopic simulation of selective beam melting processes

Carolin Koerner et al.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2011)

Add to Collection

Article Physics, Applied

Melt pool and keyhole behaviour analysis for deep penetration laser welding

R. Fabbro

JOURNAL OF PHYSICS D-APPLIED PHYSICS (2010)

Add to Collection

Article Automation & Control Systems

Shape-memory materials: a review of technology and applications

Robert Bogue

ASSEMBLY AUTOMATION (2009)

Add to Collection

Review Engineering, Biomedical

Porous NiTi for bone implants: A review

A. Bansiddhi et al.

ACTA BIOMATERIALIA (2008)

Add to Collection

Article Chemistry, Physical

Surface and transport properties of Ni-Ti liquid alloys

R. Novakovic et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2008)

Add to Collection

Article Materials Science, Multidisciplinary

Modeling of laser keyhole welding: Part II. Simulation of keyhole evolution, velocity, temperature profile, and experimental verification

H Ki et al.

METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2002)

Add to Collection

Article Thermodynamics

Non-contact measurements of surface tension and viscosity of niobium, zirconium, and titanium using an electrostatic levitation furnace

PF Paradis et al.

INTERNATIONAL JOURNAL OF THERMOPHYSICS (2002)

Add to Collection

Article Materials Science, Multidisciplinary

Properties of liquid nickel: A critical comparison of EAM and MEAM calculations

FJ Cherne et al.

PHYSICAL REVIEW B (2002)

Add to Collection

© Peeref 2019-2024. All rights reserved.