Related references
Note: Only part of the references are listed.Process optimization for acidic leaching of rare earth elements (REE) from waste electrical and electronic equipment (WEEE)
Ayse Yuksekdag et al.
ENVIRONMENTAL SCIENCE AND POLLUTION RESEARCH (2022)
Novel formulations of metal-organic frameworks for controlled drug delivery
Congying Rao et al.
EXPERT OPINION ON DRUG DELIVERY (2022)
Recent advances of the core-shell MOFs in tumour therapy
Yana Zeng et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2022)
The role of thiosulfate and sulfite in gold thiosulfate electrowinning process: An electrochemical view
Masih Soleymani et al.
PROCESS SAFETY AND ENVIRONMENTAL PROTECTION (2022)
Recent advances in Ti-based MOFs in biomedical applications
Jinyi Chen et al.
DALTON TRANSACTIONS (2022)
Thiosulfate leaching of gold catalyzed by hexaamminecobalt(III): Electrochemical behavior and mechanisms
Yan Zhang et al.
ELECTROCHIMICA ACTA (2021)
Recent advances on preparation and environmental applications of MOF-derived carbons in catalysis
Mengjie Hao et al.
SCIENCE OF THE TOTAL ENVIRONMENT (2021)
Adsorption of gold from waste mobile phones by biochar and activated carbon in gold iodized solution
Wanying Zhou et al.
WASTE MANAGEMENT (2021)
Simple and near-zero-waste processing for recycling gold at a high purity level from waste printed circuit boards
Isabel F. F. Neto et al.
WASTE MANAGEMENT (2021)
Preliminary Study on Gold Recovery from High Grade E-Waste by Thiourea Leaching and Electrowinning
Nicolo Maria Ippolito et al.
MINERALS (2021)
Recovery of gold from sulfide refractory gold ore: Oxidation roasting pretreatment and gold extraction
Hong Qin et al.
MINERALS ENGINEERING (2021)
Recycling copper and gold from e-waste by a two-stage leaching and solvent extraction process
Mudila Dhanunjaya Rao et al.
SEPARATION AND PURIFICATION TECHNOLOGY (2021)
Oxidation Roasting of Fine-Grained Carbonaceous Gold Ore: The Effect of Aeration Rate
Hui Li et al.
MINERALS (2021)
Series of highly stable Cd(II)-based MOFs as sensitive and selective sensors for detection of nitrofuran antibiotic
Shanhe Zhou et al.
CRYSTENGCOMM (2021)
Technoeconomic Assessment of Organic Halide Based Gold Recovery from Waste Electronic and Electrical Equipment
Jamie Wordsworth et al.
RESOURCES-BASEL (2021)
Core-shell gold nanorod@mesoporous-MOF heterostructures for combinational phototherapy
Zehao Zhou et al.
NANOSCALE (2021)
Effective adsorption of AuCl4- by functionalized D301 resin: kinetics, isotherms and selectivity
Xiao-Yan Xue et al.
JOURNAL OF DISPERSION SCIENCE AND TECHNOLOGY (2020)
Recycling of gold from waste electronic components of devices
Rekha Panda et al.
KOREAN JOURNAL OF CHEMICAL ENGINEERING (2020)
The use of new modified activated carbon in thiosulfate solution: A green gold recovery technology
Yunlong Chen et al.
SEPARATION AND PURIFICATION TECHNOLOGY (2020)
Structure regulated catalytic performance of gold nanocluster-MOF nanocomposites
Yanfei Zhu et al.
NANO RESEARCH (2020)
Solvent Extraction of Gold(III) with Diethyl Carbonate
Stijn Raiguel et al.
ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2020)
Technology of Gold Extraction from Mature Dumps by Thiourea Leaching
I. R. Boboev et al.
RUSSIAN JOURNAL OF NON-FERROUS METALS (2020)
Modification of activated carbon by chemical vapour deposition through thermal decomposition of thiourea for enhanced adsorption of gold thiosulfate complex
Chaowu Wang et al.
SEPARATION AND PURIFICATION TECHNOLOGY (2020)
Europium metal-organic framework containing helical metal-carboxylate chains for fluorescence sensing of nitrobenzene and nitrofunans antibiotics
Shuang-Li Sun et al.
JOURNAL OF SOLID STATE CHEMISTRY (2020)
The effect of granite powder on mechanical, structural and water absorption characteristics of alkali treated cordia dichotoma fiber reinforced polyester composite
B. Madhusudhan Reddy et al.
POLYMER TESTING (2020)
Recovery of gold ions from discarded mobile phone leachate by solvent extraction and polymer inclusion membrane (PIM) based separation using an amic acid extractant
Fukiko Kubota et al.
SEPARATION AND PURIFICATION TECHNOLOGY (2019)
Activated carbon adsorption of gold from cyanide-starved glycine solutions containing copper. Part 2: Kinetics
P. J. Tauetsile et al.
SEPARATION AND PURIFICATION TECHNOLOGY (2019)
Kinetic studies of gold leaching from a gold concentrate calcine by thiosulfate with cobalt-ammonia catalysis and gold recovery by resin adsorption from its pregnant solution
Bin Xu et al.
SEPARATION AND PURIFICATION TECHNOLOGY (2019)
Electrocatalytic Determination of Hg(II) by the Modified Carbon Paste Electrode with Sn(IV)-Clinoptilolite Nanoparticles
Tahmineh Tamiji et al.
ELECTROCATALYSIS (2019)
Precious metals recovery from waste printed circuit boards using thiosulfate leaching and ion exchange resin
Sebastian Gamez et al.
HYDROMETALLURGY (2019)
Kinetic Investigation and Dissolution Behavior of Cyanide Alternative Gold Leaching Reagents
Alexander Birich et al.
SCIENTIFIC REPORTS (2019)
Evaluation of Simple Amides in the Selective Recovery of Gold from Secondary Sources by Solvent Extraction
Euan D. Doidge et al.
ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2019)
Metal-organic framework (MOF-5) coated SERS active gold gratings: A platform for the selective detection of organic contaminants in soil
O. Guselnikova et al.
ANALYTICA CHIMICA ACTA (2019)
Electrocatalytic behavior of AgBr NPs as modifier of carbon past electrode in the presence of methanol and ethanol in aqueous solution: A kinetic study
Tahmineh Tamiji et al.
JOURNAL OF THE TAIWAN INSTITUTE OF CHEMICAL ENGINEERS (2019)
Eco-friendly and economical gold extraction by nickel catalyzed ammoniacal thiosulfate leaching-resin adsorption recovery
Bin Xu et al.
JOURNAL OF CLEANER PRODUCTION (2019)
Failure investigation of stainless steel anodes used in gold electrowinning
Maysam Mohammadi et al.
ENGINEERING FAILURE ANALYSIS (2019)
Sensitive voltammetric determination of bromate by using ion-exchange property of a Sn(II)-clinoptilolite-modified carbon paste electrode
Tahmineh Tamiji et al.
JOURNAL OF SOLID STATE ELECTROCHEMISTRY (2019)
Recovery of gold in iodine-iodide system - a review
C. J. Liang et al.
SEPARATION SCIENCE AND TECHNOLOGY (2019)
EDTA-functionalized clinoptilolite nanoparticles as an effective adsorbent for Pb(II) removal
Farahnaz Eshraghi et al.
ENVIRONMENTAL SCIENCE AND POLLUTION RESEARCH (2018)
Alkaline cyanide leaching of refractory gold flotation concentrates and bio-oxidised products: The effect of process variables
Richmond K. Asamoah et al.
HYDROMETALLURGY (2018)
Recovery of Gold and Silver from Secondary Sources of Electronic Waste Processing by Thiourea Leaching
Hyunju Lee et al.
JOM (2018)
A review of recent studies into hydrometallurgical methods for recovering PGMs from used catalytic converters
Collins Saguru et al.
HYDROMETALLURGY (2018)
Screening of Non-cyanide Leaching Reagents for Gold Recovery from Waste Electric and Electronic Equipment
Alexander Birich et al.
JOURNAL OF SUSTAINABLE METALLURGY (2018)
Adsorption of gold ion from a solution using montmorillonite/alginate composite
Anuwati Mourpichai et al.
MATERIALS TODAY-PROCEEDINGS (2018)
A novel bio-oxidation and two-step thiourea leaching method applied to a refractory gold concentrate
Yujie Guo et al.
HYDROMETALLURGY (2017)
Specific Recovery and In Situ Reduction of Precious Metals from Waste To Create MOF Composites with Immobilized Nanoclusters
Chao Wu et al.
INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2017)
A novel and sensitive carbon paste electrode with clinoptilolite nano particles containing hexadecyltrimethyl ammonium surfactant and dithizone for the voltammetric determination of Sn(II)
Azin Niknezhadi et al.
JOURNAL OF COLLOID AND INTERFACE SCIENCE (2017)
A comprehensive study on electrocatalytic current of urea oxidation by modified carbon paste electrode with Ni(II)-clinoptilolite nanoparticles: Experimental design by response surface methodology
Azin Ahmadi et al.
JOURNAL OF ELECTROANALYTICAL CHEMISTRY (2017)
Recovery of rare and precious metals from urban mines-A review
Mengmeng Wang et al.
FRONTIERS OF ENVIRONMENTAL SCIENCE & ENGINEERING (2017)
Microwave Pretreatment for Thiourea Leaching for Gold Concentrate
Nag-Choul Choi et al.
METALS (2017)
Recovery of Gold from Pregnant Thiosulfate Solutions by the Resin Adsorption Technique
Zhonglin Dong et al.
METALS (2017)
A Review of Thiosulfate Leaching of Gold: Focus on Thiosulfate Consumption and Gold Recovery from Pregnant Solution
Bin Xu et al.
METALS (2017)
High catalytic activity of Fe(II)-clinoptilolite nanoparticales for indirect voltammetric determination of dichromate: Experimental design by response surface methodology (RSM)
Motahare Nosuhi et al.
ELECTROCHIMICA ACTA (2017)
AN EXPERIMENTAL STUDY ON GOLD PRECIPITATION FROM LEACH SOLUTIONS OF TECHNOGENIC GOLD-BEARING RAW MATERIALS
A. V. Taskin et al.
JOURNAL OF FUNDAMENTAL AND APPLIED SCIENCES (2017)
Determination of the potential gold electrowinning from an ammoniacal thiosulphate solution applied to recycling of printed circuit board scraps
Angela C. Kasper et al.
WASTE MANAGEMENT & RESEARCH (2016)
DTDGA-Impregnated XAD-16 Beads for Separation of Gold from Electronic Waste Solutions
Anant B. Kanagare et al.
INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2016)
A review of current progress of recycling technologies for metals from waste electrical and electronic equipment
Lingen Zhang et al.
JOURNAL OF CLEANER PRODUCTION (2016)
An oxalate selective electrode based on modified PVC-membrane with tetra-butylammonium - Clinoptilolite nanoparticles
Zohre Hoseini et al.
MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2016)
Recovery of gold from waste electrical and electronic equipment (WEEE) using ammonium persulfate
Andrea Alzate et al.
WASTE MANAGEMENT (2016)
Separation and recovery of gold from waste LED using ion exchange method
Hironori Murakami et al.
HYDROMETALLURGY (2015)
Clinoptilolite nano-particles modified with aspartic acid for removal of Cu(II) from aqueous solutions: isotherms and kinetic aspects
Maryam Heidari-Chaleshtori et al.
NEW JOURNAL OF CHEMISTRY (2015)
Thermodynamic and kinetic of iodine-iodide leaching in gold hydrometallurgy
S. S. Konyratbekova et al.
TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA (2015)
Treatment of copper-rich gold ore by cyanide leaching, ammonia pretreatment and ammoniacal cyanide leaching
A. D. Bas et al.
TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA (2015)
Precious metal recovery from waste printed circuit boards using cyanide and non-cyanide lixiviants - A review
Ata Akcil et al.
WASTE MANAGEMENT (2015)
Wastes could be resources and cities could be mines
Jinhui Li
WASTE MANAGEMENT & RESEARCH (2015)
Non-cyanide Leaching Processes in Gold Hydrometallurgy and Iodine-Iodide Applications: A Review
Saltanat Sabitovna Konyratbekova et al.
MINERAL PROCESSING AND EXTRACTIVE METALLURGY REVIEW (2015)
Recycling gold and copper from waste printed circuit boards using chlorination process
Yuchen He et al.
RSC ADVANCES (2015)
Sorption of Gold from Electronic Waste Solutions by a Commercial Sorbent
M. H. Morcali et al.
CHEMICAL ENGINEERING COMMUNICATIONS (2014)
Effect of a nano-sized natural clinoptilolite modified by the hexadecyltrimethyl ammonium surfactant on cephalexin drug delivery
Alireza Nezamzadeh-Ejhieh et al.
COMPTES RENDUS CHIMIE (2014)
Production of copper from minerals through controlled and sustainable electrochemistry
Aphichart Rodchanarowan et al.
ELECTROCHIMICA ACTA (2014)
Selective recovery of gold on functionalized resins
Magdalena Pilsniak-Rabiega et al.
HYDROMETALLURGY (2014)
Voltammetric determination of riboflavin based on electrocatalytic oxidation at zeolite-modified carbon paste electrodes
Alireza Nezamzadeh-Ejhieh et al.
JOURNAL OF INDUSTRIAL AND ENGINEERING CHEMISTRY (2014)
Investigation of potential conjugate adsorbent for efficient ultra-trace gold(III) detection and recovery
Md Rabiul Awual
JOURNAL OF INDUSTRIAL AND ENGINEERING CHEMISTRY (2014)
An advanced study on the hydrometallurgical processing of waste computer printed circuit boards to extract their valuable content of metals
Ionela Birloaga et al.
WASTE MANAGEMENT (2014)
Recovery of gold and silver from spent mobile phones by means of acidothiourea leaching followed by adsorption using biosorbent prepared from persimmon tannin
Manju Gurung et al.
HYDROMETALLURGY (2013)
Study on gold concentrate leaching by iodine-iodide
Hai-xia Wang et al.
INTERNATIONAL JOURNAL OF MINERALS METALLURGY AND MATERIALS (2013)
Recycling of rare earths: a critical review
Koen Binnemans et al.
JOURNAL OF CLEANER PRODUCTION (2013)
Modification of clinoptilolite nano-particles with hexadecylpyridynium bromide surfactant as an active component of Cr(VI) selective electrode
Alireza Nezamzadeh-Ejhieh et al.
JOURNAL OF INDUSTRIAL AND ENGINEERING CHEMISTRY (2013)
Study on the influence of various factors in the hydrometallurgical processing of waste printed circuit boards for copper and gold recovery
Ionela Birloaga et al.
WASTE MANAGEMENT (2013)
Process development for recovery of copper and precious metals from waste printed circuit boards with emphasize on palladium and gold leaching and precipitation
Ali Behnamfard et al.
WASTE MANAGEMENT (2013)
Thiocyanate hydrometallurgy for the recovery of gold. Part IV: Solvent extraction of gold with Alamine 336
Jinshan Li et al.
HYDROMETALLURGY (2012)
Ion exchange recovery of gold from iodine-iodide solutions
Hongguang Zhang et al.
HYDROMETALLURGY (2012)
Recovery of gold from secondary sources-A review
S. Syed
HYDROMETALLURGY (2012)
Aqueous metal recovery techniques from e-scrap: Hydrometallurgy in recycling
A. Tuncuk et al.
MINERALS ENGINEERING (2012)
Thiourea leaching gold and silver from the printed circuit boards of waste mobile phones
Li Jing-ying et al.
WASTE MANAGEMENT (2012)
Biooxidation Pretreatment Cyanide Leaching of a Flotation Gold Concentrate
Chao Zhu et al.
FRONTIERS OF MATERIALS, CHEMICAL AND METALLURGICAL TECHNOLOGIES, PTS 1 AND 2 (2012)
Adsorption of gold(III) from waste rinse water of semiconductor manufacturing industries using Amberlite XAD-7HP resin
Nghiem Van Nguyen et al.
GOLD BULLETIN (2011)
Selective recovery of gold from waste mobile phone PCBs by hydrometallurgical process
Eun-young Kim et al.
JOURNAL OF HAZARDOUS MATERIALS (2011)
Leaching copper from shredded particles of waste printed circuit boards
Haiyu Yang et al.
JOURNAL OF HAZARDOUS MATERIALS (2011)
Hydrometallurgical treatment of used printed circuit boards after thermal treatment
T. Havlik et al.
WASTE MANAGEMENT (2011)
Sequential process of sorption and incineration for recovery of gold from cyanide solutions: Comparison of ion exchange resin, activated carbon and biosorbent
In Seob Kwak et al.
CHEMICAL ENGINEERING JOURNAL (2010)
Ion exchange adsorption and elution for recovering gold thiosulfate from leach solutions
M. I. Jeffrey et al.
HYDROMETALLURGY (2010)
Thiosulfate leaching of gold from waste mobile phones
Vinh Hung Ha et al.
JOURNAL OF HAZARDOUS MATERIALS (2010)
Comparative leaching of a sulfidic gold ore in ionic liquid and aqueous acid with thiourea and halides using Fe(III) or HSO5- oxidant
J. A. Whitehead et al.
HYDROMETALLURGY (2009)
Ion-exchange recovery of gold(I) and silver(I) from thiosulfate solutions
O. N. Kononova et al.
RUSSIAN JOURNAL OF PHYSICAL CHEMISTRY A (2009)
Adsorption properties of Ag(I), Au(III), Pd(II) and Pt(IV) ions on commercial 717 anion-exchange resin
Liu Peng et al.
TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA (2009)
Adsorption of gold(III), platinum(W) and palladium(II) onto glycine modified crosslinked chitosan resin
A. Ramesh et al.
BIORESOURCE TECHNOLOGY (2008)
Mechanical properties and styrene emission levels of a UV-cured glass-fibre/vinylester composite
P. Compston et al.
COMPOSITE STRUCTURES (2008)
Metallurgical recovery of metals from electronic waste: A review
Jirang Cui et al.
JOURNAL OF HAZARDOUS MATERIALS (2008)
A proposed mechanism for nitrate and thiocyanate elution of strong-base ion exchange resins loaded with copper and gold cyanocomplexes
Adelia M. Oliveira et al.
REACTIVE & FUNCTIONAL POLYMERS (2008)
Leaching and CIL processes in gold recovery from refractory ore with thiourea solutions
N. Gonen et al.
MINERALS ENGINEERING (2007)
Kinetics and mechanism of leaching synthetic calaverite in cyanide solutions
G. Deschenes et al.
MINERALS & METALLURGICAL PROCESSING (2006)
Leaching of gold and copper minerals in cyanide deficient copper solutions
PL Breuer et al.
HYDROMETALLURGY (2005)
The behaviour of carbonaceous matter in cyanide leaching of gold
H Tan et al.
HYDROMETALLURGY (2005)
Gold(III) recovery using synthetic chelating resins with amine, thio and amine/mercaptan functionalities
AM Donia et al.
SEPARATION AND PURIFICATION TECHNOLOGY (2005)
Recovery of precious metals from electronic scrap by hydrometallurgical processing routes
P Quinet et al.
MINERALS & METALLURGICAL PROCESSING (2005)
Processing of residual gold (III) solutions via ion exchange
FJ Alguacil et al.
GOLD BULLETIN (2005)
The use of ion exchange resins for the treatment of cyanidation tailings. Part 2 - pilot plant testing
K Fernando et al.
MINERALS ENGINEERING (2005)
The recovery of gold from ammoniacal thiosulfate solutions containing copper using ion exchange resin columns
HG Zhang et al.
HYDROMETALLURGY (2004)
Leaching of finely disseminated gold ore with cyanide and thiourea solutions
N Gönen
HYDROMETALLURGY (2003)
The adsorption of gold and copper onto ion-exchange resins from ammoniacal thiosulfate solutions
HG Zhang et al.
HYDROMETALLURGY (2002)
Recovering gold from thiosulfate leach pulps via ion exchange
MJ Nicol et al.
JOM-JOURNAL OF THE MINERALS METALS & MATERIALS SOCIETY (2002)
The treatment of copper-gold ores by ammonium thiosulfate leaching
E Molleman et al.
HYDROMETALLURGY (2002)
Cyanide recovery in hydrometallurgical plants: use of synthetic solutions constituted by metallic cyanide complexes
GL Miltzarek et al.
MINERALS ENGINEERING (2002)
Thiosulfate leaching of gold - A review
MG Aylmore et al.
MINERALS ENGINEERING (2001)
Improved recovery of trace amounts of gold (III), palladium (II) and platinum (IV) from large amounts of associated base metals using anion-exchange resins
I Matsubara et al.
FRESENIUS JOURNAL OF ANALYTICAL CHEMISTRY (2000)
The cyanide leaching of gold in solutions containing sulfide
MI Jeffrey et al.
MINERALS ENGINEERING (2000)