☆ 4.7 Article

Twinned dendrites growth in wire arc directed energy deposition of Al-Zn-Mg-Cu alloy

MATERIALS & DESIGN (2023)

Related references

Note: Only part of the references are listed.

Article Chemistry, Physical

Niobium nanoparticle-enabled grain refinement of a crack-free high strength Al-Zn-Mg-Cu alloy manufactured by selective laser melting

Fei Xiao et al.

Summary: The primary Al3Nb with tetragonal D0(22) structure was found to be extremely effective in grain refinement for Al-Zn-Mg-Cu alloys during selective laser melting. Adding 1.5wt% Nb nanoparticles transformed columnar crystals into fine equiaxed crystals, eliminating defects such as cracks and porosity. Due to the high number density of primary Al3Nb and coherent interface with the Al matrix, the alloy exhibited excellent mechanical properties after T6 heat treatment.

JOURNAL OF ALLOYS AND COMPOUNDS (2022)

Add to Collection

Article Chemistry, Physical

Effect of Molten Pool Spatial Arrangement on Texture Evolution in Pulsed Laser Additive Manufacturing of Inconel 718

Manping Cheng et al.

Summary: This study investigated the epitaxial growth of dendrites and texture evolution by changing various parameters during laser additive manufacturing. It was found that in a short pulse period, dendrites can grow directly epitaxially and form a strong fiber texture.

MATERIALS (2022)

Add to Collection

Article Metallurgy & Metallurgical Engineering

Influence of minor Sc additions on grain refinement and microstructure characteristics of a high Zn-containing Al-Zn-Mg-Cu-Zr alloy

Wen Kai et al.

Summary: In this study, scandium was added to an Al-Zn-Mg-Cu-Zr alloy, and the effects of different scandium contents on the microstructure of the alloy were investigated. The results showed that scandium addition can refine the grain size and reduce the content of the AlZnMgCu eutectic phase.

JOURNAL OF CENTRAL SOUTH UNIVERSITY (2022)

Add to Collection

Article Automation & Control Systems

Forming characteristics and mechanism of variable polarity TIG-based wire arc additive manufacturing of Al-Mg-Zn-Cu alloy

Xiaoyu Cai et al.

Summary: Single-pass multi-layer and multi-pass multi-layer Al-Mg-Zn-Cu alloy components were fabricated using variable polarity TIG-based wire arc additive manufacturing. The study focused on the forming and molten pool flow of the components. A mathematical model was established to predict the geometric features of the deposited layers, and simulation calculations were performed to analyze the liquid metal flow behavior in the molten pool.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2022)

Add to Collection

Article Chemistry, Physical

Grain refinement and mechanical properties improvement of Inconel 625 alloy fabricated by ultrasonic-assisted wire and arc additive manufacturing

Yuhua Chen et al.

Summary: Ultrasound-assisted wire and arc additive manufacturing (WAAM) can disrupt the growth of columnar grains, promote the transformation of grain orientation, improve material performance, and reduce anisotropy.

JOURNAL OF ALLOYS AND COMPOUNDS (2022)

Add to Collection

Article Nanoscience & Nanotechnology

Regionalization of microstructure characteristics and mechanisms of slip transmission in oriented grains deposited by wire arc additive manufacturing

Feiyue Lyu et al.

Summary: The regionalization of microstructure regulation and mechanical property adjustment during the thermal cycle plays a vital role in the grain morphology and orientation of aluminum alloy components manufactured using wire arc additive manufacturing technology. However, the microscopic mechanism of the mechanical property difference caused by uneven microstructure in different regions remains unclear for the WAAM 2319 alloy.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2022)

Add to Collection

Article Engineering, Manufacturing

A three-dimensional wire-feeding model for heat and metal transfer, fluid flow, and bead shape in wire plasma arc additive manufacturing

Xin Chen et al.

Summary: A three-dimensional wire-feeding model was developed to study the transient coupling behavior in wire plasma arc additive manufacturing. The model included a novel surface heat source model and an improved momentum source of the arc force. Simulation results agreed reasonably with experimental data, showing three different metal transfer modes as wire-feeding speed increased. The effects of arc shading and metal transfer on melt pool dynamics and bead shape were discussed.

JOURNAL OF MANUFACTURING PROCESSES (2022)

Add to Collection

Article Multidisciplinary Sciences

Controlling solid-liquid interfacial energy anisotropy through the isotropic liquid

Lei Wang et al.

NATURE COMMUNICATIONS (2020)

Add to Collection

Article Materials Science, Multidisciplinary

Phase-field simulations and microstructural analysis of epitaxial growth during rapid solidification of additively manufactured AlSi10Mg alloy

Jiwon Park et al.

MATERIALS & DESIGN (2020)

Add to Collection

Article Thermodynamics

Sinusoidal oscillating laser welding of 7075 aluminum alloy: Hydrodynamics, porosity formation and optimization

Tongtong Liu et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2019)

Add to Collection

Article Optics

Effect of process parameters on formability and surface quality of selective laser melted Al-Zn-Sc-Zr alloy from single track to block specimen

Jiang Bi et al.

OPTICS AND LASER TECHNOLOGY (2019)

Add to Collection

Article Nanoscience & Nanotechnology

Microstructure and tensile property of a novel AlZnMgScZr alloy additively manufactured by gas atomization and laser powder bed fusion

Le Zhou et al.

SCRIPTA MATERIALIA (2019)

Add to Collection

Article Materials Science, Multidisciplinary

Dendrite orientation transition in Al-Ge alloys

M. Becker et al.

ACTA MATERIALIA (2019)

Add to Collection

Article Crystallography

TEM investigations on twin boundary structures of feathery crystals in aluminum alloys during Bridgman solidification

Luyan Yang et al.

JOURNAL OF CRYSTAL GROWTH (2018)

Add to Collection

Article Metallurgy & Metallurgical Engineering

Formation of twinned dendrites during unidirectional solidification of Al-32%Zn alloy

Zhong-wei Chen et al.

TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA (2018)

Add to Collection

Article Nanoscience & Nanotechnology

Microstructure and properties of twinned dendrites in directionally solidified A356 alloy

Yang Li et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)

Add to Collection

Article Materials Science, Multidisciplinary

Influence of icosahedral short range order on diffusion in liquids: A study on Al-Zn-Cr alloys

Guven Kurtuldu et al.

ACTA MATERIALIA (2016)

Add to Collection

Article Materials Science, Multidisciplinary

Twinned dendrite growth during Bridgman solidification

Luyan Yang et al.

ACTA MATERIALIA (2015)

Add to Collection

Article Materials Science, Multidisciplinary

Influence of Cr on the nucleation of primary Al and formation of twinned dendrites in Al-Zn-Cr alloys: Can icosahedral solid clusters play a role?

Gueven Kurtuldu et al.

ACTA MATERIALIA (2013)

Add to Collection

Article Materials Science, Multidisciplinary

Morphology and Growth Kinetic Advantage of Quenched Twinned Dendrites in Al-Zn Alloys

Mario A. Salgado-Ordorica et al.

METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2013)

Add to Collection

Article Materials Science, Multidisciplinary

Dendritic Growth Morphologies in Al-Zn Alloys-Part I: X-ray Tomographic Microscopy

Jonathan Friedli et al.

METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2013)

Add to Collection

Article Materials Science, Multidisciplinary

Study of the twinned dendrite tip shape I: Phase-field modeling

M. A. Salgado-Ordorica et al.

ACTA MATERIALIA (2011)

Add to Collection

Article Materials Science, Multidisciplinary

Study of the twinned dendrite tip shape II: Experimental assessment

M. A. Salgado-Ordorica et al.

ACTA MATERIALIA (2011)

Add to Collection

Article Materials Science, Multidisciplinary

Influence of convection on feathery grain formation in aluminum alloys

S Henry et al.

METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2004)

Add to Collection

© Peeref 2019-2024. All rights reserved.