Related references
Note: Only part of the references are listed.Variant selection, coarsening behavior of α phase and associated tensile properties in an α plus β titanium alloy
Lei Lei et al.
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2022)
Heterogeneous quenching and partitioning from manganese-partitioned pearlite: retained austenite modification and formability improvement
Chao Zhang et al.
ACTA MATERIALIA (2022)
Development of Ti-Al-Ta-Nb-(Re) near-α high temperature titanium alloy: Microstructure, thermal stability and mechanical properties
Juan Li et al.
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2022)
Effect of αp/βtrans interfacial microstructure on tensile property and deformation behavior in Ti6242 alloys
Hang Luo et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2022)
Tensile deformation behaviors of Ti-6.5Al-3.5Mo-1.5Zr-0.25Si alloy with different percentages of primary a phase
Z. Shao et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2022)
Creep deformation and strength evolution mechanisms of a Ti-6Al-4V alloy during stress relaxation at elevated temperatures from elastic to plastic loading
Ying Zhang et al.
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2022)
Effects of heating rate on the alloy element partitioning and mechanical properties in equiaxed alpha-beta Ti-6Al-4V alloy
Jinhu Zhang et al.
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2021)
A novel strategy for developing α plus β dual-phase titanium alloys with low Young's modulus and high yield strength
Yu Fu et al.
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2021)
Study on the intrinsic factors determining impact toughness of TC21 alloy
Lei Lei et al.
MATERIALS CHARACTERIZATION (2021)
Microstructural manipulation and improved mechanical properties of a near α titanium alloy
C. J. Zhang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2020)
Flash-butt welded Ti6242 joints preserved base-material strength and ductility
Pingwei Xu et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2020)
Dynamic recrystallization mechanism and improved mechanical properties of a near α high temperature titanium alloy processed by severe plastic deformation
Yonggang Sun et al.
MATERIALS CHARACTERIZATION (2020)
Chemical boundary engineering: A new route toward lean, ultrastrong yet ductile steels
Ran Ding et al.
SCIENCE ADVANCES (2020)
Precipitation behavior and strengthening-toughening mechanism of hot rolled sheet of Ti65 titanium alloy during aging process
Zhixin Zhang et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2020)
Effects of direct aging on near-alpha Ti-6Al-2Sn-4Zr-2Mo (Ti-6242) titanium alloy fabricated by selective laser melting (SLM)
Haiyang Fan et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2020)
Better mechanical properties via uniform microstructure architecture in flash-butt welded TA19 joints
Mengnan Li et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2020)
Improved tensile properties of a novel near-α titanium alloy via tailoring microstructure by hot-rolling
Yu Su et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2020)
Microstructural evolution and mechanical properties of hot-rolled Ti-30Zr-5Al-2.5Sn alloy with mixed α and α′ phases
Wei Ma et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2020)
Ex-situ study on mechanical properties and deformation mechanism of three typical microstructures in TA19 titanium alloy
Yu Zhou et al.
MATERIALS CHARACTERIZATION (2020)
On the role of chemical heterogeneity in phase transformations and mechanical behavior of flash annealed quenching & partitioning steels
Geng Liu et al.
ACTA MATERIALIA (2020)
Microstructure evolution mechanism and mechanical properties of TC11-TC17 dual alloy after annealing treatment
Yuanhang Chen et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2020)
Microstructural effects on strain rate and dwell sensitivity in dual-phase titanium alloys
Sana Waheed et al.
ACTA MATERIALIA (2019)
Micromechanical behavior and thermal stability of a dual-phase α plus α′ titanium alloy produced by additive manufacturing
Charlotte de Formanoir et al.
ACTA MATERIALIA (2019)
The dislocation behaviour and GND development in a nickel based superalloy during creep
Soran Birosca et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2019)
Influence of thermal treatment on element partitioning in α plus β titanium alloy
Sensen Huang et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2019)
Real-time nanoscale observation of deformation mechanisms in CrCoNi-based medium- to high-entropy alloys at cryogenic temperatures
Qingqing Ding et al.
MATERIALS TODAY (2019)
The role of lattice defects, element partitioning and intrinsic heat effects on the microstructure in selective laser melted Ti-6Al-4V
Jan Haubrich et al.
ACTA MATERIALIA (2019)
Temperature-gradient induced microstructure evolution in heat-affected zone of electron beam welded Ti-6Al-4V titanium alloy
Shilin Zhang et al.
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2019)
Yielding nature and Hall-Petch relationships in Ti-6Al-4V alloy with fully equiaxed and bimodal microstructures
Yan Chong et al.
SCRIPTA MATERIALIA (2019)
Microstructure and Mechanical Properties of Electron Beam Welded Titanium Alloy Ti-6246
Guoqiang Wang et al.
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2018)
Effect of deformation of constituent phases on mechanical properties of Ti-6.5A1-3.5Mo-1.5Zr-0.3Si titanium alloy
Zhe Ji et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)
Microstructural evolution and its effect on the mechanical behavior of Ti-5Al-5Mo-5V-3Cr alloy during aging
Baozhen Jiang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)
Advanced high strength steel (AHSS) development through chemical patterning of austenite
W. W. Sun et al.
SCRIPTA MATERIALIA (2018)
Effect of complex combined loading mode on the fracture toughness of titanium alloys
M. G. Chausov et al.
VACUUM (2018)
Electron beam melting of boron-modified Ti-6Al-2Sn-4Zr-2Mo-0.1Si alloy with superior tensile strength and oxidation resistance at elevated temperatures
Tadashi Fujieda et al.
MATERIALIA (2018)
Effect of microstructure on tensile properties of Ti-5Al-5Mo-5V-3Cr-1Zr alloy
Chaowen Huang et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2017)
A study of epitaxial growth behaviors of equiaxed alpha phase at different cooling rates in near alpha titanium alloy
Xiongxiong Gao et al.
ACTA MATERIALIA (2017)
Effect of nanoscale α2 precipitation on strain localisation in a two-phase Ti-alloy
D. Lunt et al.
ACTA MATERIALIA (2017)
Role of element partitioning on the α-β phase transformation kinetics of a bi-modal Ti-6Al-6V-2Sn alloy during continuous heating
Pere Barriobero-Vila et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2015)
Heterogeneous lamella structure unites ultrafine-grain strength with coarse-grain ductility
Xiaolei Wu et al.
PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA (2015)
Effect of retained beta layer on slip transmission in Ti-6Al-2Zr-1Mo-1V near alpha titanium alloy during tensile deformation at room temperature
Dong He et al.
MATERIALS & DESIGN (2014)
Effects of degree of deformation on the microstructure, mechanical properties and texture of hybrid-reinforced titanium matrix composites
Xianglong Guo et al.
ACTA MATERIALIA (2012)
Heat treatment of Ti6Al4V produced by Selective Laser Melting: Microstructure and mechanical properties
Bey Vrancken et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2012)
Microstructural and Residual Stress Development due to Inertia Friction Welding in Ti-6246
Moataz M. Attallah et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2012)
Titanium alloy production technology, market prospects and industry development
Cui Chunxiang et al.
MATERIALS & DESIGN (2011)
Share Paper
